REPAIR TO AC/CGI SHEETS, FALSE CEILING, WALL PANNELING AND PERIODICAL SERVICES TO OTM ACCN UNDER AGE BR (P) AT ITARANA ALWAR

Amount

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness, including cover fillets complete all as specified.

Dismantling AC/CGI sheet (Corrugated, Semi corrugated etc) as in roofs etc complete all as specified.

M&L for false ceiling with Armgyp-FB ceiling tiles of size 595 x 595mm, 9mm thick (as approved by GE) fixed with and including galvanized iron powder coated inverted ‘Tee’ or ‘L’ section (concealed GI frame work) suspended from ceiling with provision of galvanized wire 4 mm dia and wall taping screw including butterfly clips, hold down clips for fixing the board to frame complete all as per manufacturer’s instructions, complete, all as directed and specified. (a) Size of grid – 610 x 610 mm. (b) Size of main Tee – 39 x 24.70 x 0.80 mm. (c) Size of cross Tee – 39 x 24.70 x 0.80 mm. (d) Size of wall angle – 22.20 x 22.20 x 0.65 mm.

M&L for false ceiling with Armgyp-FB ceiling tiles of size 595 x 595mm, 9mm thick (as approved by GE) fixed complete, all as directed and specified.

Supply and fixing 6 mm thick asbestos cement, corrugated or semi corrugated sheets in roofs, walls etc and fixed with ‘L’ type or ‘J’ type or cranked hooks bolts complete all as specified.

All as per srl item No 5.00 here-in-above but except sheets. Note : Old serviceable sheets retrived from serial item No 4.00 here-in-before shall be used under this item.

M&L 6 mm thick asbestos cement two piece adjustable serrated ridge for corrugated or semi corrugated sheets fixed with ‘L’ type or J type or cranked hook bolt complete all as specified.

All as per serial item No 7.00 here-in-before but except ridges. Note : Old serviceable ridges retrieved from serial item No. 4.00 here-in-before shall be used under this item.

S&F solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing given in SSR. Note :- PVC fillets & PVC strips shall be measured and paid for separately.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specifications and drawing given in SSR.

S&F mild steel framed work as in doors / gates / steel frames etc. of angle or other section with gusset plates, rails, braces, etc., complete of Gde E-165(Fe 290), drilled for fixing of steel sheeting or other covering including necessary welding etc and fixing in position complete.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or ‘L’ type or ‘J’ type or cranked hooks bolts complete all as specified & directed.

M & L for Cutting holes in stone walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3, exc half brick & not exc one brick (Depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall)

S&F 0.63mm thick plain galvanized mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length & girth as fixed) with grade of Zinc coating 275 complete all as specified & as directed.

Dismantling timber scantling 40 sqcm and over in section in unframed work in any position complete all as specified.

S&F rolled mild steel as in Joist, channel, angle or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length directed) and similar work conforming to Gde E-250 (Fe 410-W) quality `A’ all as specified and as directed.

Material and labour preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

Dismantling structural steel work including doors, gates but excluding framed truss etc.

Supply and fixing 2 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with L-type or J-type or cranked hook bolts in roof, wall etc complete all as specified.

M&L preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint all as specified.

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc all as directed.

M&L rendering 15mm thick in cement mortar 1:4 on stone masonry surfaces or surfaces other than fair face of brick work of walls finished even & smooth without using extra cement with water proofing compound (ISI marked) @ 3% by weight of cement complete, all as specified. Note : - Supply only water proofing compound shall be measured and paid for separately.

M&L for rendering 10mm thick in cement mortar 1:6 on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified.

M&L brooming down old decorated surfaces of walls, plastered including cornices, pilasters etc and applying two coats of white wash complete all as specified.

Material and labour preparation of newly plastered surface of walls & applying three coats of white wash complete all as specified.

Material and labour preparation of newly plastered surface of walls & applying two coats of cement base paint over a coat of primer complete all as specified.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over a coat of primer over & including 1mm thick white wall care putty (make-Birla/JK/Asian) all as specified & as directed.

Demolition of brick/stone masonry built in cement/lime mortar of any mix and stacking serviceable stones aside for reuse & removing unserviceable materials in low laying area, complete, all as directed by Engr-in-Charge.

Material and labour brick work with old size sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:4 complete all as specified.

M&L brooming down old decorated surfaces of walls, plastered including cornices, pilasters etc and applying one coats of white wash complete all as specified.

M&L brooming down old decorated plastered/asbestos cement surfaces of ceilings & applying one coats of white wash complete all as specified.

M&L for brooming down old decorated surfaces of wall, plastered or unplastered including cornices, pilasters etc and applying one coat of colour wash, complete, all as specified and directed.

M&L for brooming down old decorated surfaces of wall, plastered or unplastered including cornices, pilasters etc and applying one coats of oil bound distemper of approved shade, complete, all as specified and directed.

M&L for brooming down old decorated surfaces of wall, plastered or unplastered including cornices, pilasters etc and applying two coats of oil bound distemper of approved shade, complete, all as specified and directed.

M&L for preparation of old painted plastered surfaces of any description over 10cm in width or girth and applying one coat of plastic emulsion paint of approved shade/tint all as specified & as directed.

M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over & including 2mm thick white wall care putty (make - Birla / JK / Asian) on walls all as specified & as directed.

M&L preparation of old painted surfaces of wood and wood based material of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint all as specified.

M&L preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint all as specified.

Obliterating old writing of any description not exc 0.1 sqm, with paint to match existing work complete all as specified and directed.

M&L writing letters or figures (Block, Roman, Italic or Indian) not exc. 30cm high with thick synthetic enamel paint of approved tint all as specified & as directed. Make : Berger / Johnson & Nicholson / Asian / Shalimar, 1st quality as approved by GE.

M&L for writing stops, commas, short lines, dashes, hyphens, brackets etc. using thick fluorescent paint of approved tint all as specified & as directed.

M&L for brooming down old decorated surfaces of wall, plastered or unplastered including cornices, pilasters etc and applying one coat of weather proof paint (Apex paint) of approved shade/tint all as specified & as directed.

Supply and fixing as in repairs Ball valves, high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball, screwed for iron pipe 20mm dia (minimum weight 210 gms) complete all as specified and as directed.

M&L complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces and applying one coat of textuure paint over & including 2mm thick white wall care putty (make-Birla / JK / Asian) on walls all as specified & as directed.

M&L preparation of old decorated plastered surfaces of walls and applying one coat of cement base paint of approved shade/tint complete all as specified & as directed.

M&L preparation of old decorated plastered surfaces of walls and applying two coats of cement base paint of approved shade/tint complete all as specified & as directed.

M&L preparation of old treated steel and iron surfaces of any description, not exc. 10 cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint complete all as specified.

M&L rendering 5mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified.

M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and directed.

Supply only integral water proofing compound (ISI marked).

Material and labour preparation of newly plastered/asbestos cement surfaces of ceilings & applying three coats of white wash complete all as specified.

M&L for repair of disturbed/broken brick holes in wall with cement mortar 1:6 including filling of narrow interstices with PCC 1:2:4 type B0 (using 12.5mm aggregate) after and including removal /root out of trees, plants, trunks, grasses and creeps etc from roof or wall, finished with 15 mm plastering in cement mortar 1:6 complete all as specified and directed.

M/S JALANDRA CONSTRUCTIONS

M/s S Amarjit Singh

J.J.ENGINEERING

RISHU RISHANT CONSTRUCTION