N I T /2

ITEM NO: 1 Dismantling of flexible pavements and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately etc. complete. (SSR Item No: 3.10) (PWD-CIVIL SSR) Item Spec: (MORTH 202 )

ITEM NO: 2 Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed.

ITEM NO: 3 Supplying hard murum/ kankar at the road site, including conveying and stacking complete

ITEM NO: 4 Spreading hard murum/ soft murrum/ gravel or kankar for side width complet

ITEM NO: 5 Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc.

ITEM NO: 6 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of.screening/binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Vibratory roller, to the required density. By Mechanical Means - Grading I (Using Screening Type A (13.2) mm Aggregate)

ITEM NO: 7 Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (Non SCADA Item) (SSR Item No: 24.01) (PWD-CIVIL SSR) Item Spec: (Bd. E. 1 Page One Number 287)

ITEM NO: 8 Providing and laying in situ cement concrete M-30 with tremix treatment for 200 mm thickness for Concrete Road is including laying plastic sheet for 125 micron thickness with groove cutting of 4 mm wide and 20 mm deep with necessary refilling with bitumen (excluding reinforcement) with coarse and fine aggregate (natural sand/ VSI grade finely washed crushed sand) etc. complete with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. (Non SCADA Item) (SSR Item No: 5.22a) (PWD-CIVIL SSR) Item Spec: (MORTH 602 )

ITEM NO: 9 Providing and fixing heavy duty inter locking concrete Rubber mould glossy paving blocks of 80 mm thickness of having a strength of 400 Kilogram/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete. (using 100% crushed sand) पुणे, (SSR Item No: 33.54) (PWD-CIVIL SSR) Item Spec: (Bd. M.) RA No. : 5

ITEM NO: 10 Providing and Laying hot applied thermoplastic road marking strip on Bituminous Surface of specified shade/ colour of 2.5 mm thick including 1.5 Refractive index reflectorizing glass beads @ 250gm/sqm.Thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC 35:2015. Initial Dry reflectivity RL shall be > 250 mcd/sqm/lux measured in the initial 7 days and sustained reflectivity RL of 100 mcd/sqm/ lux and Qd of 100 mcd/sqm/lux measured at the end of 2 years by means of a Standard ReflectoMetre of Zehntner, Easylux, Delta make capable of measuring RL & QD both according to IRC 35:2015 clause 15.5. The finished surface to be level, uniform, and free from streaks and holes complete as per direction of Engineer-in-charge and in accordance with applicable specifications. (Refer MORTH Clause 803 for technical Specification and Performance for IRC 35:2015). (SSR Item No: 6.12a) (PWD-CIVIL SSR) Item Spec: (MORTH 803.4)