Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹11.2 LAdmitted-Finance | -13.11% | ₹11.2 L | L1 | Admitted-Finance |
| 2 | L2₹11.8 LAdmitted-Finance | -8.12% | ₹11.8 L | L2 | Admitted-Finance |
Tender Value
₹12.9 L
EMD Value
₹25,760
Closing Date
4 Mar 2026, 6:00 pmClosed
Executive Engineer
Executive Engineer PWD Dn Ratangarh
Remaining Work of RJ-11-03/SDRF/RTGH/ 2025-26 Sub Dn II Ratangarh Section I (Pkg No 3/4)
2026_CEPWD_542658_3
E NIT NO 31/2025-26
Open Tender
Civil Works
15 days
Ratangarh
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
Executive Engineer PWD Dn/MDRISL
₹25,760
Yes
5 Mar 2026
26 Feb 2026
5 Mar 2026
26 Feb 2026
4 Mar 2026
26 Feb 2026
Menasar to Bhinchari
Maintenance of 200 metre km stone by way of refiting of tilted stones repairing with cement mortar, cleaning, repairing and lettering on 200 metre km stone and 5th km stone as per drawing and MoRTH specification Clause 1900 and 2800
Printing letters and figures of any shade with synthtic enamel paint of any approved colour to give an even shade
Painting two coats with superior grade synthetic enamel paint of approved quality to give an even shade including writing lettering and figures with synthetic enamel paint as per IRC specifications.Direction & Place Identification sign boards including painting of posts.
Construction of granular sub-base by providing well graded material, spreading in uniform layers with Tractor Mount Grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per MoRTH Specification Clause 401. For Grading III Material
Supplying filling and stiching of empty cement bags either of plastic or jute with earth available at site of weight not less than 40 kg including ecavation etc. complete
Repair to pot holes and removal of loose material, trimming of sides, cleaning of surface by providing tack coat, 20 mm thick pre-mix carpet and seal coat type B as per MoRTH specification Clause 3004.2
Maintenance of WBM road including filling up of pot holes, ruts and rectifying corrugated surface, damaged edges and ravelling as per MoRTH specification Clause 404
Deepsar to Sulkhaniya
Earthwork in excavation for structures as per drawing and MoRTH specifications Clause 304.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material.Ordinary soil Upto 3 m depth
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and MoRTH specifications Clause 1702, 1703, 2102 & 2104 P.C.C grade M 10 Nominal mix 1:3:6
Stone masonry work in cement mortar in foundation complete as per drawing and MoRTH specifications Clauses 1402, 1405, 2102 & 2104.Random Rubble Masonry In 1:6 cement mortar
Plastering with cement mortar (1:4), 20 mm thick on Stone work
Providing PCC M-20 architectural coping on the top of wing wall, return wall etc. complete as per drawing and MoRTH specification Clauses 1313, 1411 and 2206.6.6 50 mm thick
L/R Charanwasi to Sitsar
Earthwork in excavation for structures as per drawing and MoRTH specifications Clause 304.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material.Ordinary soil Upto 3 m depth
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and MoRTH specifications Clause 1702, 1703, 2102 & 2104 P.C.C grade M 10 Nominal mix 1:3:6
Stone masonry work in cement mortar in foundation complete as per drawing and MoRTH specifications Clauses 1402, 1405, 2102 & 2104.Random Rubble Masonry In 1:6 cement mortar
Plastering with cement mortar (1:4), 20 mm thick on Stone work
Providing PCC M-20 architectural coping on the top of wing wall, return wall etc. complete as per drawing and MoRTH specification Clauses 1313, 1411 and 2206.6.6 50 mm thick
Bhojasar to Chatar Singh ki Dhani
Maintenance of 200 metre km stone by way of refiting of tilted stones repairing with cement mortar, cleaning, repairing and lettering on 200 metre km stone and 5th km stone as per drawing and MoRTH specification Clause 1900 and 2800
Printing letters and figures of any shade with synthtic enamel paint of any approved colour to give an even shade
Construction of granular sub-base by providing well graded material, spreading in uniform layers with Tractor Mount Grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per MoRTH Specification Clause 401. For Grading III Material
Supplying filling and stiching of empty cement bags either of plastic or jute with earth available at site of weight not less than 40 kg including ecavation etc. complete
Repair of Surface defects in existing cement concrete pavement surface by providing and laying treatment of wear & tear concrete surface with pre-mixed, ready to use, geopolymer based mortar & confirming to ASTM C 1600 upto 10 mm thickness with following property– Curing Free, compressive strength of 15 MPa within 2 hours, Quick Setting, bond strength of 4 MPa within 24 hours and repaired surface should be ready to use within 3 hours. Note : (This item is to be used in only emergency situation after decided by Engineer in charge )
Repair to pot holes and removal of loose material, trimming of sides, cleaning of surface by providing tack coat, 20 mm thick pre-mix carpet and seal coat type B as per MoRTH specification Clause 3004.2
Maintenance of WBM road including filling up of pot holes, ruts and rectifying corrugated surface, damaged edges and ravelling as per MoRTH specification Clause 404
Village Kanwari to Village Toliyasar
Maintenance of 200 metre km stone by way of refiting of tilted stones repairing with cement mortar, cleaning, repairing and lettering on 200 metre km stone and 5th km stone as per drawing and MoRTH specification Clause 1900 and 2800
Printing letters and figures of any shade with synthtic enamel paint of any approved colour to give an even shade
Painting two coats with superior grade synthetic enamel paint of approved quality to give an even shade including writing lettering and figures with synthetic enamel paint as per IRC specifications.Direction & Place Identification sign boards including painting of posts.
Construction of granular sub-base by providing well graded material, spreading in uniform layers with Tractor Mount Grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per MoRTH Specification Clause 401. For Grading III Material
Supplying filling and stiching of empty cement bags either of plastic or jute with earth available at site of weight not less than 40 kg including ecavation etc. complete
Repair to pot holes and removal of loose material, trimming of sides, cleaning of surface by providing tack coat, 20 mm thick pre-mix carpet and seal coat type B as per MoRTH specification Clause 3004.2
Maintenance of WBM road including filling up of pot holes, ruts and rectifying corrugated surface, damaged edges and ravelling as per MoRTH specification Clause 404
CC Road NH 11 to Loonch Via Kansujiyo ki Dhani
Repair of Surface defects in existing cement concrete pavement surface by providing and laying treatment of wear & tear concrete surface with pre-mixed, ready to use, geopolymer based mortar & confirming to ASTM C 1600 upto 10 mm thickness with following property– Curing Free, compressive strength of 15 MPa within 2 hours, Quick Setting, bond strength of 4 MPa within 24 hours and repaired surface should be ready to use within 3 hours. Note : (This item is to be used in only emergency situation after decided by Engineer in charge )
Construction of granular sub-base by providing well graded material, spreading in uniform layers with Tractor Mount Grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per MoRTH Specification Clause 401. For Grading III Material
Removal of blown sand including taking out and disposal of excavated material with lead up to 50mtr and lift up to 1.50 mtr disposed soil to be levelled and neatly dressed
Painting two coats with superior grade synthetic enamel paint of approved quality to give an even shade including writing lettering and figures with synthetic enamel paint as per IRC specifications.Direction & Place Identification sign boards including painting of posts.
Providing and laying rounded hump type speed breakers for crossing speed 25 km/h as per IRC design including providing and applying bitumen emulsion tack coat, making speed breaker in designed profile with bituminous macadam, providing seal coat type B for sealing the voids and marking chequered pattern with thermoplastic paint complete as per IRC : 99-1988
CC Road Dhakawali to Deepsar Via Seetsar
Repair of Surface defects in existing cement concrete pavement surface by providing and laying treatment of wear & tear concrete surface with pre-mixed, ready to use, geopolymer based mortar & confirming to ASTM C 1600 upto 10 mm thickness with following property– Curing Free, compressive strength of 15 MPa within 2 hours, Quick Setting, bond strength of 4 MPa within 24 hours and repaired surface should be ready to use within 3 hours. Note : (This item is to be used in only emergency situation after decided by Engineer in charge )
Construction of granular sub-base by providing well graded material, spreading in uniform layers with Tractor Mount Grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per MoRTH Specification Clause 401. For Grading III Material
Removal of blown sand including taking out and disposal of excavated material with lead up to 50mtr and lift up to 1.50 mtr disposed soil to be levelled and neatly dressed
Painting two coats with superior grade synthetic enamel paint of approved quality to give an even shade including writing lettering and figures with synthetic enamel paint as per IRC specifications.Direction & Place Identification sign boards including painting of posts.
Providing and laying rounded hump type speed breakers for crossing speed 25 km/h as per IRC design including providing and applying bitumen emulsion tack coat, making speed breaker in designed profile with bituminous macadam, providing seal coat type B for sealing the voids and marking chequered pattern with thermoplastic paint complete as per IRC : 99-1988
CC Road A/R to Sangasar
Repair of Surface defects in existing cement concrete pavement surface by providing and laying treatment of wear & tear concrete surface with pre-mixed, ready to use, geopolymer based mortar & confirming to ASTM C 1600 upto 10 mm thickness with following property– Curing Free, compressive strength of 15 MPa within 2 hours, Quick Setting, bond strength of 4 MPa within 24 hours and repaired surface should be ready to use within 3 hours. Note : (This item is to be used in only emergency situation after decided by Engineer in charge )
Construction of granular sub-base by providing well graded material, spreading in uniform layers with Tractor Mount Grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per MoRTH Specification Clause 401. For Grading III Material
Removal of blown sand including taking out and disposal of excavated material with lead up to 50mtr and lift up to 1.50 mtr disposed soil to be levelled and neatly dressed
Painting two coats with superior grade synthetic enamel paint of approved quality to give an even shade including writing lettering and figures with synthetic enamel paint as per IRC specifications.Direction & Place Identification sign boards including painting of posts.
Providing and laying rounded hump type speed breakers for crossing speed 25 km/h as per IRC design including providing and applying bitumen emulsion tack coat, making speed breaker in designed profile with bituminous macadam, providing seal coat type B for sealing the voids and marking chequered pattern with thermoplastic paint complete as per IRC : 99-1988
Bhukhredi Village Main Road
Repair of Surface defects in existing cement concrete pavement surface by providing and laying treatment of wear & tear concrete surface with pre-mixed, ready to use, geopolymer based mortar & confirming to ASTM C 1600 upto 10 mm thickness with following property– Curing Free, compressive strength of 15 MPa within 2 hours, Quick Setting, bond strength of 4 MPa within 24 hours and repaired surface should be ready to use within 3 hours. Note : (This item is to be used in only emergency situation after decided by Engineer in charge )
Construction of granular sub-base by providing well graded material, spreading in uniform layers with Tractor Mount Grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per MoRTH Specification Clause 401. For Grading III Material
Removal of blown sand including taking out and disposal of excavated material with lead up to 50mtr and lift up to 1.50 mtr disposed soil to be levelled and neatly dressed
Painting two coats with superior grade synthetic enamel paint of approved quality to give an even shade including writing lettering and figures with synthetic enamel paint as per IRC specifications.Direction & Place Identification sign boards including painting of posts.
Providing and laying rounded hump type speed breakers for crossing speed 25 km/h as per IRC design including providing and applying bitumen emulsion tack coat, making speed breaker in designed profile with bituminous macadam, providing seal coat type B for sealing the voids and marking chequered pattern with thermoplastic paint complete as per IRC : 99-1988
Gram Panchya Kusumdesar PHC to Karnaram Bhinchar
Repair of Surface defects in existing cement concrete pavement surface by providing and laying treatment of wear & tear concrete surface with pre-mixed, ready to use, geopolymer based mortar & confirming to ASTM C 1600 upto 10 mm thickness with following property– Curing Free, compressive strength of 15 MPa within 2 hours, Quick Setting, bond strength of 4 MPa within 24 hours and repaired surface should be ready to use within 3 hours. Note : (This item is to be used in only emergency situation after decided by Engineer in charge )
Construction of granular sub-base by providing well graded material, spreading in uniform layers with Tractor Mount Grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per MoRTH Specification Clause 401. For Grading III Material
Removal of blown sand including taking out and disposal of excavated material with lead up to 50mtr and lift up to 1.50 mtr disposed soil to be levelled and neatly dressed
Painting two coats with superior grade synthetic enamel paint of approved quality to give an even shade including writing lettering and figures with synthetic enamel paint as per IRC specifications.Direction & Place Identification sign boards including painting of posts.
Providing and laying rounded hump type speed breakers for crossing speed 25 km/h as per IRC design including providing and applying bitumen emulsion tack coat, making speed breaker in designed profile with bituminous macadam, providing seal coat type B for sealing the voids and marking chequered pattern with thermoplastic paint complete as per IRC : 99-1988
Gram Panchyat Kanwari Amra Ram Garwal house to Purna Ram Parjapat Via Muslim & Bhargav Mohalla
Repair of Surface defects in existing cement concrete pavement surface by providing and laying treatment of wear & tear concrete surface with pre-mixed, ready to use, geopolymer based mortar & confirming to ASTM C 1600 upto 10 mm thickness with following property– Curing Free, compressive strength of 15 MPa within 2 hours, Quick Setting, bond strength of 4 MPa within 24 hours and repaired surface should be ready to use within 3 hours. Note : (This item is to be used in only emergency situation after decided by Engineer in charge )
Construction of granular sub-base by providing well graded material, spreading in uniform layers with Tractor Mount Grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per MoRTH Specification Clause 401. For Grading III Material
Removal of blown sand including taking out and disposal of excavated material with lead up to 50mtr and lift up to 1.50 mtr disposed soil to be levelled and neatly dressed
Painting two coats with superior grade synthetic enamel paint of approved quality to give an even shade including writing lettering and figures with synthetic enamel paint as per IRC specifications.Direction & Place Identification sign boards including painting of posts.
Providing and laying rounded hump type speed breakers for crossing speed 25 km/h as per IRC design including providing and applying bitumen emulsion tack coat, making speed breaker in designed profile with bituminous macadam, providing seal coat type B for sealing the voids and marking chequered pattern with thermoplastic paint complete as per IRC : 99-1988
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 3.20 MB
BOQ_967332.xls
BOQ • 0.36 MB
Download all tender documents and submit your bid