CERTAIN REPAIRS TO ROOF LEAKAGE/SEEPAGE SUNKEN TREATMENT FLOOR WALL TILING INCLUDING KITCHEN/BATHROOM/TOILET IN MD/OTM OF AGE B/R-I AREA UNDER GE (EAST) LUCKNOW

Amount

Taking down cement or cement lime plaster any description from brick or stone walls/ceiling etc including raking out joints, hacking for key & scrubbing down with water complete all as specified and directed.

Dismantling of cast iron pipe or reinforced concrete drain pipes any size, any position jointed in CM complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry (in portion) built in cement mortar including all quoins ,arches, piller etc complete all as specified and directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area exc 1.5 sqm but not exc 4 sqm each complete all as specified and directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area not exc 1.5 sqm each complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing the tiles from site and rubbish off the premises complete all as specified and directed.

Taking up or down steel water tubing and connections of 15mm bore, fixed in walls, ceiling, floors, trenches etc. complete all as specified and directed.

Taking up or down steel water tubing and connections of 20mm bore, fixed in walls, ceiling, floors, trenches etc. complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and paving exc 15cm thickness but above ground floors complete all as specified and directed.

M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

M&L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) rain water pipes double socketed in any length with rubber rings joints fixed to walls/trenches complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends, any radius complete all as specified and directed.

M&L for brick work with old size sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in CM 1:6 complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on brick work or concrete surface of wall and finished surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on brick work or concrete surface of wall and finished surface even and smooth without using extra cement with WPC @3% complete all as specified and directed. (Note: WPC shall be measured and paid "Seperately").

Supply only water proofing compound ISI marked complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:3 fair surface of ceiling finished surface even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying three coats of white wash on wall complete all as specified and directed.

M&L for prepration of new surface of wall and applying two coats of cement based paint white or tinted complete all as specified and directed.

M&L for prepration new plastered surfaces and applying two coat of white wash on ceiling complete all as specified and directed.

M&L for prepration old plastered surfaces and applying two coat of white wash on wall surfaces complete all as specified and directed.

S&F for framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc. complete driilled for fixing steel sheeting or other coverings, doors etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (excusive of steel sheeting and other coverings, running rails and guides) and hanging, also fastening and fixing complete Quality A Fe-410 W (Gde-E-250) complete all as specified and directed.

M&L for MS flat for hold fast conforming to Fe-310-0 or Fe-410-0 complete all as specified and directed.

S&F solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS Square tube etc complete all as specified and directed.

S&F for factory made solid panel PVC door moulded shutter 30mm thick (style) consisting frame made out of MS tube for top and bottom rail MS frame shall be covered with heat mould plaint colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for style and plain colour PVC sheet for top rail lock and bottom rail on either side and as gap insert for top rail and bottom rail plain colour PVC sheet tape fixed in MS frame welding sealed to the style and rail with suitable PVC sheet bearing and jointing together with solvent cement etc complete all as specified and directed.

S&F 35 mm thick flush shutter solid core construction with block board core and plywood face panels commercial type on both sides with 1.5mm thick wooden finish veneering and polishing complete all as specified and directed.

S&F steel window/ ventilator with top hung shutter including hinges steel peg stay, complete all as specified and directed.

S&F steel window or ventilator fixed type with glazing bars complete all specified and directed.

S&F sheet glass 4mm thick glass in grounded or abscured or frosted, on one side complete all as specified and directed.

S&F in repair 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads square area not exc 0.5 sqm in each pane complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and directed.

S&F 250 mm long aluminium alloy sliding door bolt with hasp & staple (bolt type ) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolts all as specified

S&F 200 mm long aluminium alloy sliding door bolt with hasp & staple (bolt type ) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolts complete all as specified and directed.

S&F for aluminium anodized barrel tower bolts 200 mm of extruded section complete all as specified and directed.

S&F for aluminium anodized barrel tower bolts 150 mm of extruded section complete all as specified and directed. .

S&F 125 mm size aluminium alloy handles fabricated type extruded section , ISI marked complete all as specified and directed.

S&F 100 mm size aluminium alloy handles fabricated type extruded section , ISI marked complete all as specified and directed.

S&F butt hinges 125 mm stainless steel hinges medium weight complete all as specified and directed.

S&F butt hinges 100 mm extruded aluminium alloy with galvanised mild steel hinges pin anodised type B-21 and fixed to PVC frame complete all as specified and directed.

M&L for preparation of old wood based materials of any description over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new steel surface of any description not otherwise described over 10 cm width or girth and apply two coat synthetic enamel paint over and including one coat of primer complete all as specified and directed.

Cutting holes in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required exc half brick but not exc one brick complete all as specified and directed.

Cutting chases pinning in making good to facing where required and pointing in CM 1:3 to ends or edges of landings steps cills sunshades, shlves, lintels etc and cutting chases for concealed water tubing and making good to disturbed surfaces cutting not exc 10 CM in girth complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base floor complete all as specified and directed.

M&L for 25 mm thick cement concrete Type B-1, 1:2:4 ( 20 mm graded stone aggregate) over sub base complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7-8 mm thick coloured (Square/rectangular) area of each tiles exc 0.11 sqm but not exc 0.18 sqm in floor including screed bed 15 mm thick or beding layer for laying floor finishes in CM 1:4 etc set and jointed in neat cement slurry and pointing in white or coloured cement to match complete all as specified and directed.

M&L for coloured glazed ceramic tiles 450 x 300 x 7 mm thick but as on vertical surfaces such as skirting / dado including 10 mm thick rendering in CM 1:4 complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts flushing cistern and flush pipe) and trap including connection to drain (or out going pipe) and to flushing pipe anti sphonage pipe etc complete including flush pipes and all joints complete all as specified and directed.

S&F plastic water closet seat cover coloured/white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair vitreous china squatting pan Orissa pattern size 580x440 mm white with P or S trap front or back inlet with integral foot rests (excluding flushing cistern and flush pipe ) complete including provision of lime concrete bedding complete all as specified and directed.

S&F 10 Litres capacity PVC valveless syphonic action type flushing cistern low level, white with inlet ball valve float and handle including brackets connection to pipes and fixing of lever if any joint between flushing pipe and socket of WC pan complete all as specified and directed.

S&F in repair vitreous china wash hand basin white angle back size 550x400 mm including 32 mm dia CP waste coupling long screwed shank fly nut flanged end and embedded in lead to waste pipe excluding piller taps complete all as specified and directed.

S&F in repair bottle trap 32mm dia of PTMT having mimimum water seal of 25mm, (Minimum weight 260 gms complete all as specified and directed.

S&F in repair vitreous china urinal, half stall type white (excluding flushing cistern flush pipe and waste pipe) complete including providing and fixing plug, bedding urinal against wall in CM 1:2 securing urinal to plugs with and including 60cm long brass screws pointing around urinal back in cement fixiing automatic flushing cistern with brackets, flush pipe grating and union for discharge pipe including connections to flushing pipe and outgoing pipes complete all as specified and directed.

S&F 110mm PVC (SWR) junction single (single T) equal or unequal complete all as specified and directed.

S&F 100mm dia sand cast iron soil waste and vent pipes in any length with or without ears with cement fixed to walls or in floors complete all as specified and directed.

S&F in repair 75mm dia sand cast iron soil waste and vent pipes in any length with or without ears with cement fixed to walls or in floors complete all as specified and directed.

S&F CI 100 mm dia branch pieces single ( equal or unequal) ordinary or inverted (spigot or socket type) or with perallel branches complete all as specified and directed.

S&F bore of pipe in 100 mm CI bends (any radius) with ducks foot or heel rest complete all as specified and directed.

S&F 100 cast iron sanitary connection socket to fit WC out let complete all as specified and directed.

S&F 100mm dia of bore pipe stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stay including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S&F 100 mm Cast iron traps P or S trap, with grating including jointing to waste pipe fixed in cement concrete type 1:2:4, B-1, complete all as specified and directed.

S&F 75mm CI floor trap, with grating including jointing to waste pipe fixed in cement concrete type 1:2:4, B-1 complete all as specified and directed.

S&F 110 mm CI vent cowl complete all as specified and directed.

S&F in repair 15mm dia fancy type chromium plated bib taps cast copper alloy with crutch or butterfly handle, scresed down screwed for iron pipe or for brass ferrule and fixed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair 15 mm dia Pillar tap cast copper alloy chromium plated fancy type with capstan head and cup screwed down screwed for G I pipe or for brass ferrule complete all as specified and directed.

S&F in repair CP concealed stop cock for 15 mm bore pipe complete all as specified and directed.

S&F 15mm dia fancy type chromium plated angle valve/cast copper alloy screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed to GI pipe complete all as specified and directed.

S&F glass shelf assembly consisting of 5.50mm thick glass sheet glass shelf 12cm wide with bracket guard and railing, 60cm long complete all as specified and directed.

S&F in repair corner glass shelf assembly consisting of 5.5mm thick sheet glass 250x250mm size fixed with chromium brackets complete all as specified and directed.

S&F in repair health feucet to EWC CP brass with minimum 1500mm long CP flexible pipe connection etc, complete all as specified and directed.

S&F in repair 125 mm dia CP brass shower rose with or without swivel joints any size including fixing to steel pipe or union complete all as specified and directed.

S&F in repair CP soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F CP brass towel rails 20 mm dia and 600 mm long fixed as in repair incl chromium plated brass screw and wooden / cleats complete all as specified and directed.

S&F brass hat pegs solid body 125 mm to 175 mm brass fancy type complete all as specified and directed.

S&F in repair PVC connection (PTMT) 15 mm bore 600 mm long with brass coupling on both ends of superior quality complete all as specified and directed.

S&F 32mm dia PVC waste pipe approx 900mm long for WHB and urinal complete all as specified and directed.

Dismantling water tank of capacity exc 250m but not exc 500 Ltr complete all as specified and directed.

Dismantling water tank of capacity exc 500 Ltr but not exc 1000 Ltr complete all as specified and directed.

S&F 500 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I complete all as specified and directed.

S&F 1000 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in benching and tank stanging complete all as specified and directed.

M&L for cement concrete type E-2, 1:5:10 (40mm brick aggregate) in sunken floor portion in WC/Bath complete all as specified and directed.

M&L for cement concrete type C-2, 1:3:6 (40 mm graded agg) as in foundation mass concrete complete all as specified and directed.

M&L for water proofing treatment to RCC sunken slab as under :- (a) M&L for 10mm thick plaster in CM 1:4 over existing roof finished even and smooth without using extra cement with WPC @ 3% of weight of cement all as specifed and directed. (b) Priming surfaces and applying bituminous [email protected] ltr/sqm over cleaned and dry roof surface including vertical surface. (c) One coat of hot blown bitumen @ 1.2 Kg/Sqm of sunken floor and vertical surfaces. (d) Laying one layer of APP based polymeric membrane 3 mm thick weight not less than 3 kg/sqm reinforced with non woven polyster fibre weight not less than 150 gm/sqm and sealed by torch application with aluminium overlap of 150 mm and 100 mm at end and side of polymeric membrane respectvely.

S&F 32mm bore tubes light grade galvanised with fiting and fixed complete to wall inside of sunken floor complete all as specified and directed.

M&L for precast RCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in cover slab of manholes, drain etc set in CM (1:4) complete all as specified and directed.

M&L for TMT bars 10 mm dia and over cut to length to shape required including hooking ends and binding with mild steel wire (anuelled) wire not less than 0.9 mm dia complete all as specified and directed.

S&F exterior tiles of superior qulaity 25mm thick of approved size/design/shade set & jointed in neat cement slurry & pointed in white or coloured cement to match as in floor over and including 20mm thick screed bed in CM 1:4 , complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in coping including necessary form work complete all as specified and directed.

M&L for PCC (1:4:8) type D2 using 40 mm graded crushed stone aggregate as in foundation, filling and mass concrete in surface channel, sub base of hardstanding complete all as specified and directed.

S&F in repair 60 thick M-35 grade ISI Marked, Machine pressed concrete rubber moulded interlocking any coloured paver block of any shape and size with grey cement and pigment over and including 25 mm thick sand cushion complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-2 , 75 mm thick as in plinth protection and finishing the surface even and smooth without using extra cement complete all as specified and directed.

Dismantling of brick tiles or terracing tiles on roof complete all as specified and directed.

Demolition of lime/cement concret in any despription along with tar felt treatment and CM bedding, any description complete all as specified and directed.

M&L for cement concrete type B-1, 1:2:4 (20mm graded aggregate) on roof slab complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of concrete surfaces in CM 1:4, mixed with liquid water proofing compound finished even and smooth without using extra cement complete all as specified and directed. (Note:- Liquid water proofing compound shall be used measured and paid "separately").

Supply only Liquid water proofing compound complete all as specified and directed.

M&L for water proofing treatment to roof and edges (Vertical or tapered ) etc. in following sequence (i) Properly cleaning and drying the surface. (ii) Applying a coat of bitumen primer @ 0.5 ltr /sqm. (iii) laying APP based polymetric membrane minimum weight 3 kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric(wt not less than 150 gms/sqm) with 100 mm and 150mm over lap on side and end respectively laid on primed surface by sealed and bonded to the surfaces by torchen method complete all as specified and directed.

M&L for applying two coats of bitumen based aluminium paint on water proofing treatment complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of concrete surfaces in CM 1:3, mixed with liquid water proofing compound finished even and smooth without using extra cement complete all as specified and directed. (Note:- Liquid water proofing compound to be measured and paid "separately").

M&L for providing and applying fibre reinforced elastomaric liquid water proofing membrane with resilient acrylic polymershaving sun reflective index(SRI) of 105 manufactered by asian paints ltd or equivalent as approved by GE on top of concrete roof in three coats @ 10.76 ltrs / 10 sqm .One coat of self priming of elastomaric water proofing liquid (Dilution with water in the ratio 3 :1 )and two coat of undiludted elestomeric waterproofing liquid (dry film thickness of complete allocation /system not less than 500 micron ). The operation shall be carried out after scrapping and properly cleaning loose partical with wire brushes complete all as specified and directed. (Note:- Treatment shall be done through authorised representative of manufactures).

M&L for preparation of old plastered surface and applying two coat oil emulsion distemper on prepared plastered surface complete all as specified and directed.

M&L for two coat cement base paint on old prepared plastered surface including preparation of surfaces complete all as specified and directed.

M&L for light shade vitrified tiles 10mm thick (square/rectangular) polished,area of each tile not exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

Dismantling boarding any description fixed in any position with nails complete all as specified and directed.

S&F PVC cupboard shelf/ partition/ frame/ shutter of 18mm thick side of panel externally impact perfact finish to the shutter and jointed together with solvent cement adhesive 8mm thick (4mmx 2) x 12mm wide PVC sheet is used as gap insert for top & bottom rail, 18mmx 1mm PVC edge lipping is done on top, bottom and sides using PVC solvent cement adhesive etc as per manufacture's specification and drawing complete all as specified and directed. (Note:-Measurement shall be done of size of boarding in square)

S&F 150mm long fancy brass handle for cupboard & wardrobe shutter complete all as specified and directed.

S&F 200mm long fancy brass handle for wardrobe shutter complete all as specified and directed.

S&F fancy stainless steel folding handle of size 3 inch x 1/2 inch for wardrobe shutter complete all as specified and directed.

S&F hydraulic slider of size 8"x1"x1/2" with steel ball, Aluminium body and striking plate including letting complete all as specified and directed.

S&F 100mm brass mortice lock (Godrej pattern), vertical type, 4-lever complete all as specified and directed.

S&F auto hinges of 3"X2"X1" size SS body complete all as specified and directed.

S&F continous piano hinges of brass with width 30mm of flap complete all as specified and directed.

S&F in repair stainless steel wardrope trolly of any shape and size with side sliding roller clip over stainless steel channel on both side fixed with steel size 33x20x8 inches with sliding rails complete all as specified and directed.

S&F in repair stainless steel modular type basket of size 20x16x8 inches with side sliding roller clip over stainless steel channel on both side complete all as specified and directed.

S&F in repair stainless steel modular type basket of size 20x16x6 inches with side sliding roller clip over stainless steel channel on both side complete all as specified and directed.

S&F in repair stainless steel modular type basket of size 20x16x4 inches with side sliding roller clip over stainless steel channel on both side complete all as specified and directed.

S&F in repair stainless steel half circle modular type basket of size 28x20x4 inches over stainless steel pipe revolving type with sliding rails complete all as specified and directed.

S&F in repair stainless steel modular type basket of size 20x20x4 inches (pull out 3 shelf) with side sliding roller clip over stainless steel channel on both side complete all as specified and directed.

S&F in repair stainless steel modular type basket of size 20x20x12 inches (pull out 3 shelf) with side sliding roller clip over stainless steel channel on both side complete all as specified and directed.

S&F in repair 15mm bore CP sink mixer with swinging casted spout with aerator for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.

S&F in repair 15mm bore CP long body bib cock with wall flange with aerator screwed down for iron pipe complete all as specified and directed.

M&L for preparation of old wooden surface of any description not otherwise described over 10 cm width or girth and apply two coat synthetic enamel paint complete all as specified and directed.

QUALITY CONSTRUCTIONS CO

R P construction company

M/S SWATI CONSTRUCTION

M/S KAUSHIK CONSTRUCTION