Construction of Administrative Building at EPIP Amingaon Kamrup(R) Assam

Amount

EARTHWORK

Excavation: Earth work in excavation for foundation trenches of walls, retaining walls, footings of columns, steps and septic tank etc including refilling ( return filling ) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc.and removal of surplus earth with all lead and lifts as directed and specified in the following classifications of soils including bailing out water where necessary as directed and specified. (b) In hard/ dense soil

PLINTH FILLING: Earth/sand filling in plinth in layers not more than 150 mm thick including necessary carriage, watering,ramming etc. complete as directed and specified including payment of land compensation forest royalty, sales taxe and other duties and taxes as may be necessary. (c) With river sand or silt (predominantly non plastic)by truck carriage including loading and unloading.

CEMENT CONCRETE WORKS

PLAIN CEMENT CONCRETE WORKS

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, wall, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where neccessary shall be measured and paid separately). (a) In prop 1 cement : 3 sand : 6 coarse aggregate by volume

Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg.of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed.

REINFORCED CEMENT CONCRETE WORKS Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement f

Providing and laying plain/reinforced cement concrete works including dewatering if necessary,and curing complete but excluding cost of from work and reinforcment for reinforced cement concrete work (form work and reinforcement will be measured and paid separately)

Using mixture machine (A)In sub-structure up to plinth level

Foundation, Footing,columns with base,tie and plinth beam, grade beam, pilecap, base slab, retaining walls,walls,walls of septic tank, inspection pit and the like and other works not less than 100 mm thick up to plinth level.

P) Using admixture, plasticiser etc for air entraining, water reducing purposes including addition of agent for changing normal setting time of concrete as required.

b) M 20 grade concrete or Prorp.1:1.5:3

(B)In super structure from plinth level upto 1st floor level.

(ii)Columns, pillar, posts, struts, suspended floor, roof, landing, shelf, and support, balcony, lintel, sill band beam, girder, bressumer, cantilever, staircase(exceptspiral staircase and landing) including preparing the top surface and finishing of nosing. P) Using admixture, plasticiser etc

b) M20 Grade concrete or prop 1:1.5:3 Total( Gr.floor + 1st floor)

Extra for each subsequent floor or part thereof above 1st floor level

SHUTTERING/FORMWORKS PLYBOARD SHUTTERING Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in: Columns, Pillars, Posts & Strut of square/ rectangular/ polygonal in plan or any shape like Tee/L etc. having plane vertical face. Total( Gr.floor + 1st floor)

Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 5

Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. (a) For depth not exceeding 1.0M.

Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 5

Flat Surfaces such as soffits of suspended floors, roofs, landings and the like.Total( Gr.floor + 1st floor)

Staircase with sloping or stepped soffits including risers and stringers but excluding Landing.Total( Gr.floor + 1st floor)

BRICK WORKS Providing brick soiling in foundation and under floor with stone/best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering complete. (a).Brick on flat soling.

(c).Stone soling of thickness 150mm.

Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary (b) In proportion 1:4.

230mm thick brick wall in cement morter with 1st class brick including racking out joints and curing complete as directed in structure . (I) In Sub-structure upto plinth level including dewatering if necessary.

1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (providing M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) (A) 112mm thick brick wall (1 cement:4 sand)

(B) 75 mm thick wall (b) In cement mortar in proportion 1:4. (1 cement: 4 sand)

Extra for brick walling for each subsequent floor or part thereof above the 1st floor level.

FLOOR FINISHED Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) a) Normal range . ii) Of size 600mmx600mm and above

Cement plaster skirting with cement mortar in prop. 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor. (a) 15 mm thick

STAIRCASE Kota stone slab of 18 mm thick in riser of steps, skirting, dado and pillars laid with 10mm thick cement plaster 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete. (2) 600mm x 900mm and above

ANTISKID TILES Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed. VITRIFIED iii)Executive range-2 (Sizes 600 mm x600mm and above) c). Tuscan Series- Gres Lepato

B) ON WALLS Providing polished vitrified wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/white cement slurry mixed with approved pigment to match shade of tilesc complete at all levels as specified and directed. (coloured pigment should be in conformity with colour of tiles and as approved and directed by the department). iii) Of size300mmx600mm and above

PLASTERING 10 mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed. b) In cement mortar 1:4

A) On rough side b) In cement mortar 1:4

B) On fair side b) In cement mortar 1:4

Extra over item no 10 for plastering on celling and soffits of stairs up to 1st floor level (instead of plastering on walls) including curing complete as directed.

Extra over item no 10 for exterior plastering over wall for every addl floor or part thereof beyond 1st floor level including curing complete as directed.b) On two coat plaster

Water Proofing Plastering 15mm thick plastering of the interior surface of concrete water tanks with cement mortar in prop 1:4 admixed with modified Styrene Butadiene Rubber based polymer like Sika Latex of Sika India Ltd./Dr. Sealkit Masterbond Latex (Asian Chemicals)/Rheomix 141 of BASF @ 200gms per bag of cement as specified and directed by the department complete.

CEMENT PRIMER a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.

WALL PUTTY Providing two coats of acrylic water based wall putty/ wall filler of Asian Paints/ Berger/ Dulux over concrete/ cement plaster/ brick walls and ceilings both internal and external after removing all the loosely adhering material from the wall/ ceiling surface with the help of emery stone, putty blade or wire brush, moistening the wall with the help of sufficient quantity of clear water as specified and directed by the department.

INTERIOR PAINTING Wall painting (two coats) with acrylic emulsion paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. (a).Acrylic Emulsion Paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)

EXTEROR PAINTING Finishing old/ new wall with water proofing weather coat smooth anti-fungal exterior painting of Apex brand of Asian Paints and of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats)

PAINTING ON STEEL AND OTHER METAL SURFACE Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper.

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. (i).Surfaces over 100mm in width or girth. b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

PAINTING ON WOOD AND WOOD BASED SURFACES Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting.

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping. (i).Surfaces over 100mm in width or girth. b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

GYPBOARD CEILING Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) M/F Suspended Ceiling which includes G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of width 25mmx10mmx0.55mm thick fixed to soffit with G.I.cleat and steel expansion fasteners. Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm c/c, 9.5mm/ 12.5mm tapered edge Gypboard (conforming to IS:2095-1982) is then screw fixed to ceiling section with 25mm long drywall screws at 230mm c/c. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally, the boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and directed. (For light fittings, providing opening for doors, window, ventilators etc, cut out made with frame of perimeter channel supported suitably to be measured and paid separately where necessary). 12.5mm thick

ACOUSTICAL APPLICATION Providing and fixing Mineral Fiber Acoustic Ceiling Tiles in 600mm x 600mm of 13mm/15mm thickness to be placed in E- Grid Suspended Ceiling Grid 2430 System consisting of Main Runner 3600 mm long, Cross Tee 1200mm/600mm long and Wall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300 mm c/c. Main Runner shall be placed along the shorter dimension of the area to be covered. The distance between the two Main Runners to be maintained at 1200mm. The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at a regular interval of 600 mm to form a modular grid of 1200mm x 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600mm x 600mm.E-Grid of module size 600mm x 600mm shall be supported by 4/6 mm dia G.I. wire from purlins/soffit Mineral Fiber Acoustic Ceiling Tiles of Everest Industries Limited should be placed in the E-Grid module to form a False Ceiling including the cuttings complete as directed.ting. A) Everest Designer Ceilings or equivalent as directed by the department (Primered) B) Using 15mm thick ceiling tiles

REINFORCEMENT Supplying,fitting and fixing in position reinforcement bars conforming to relevant I.S Code for R.C.C work/R.B walling including straightening cleaning cutting and bending to proper shapes and length as per details supplying and binding with 20G annealed black wire and placing in position with proper blocks supports chairs spacers etc.complete.(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they included in the rate.)(upto 1st fl level). a) From Primary Producer: TATA/SAIL/Jindal steel/Shyam steel/RINL (i) TMT Corrosion resistant steel (CRS) reiforcement bar

Extra over item 10 for each subsequent floor or part thereof above first floor level.

GRILL WORKS Providing,fitting and fixing M.S grill of required pattern for windows/clerestory windows/opening with M.S flats at required spacing in frame all round,square or round M.S bars with round headed bolts and nuts or screws. I. Plain grill (c) Fixed to Brickwork/P.C.C/R.C.C

DOOR & WINDOW Providing, fitting and fixing factory made wooden panelled doors with panel inserts of 75mm to 50mm width and 12mm to 20mm thickness,joined together with continous tongue and groove joints glued together with Movicol or other approved adhesive leaving a vertical groove of 7.5mm to 15mm between the inserts,the edges of panel inserts being feather tongue into styles and rails including providing three pairs of oxidised M.S butt hinges (100mm x75 mm x3.55mm) and furnishing with moulded timber beading of size 25mmx15mm around the panels complete as per drawing (moulded timber bead and all fittings except hinges to be paid separately) a) With Teak wood / Sissu wood. ii) 35 mm thick with panel inserts of 20mm thickness.

Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws. c) One face decorative and other face nondecorative type and block board core.(ii) 35 mm thick .

DOOR AND WINDOW FITTINGS

ALUMINIUM FITTINGS Supplying,fitting,fixing anodised aluminium fittings of approved make,reasonably smooth,free from sharp edges and corners,flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc.complete.(anodised to bright natural matt &satin finished) (a)Sliding door bolts (ii)250mm x16mm

(b)Tower bolts (iii)200mm x12mm

(c) Door handle (iii)150mm

t) Door stopper with rubber stopper

RAILING

Supplying and installing uPVC- Sliding Windows made out of Lead free, UV resistant green profile having "GREENLINE" mark of BIS standard uPVC multichambered sections of wall thickness 2.4mm with corners fusion welded, fully reinforced with Galvanized steel 1.5/2mm including interlock profile, glazing bead, grooving bead, brush seal, aluminum sliding track, stainless steel rollers, sealing wedge block, Espag, int handle, pop up handle, keeper, drain cap, fisher screws, packing pieces with all necessary stainlessness screws etc. complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets, bridging wedges and glass packers and with suitable water draining system. Application of silicon sealant from inside / outside of Dowcorning / GE or equivalent. With 5mm clear glass

uPVC-Sliding Windows

Supplying and installing uPVC- Sliding Windows made out of Lead free, UV resistant green profile having "GREENLINE" mark of BIS standard uPVC multichambered sections of wall thickness 2.4mm with corners fusion welded, fully reinforced with Galvanized steel 1.5/2mm including interlock profile, glazing bead, grooving bead, brush seal, aluminum sliding track, stainless steel rollers, sealing wedge block, Espag, int handle, pop up handle, keeper, drain cap, fisher screws, packing pieces with all necessary stainlessness screws etc. complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets, bridging wedges and glass packers and with suitable water draining system. Application of silicon sealant from inside / outside of Dowcorning / GE or equivalent.With 5mm clear glass (a) 2 Track Sliding Window with Flyscreen using uPVC section of sizes 88mm x 50 mm x 2.4mm thick wall for frame with inbuilt flyscreen track, 37mm x 61mm x 2.4mm thick wall for glass sash, 25mm x 49mm x 2.4mm thick wall for flyscreen sash and, Interlock: 43mm x 23mm (Glass Panel) (WINSTA KOMMERLING/ FENESTA/ ENCRAFT) (a) 2-Panel (i) 2-Panel with 5mm clear float glass

(b) 4-Panel (ii) 4-Panel with 5mm clear float glass

CASEMENT WINDOW Supplying and installing uPVC- Casement Windows made out of Lead free, UV resistant green profile having "GREENLINE" mark of BIS standard uPVC multichambered sections with corners fusion welded, fully reinforced with Galvanized steel 1.5/2mm including glazing bead, folding gasket, glazing gasket, friction stay, Espag handle, Espag, keeper, drain cap, run up block, fisher screws, packing pieces with all stainless steel screws complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets,bridging wedges and glass packers and with suitable water draining system. Fittings ROTO / GQ or Equivalent. Application of Silicon sealant from Inside / Outside of Dowcorning / GE or equivalent complete as directed. (FENESTA/ENCRAFT/WINSTA KOMMERLING) (d) Single leaf Top hung Window using uPVC section of minimum sizes 58mm x 57mm x 2.4mm thick wall for frame, 58mm x 68mm x 2.4mm thick wall for glass sash With 5mm clear float glass (WINSTA KOMMERLING/ FENESTA/ ENCRAFT)

Supplying and installing uPVC- Fixed Windows made out of Lead free,UV resistant green profile having "GREENLINE" mark of BIS standard uPVC multichambered sections of wall thickness 2.4mm with corners fusion welded, fully reinforced with galvanized steel 1.5/2mm including glazing bead , grooving bead, drain cap, fisher screws, packing pieces, necessary stainless steel screws etc. complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets, bridging wedges and glass packers and with suitable water draining system. Application of Silicon sealant from inside / outside of dowcorning / GE or equivalent complete as directed. With 5mm clear glass (a) Fixed window using uPVC sections of minimum sizes 58mm x 52mm x 2.4mm thick wall for frame and 58mm x 68mm x 2.4mm thick wall for glass sash. (WINSTA KOMMERLING/ FENESTA/ ENCRAFT)

ANTI-TERMITE TREATMENT PRE-CONSTRUCTION ANTI-TERMITE TREATMENT Pre- construction anti-termite treatment at the bottom of foundation pits and walls on either side up to a height of 300 mm from bottom of the excavation made for column plinth beam, wall, trenches etc. by applying the emulsion @ 5(five) litres per square meter of the surface area before starting construction work(supplying of neccessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution(tricel or equivalent) and water, i.e. 1% solution.

Pre construction anti - termite treatment by applying in the entire levelled area after plinth filling and before laying floor by applying the emulsion @ 5 (five) litres per square meter of the surface to be spread with light rodding so as to ensure proper absorption by the filled up earth (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.

Pre construction anti - termite treatment by applying the soil along the external perimeter of the building (after construction completed) to a distance close to the plinth wall as specified and as directed by the deptt. up to a depth of 300mm making rod holes along the line @ 150mm apart to a depth of 300mm and applying emulsion @ 4.5 litres per running meter ensure moistening of the soil with emulsion (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.

PLINTH PROTECTION Providing plinth protection with bricks flat laid in cement mortar 1: 4 and finished with 15mm thick cement plaster in prop. 1:2 with a floating coat of neat cement finish.

PILES TESTS ROUTINE TESTS Routine test for test loading to 1.5 times the specified safe working load including construction of any test pile cap and dismantling the same after completion of test. (Rate for Safe working Load)

Initial test for test loading to 2 times the specified safe working load including construction of any test pile cap and dismantling the same after completion of test. (Rate for Safe working Load)

Empty boring for specified diameter piles from ground level to cut-off level. d) Pile Dia 400 mm

Extra for boring specified diameter pile in high sub-soil water level requiring use of drilling mud and extra cement. (iii) 400 mm dia

R.C.C. PILING WORK. MACHINE DRIVEN PILES Providing cast in-situ machine driven reinforced cement concrete piles of required bore-diameter, bulb diameter, lengths and with reinforcement as per specifications and drawings including using of Bentonite solution. (Reinforcement to be measured and paid seperately as per item no. 21 C) UNIFORM PILE(I) M20 Grade Concreteiii) Pile dia 400 mm

REINFORCEMENT Supplying,fitting and fixing in position reinforcement bars conforming to relevent IS code, for reinforced cement concrete works in piles including straightening, cleaning ,cutting and bending to proper shapes and length as per specifications and drawings . The rings should be welded with vertical reinforcements as per specified IS codes of practice.(Inclusive of lap length, hook,chair, bend, anchor...etc) (A) TMT bar made of Primary producer (From Primary producer)

DISMANTLING/ DEMOLISHING WORK. Demolishing RCC/PCC pile head of different diameters carefully without disturbing the remaining portion of the pile including opening out of the pile head to be demolishing by excavating the earth upto required depth and clearing the debris as directed.

MISCELLANEOUS Extra for using admixture & plasticiser (a) RCC grade M20 iv) Pile Dia 400 mm

EUROPEAN TYPE WATER CLOSET Providing fitting and fixing Vitreous china Dual Flush / Floor Mounted Coupled / Extended water closet (European type W.C pan 400mm high) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately) (d) Single leaf Top hung Window using uPVC section of minimum sizes 58mm x 57mm x 2.4mm thick wall for frame, 58mm x 68mm x 2.4mm thick wall for glass sash B)Hindware make 2) One Piece water closet (ii) CEDAR (Cat. No.92072) (S trap) (inclusive of seat cover and fittings)

WASH BASIN Providing vitreous china wash basin with CI/MS brackets ,C.P Brass chain with plug,PVC waste pipe including painting of fitting and brackets, cutting and making good the walls and slabs wherever required.( Pillar cock,stop cock, waste coupling are to be paid separately) Table Top Basin (C) Jaquar Make (i) Opal (Cat. No.OPS-WHT-0556)

MIRROR Providing fitting and fixing Decorative Mirror complete as directed and specified. Table Top Basin (A) Parryware Make (a) Size 800mm x 600mm

SOAP TRAY,SOAP DISH,LIQUID SOAP DISPENSER AND LIQUID SOAP CONTAINER Providing, fitting and fixing CP soap tray / soap dish complete as directed and specified. Table Top Basin (iii) Cera Make (Cat.No.CA-103)

TOWEL RAIL,TOWEL RACK & TOWEL RING Providing fitting and fixing chrome plated (CP) towel rail of Jaquar make complete as directed and specified (a) Jaquar make (ii) Continental 600mm (Cat.No. ACN-1111N)

TOILET PAPER HOLDER Providing, fitting and fixing Chrome Plated TOILET PAPER holder complete as directed and specified. (a) Jaquar make (ii) Continental toilet paper holder with flap (Cat.No. ACN-1153N)

WASTE COUPLING Providing fitting and fixing chrome waste coupling (half thread HT and full thread FT)complete as directed and specified. (a) Jaquar make (iii) Rupa 50mm (HT/ FT) (Cat.No.WS-0801)

BOTTLE TRAP Providing, fitting and fixing chrome plate bottle trap complete as directed and specified. (a) Jaquar make (ii) Bottle trap (with internal partition) 32mm size with 300mm long wall connection pipe (Cat.No. ALD-769B)

PVC PIPES BENDS JUNCTIONS TEES ETC. Supplying fitting and fixing PVC pipes of 6kgf/cmsq (Supreme/Prince)or other ISI approved including joining fitting and fixing with clamps etc.as necessary complete at all levels including below G.L as directed and specified. (a)In exposed surfaces or in trenches (i) 160mm dia.

(ii) 110mm dia.

(b)Concealed by chiselling or breaking brick wall/C.C/R.C.C and making good to the damages.(ii)110mm dia

(iv) 75mm dia.

.Supplying fitting and fixing 87.5 degree P.V.C bend of(Supreme/Prince) or other ISI approved including joining fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified (a)In exposed surfaces or in trenches

(ii) 110mm dia.

(b)Concealed by chiselling or breaking brick wall/C.C/R.C.C and making good to the damages.

(ii)110mm dia

(iii) 90mm dia.

Supplying fitting and fixing PVC 45 degree bend of (Supreme/Prince) or other ISI approved including joining fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified (a)In exposed surfaces or in trenches

(i) 160mm dia

(ii)110mm dia

(b)Concealed by chiselling or breaking brick wall/C.C/R.C.C and making good to the damages.(ii)110mm dia

(iii) 90mm dia.

Supplying fitting and fixing PVC plain single tee of (Supreme/Prince) or other ISI approved including joining fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified (a)In exposed surfaces or in trenches (i) 160mm dia

(ii)110mm dia

(b)Concealed by chiselling or breaking brick wall/C.C/R.C.C and making good to the damages.(ii)110mm dia

(iii) 90mm dia.

Supplying fitting and fixing PVC single Y of (Supreme/Prince) or other ISI approved including joining fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. (a)In exposed surfaces or in trenches (i) 160mm dia

(ii)110mm dia

(b)Concealed by chiselling or breaking brick wall/C.C/R.C.C and making good to the damages.(ii)110mm dia

(iii) 90mm dia.

Supplying fitting and fixing PVC doubleY with door of (Supreme/Prince) or other ISI approved including joining fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. (a)In exposed surfaces or in trenches (i)110mm dia

(b)Concealed by chiselling or breaking brick wall/C.C/R.C.C and making good to the damages.(i)110mm dia

(ii)75mm dia

Supplying fitting and fixing PVC coupler of (Supreme/Prince) or other ISI approved including joining fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. (a)In exposed surfaces or in trenches (i)110mm dia

(ii) 75mm dia

(b)Concealed by chiselling or breaking brick wall/C.C/R.C.C and making good to the damages. (ii)110mm dia

(iv)75mm dia

Supplying fitting and fixing PVC reducer of (Supreme/Prince) or other ISI approved including joining fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. (a)In exposed surfaces or in trenches (i) 160mm x 110 mm

(iv) 110 mm x 75mm

b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages.(iv) 110 mm x 75mm

Supplying fitting and fixing PVC socket plug of (Supreme/Prince) or other ISI approved including joining fitting and fixing etc.in exposed surface or trenches as necessary complete at all levels including below G.L as directed and specified.(a)110mm

Supplying fitting and fixing PVC cleaning pipe of (Supreme/Prince) or other ISI approved including joining fitting and fixing etc.in exposed surface or trenches as necessary complete at all levels including below G.L as directed and specified.(b)110mm

COWEL 2Providing fitting and fixing PVC cowel of ISI make complete as directed and specified. iv) 75 mm dia PVC cowel of ISI make.

GRATING Providing fitting & fixing CI Grating to the floors complete as directed and specified (a)110mm dia

TOP TILE STRAINER Providing fitting & fixing (150 x 150)mm PVC top tile strainer complete as directed and specified CP Grating to the floors complete as directed and specified

PIPING Providing and fixing CPVC pipe having thermal stability for hot and cold water supply including all CPVC plain and brass threated i/c fixing the pipe with clamp qt 1.0m spacing. Including joining pipes.( A) Exposed on wallSUPREME/ PRINCE/ SFMC BRAND or other equvalent approved brand (High presure pipe Sch-40)d) 25 mm dia

e)20 mm dia

( B) Concealed by chieselling or breaking brick wall/CC wall/RCC wall and making good to the damaged structure.e)20mm dia i)Using Tata(medium)

f)15mm dia i)Using Tata(medium)

BIB COCK Supplying fitting and fixing C.P bib cock 15mm dia of approved brand directed and specified.(G.I & C.P pipes will be measured separately)Jaquare make (iii)2-Way bib cock

STOP COCK Supplying fitting and fixing brass stop-cock (heavy)of Sant make of approved size as mentioned below as directed and specified(G.I & C.P pipes will be measured and paid separately) (i) Brass stop cock( heavy of sant makea)15mm dia (angular)

HEALTH FAUCET CERA MAKE :CG 105A Health faucet brass body with wall hook and 1 metre SS braided rubber hase pipe .

FLUSH COCK. Supplying fitting and fixing Chome plated(CP) Flush cock (heavy)of approved brand as directed and specified(G.I & C.P pipes will be measured and paid separately).Jaquare brand(a) continental / clarion(i) Flush cock with flange 25mm with level plain knob

VALVE Supplying and fitting gun metal country pit valve(full way valve)I.S.I Make as specified and directed.)c) 25 mm dia

d) 20 mm dia.

e) 15 mm dia.

EXTERNAL WATER SUPPLY WORKS: Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes 2000 Lt capacity(a) Sintex make

Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed B) uPVC pipe with uPVC fittings ( Using uPVC high pressure pipe) (Using SUPREME/ PRINCE/ SFMC/ FUSION brand pipe)iv) 32 mm diameter

iii) 25mm diameter

EARTHWORK EARTHWORK IN EXCAVATION Earth work in excavation for foundation trenches of walls, retaining walls, footings of columns, steps and septic tank etc including refilling ( return filling ) the quantity as necessary after completing of work, breaking colds in return filling, dressing, watering and ramming etc.and removal of surplus earth with all lead and lifts as directed and specified in following classifications of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00 m below the existing ground level b) in hard/dense soil

PLAIN CEMENT CONCRETE WORKS Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, wall, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). (a) In prop 1 cement : 3 sand : 6 coarse aggregate by volume

FLAT BRICK SOLING Providing soiling in foundation and under floor with stone/best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering complete. (a) Brick on flat soling

REINFORCED CEMENT CONCRETE WORKS Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement f

Providing and laying plain/reinforced cement concrete works including dewatering if necessary,and curing complete but excluding cost of from work and reinforcment for reinforced cement concrete work (form work and reinforcement will be measured and paid separately)

Using mixture machine (A)In sub-structure up to plinth level

Foundation, Footing,columns with base,tie and plinth beam, grade beam, pilecap, base slab, retaining walls,walls,walls of septic tank, inspection pit and the like and other works not less than 100 mm thick up to plinth level.

P) Using admixture, plasticiser etc for air entraining, water reducing purposes including addition of agent for changing normal setting time of concrete as required.

b) M 20 grade concrete or Prorp.1:1.5:3

BRICK WORK : Brick work in cement morter with 1st class brick including racking out joints and curing compete as directed. (I) In sub-structure upto plinth level including dewatering if necessary (b) In prop: 1:4

1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (providing M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) (A) 112mm thick brick wall (a) In cement mortar in proportion 1:4. (1 cement:4 sand)

SHUTTERING WORKS Providing formwork of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and proping etc. height of proping and centering below supporting floor to ceiling not exceding 4.0 m and removal of the same for in-situ reinforced concrete and plain concrete work in:Foundation, footings, bases of columns, pile cap, raft and mass concrete works, etc. Using 25 mm thick plank.

STEEL AND IRON WORK REINFORCEMENT Supplying,fitting and fixing in position reinforcement bars conforming to relevant I.S Code for R.C.C work/R.B walling including straightening cleaning cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks supports chairs spacers etc.complete(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate)(upto 1st floor level). (A)From Primary producer : TATA/ SAIL/Jindal/Shyam steel/Rinl (i) TMT Corrosion resistant steel(CRS) reinforcement bar

CEMENT PLASTERING 10 mm thick cement plaster in single coat on fair side of brick / concrete walls for interior plastering up to 1st floor level including arises, and / or rounded angles not exceeding 80 mm grith and finished even and smooth including curing complete as directed. a) In cement morter 1:3

WATER PROOFING OF CHAJJAS ROOF SLABS TERRACES SUNKEN SLABS SEPTIC TANK OH TANK RAFT SLAB IN BASEMENT WALLS ETC. Supplying mixing laying and applying the following waterproofing systems over Raft slabs Roof slabs Terraces etc.including curing complete as specified and directed by the Department at all levels. (i) 1mm thick single coat of Master Crete M-81 of Choksey Chemicals/Dr. Sealkit Sealcrete(Asian Chemicals)/Rheomix 131 of BASF mixed with cement in the ratio 1:2 as a prime coat. (ii) 3mm thick Polymer modified mortar Cement sand mortar (in prop 1:3)mixed with Master Crete M-81/Dr. Sealkit Sealcrete (Asian Chemicals)/RHEOMIX 131 of BASF @15% by weight of cement. (iii) 1mm thick coat of Master Crete M-81/Dr. Sealkit Sealcrete (Asian Chemicals)/RHEOMIX) 131 of BASF mixed with cement in the ratio 1:2 as final coat.

MANHOLE COVER ( sanitary & water supply)volume- ii Providing fitting and fixing 450mm dia 90mm thick CI Man hole cover and frame of 38kg weight complete as directed and specified.

EARTHWORK EARTHWORK IN EXCAVATION Earth work in excavation for foundation trenches of walls, retaining walls, footings of columns, steps and septic tank etc including refilling ( return filling ) the quantity as necessary after completing of work, breaking colds in return filling, dressing, watering and ramming etc.and removal of surplus earth with all lead and lifts as directed and specified in following classifications of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00 m below the existing ground level b) in ordinary soil

PLAIN CEMENT CONCRETE WORKS Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, wall, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). (a) In prop 1 cement : 3 sand : 6 coarse aggregate by volume

BRICK WORK : Providing soiling in foundation and under floor with stone/best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering complete. (c).Stone soling of thickness 150mm.( 3 times) total thickness 450mm

REINFORCED CEMENT CONCRETE WORKS Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement f

Providing and laying plain/reinforced cement concrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary,and curing complete but excluding cost of from work and reinforcment for reinforced cement concrete work ( form work and reinforcement will be measured and paid separately

Using mixture machine (A)In sub-structure up to plinth level

Foundation, Footing,columns with base,tie and plinth beam, grade beam, pilecap, base slab, retaining walls,walls,walls of septic tank, inspection pit and the like and other works not less than 100 mm thick up to plinth level.

P) Using admixture, plasticiser etc for air entraining, water reducing purposes including addition of agent for changing normal setting time of concrete as required.

c) M25 grade concrete

PLYBOARD SHUTTERING Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in: Columns, Pillars, Posts & Strut of square/ rectangular/ polygonal in plan or any shape like Tee/L etc. having plane vertical face

Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties.(a) For depth not exceeding 1.0M.

Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like.(a) Floors etc. upto 200mm in thickness.

Vertical surface such as walls (any thickness), parapet walls, partitions and the like including attached pilasters, butresses, plinth and string courses and the like.

OUT SIDE PLASTER. Cement plaster skirting with cement mortar in prop. 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor. (a) 15 mm thick

STEEL AND IRON WORK REINFORCEMENT Supplying,fitting and fixing in position reinforcement bars conforming to relevant I.S Code for R.C.C work/R.B walling including straightening cleaning cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks supports chairs spacers etc.complete(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate)(upto 1st floor level). (A)From Primary producer : TATA/ SAIL/Jindal/Shyam steel/Rinl (i) TMT Corrosion resistant steel(CRS) reinforcement bar

MANHOLE COVER ( sanitary & water supply)volume- ii Providing fitting and fixing 450mm dia 90mm thick CI Man hole cover and frame of 38kg weight complete as directed and specified.

EARTHWORK EARTHWORK IN EXCAVATION Earth work in excavation for foundation trenches of walls, retaining walls, footings of columns, steps and septic tank etc including refilling ( return filling ) the quantity as necessary after completing of work, breaking colds in return filling, dressing, watering and ramming etc.and removal of surplus earth with all lead and lifts as directed and specified in following classifications of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00 m below the existing ground level b) in ordinary soil

SOLING Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (c).Stone soling of thickness 150mm.

CEMENT CONCRETE WORKS PLAIN CEMENT CONCRETE WORKS Plain cement concrete floor base in prop1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete. b) 50mm thick

PAVER'S TILE Proividing polished Multiwyn/DEVI/ VITA tiles of approved quality, size/ shape of specified thickness on pavers over a base course including cutting where necessary finished with flush pointing with Fix-A-Tile(Choksey/Sika/Pedelite/Rouf) white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed (B) DEVI Tiles (Pavers) ii) Of size 300x300 mm of 30 thick

Wiring for light/ fan/ call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco or Equivalent Make as approved by the Deptt.) in recessed conduit wiring system with 2 mm thick 20mm dia rigid low halogen SFT PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) complete SP upto 3.00 metre length.

MP upto 6.00 metre length.

LP upto 10.00 metre length.

Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco or Equivalent Make as approved by the Deptt.) in recessed 2 mm thick rigid low halogen SFT PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete.SP upto 3.00 metre length.

MP upto 6.00 metre length.

LP upto 10.00 metre length.

Wiring for 5 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system including earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 2 mm thick 20 mm. dia. rigid low halogen SFT PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) SP upto 3.00 metre length.

MP upto 6.00 metre length.

LP upto 10.00 metre length.

Wiring for circuit wiring with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system. With 3 x 1.5 sq. mm. cable in 20 mm dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit

With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. cable in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

With 2 x 6 sq. mm. + earth continuity with 1x 4 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) in surface/ recessed PVC 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system.With 4 x 10 sq. mm. + earth continuity with 2x6 sq. mm. cable in 40 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

With 4 x 16 sq. mm. + earth continuity with 2x10 sq. mm. cable in 40 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Supplying including installation of socket outlet 10/16 Amps 3/5 pin combine shuttered complete , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Supplying including installation of socket outlet 6/10/13 Amps

Supplying with fitting fixing of 16 amp one way modular clip in switch, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Supplying with fitting fixing of 6/10 amp one way modular clip in switch, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) in surface/ recessed system complete as per direction of department.3 module

6 module

12 module

Supplying including fitting fixing of following MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department. 3 module

6 module

12 module

Supplying with fitting fixing of blank plate single in modular switch system , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Supplying and fixing of polished Brass Bracket of 18 S.W.G, 25 cm long cast back plate and brass lamp holder complete including connection as approved by the Deptt.)as required Without Lamp

Supplying,installation,testing and Commission of the following indoor Recessed Mounted LED Luminaires complete with all accessories such as driver etc. In the flase ceiling type Armstronng /Gypsum or similar ceiling mouting with necessary support and connection with 1.5 sq.mm. P.V.C. insulated S.C.copper conductor as required and as directed by the department .Philips lighting luminaire 15 W GreenLED Model BBS170 1xDLED -5000 PSU WH/ BBS170 1xDLED -4000 PSU WH or GreenLED Square ModelBBS175 1xDLED -5000 PSU WH/ BBS175 1xDLED -4000 PSU WH or equivalent as approved by the Deptt.

Supplying, installation, connection, testing and Commission of the following indoor decorative recessed typed LED down lighter luminaries complete with all accessories including driver in the false ceiling type Armstrong /Gypsum or similar ceiling mounting with necessary support and connection with 1.5 sq.mm. P.V.C. insulated S.C.copper conductor as required and as directed by the department. (600x600 module) Philips model RC 365 B LED-33-5000 PSU OD WH luminaries down lighter with latest LED technology or equivalent as approved by the Deptt..

Supplying,installation,testing and Commission of the following LED lamp as directed by the department .Philips LED bulbs non-dimmable 7 W or equivalent as approved by the Deptt.

Supplying, installation, connection, testing and commissioning of the LED Bulkhead luminaries complete with all accessories on wall by providing necessary arrangement and connection with 1.5 sq mm. PVC. insulated S.C. copper conductor as required and as directed by the department. Philips 10 W, model WT 202 W LED 6S CW PSU SI PC or equivalent as approved by the Deptt..

Installation of earth station with 40mm dia and 4.5 mtr. long GI pipe with necessary GI reducing socket 40mmx20mm size locking arrangement with hinged cover plate, funnel, GI nuts, thorough bolts etc.for putting pipe and refitting with necessary enclosure on the top etc. as required complete.

Extra for using salt 5Kg and charcoal 64 Kg. for pipe earth electrode as required.

Supplying and laying with 6 SWG GI earth wire at 0.50 mtr. below ground level or conductor earth electrode including soldering, excavation work and refitting etc.as required complete.

Supplying including fitting fixing of following star rated A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection cable, as approved by the Deptt.s etc. as required complete and as directed by the Department [Without regulator]. (ORIENT PSPO make / Usha make/ CROMPTON make/ Havells/ ATC/ V GAURD make).Energy efficient 5-star 1200 mm sweep. ORIENT PSPO / Usha / CROMPTON / Havells/ ATC or equivalent make

Supplying including fitting fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department. Power Flow 225 mm sweep (ORIENT make)

Supplying including fitting fixing of following A.C. Wall fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department.ORIENT make or equivalent Usha make . Air Circulator wall fan 450 mm sweep Turbo force

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 double door surface mounting TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider MG, legrand, Hager make) 4way TPN (4+12) double door

Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.C Series (Schneider MG, legrand, Hager make) 6-32A

Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz 4P RCCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 100/300mA sensitivity 4P RCCB (ABB, Schneider MG, legrand, Hager make)63A

Supply and laying of following size Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988, LT armoured U.G. cable laid in pucca flooring, road crossing, drain crossing as per site requirement and partially in air to connection as approved by the Depts. the control switch, through medium duty G.I. pipe (Tata/ Nezone make or equivalent as approved by the Deptt) bend and socket including excavation and refilling the trench and making good damage done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make)Core - 3 & 1/2 A2XWY A2XFY. 70.00 Sq.mm 3&1/2 Core U.G. cable in 50mm dia medium duty G.I. pipe

Supplying with fitting and fixing panel mounting open execution 25KA 415V 50Hz 4P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure) of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.25 KA 415V 50 Hz 4P MCCB (Schneider, legrand, Siemens, Indo Asian make) 125A

(b) By Carpet grass (Axonopus affinis)

(b) BY CARPET GRASS (Axonopus affinis) :

POT PLANTING Supplying and planting of terrestrial orchids with required size of pot including filling the pot to the top surface with appropriate soil media made of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 4 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned)(A) With Aeirides (I) Using earthen pot of 30 cm dia.

(II) Using earthen pot of 60 cm dia.

(D) With Vanda (hybrid) (I) Using earthen pot of 30 cm dia.

(II) Using earthen pot of 60 cm dia.

Supplying and planting of house plants in required size of pot including filling the pot to the top surface with appropriate soil media of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 6 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned) (A) With Fancy leaf caladium/Coleus.(i) Using earthen pot of 30 cm dia.

(ii) Using earthen pot of 60 cm dia.

(B) With Indian rubber plant / Prayer plant (i) Using earthen pot of 30 cm dia.

(ii) Using earthen pot of 60 cm dia.

(C) With Fragrant dracaena / Silver net leaf / Philodendron / Devil's back bone /Peperomea/Croton (i) Using earthen pot of 30 cm dia.

(ii) Using earthen pot of 60 cm dia.

(D) With Peacock/spider/Umbrella (i) Using earthen pot of 30 cm dia.

(ii) Using earthen pot of 60 cm dia.

(E) With Maiden hair fern/Aloe/Boston fern/Swiss cheese plant/Forget me not(i) Using earthen pot of 30 cm dia.

(ii) Using earthen pot of 60 cm dia.

(F)With Marry Christmas begonia / Polypodium / Aluminium plant (I) Using earthen pot of 30 cm dia.

(II) Using earthen pot of 60 cm dia.

(G) With English Ivy (I) Using earthen pot of 30 cm dia.

(II) Using earthen pot of 60 cm dia.

(H) With Iron Cross Begonia (I) Using earthen pot of 30 cm dia.

(II) Using earthen pot of 60 cm dia.

(K) With Bird nest fern/Good luck plant Supplying and planting of palms with required size of pot including filling the pot to the top surface with appropriate soil media made of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 4 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned) (A) With Bottle palm(I) Using earthen pot of 30 cm dia.

(II) Using earthen pot of 60 cm dia.

(B) With Erica palm (Butterfly palm)/ Kentia palm(I) Using earthen pot of 30 cm dia.

(II) Using earthen pot of 60 cm dia.

(C) With Chinese Palm(I) Using earthen pot of 30 cm dia.

(II) Using earthen pot of 60 cm dia.

(D) With Fan Palm /Finger palm(I) Using earthen pot of 30 cm dia.

(II) Using earthen pot of 60 cm dia.

Supplying and planting of cactus in required size of pot including filling the pot to the top surface with appropriate soil media made of garden soil, sand, cow-dung, fertilizer, pesticides as per specification and necessary maintenance for a period of 6 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned) (A) With Peanut Cactus / Rat tail Cactus(I) Using earthen pot of 30 cm dia.

(II) Using earthen pot of 60 cm dia.

(B) With Prickly pear (I) Using earthen pot of 30 cm dia.

(II) Using earthen pot of 60 cm dia.

(C) With Parodia globular(I) Using earthen pot of 30 cm dia.

(II) Using earthen pot of 60 cm dia.

BED PLANTING Supplying and planting of Dahlia / Chrysanthemum / Gladiolus on the ground ( bed planting, bed size 45 cm x 45 cm x 45 cm) including the preparation of the soil, providing organic manure and fertilizer, pesticides as per specification and necessary maintenance for a period of 4 months from the date of planting complete as specified and directed .

HEDGE PLANTING / EXTERNAL HEDGE Supplying and planting of suitable plant materials for preparation protective / external hedge (50 cm wide) including the preparation of the ground by mixing organic manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed . (A) ADOPTING SINGLE ROW PLANTING METHOD (i) With Duranta

(ii) With Kamini

(B) ADOPTING CROSS WISE DOUBLE ROW PLANTING METHOD (i) With Duranta

(ii) With Kamini

EDGE PLANTING / INTERNAL HEDGE Supplying and planting of suitable plant materials for edge making / Internal hedge(20 cm wide) including the preparation of the ground by mixing organic manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed . (A) ADOPTING SINGLE ROW PLANTING METHOD (i) With Duranta

(ii) With Coleus

TREE PLANTING Supplying and planting of ornamental trees (1'-0" height sapling) including pit making ( 60 cm x 60 cm x 60 cm ), filling the pit with appropriate soil media, manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed . SHADE TREE (A) Neem / Mahaneem / Beef wood / Bakul / Acacia / Siris / Devils tree / Kadam / Palash / Pink Cassia / peepal / Silver oak / Simalu / Ajar

(B) Kanchan / Nahar / Arjunu

(C) Sonaru

SHRUB PLANTING Supplying and planting of ornamental shrub ( below 1'-0" height ) including pit making ( 60 cm x 60 cm x 60 cm ), filling the pit with appropriate soil media, manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed . (A) Radhachura / Krishnachura / Rat ki rani / Ixora / Jetuka

AQUATIC PLANT Supplying and planting of aquatic plants ( water Lily and Lotus )after preparation of under water soil including organic manuring, supplying the required quantity of water and maintenance for a period of one year from the date of completion complete as specified and directed.

Edging with bricks laid dry lengthwise including excavation, refilling, consolidating with hand packing and spreading neatly surplus earth within a lead of 50 m.

Providing cladding with Green Building compliant Modified Clay Material (MCM) of Tunch/Phomi or equivalent brand of specified size and texture with base thickness of 2.5mm on internal/external walls/floors including surface preparation, cleaning & cutting, applying 1-2mm thickness of recommended specific adhesive on the MCM panel and pasting the MCM product on walls/floors finished with grouting and flush pointing (with recommended grouting material with coloured pigment to match panels as approved and directed by the Department)

Brick Design of "Burnt Umber" Shade of size 225x60mm Extra (In case of grooves) for putting spacers in between the grouts to maintain uniform grooves and making good with grout and finish as described in Item 1.1

Ritumoni Kalita

Subhash Ch Pathak

CARAPACE INFRA AND FORMLINE TECHNOLOGIES PVT LTD