REPAIRS TO PLUMBING, JOINERY, TILLING AND MISC WKS IN THE AREA OF QUEENS GARDEN AND CERTAIN AREA UNDER AGE B/R (CENTRAL) UNDER GE (NORTH) PUNE

Amount

Material and labour for roof tiles Mangalore pattern interlocking at side joints, laid dry including dismantling single layer Mangalore pattern or similar tiles in roofing and rubbish off the premises complete all as specified and as directed.

All as per serial item No.1.00 here-in-before but except tiles.

Material and labour for ridge or hip tiles to suit Manglore pattern of roofing tiles,bedded and jointed in cement mortar (1:6) etc incl dismantling of tile and rubbish off the premises complete all as specified and as directed.

Supply and fix for 2nd class hardwood clean sawn tile battens, cross sectional area exc 5 and n.exc 15 Sqcm spaced at 30 cm centres to centres fixed with nails complete incl dismantling of scantling and rubbish off the premises all as specified and as directed. (NOTE:Measurements shall be taken overall including both battens and spaces. Deductions shall be made only for openings exceeding 0.40sqm each).

All as per serial item No.4.00 here-in-before but except batten.

Material and labour for 2nd class hard wood, clean sawn, in scantling timber work incl dismantling of scantling and rubbish off the premises all as specified and as directed.

All as per serial item No.6.00 here-in-before but except timber.

Material and labour for preparation of battens, any size and spacing and treated all over (measured overall on one side only, spaces not deducted) with two coats of creosote oil complete all as specified and as directed.

Dismantling of wooden boarding any description and in any position complete all as specified and directed.

Supply and fix Fibre board Eaves/Weather Boarding 18 mm thick or Feather Edged 15mm to 18mm thick and fixed with 30mm Lap, complete of approved arch pattern any size and shape all as specified and as directed.Make: Shera wall/Everest

Dismantling plain or corrugated steel sheeting , any gauge or any thickness, as in roof coverings complete all as directed.

Supply and fix for 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc with grade of zinc coating 120gms/ Sqm complete all as specified and as directed.

All as per serial item No.12.00 here-in-before but except sheeting.

Supply and fix in repairs 0.56mm thick plain, Aluminium sheeting, alloy 31000H4 in ridges, hips, valley gutter, crumple joint, drip and straight flashing (length and girth as fixed) complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing with all fittings and connections including cleaning for refixing or removal to store complete all as directed.

Taking up or down 20 mm bore steel tubing with all fittings and connections including cleaning for refixing or removal to store complete all as directed.

Refixing 20mm dia old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) complete all as directed.

Refixing 15mm dia old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) complete all as directed.

Supply and fix for 15 mm bore GI tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

Supply and fix for 20 mm bore GI tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

Material and labour for PP-R gate valves (brass insert) of 20mm outer dia. of pipe complete including taking down old unserviceable valve all as specified and as directed.

Material and labour for PP-R gate valves (brass insert) of 25mm outer dia. of pipe including taking down old unserviceable valve complete all as specified and as directed.

Material and labour for cutting chases in brick wall, not exc. 10cm girth, pinning in for concealed water tubing and making good to facings where required and pointing to cement mortar (1:3) complete all as specified and as directed.

Material and labour for PCC (1:2:4) type B-1 (using 20 mm graded broken stone aggregate) as in bed blocks/ bed plates including necessary form work all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frame) area exc.1.5 sqm and not exc.4 sqm each complete all as directed

Taking down chowkats or frames with shutters (without taking off shutters from frame) area not exc.1.5 sqm each complete all as directed.

Taking down shutters of any description, area not exc.1 sqm each complete all as directed.

Taking down shutters of any description, area exc.1 sqm and not exc. 2 sqm each complete all as directed.

Taking down shutters of any description, area exc.2sqm each complete all as specified and as directed.

S&F Factory made 100 % solid wood plastic composite (WPC) door frame, double rebate 125 mm x 45 mm made from wood plastic composite ( Single executed process) material with density 780 Kg/ Cum, all as specified and directed.NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

Material and labour for 2nd class hardwood, plain, solid straigtht chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and as directed .

S&F factory made 100% solid wood plastic composite (WPC) 28 to 30 mm thick board in door shutter complete all as specified and directed. Make: Rajshri/ Sintex/ Duraplast/ Accucell

Supply and fix for 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze,etc.(without sash bars), edges of framing plain,chamfered or rounded, fitted with cut and mitred beads for securing glass,etc; the size of the rail and stile as specified in SSR Part-I, Section 8, clause 8.24 (a) complete all as specified and as directed.

Supply and fix for stainless steel wire cloth 0.36 mm nominal dia of wire, average width of aperture 1.40 mm, fixed with tinned tacks or galvanised wire staples complete all as specified and as directed

Removing excavated soil, debrises obtained from demolition from various locations (other than this work) from site to outside MOD land complete all as as directed. The location at out side MOD land for disposal shall be located by the contractor himself).

S&F Factory made 100 % solid wood plastic composite(WPC) door frame, single rebate 90 mm x 45 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum and complete all as specified and directed.NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

Supply and fix for aluminium powder coated louvered ventilator with provision of exhaust fan opening using ‘Jindal” aluminium section or equivalent make as specified including glass 3mm thick ordinary quality, frosted and stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture etc including taking out old frame shutter complete all as specified and directed.

Supply and fix for aluminium powder coated three track sliding window with two glazed shutters, one with 4mm thick float glass ordinary quantity and one shutter with stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make as specified. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

Supply and fix for 300mm long aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, ISI marked, complete all as specified and as directed.

Supply and fix for 300mm long brass sliding door bolts with sand or die cast brass hasp, staple (bolt type) and fixing bolt with roller or drawn brass bolts, ISI marked, complete all as specified and as directed.

Supply and fix for 200mm long aluminium anodised, barrel tower bolts of extruded section, complete all as specified and as directed.

Supply and fix for 150 mm long aluminium anodised, barrel tower bolts of extruded section, complete all as specified and as directed.

Supply and fix for butt hinges, 100mm size, mild steel cold rolled, medium weight complete all as specified and as directed.

Supply and fix for 75mm size butt hinges, extruded brass with mild steel hinge pin, bright polished and fixed type D-11 complete all as specified and as directed.

Supply and fix for floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, overall length of cover plate 150mm all as specified and as directed.

Supply and fix for 100mm size brass handles, extruded, fabricated type, polished complete all as specified and as directed.

Supply and fix for 150mm size extruded aluminium alloy handles fabricated type anodised complete all as specified and as directed.

Supply and fix for brass locks, cupboard, grade 1, 75mm size, 6 levers with duplicate keys with brass key hole complete all as specified and as directed.

Supply and fix in repairs for 300mm, mild steel, ordinary rat tail rod pattern spring (helical spring) including roller and roller plate complete all as specified and as directed.

Supply and fix in repairs for aluminium (extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed

Supply and fix in repair brackets for drapery/ curtain rod, decorative type, powder coated aluminium section as per sample kept in GE (N) Pune office complete all as specified and as directed.

Supply and fix in repairs drapery/ curtain rod of 25mm dia, decorative type, powder coated aluminium section complete all as specified and as directed.

Supply and fix in repairs antique rod of 25mm bore as in curtain rod decorative type section as per sample kept in GE (N) Pune office complete all as specified and as directed.

Supply and fix in repairs for antique double rod brackets to suit the curtain rod of 25mm dia, decorative type brass coated section complete all as specified and as directed.

Supply and fix in repairs for floor door stopper of brass body and tongue with hard drawn steel spring of over all length of cover plate 150mm complete all as specified and as directed.

Supply and fix in repairs for floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, overall length of cover plate 150mm all as specified and as directed.

Supply and fix in repairs for 150mm size extruded aluminium alloy handles fabricated type anodised complete all as specified and as directed.

Supply and fix in repairs for 10mm thick corner glass of size 250mm x 300mm with stainless steel decorative type railing on front face and fixed with 3 Nos 'D' type stainless steel brackets complete all as specified and as directed.

Supply and fix for brass mortice lock, vertical type, size 100mm grade-1 of 4 levers with duplicate key complete all as specified and as directed.

Supply and fix in repairs for Garware Sun Control polyster film, 50 micron, reflective type fixed on existing glass panels complete all as specified and as directed.

Dismantling asbestos cement (plain, corrugated, semi corrugated etc.) sheets in roof coverings complete all as specified and as directed.

Supply and fix 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws with two corrugation side lap complete all as specified and as directed.

Supply and fix for fibre glass reinforced translucent corrugated sheeting 2.00 mm thick with two corrugations side lap fixed with coach screw and washer in roof, wall etc. complete all as specified and as directed.

Material and labour for french polishing on wooden surface of any description, width or girth including cleaning and preparing the surfaces with a coat of wood filler and applying one or more coats of french polish till the desired finish is obtained complete all as specified and as directed.

Material and labour for preparation of old treated plastered or unplastered/ concrete surfaces by brooming down with steel brush over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for preparation of new untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Material and labour for preparation of old surfaces of walls and applying one coat of white wash complete all as specified and as directed.

All as per serial item No. 67 here-in-before but on ceiling.

M & L for Preparation of old treated plastered surface of wall by scrapping, removing loose paints etc. and making good surface by applying white birla/JK wall putty wherever required, smoothen surface by rubbing with sand paper and applying one coat of acrcylic distemper complete all as specified and as directed.

All as per serial item No. 69 here-in-before but on ceiling.

Material and labour for preparation of old treated wooden surfaces of any description over 10cm girth or width not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.

All as per serial item No. 71 here-in-before but on steel surfaces.

Material and labour for preparation of old painted wooden/asbestos surface on ceiling and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for complete removal of existing treatment on walls using steel wire brush , sanding machine, rubbing ivory papers etc and washing, rubbing down and stopping of distempered and painted surfaces, preparing surfaces ready to receive new finish complete all as directed.

All as per serial item No. 74 here-in-before but on ceiling.

Material and labour for old plastered/ treated surfaces and applying POP (Plaster of Paris) punning 8 to 10mm thick to make the surface to uniform in true line and plumb, the surface shall be finished smooth to ensure no undulations or loose particles appears on the face and ready to receive finish complete all as specified and as directed.

Material and labour for applying one coat of white cementitious putty on wall and making the surfaces smooth by rubbing with sand paper to achieve finished surface complete all as specified and as directed.

All as per serial item No. 77 here-in-before but on ceiling.

Material and labour for applying one coat of alkali resistant priming paint on walls complete all as specified and as directed.

All as per serial item No. 79 here-in-before but on ceiling.

Material and labour for appying two coats of acrylic distemper of approved tint on wall surfaces complete all as specifie and as directed.

All as per serial item No. 81 here-in-before but on ceiling.

Material and labour for preparation of old plastered surfaces of wall and applying one coat of plastic emulsion paint complete all as specified and as directed.

Material and labour for preparation of old plastered surfaces of wall and applying one coat of lustre paint (water based) complete all as specified and as directed.

All as per serial item No. 84 here-in-before but on ceiling.

Material and labour for preparation of old treated plastered or unplastered surfaces of walls and applying one coat of cement base paint complete all as specified and as directed.

Material and labour for preparation of newly plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of cement primer complete all as specified and as directed .

Material and labour for preparation of old decorated surfaces and applying one coat of 100% acrylic exterior emulsion paint to mangalore tiles, roof, parapet, wall etc. complete all as specified and as directed by Engineer-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as directed.

Material and labour for double charged coloured vitrified tiles 10mm thick (square/rectangular) polished, area of each tile exc. 0.18Sqm but not exc. 0.36 Sqm as in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles, laid over and including 20mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

Material and labour for double charged coloured vitrified ceramic tiles of size 600mm x 150mm x 10 mm thick as in vertical surface, pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and as directed.

Material and labour for coloured non skid ceramic tiles of size 300mm x 300mm x 7mm thick of colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 20mm thick screed bed in cement mortar (1:6) as in floors complete all as specified and as directed.

Material and labour for coloured non skid ceramic tiles of size 400mm x 400mm x 7mm thick of colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 20mm thick screed bed in cement mortar (1:6) as in floors complete all as specified and as directed.

Material and labour for coloured glazed ceramic tiles of size 300mm x 200mm x 7mm thick of colour as in dado/ skirting and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick backing coat in cement mortar (1:4) complete all as specified and as directed.

Taking down cement plaster on brick or stone wall including raking out joints, hacking for key, scrubbing down with water and removing rubbish off the premises complete all as specified and directed.

Material and labour Brick work with old size fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 including demolition of brickwork built in cement mortar and removing rubbish off the premises complete all as specified and directed.

Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick or concrete surfaces in two layers (10mm + 5mm) mixed with integral water proofing compound @ 3% by weight of cement with second layer, finished even and smooth without using extra cement complete all as specified and as directed. (Note: Supply only waterproofing compound will be measured and paid separately).

Supply only integral water proofing compound.

Supply and fix in repairs for vitreous china white, wash down water closet (pedestal pattern) cascade type ‘P’ trap, in built seat cover and flushing cistern, low level, valveless, symphonic action type complete with inlet ball valve, float and handle complete all as specified and as directed. Make :- Hindware , catalogue No. 20028/ 20024 Constellation, 21038 cistern, pastel (complete set) or equivalent from Cera/Parryware. Note :- If Cat No. is revised, equivalent cat No. from latest catlauge shall be considered.

Supply and fix in repairs for PVC cabinet with looking mirror, single shutter of size 500mm X 400mm complete all as specified and as directed. Make: Prayag cat part No., 556 or equivalent of Commander as approved

Material and labour for cast iron Nahani trap, with grating of diameter of outlet 75mm including jointing to waste pipe fixed in PCC (1:2:4) type B-1 (using 20mm graded broken stone aggregates) complete all as specified and as directed.

Supply and fix PVC (SWR) gully trap 150mm, setting and jointing with solvent cement complete all as specified and as directed.

Note : 1. Rerformance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site. 3. The site is in scattered area. The building(s)/site(s) shall be handed over in phases and the contractor will have to arrange his working programme accordingly. No claim whatsoever for not giving the entire site on award of work and for giving the site gradually will be admissible, except granting fair and reasonable extension of time.

SAGAR ENTERPRISES

Sanjay Glass

J P ASSOCIATES

R J ENTERPRISES

VIRENDRA FABRICATORS

M/s Asrani and sons

ANIL CONSTRUCTION CO.