Maint/MMPPNA/2023-24/60

Amount

NH17 at Matiabag to Darchuka via Silairpar Bazar (Ch 325.00 m to 4325.00 m) Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1. Private Land

Sarifying the existing bituminous roadc surface to a depth of 150mm and disposal of scarified material with a lift up to 3.00m and lead up to 1000m as per technical specification

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC and compacting with smooth wheel roller to achieve the desired density, complete as per Clause 401. II) For Grading II Material

Providing , laying, spreading and compacting stone aggregates of specified sizes to water bound macadam specification including spreading in uniform thickness , hand packing ,rolling with 3 wheels 80-100KN static roller in stages to proper grade and camber, applying and brooming stone screening / binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density as per Technical Specification Clause 405. (2) Grading - II (Screening A). B) By Manual Means

Providing , laying, spreading and compacting stone aggregates of specified sizes to water bound macadam specification including spreading in uniform thickness , hand packing ,rolling with 3 wheels 80-100KN static roller in stages to proper grade and camber, applying and brooming stone screening / binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density as per Technical Specification Clause 405. (3) Grading - III (Screening B). A) By Manual Means

Providing and laying interlocking concrete block pavement (M40) having thickness 80mm as per echnical specification clause 1504 including carriage., 32 nos block per sqm a) including Edge block/Edge restraints, Using block 32 nos/Sqm, Basket Weave design only.

Extra cost for for colour CC Block 25%

Providing and fixing of typical PMGSY informatory sign board with logo as per MORD soecifications and drawing .Three MS plates of 1.6mm thick ,top and middile plate duly welded with MS flat iron 25x5mm size on back edges .The lower plate will be welded with MS angle iron frame of 25mmx25mmx5mm .The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos .75mmx75mm of 12SWG Sheet tubes posts duly embedded in cement concrete M15 grade blocks of 450mmx450mmx600mm,600mm below ground level.The top most diamond plate will be welded to middile plate by 47mmx47mmof 12SWG steel tube.All M.S. will be stove enameled on both sides.Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour.All sections of framed posts and steel tube will be painted wityh primer and two coats of epoxy paint as per drawing clause 1701 and Annexure 1700.1

Reinforced Cement concrete M15 grade Kilometre stone/local of Standard design as per IRC :8 fixing in poition including painting and printing etc as per drawing and technical specifications clause 1703 (ii) Ordinary Kilometre Stone (Precast)

Reinforced Cement concrete M15 grade Kilometre stone/local of Standard design as per IRC :8 fixing in poition including painting and printing etc as per drawing and technical specifications clause 1703 (III) 200m Stone

Providing and fixing retro reflectorised cautionery, mandatory and informatory sign as per IRC:67 made encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting 1.5 mm thick supported on a mild steel angle iron post 75mmx 75mmx 8mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concreyte 450mmx450mmx600mm below ground level as per drawings and technical specification Clause 801. 600mm equilateral triangle

Providing and fixing retro reflectorised cautionery, mandatory and informatory sign as per IRC:67 made encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting 1.5 mm thick supported on a mild steel angle iron post 75mmx 75mmx 8mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concreyte 450mmx450mmx600mm below ground level as per drawings and technical specification Clause 801. 600mm circular

Providing and fixing retro reflectorised cautionery, mandatory and informatory sign as per IRC:67 made encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting 1.5 mm thick supported on a mild steel angle iron post 75mmx 75mmx 8mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concreyte 450mmx450mmx600mm below ground level as per drawings and technical specification Clause 801. 800mm x 600mm rectangular

RCC Guard post : Supplying , fitting and fixing RCC Guard post 150cm long errected 75cm above the ground and 75cm below the ground with M-15 grade (nominal mix 1:2:4) broken stone aggregate up to 20mm size ) of cement concrete and required reinforcement toed in posiotion with annealed black wire including centering moulding the top , curing including painting concrete surfaces in 23 cm strips up to 0.75m from the top alternately in black and white and having 2 nos reflective band of desired shade etc complete as per design and as directed (b) 15cm dia RCC guard post with reinforcement of 4 nos 12 mm dia TMT main steel bars and 6mm TMT/MS stirrups at 15cm c/c

Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust ,oil , grease ,efflrescense and applying paint @ of 1 litre for 2 sqm (B) RCC Railling

Overhead RCC Gate at ch 0.00m Excavation for Structures (Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. I. Ordinary soil (b)'With dewatering '(i)upto 3 m depth

Prviding brick soling in earthen shoulder with stone/best quality jhama brick, sand packed and laid to true line and level and in panel after preparing the subgrade including earthwork in excavation as directed including all labour and materials and if necessary dewatering, complete. A) Brick on flat soling

Plain/Reinforced cement concrete, in foundation complete as per drawing and technical specification and steel shuttering formwork RCC gr M-20

Plain/Reinforced cement concrete, in Super structure complete as per drawing and technical specification and steel shuttering formwork RCC gr M-20

Supplying, fitting and placing TMT bar reinforcement in Foundation complete as per drawing and technical specifications ( B) TMT-IS 1786 (Fe-500 D) Secondary producer (ISI approved)

Supplying, fitting and placing TMT bar reinforcement in Superstructure complete as per drawing and technical specifications ( B) TMT-IS 1786 (Fe-500 D) Secondary producer (ISI approved)

Providing and erecting direction and place identification retro- reflectorised sign , fixed over MS sheeting, 3 mm thick with area exceeding 0.9 sqm supported on a mild steel hollow bar 50x 50x 4 mm supported on 200 mm dia RCC coloumn as per drwaing and detai specification

Lettering and arrow marks on sign board to be provided separately as per actual requirement. Rates for these items have been analysed separately

Plastering with cement morter(1:3) in brick work in sub structure as per technical specification.

Painting two coats including prime coat after filling the surface with synthetic enamel paint in all shades on new plastered/ concrete surface as per drawing and technical specification