Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.7 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹35.7 L+₹1.3 L (3.79%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹37.3 L+₹2.9 L (8.52%)Rejected-Finance D 91 BLOCK D AMITY GREEN HASEMAU LUCKNOW PIN 226028 | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226028 | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹37.9 L+₹3.6 L (10.4%)Rejected-Finance | L4 | Rejected-Finance Being L4 |
Tender Value
₹47.2 L
EMD Value
₹94,400
Closing Date
12 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (East) Prayagraj
Stanley Road, Teliyarganj, Prayagraj
SPL REPAIR TO CERTAIN BLDGS AT MH VARANASI.
2023_MES_627704_1
8686/E8
Open Tender
Civil Works
Item Rate
180 days
Varanasi
As Per NIT
8 documents required · 8 mandatory
₹500
GE (East) Prayagraj
₹94,400
Yes
17 Feb 2024
9 Nov 2023
15 Dec 2023
9 Nov 2023
12 Dec 2023
28 Nov 2023
Amount
Demolition of cement concrete of any description and in any position reinforced (reinforcement cut as required to facilitate demolition) not other wise specifically provided for complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.
M&L for 25mm thick Cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate in levelling course, benching etc, finished even & rough to receive cement mortar screed bed complete all as specified and directed.
M&L for 75mm thick Cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate in levelling course, for floor benching etc, finished even & rough to receive cement mortar screed bed complete all as specified and directed.
M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006, 60 mm thickness M-35 Grade with grey cement and pigment including 25mm thick sand cushning complete all as specified and directed.
M&L for 75 mm thick plain cement concrete 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection, finished surface even and smooth without using extra cement, complete all as specified and directed.
Dismantling floor hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for Non - skid Coloured Ceramic tiles 7 to 8 mm thick, area of each tile exc 0.18 sqm but n'exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 20 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.
M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n'exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.
M&L for Glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match in coloured cement to match tiles over and including 10 mm thick rendering layer in CM (1:4) complete all as specified and directed.
M&L for Heavy duty parking/ outdoor tiles 9 to 10 mm thick (square/rectangular), area of each tile exc 0.11 sqm but n' exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.
Demolition of brick work built in cement or cement lime mortar complete all as specified and directed.
M&L for Brick work with old size sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.
M&L for Brickwork with old size sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and directed.
Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for Rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished even and fair complete all as specified and directed.
M&L for Rendering 10 mm thick in cement mortar 1:4 on other than fair faces of brick work or concrete surfaces, finished even and fair complete all as specified and directed.
M&L for Rendering 5 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even and fair complete all as specified and directed.
S&F GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste complete all as specified and directed.
M&L for applying two coats of Oil bound distemper on wall in approved colour/shade over a coat of primer over 1mm thick wall care putty after preparation new plastered or un plastered surfaces of walls complete all as specified and directed.
M&L for applying two coats of cement base paint on wall in approved colour/shade over a coat of primer over 1mm thick wall care putty after preparation new plastered or un plastered surfaces of walls complete all as specified and directed.
M&L for applying three coats of white wash on ceiling after preparation new plastered or un plastered surfaces of ceiling complete all as specified and directed.
M&L for complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces and preparing old decorated plastered surfaces of wall etc. and applying two coats of Oil bond distemper over one coat of primer over 1mm thick wall care putty complete all as specified and directed.
M&L for complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces and preparing old decorated plastered surfaces of wall etc. and applying two coats of cement base paint over 1mm thick wall care putty complete all as specified and directed.
M&L for complete removal of existing treatment (any number of layers) from old surfaces of ceiling and applying two coat of white wash complete all as specified and directed.
Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed.
M&L for 15-20mm thick Green Marble work (table rubbed and polished) for wall lining (veneering to wall) 25mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed .
Taking down chowkhat with shutters (W/O taking off shutters from the frame) area of opening exc. 1.50 Sqm but n exc. 4 Sqm each complete and all as specified and directed
Taking down chowkhat with shutters (W/O taking off shutters from the frame) area of opening n exc. 1.50 Sqm each complete and all as specified and directed
Taking down shutters of any description area exc 1.00 Sqm but n exc 2.00 Sqm each, and removing from site, complete all as specified and directed .
M&L for aluminium door single leaf sliding with powder coated aluminium frame of section 62.5 x 37 x 1.5 mm thick, shutter with bottom & middle rail of section 112.50 x 37 x 1.5mm thick, styles & top rail of section 83 x 37 x 2.5 mm thick having centrally locking arrangement with lock make of 'GODREJ' or 'LINK' seven lever, self closing device with rebate including jointing cleats, fixing of builders hardware fittings, necessary numbers of sliding roller and glazing with 5.5mm thick ordinary plain glass including necessary fittings, fixtures & aluminium snap beads complete all as specified & directed.
M&L for aluminium three track sliding window / CSW / Ventilator with powder coated aluminium anodized top, bottom and side of aluminium section 61.85 x 31.75 x 1.2 mm thick, shutters having styles & rails of powder coated aluminium section 44.45 x 44.45 x 1.2mm thick including lock, jointing cleats, glazing clips, rubber packing, aluminium snap beading, screws anodized aluminium fittings such as hinges, tower bolts, handles etc, 5.5mm thick ordinary plain glass, providing and fixing powder coated aluminium chequered grill of anodized section of mesh 50 x 50mm of 08 mm dia of aluminium bar fixed to frame with 20 x 2mm aluminium flat with screw and stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified & directed.
M&L for aluminium fixed type window / CSW / Ventilator with powder coated aluminium anodized top, bottom and side of section 61.85 x 31.75 x 1.2 mm thick, shutters having styles & rails of section 44.45 x 44.45 x 1.2mm thick including lock, jointing cleats, glazing clips, rubber packing, aluminium snap beading, screws anodized aluminium fittings such as hinges, tower bolts, handles etc including 5.5mm thick ordinary plain glass complete, providing and fixing powder coated aluminium chequered grill of anodized section of mesh 50 x 50mm of 08 mm dia of aluminium bar fixed to frame with 20 x 2mm aluminium flat with screw complete all as specified & directed.
S&F aluminium extruded section body door closer hydraulically regulated designation No. 3 universal type suitable for aluminium door shutters weight of shutter between 61 to 80 Kg complete all as specified & as directed.
S&F solar/sun control film having 25 micron reflective type stacked to glass panes of aluminium doors or windows as required as per instruction of manufacturer complete all as specified and as directed.
S&F factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified / required as per instruction of manufacturer complete all as specified and as directed.
S&F 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and jointed at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm ( + 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by insuring horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, as specified / required as per instruction of manufacturer complete all as specified and as directed.
M&L for Rolled mild steel sections conforming to Gde Fe-410-0 (Grade E-250) quality A as in framing for cladding, glazing and the like including door frames/chowkats, cooler stand fixed with angle cleats and connecting plates, etc complete all as specified and directed.
S&F 200 mm long aluminium anodised tower bolt of extruded section, complete and all as specified and directed
S&F Aluminium alloy, anodised, sliding door bolt 250 mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.
S&F butt hinges, medium weight, cold rolled mild steel, 100 mm size complete all as specified and directed.
S&F Aluminium handles, cast type anodised, 150mm size complete all as specified and directed.
S&F Hasp and staple 150 mm size, safety type aluminium anodised with mild steel hinge pin including bolt to hinge plate, fixed with screws complete all as specified and directed.
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete and all as specified and directed
M&L for 18/19mm thick prelaminated particle board, exterior grade prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and directed .
S&F Continuous (piano) hinges, mild steel, bright finish or electro galvanised width of flaps 30mm (when open) complete all as specified and directed.
M&L for applying one coats of synthetic enamel paint including preparing old painted steel & iron surfaces of any description over 10 cm in width or girth and complete all as specified and directed.
M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparing new steel & iron surfaces of any description over 10 cm in width or girth and complete all as specified and directed.
M&L for Reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in chajjas (reinforcement to be measured separately) complete all as specified and directed.
M&L for form work to chajja or slab and similar work for flat rough finished surface of concrete complete all as specified and directed.
M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for Mild steel TMT bars 6 to 8 mm dia as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.
Taking up or down steel tubing and connections and supply and fixing 15mm dia GI steel tubes, medium grade with all fitting and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
Taking up or down steel tubing and connections and supply and fixing 20mm dia GI steel tubes, medium grade with all fitting and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
Taking up or down steel tubing and connections and supply and fixing 25mm dia GI steel tubes, medium grade with all fitting and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and directed.
S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), 500 litres capacity, ISI marked double layered, hoisted and fixed in position including connecting up pipes including ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 20 mm bore size (minimum weight 210 gms) including dismantling water tanks and removing from site complete all as specified and directed.
S&F in repair 20mm PVC nipple suitable for HDPE water tank. (Minimum weight 45gms) complete all as specified and directed.
S&F in repair PVC low level flushing cistern 10 litres capacity, white, with all fitting and fixtures including brackets and 32 mm bore PVC flush pipe , complete all as specified and directed.
S&F in repairs Vitreous china squatting pan ‘Orissa’ pattern, size 580 x 440 mm, white coloured, with integral foot rests, including provision of lime concrete bedding complete all as specified and directed.
S&F Vitreous china coloured wash down water closet pan (Pedestal Pattern), (fixed in repair), including connection to flush pipe, 'P' or 'S' trap, with fixing bolts PVC seat cover with chromium plated mild steel hinges device, complete all as specified and directed .
S&F Health faucet (ABS Body) mild steel chromium plated in repair suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.
S&F in repair Brass CP mixture for mixing hot and cold water, single hole type as in WHB, screwed down for iron pipe for 15mm dia bore pipe, complete all as specified and directed.
S&F in repairs Vitreous china wash basin, white, flat back, size 550x400 mm including pedestal and brackets and cutting for and pinning in ends of brackets, complete all as specified and directed.
S&F in repair stainless steel soap dish complete all as specified and directed.
S&F in repair Brass chromium plated shower rose 125 mm size with swivel joints, complete all as specified and directed.
S&F in repair Tubular towel rail of brass chromium plated, 20 mm dia, 'D' type, 60 cm long between flanges including brackets complete all as specified and directed.
S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.
S&F in repair fancy type bib taps cast copper alloy chromium plated with crutch or butter fly handle screwed down screwed for iron pipe 15mm bore complete all as specified and directed.
S&F in repair 15 mm dia fancy type chromium plated with long shank and cup angle valves cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete and all as specified and directed
S&F in repair 15 mm dia stop valves cast copper alloy chromium plated long shank(concealed type), screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed.
S&F in repairs grating doom 125 mm dia with waste hole of PTMT (min weight 40 gms) complete all as specified and directed.
S&F stainless steel tubing of 25 mm dia for curtain rod fancy type and brackets, socket and knobs (wall to wall or flush to wall) for securing to curtain rod, fixed in repair complete all as specified and directed.
S&F in repair 110mm PVC (SWR) pipes single socketed , in any length with rubber ring, joints, laid in trenches or in floors complete all as specified and directed.
S&F in repair 110mm PVC (SWR) pipes single socketed , in any length with rubber ring, joints, fixed to walls complete all as specified and directed.
S&F in repair 75mm PVC (SWR) pipes single socketed , in any length with rubber ring, joints, laid in trenches or in floors complete all as specified and directed.
S&F in repair 75mm PVC (SWR) pipes single socketed , in any length with rubber ring, joints, fixed to walls complete all as specified and directed.
S&F 110mm bore PVC (SWR) bends any radius complete all as specified and directed.
S&F 75mm bore PVC (SWR) bends any radius complete all as specified and directed.
S&F 110mm bore PVC (SWR) junction single (Single T)equal or unequal complete all as specified and directed.
S&F 75mm bore PVC (SWR) junction single ()equal or unequal complete all as specified and directed.
S&F 110mm PVC (SWR) Vent cowl complete all as specified and directed.
S&F 75mm PVC (SWR) Vent cowl complete all as specified and directed.
S&F in repairs PVC (SWR) floor trap, plain with grating including jointing with solvent cement including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) suitable for 75mm bore pipe complete all as specified and directed.
Demolition and breaking up drain pipes Internal dia of pipe in 150 mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar ® complete all as specified and directed.
M&L for 150mm dia Salt-glazed stoneware drain pipes laid in trenches and jointed as specified including Bends and taper bends, any radius complete all as specified and directed.
M&L Concrete bed to 150 mm bore drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested; in, PCC 1:3:6 type C2 (using 40mm graded stone aggregate) complete all as specified and directed.
S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S&F in repair Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/ plastic cleats (minimum weight 300 gms) complete all as specified and directed.
S&F in repair 15mm bore fancy type pillar tap cast copper alloy with capstan head chromium plated screwed down high pressure with or without lettered 'hot' or 'Cold' with long screwed shanks and fly nuts fixed to pipe complete all as specified and directed.
M&L for Plain cement concrete, 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate) as in surface channels or drains, complete all as specified directed.
M&L for Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc, complete all as specified directed.
Dismantling Asbestos Cement (corrugated or semi corrugated etc)sheet roof coverings complete all as specified and directed..
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of colour having tensile strength of 550 mpa as in roof covering/cladding to wall fixed with welf tapping screws complete all as specified and directed.
S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets , snap grid and hangers complete all as specified and directed.
S&F suspended false ceiling using E board of size 605mm x 605mm x 4mm thick white pre-laminated self embossed, texture Insulation and acoustic purpose to be placed on at any height on hot dipped galvanised iron imposed grid with 24mm wide T section powder coated. The frame work shall comprises of main runner made with 0.35mm thick GS sheet and of size 24x32x300mm spaced at 1200mm maximum centre to centre with hangers of 4mm dia GI wire to be fixed with rawl plugs, adjusted with screws (last hanger at the end if each main runner shall not be greater than 450mm from adjacent wall , flush fittings of 1200 mm long cross tee with double stitching to be interlocked between main runners at 600mm c/c from cross tee more than 600mm to be supported independently and double to be formed by fittings 600mm long cross tee centrally between the 1200mm cross tee, perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19 mm and 300mm long of white colour including making hole in board for provision of light fittings including complete all as specified and directed.
M&L for Rolled mild steel sections conforming to Gde Fe-410-0 or Fe-310-0 as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed.
M&L for cement concrete 1:2:4 , type B0 (using 12.5mm graded crushed stone aggregate)mixed with WPC @ 2% by weight of cement in roof kerbs or mud stops, roof padding, rounded or chamfered on edges and misc surfaces using water proofing compound, complete all as specified and directed. (Note: water proofing compound shall be paid separately).
Removing / taking down of old water proofing treatment from roof/concrete surfaces removal to distance exc 250 Mtr complete all as specified and directed.
M&L for water proofing treatment over cleaned roof surface with APP modified bituminous membrane weight not less than 3 Kg per Sqm including testing , comprising of the following:- [a] 10 mm thick rendering or screed bed or bedding layer in cement sand mortar 1:4 mixed with water proofing compound @ 3%by weight of cement and surface finished even & fair. [b] Applying one coat of bitumen primer @ 0.3 Litre per Sqm on plastered surface. [c] Applying one coat of hot blown bitumen 85/25 grade @ 1.2 Kg per Sqm. [d] Providing APP modified polymeric water proofing membrane having weight not less than 3 Kg per Sqm with 100 mm wide side or end lap and joint sealed with flamed torched pasted over full length [e] Applying one coat of hot blown bitumen 85/25 grade @ 1.2 Kg per Sqm. [f] Spread coarse sand over entire bitumen surface and than topping with 40mm thick brick tiles laid over & including 15 mm thick screed bed in cement sand mortar 1:6 & joints shall be pointing with CM 1:3 complete all as specified and directed.
Supply only integral water proofing compound complete all as specified and directed.
Taking down carefully aluminium point wiring(any type)for one light point, fan point ,exhaust fan point, bell point, power point complete including all fittings such as switches, socket, pendants holder, ceiling rose, sketch fittings, tube light fittings, regulators unscrewing the switch sockets, ceiling rose, regulators from boards/outlet boxes and making good the disturbed surfaces of wall/ ceiling and colour washing matching with the existing colour wash complete all as specified and directed.
M&L for point wiring with PVC insulated unsheathed, 1100 volts grade cable 1.5 Sqmm (nominal area) FRLS type multi stranded copper conductor, single core drawn in and including not less than 20 mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring for one light/fan/bell/buzzer / exhaust fan point controlled by one, one way switch, including concealed pressed steel terminal box of required size not less than 1.0 mm thick factory made duly painted inside & outside with two coats of black bituminous paint over & including a coat of red oxide primer, with 2.8 mm thick top cover of plastic laminated sheet of required colour for mounting switch, sockets, fan regulator etc including 1.5 Sqmm FRLS type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to earth dolly as required at site& including chases cutting & making good disturbed surface & applying finishes to match existing surface complete all as specified and directed.
Ditto- all as item No. 105 here-in-before but one 3 pin, 5amp socket out let on independent board using 2.5 Sqmm wiring cable complete all as specified and directed.
Ditto -all as item No.105 here-in before but 3pin ,5amp socket out let on the same board with other switch using 2.5 Sqmm wiring cable complete all as specified and directed.
Ditto -all as item No.105 here-in before but using 4.0 Sqmm wiring cable complete all as specified and directed.
M&L for sub main wiring with two single core PVC insulated & unsheathed cable 6.0 Sqmm (nominal area) FRLS type having multi-stranded copper conductor drawn in and including not less than 20 mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring with and including 6.0 Sqmm FRLS type PVC insulated unsheathed cable multi-stranded copper conductor as earth wire connected to common earth as per IS & cutting chasing for conduit & sinking for boxes & making good to walls disturbed surface & applying finishes to match existing surface complete including taking down of existing sub main wiring complete all as specified and directed. NOTE : Three runs of cable and PVC conduit shall be measured as a one unit length.
S&F for switch piano, flush type, 5 amps, single pole , one way , 230 volt complete all as specified and directed.
S&F for 2/3 pin, 5 Amp/ 6 Amp , socket outlet, flush type, 2 in 1 complete all as specified and directed.
S&F lamp holder PVC/Polycarbonate type with cord grip cap/back plate suitable for batten/angle /pendent fitting complete all as specified and directed.
S&F LED retrofit lamp of capacity 12/15 watt, B-22 holder base with polycarbonate body and aluminium heat sink warm white complete including taking down old/ unserviceable CFL/bulb complete all as specified and directed.
S&F switch socket combination 2 in 1, 6 pin 16Amps multipurpose type 240 volts complete all as specified and directed.
S&F ceiling rose single phase , PVC poly carbonate, insulated body three terminals ISI marked complete all as specified and directed.
S&F stepped type electronic fan regulator flush type AC 230 volt suitable for any type of ceiling fan complete all as specified and directed.
S&F in repair 8 way SPN sheet metal enclosure factory made for MCB, double door, 240 Volts with 200 Amp rated bus bars complete all as specified and directed.
S&F Isolator/MCB SP 240 Volt 6 To 32 Amp ISI marked conforming to 'B" curve, breaking capacity 10 KA complete all as specified and directed.
S&F Isolator SPN 40 amp 30mA for earth leakage, over load and short circuit protection ISI marked complete all as specified and directed.
M&L for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below GL with top edge of plate not less than 1.50 m below normal ground level) connected to galvanised earth lead wire 4.0 mm dia (7.5m) as means of bolts, nuts, check nuts and washer besides brazing at all joints as shown on drawings and including excavation, earth work, GI pipe (ISI mark) light grade 15 mm bore for protection of GI wire from earth electrode to and including the earth test point, supplying and laying charcoal dust, common salt, PCC 1:3:6, type C-1(using 20 mm graded crushed stone aggregate ) chamber and mild steel angle iron frame 40 x 40 x 3 mm and 40 mm thick pre-cast RCC cover 1:2:4 , type B-1(using 20 mm graded crushed stone aggregate ) reinforced with 8 mm dia TMT bars @ 75 mm C/C both ways with mild steel handle 12 mm dia, PGI funnel and wire mesh, 20 mm dia GI pipe light grade(ISI marked) for watering all as shown in electrical plate No 3 of SSR Part-I and connected to earth test point including testing of earthing & dismantling /taking down existing old / unserviceable earthing complete all as specified and directed. Note:-The rates quoted shall also deemed to include the cost of Earth test point and earth wire and protection pipe up to 7.5 meter beyond the earth plates electrode.)
S&F in repair recess mounting 36W 2'x2' LED slim panel (595x595mm) fittings including making connection with PVC insulated three core flexible copper conductor cable with connector block and making good the disturbed surface complete all as specified and directed.
S&F in repair DB VTPN 6 ways with metal double door ,IP -43 protection , 415 volts 3 phase with appropriate size copper bus bar and neutral link and making good disturbed wall/surfaces all as required at site complete all as specified and directed.
S&F in repair DB VTPN 4 ways with metal double door ,IP -43 protection , 415 volts 3 phase with appropriate size copper bus bar and neutral link and making good disturbed wall/surfaces all as required at site complete all as specified and directed.
S&F MCCB 3 Pole, 415 V, Adjustable type, 250 Amps with breaking capacity 36 KA complete all as specified and directed.
Supply and fix MCCB 3 Pole, 415 V, Adjustable type, 100 Amps with breaking capacity 16 KA complete all as specified and directed.
S&F Isolator/MCB TP 415 Volt 63 Amp ISI marked conforming to 'B" curve, breaking capacity 10 KA complete all as specified and directed.
Supplying ,laying, commissioning & testing XLPE LT cable, 95 Sqmm , 3.5 core , insulated armoured, electric power cables (heavy duty) 1100 Volts grade with standard aluminium conductor including taking down existing old /unserviceable cable complete all as specified & directed.
Excavation in trenches in soft/loose soil not exceeding 1.5 M wide and not exceeding 1.5 Mtr deep and getting out including filling bottom surface to required level or slope for laying of pipes/ cables complete all as specified and directed.
Returning filling including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft soil complete all as specified and directed.
Removing excavated surplus soil not exceeding 50 Mtr and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and directed.
M&L for sand cushioning with dry local sand for cable protecting under ground cable (8 cm before laying the cable and 15 cm after laying the cable) in trenches including punning the sand up to 18 cm thick and consolidated complete all as specified and directed.
Supply and laying dry well burnt locally available brick sub class 'B' modular bricks laid flat with width equal to the length of whole bricks over cable as cable protection complete all as specified and directed.
M&L for bore hole for passing cable through / insertion of 40/50 mm dia GI pipe under PCC road/ taxi track/ runway/ hard standing up to the depth 450mm to 1200 mm complete all as specified and directed. NOTES :- (i) Cost of equipment's, tools & plants, material required for boring shall be deemed to be included in unit quoted rates above. (ii) GI pipe shall be measured and paid separately.
S&F for 50 mm dia GI pipe 'light grade' ISI marked including fittings such as bends, tees, sockets etc fixed on wall/pole or laid in trenches under road crossing/hard standing including taking out old /unserviceable existing pipe complete all as specified and directed.
Fixing only LED tube light fitting ,20/22 Watt ,decorative type ,slim aluminium square profile ,high lumen output energy efficient ,direct surface mounting including connecting up with twin core PVC insulated copper conductor of suitable size, including taking down the old unserviceable light fittings. Note : light fittings obtained from item No 104 shall be reused.
S&F LED integral ultra slim round shape surface mounting high power LED luminaire , dome shape opal diffuser lamp of capacity 18w complete including taking down old/ unserviceable CFL/bulb complete all as specified and directed. Make : Orient Cat part No LDSER-18-C or equivalent
Supply and installed hi wall split units indoor/outdoor complete with cordless remote control unit and with in built cooling ,air ioniser and plasma filter for better indoor air quality of capacity 2 TR, Digital Inverter twin rotary variable speed compressor, single phase units 220V - 240V, 50 Hz, electric driven, minimum 5 star rated, complete all as specified and directed.
S&F Voltage stabilizer for automatic operation, SP naturally are cooled in door type designed for input variation 170 V to 250 V output stabilized at 230 V with accuracy of +- 2.5% and capacity 5 KVA complete all as specified and directed.
S&F LED edgelite linear & compact 9W mirror light with decorative grey end caps ,polycarbonate body and ribbed opal diffuser including taking down the existing unserviceable light/mirror fittings complete all as specified and directed.
S&F Single pole and neutral sheet metal enclosure with a two pin and earth plug and socket with one single pole MCB single pole 20 amp complete all as specified and directed.
S&F exhaust fans of metallic body heavy duty AC single phase 230/ 240 V of size 300 mm sweep with bracket, louver shutters, nuts & bolts including connection with PVC copper flexible wire for Exhaust fans complete all as specified and directed.
S&F LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed..
S & F Building security/street LED light fitting 35 watt IP-65 protection pressure die cast aluminium body ,heat resistant glass ,including driver and making necessary electric connection with 2.5 sqmm twin core copper wire 1.5 long complete fixed in GI pipe fixed to bldg complete all as specified and directed.
Prem Singh
Matrubhoomi Construction
Sudularush Construction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .