SPECIAL REPAIR TO BUILDING NO P-710 SS COLONY AT BB CANTT, SRINAGAR

Amount

Taking down chowkats or frames n exc 1.5 Sqm each ( without taking off shutters from the frames), complete all as specified and directed.

Taking down chowkats or frames exc 1.5 Sqm but n. exc 4.00 Sqm each( without taking off shutters from the frames), complete all as specified and directed.

Taking down shutters of any description n exc 1sqm each, complete all as specified and directed.

M & L 2nd class shoft wood, plain straight, solid chawkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, supplied and fixed, complete all as specified and directed.

S & F 35mm thick, 2nd class hard woodplain framed panlled shutters (any numbers of panels) of 2nd class hard wood with panels of timber flat on both sides or of veenerred particles boards medium density, wood particle board with commercial face veneers, complete all as specified and directed.

S & F 35 mm thick, 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamferd or rounded, fitted with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Part-I Section 8 Clause 8.24(a), etc , complete all as specified and directed

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples, complete as specified and directed.

S & F 18/19mm Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination fixed with screws to timber frame work, complete all as specified and as directed.

S&F solid PVC door frames of size 50mm X 47mm made out of 5mm plain color PVC sheet reinforced with MS square tube, complete all as specified and directed

S&F factory made solid panel PVC door shutter, 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded, plain colour PVC "C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as per specification and drawing, complete all as specified and directed

S & F 100mm long butt hings heavy weight cold rolled mild steel & fixed to chowkats, complete all as specified and directed.

S & F aluminium anodised barrel tower bolts of size 150 mm extruded section and fixed, complete all as specified and directed.

S & F 150mm long aluminium handle cast type anodised, complete all as specified and directed.

S & F aluminium alloy anodised sliding door bolt of size 250 mm with hasp, staple and fixing clips of sheet, cast or extruded sections and fixing, complete as specified and directed.

S & F M S 300 mm ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed

S & F 150mm floor door stopper of aluminium alloy body and tounge,anodised,with hard drawn steel spring ,fixed in floor, complete all as specified and directed.

S & F Aluminium powder coated (powder coated of required colour) three track sliding windows frame top & sides of size 92 x 31.75 x 1.50mm (section No 20831), bottom of size 92 x 31.75 x 1.50mm (section No 20832) and shutter top & bottom of size 40 x 18 x 1.55mm (section No 20736) and side (handle) of size 40 x 18 x 1.55mm (section No 20738) and lock side shutter frame of size 40 x 18 x 1.45mm (sectio No 20737) and for wire guage shutter of size 18 x 43.50 x 1.35mm (Section No.20791) with locking arrangement including stainless steel wire mesh 0.36 mm nominal dia of wire with 1.40mm average aperture and fixed with stainless steel wire staples and providing 5.5mm thick tinted glass with necessary rubber beading gasket and aluminium (anodised) grill, square, ractangular or similar section, fixed with channel of size 38 x 12 x 13mm etc including making good to the disturbed surfaces, complete all as specified and directed.

S & F aluminium (powder coated with approved colour) ventilator, partialy glazed and partialy louvers, outer frame & mullion fabricated with aluminium section of size 82.50 mm x 38.00 mm x 1.70 mm thick (Cat No 20036), half portion glazed with 4 mm thick frosted glass including rubber beading, & glazing clip, half portaion louvers of 80 mm wide & 4 mm thick frosted glass including aluminium louver patti including S.S wire gauge of fixing of 0.36mm dia and 1.40 width of aparture with 25x3mm think aluminium strip with screw to upper half portion of ventilator all fitting & fixture and fixed in position and aluminium (anodised) grill, square, ractangular or similar section, fixed with channel of size 38 x 12 x 13mm etc, complete all as specified and directed.

S & F in repair curtain rails, harrison rail, aluminium alloy chromium plated with fixing brackets, stops, rollers etc., complete all as specified and directed.

Taking down cement plaster from brick walls including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.

M & L for 15mm thick rendering on brick work or concrete surface in cement mortor 1:4 to be finished even and smooth without using extra cement, complete all as specified and directed.

M & L for 15mm thick rendering on brick work or concrete surface in cement mortor 1:6 to be finished even and smooth without using extra cement, complete all as specified and directed.

M&L for 5mm thick rendering in cement mortar (1:3) as in ceiling, soffits of slab and finishing the surface even & smooth without using extra cement , complete all as specified and as directed .

M&L for Preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer, complete all as specified and directed.

M & L for preparing surface of newly plastered walls and applying two coats of oil bond distemper over chalk whitening preparatory to distempering, complete all as specified and as directed.

M & L for preparing newly prepared surfaces of ceiling and applying two coats of oil bond distemper over chalk whitening preparatory to distempering, complete as specified and directed.

M&L for preparing old surface of walls and applying one coats of cement base paint, complete all as specified and directed.

M & L preparing old surface of walls and applying one coats of oil bond distemper, complete all as specified and directed.

Dismantling boarding, any description, fixed in any position, complete all as specified and directed.

S & F 20 mm thick, second class hard wood boarding clean sawn, planed one side with butt joints and fixed with nails in any situation as in eaves board, etc., complete as specified and directed.

S & F 12mm Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete as specified and directed.

S & F 18/19mm Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work ,complete all as specified and directed.

S & F 75mm long butt hings medium weight cold rolled mild steel & fixed to chowkats, complete all as specified and directed.

S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of brass, polished , complete all as specified and directed.

S &F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed, complete all as specified and directed.

Dismantling timber scantling 40 sq cm & over in section , any position in unframed work, complete as specified and directed.

S&F 2nd class soft wood clean sawn timber fixed in scantling, complete all as specified and directed.

Dismantling of wall & celling boards (fiber pulp insulation etc) or insulation boards/slabs /blankets any thickness, including cover fillets. , complete all as specified and directed.

M&L for 6mm thick plywood, grade BWR, type BB, fixed with nails to timber frame work, fixed in ceiling, complete all as specified and directed

S&F 6mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative one face veneers on faces fixed in ceilling with screws to timber frame work , complete all as specified and as directed.

S&F Second class shoft wood plain fillets square, rectangular or triangular in section, clean sawn, secured with nails, cross sectional area exc 6 and n.exc 13 Sqcm, complete all as specified and directed.

M&L for preparation of new surfaces of wooden or wooden based articles of any description, exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauging, thickness, in roof covering, complete all as specified and directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S&F Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws , complete all as specified and directed.

Demolition of cement concrete (un reinforced) in ground floor and paving n.exe 15 cm thickness (below or above ground level) complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified directed.

M&L 25 mm thick plain cement concrete 1:2:4 type B-1 ( using 20 mm graded stone aggregate) as in sub base of floors finished even and fair, complete all as specified and as directed.

M&L for Virified Ceramic light shade tiles 10 mm thick (square/ rectangular polished, area of each tiles not exceeding 0.36 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in cement to match white or coloured over and including 15mm thick screed bed or bedding layer in cement mortar 1:4 , complete all as specified and directed.

M&L Vitrified Ceramic light shade tiles 10 mm thick (square/ rectangular polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in cement white or coloured to match the existing surface and including 10mm thick bedding layers in cement mortar 1:3, complete all as specified and directed.

M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:4 , complete all as specified and directed

M&L for glazed ceramic coloured tiles of size 350x250x7mm /450x300x7mm thick, best quality as in skirting, dados, walls, vertical surfaces etc., set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles, over and including 10mm thick rendering in CM 1:4, complete all as specified and directed.

M & L 75 mm thick, plain cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection / hard standing etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand 1:2, complete as specified and directed.

M&L for 100mm thick plain cement concrete 1:2:4 type B-2 Using 40mm graded crushed stone aggregate, as in foot path/ floors, complete all as specified and directed.

M&L for chequered cement concrete tiles 30cm X30cmX25mm thich set, joined and pointed in neat cement slurry in floors with grey cement and with grey cement and pigment over and including 15mm thick screed bed or bedding layer in cement mortar 1:4 , complete all as specified and directed

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position, complete all specified and directed.

Form work to soffits of suspended slab such as roof slab, landings and similar work . (Horizontal or sloping). For fair finished surface exc 200 mm thick , complete all as specified and directed.

M & L for reinforced cement concrete 1 : 2 : 4 Type B-1 ( using 20 MM graded crushed stone aggregate) as in slabs supported on walls beam and colums in floors, roofs, landind, deck slabs and shelves and the like, complete all specified and directed.

S & F TMT steel bars 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking end and binding with and including MS wire annealed not less than 0.9 mm dia but in stirups, complete all as specified and directed

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any motar., complete all as specified and directed.

M&L for Granite (of any type) work ,20 mm thick, (table rubbed and polished) in steps jambs , pillars ,window cills ,cooking platforms ,and the like in cement mortar (1:4) including pointing in white cement (1;2) using marble dust with admixture of pigment to match with shade of granite laid over and including 15mm thcik screed bed or bedding layer in cement mortor 1:4 , complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 15 mm dia, complete all as specified and directed.

Supply and fixing GI water tubing 15 nmm bore medium grade galvanised with all fittings like socket, union, elbow, bend, etc. jointed and fixed to walls, ceilings or laid on floors , complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 20 mm dia, complete all as specified and directed.

Supply and fixing GI water tubing 20 nmm bore medium grade galvanised with all fittings like socket, union, elbow, bend, etc. jointed and fixed to walls, ceilings or laid on floors , complete all as specified and directed.

M&L for lagging to pipes of internal dia 15 mm used in internal water supply or plumbing all round with, 25 mm thick bonded mineral wool preformed 'SNAPON' pipe sections of density 144 Kg/cum conforming to IS-9842 with 0.01 mm aluminium foil, complete all as specified and directed.

M&L for lagging to pipes of internal dia 20 mm used in internal water supply or plumbing all round with, 25 mm thick bonded mineral wool preformed 'SNAPON' pipe sections of density 144 Kg/cum conforming to IS-9842 with 0.01 mm aluminium foil, complete all as specified and directed.

S&F in repair, plate rack of overall size 24 x 24 x 10 Inch made out of 0.63mm thick stainless steel, complete all as specified and directed.

S&F in repair kitchen sinks with drainage board made of stainless steel 1mm thick with plugs, washers and waster, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and conneting union to pipe overall size 915mm x 460mm bowl size 410 x 330 x 160mm , complete all as specified and directed..

S&F in repair Corner glass shelf size 300mm for bath room fiting , complete all as specified and directed.

S&F in repair glass shelf size 500x60mm for bath room fiting, complete all as specified and directed.

S&F in repair wall mixture 2-in-1 in bathroom and sink mixture for kitchen, complete all as specified and directed.

S & F in repair tubular towel rail 20mm dia, D type, 60cm long between flanges brass chromium plated, complete all as specified and directed.

S&F in repair 125mm Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union, complete all as specified and directed.

S & F in repair 15 mm bore CP Bib taps fancy type, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S & F in repair Stop valves/ angle valve 15mm bore fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.

S&F in repair wash hand basin vitreous china size 550x400mm white flat back including CP pillar tap heavy duty as approved by GE ,waste,chain plug,pvc connection, PVC waste pipe, completed all as specified and as directed.

S&F in repair 15mm bore CP Mixer for mixing hot & cold water screwed down for iron pipe and fixed for WHB / Sink with double action, complete all as specified and as directed

Demolition of cemen Concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

M&L for 15mm thick, rendering in cement mortar 1:3 on concrete/brick work of sunken portion, mixed with Dr Fixit pidiproof LW+ or equivalent @ 200ml/50Kg of cement and fixed 32mm GI pipe sport each room, complete all as specified and directed

M&L for applying two coats of flexible polymer acrylic water proofing coating, 1mm thick (Dry film in two coats) using Dr Fixit pidifin 2K of M/S Pidilite Industries or equivalent including necessary pond testing for 48 hrs in sunken portion complete all as specified and directed.

M&L for treatment to sunken stab by applying primer @ 0.5 Kg/Sqm over the prepared suface and hot blown cutback bitumen @ 0.70 Kg/Sqm providing and laying polythene film 150 microne thick with cutback bitumen adhesive on min 15cm overlap, complete all as specified and directed.

M&L for Plain cement concrete (1:5:10), type E2, using 40mm graded stone aggregate in sunken floor surface finished fair, complete all as specified and directed.

Providing plain cement concrete 1:2:4, type B-0 using 12.5 mm graded aggregate 25mm average thickness as in sunken floor of wc/bath/toilet finished even and smooth without using extra cement mixed with water proofing compound Dr Fixit pidiproof LW+ or equivalent at 200ml/50kg of cement, complete all as specified and directed.

S&F in repairs, vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe), with integral foot rest including provision of lime concrete bedding, connection to trap and anti syphonage pipe etc complete including making good to floor, complete all as specified and directed.

S & F in repair vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), complete all as specified and directed.

S&F in repairs PVC flushing cisterns 10 liters capacity including flushing pipe and connections complete, complete all as specified and directed.

S&F in repair PVC connection of PTMT nuts 15x450mm long, complete all as specified and as directed.

S&F in repair grating doom 75 mm dia with waste hole of PTMT.(Minimum weight 25 gms) with grating for sutiable size, complete all as specified and as directed.

Taking down PVC pipes including all fittings like shoes, bends, swan necks etc of any dia, complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in wall, complete all as specified and directe

S&F 75 mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in wall, complete all as specified and directed.

S&F PVC (SWR) bends 110 mm dia any radius, complete all as specified and directed.

S&F PVC (SWR) bends 75 mm dia any radius, complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top) hoisted and fixed in position including all accessories of capacity 1000 ltrs, Make : Sintex/Star/Polycon, Fusion or equvalent incl S&F ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 20 mm dia and including taking up/down old existing UNSV storage water tank of capacity 1000 litres, complete all as specified and as directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and as directed.

M & L brick work with sub class 'B' bricks straight or curved on plan to any radius built in cement mortor1: 6, complete all as specified and directed.

M & L for precast reinforced cement concrete 1 : 2 : 4 type B1, using 20 MM graded crushed stone aggregate, as in cover slab (for manholes etc), chajjas, mangers, shelves etc. set in cm 1 : 6 complete with joints to math, complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting outt in soft/loose soil complete as specified and directed.

M & L 150mm Salt-glazed stoneware drain pipes laid in trenches and jointed, complete all as specified and directed.

M & L for plain cement concrete 1 :4: 8 Type D2 using 40 mm graded crushed stone aggregate as in bed to drain pipes 150 mm bore including packing under and haunching against the sides of pipes after they are laid and tested, complete as specified and directed.

Returning, filling in, including spreading levelling, watering and well ramming in layers n exc 25 cm in soft/loose soil, complete all as specified and directed.

M&L Removing Excavated soils not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point, complete all as specified and directed.

M&L for taking down carefully existing old burnt out / unserviceable aluminium / copper point wiring system any type/ size and any description complete for light, fan,bell,socket, power points etc complete including removing the all type of fittings & fixture alongwith it connected fixing acessories such as all switches, sockets, ceiling roses, holder,regulators,bell etc complete and removing of all the old materials from the site for to taking as a schedule of credit, complete all as specified and directed.

M&L for making single phasing point wiring system used as copper conductor wire for phase and neutral wiring system the wire made out of PVC insulated FRLS of 1100 volt grade with having multistranded copper conductor wire of size 1.5 Sq.mm Nominal area drawn through wiring system surface on wall with the help of PVC casing capping strip in any lengthy wiring system and along with its all connected fittings accessories including providing of pressed steel terminal sunken boxes and duly fixed it concealed in wall and overed to top with electro plated with plastic laminated sheet for housing/mounting of switches sockets, regulators etc and including using /drawing of one run of single wire 1.5 sqmm PVC insulated FRLS wire 1100 volt grade with multistranded copper conductor wire used as a continuous earth wire for point wiring complete system and including making the good to all disturbed surfaces of wall/ceiling area of new wiring system and to match to it as per the existing surface of wall/ceiling etc. for the following, complete all as specified and directed.

One light point / fan point controlled by one switch of one way point wiring system complete, complete all specified and directed.

One 3/5 pin type 5 Amp socket outlet point fixed on same board and controlled by one switch of one way point wiring system complete , complete all specified and directed.

One 3/5 pin type 5 Amp socket outlet point fixed on independent board and controlled by one switch of one way point wiring system complete , complete all specified and directed.

One bell point and controlled by one bell push switch of one way point wiring system complete , complete all specified and directed.

Description of all as per Serial item No 07here-in -before, but using single runs of PVC insulated FRLS wire ,1100 volt grade with multistranded copper conductor wire of size 2.5 Sq. mm Nominal area for15 Amp socket outlet point wiring system with controlled by one way switch and also providing of 2.5 sqmm PVC insulated FRLS wire , 1100 Volt grade (ISI Marked) with multistranded copper conductor wire used as continuous earth wire, complete all as specified and directed.

Supply and fixing of switch paino flush type single pole one way 5/6 Amps, complete all as specified and directed.

Supply and fixing of socket outlet 3 pin type 5/6 Amps, complete all as specified and directed.

Supply and fixing of switch flush type single pole one way 15/16 Amps, complete all as specified and directed.

Supply and fixing of socket outlet 5 type 15/16 Amps, complete all as specified and directed.

Supply and fixing of bell push flush type single pole one way 5/6 Ampscomplete all as specified and directed.

Supply and fixing of bell Ding Dong Type, 220 volt AC, Single Pole, complete all as specified and directed.

Supply and fixing ceiling rose 03 terminals type made out of polycarbonate, isolated body complete all as specified and directed.

Supply and fixing of step type electronic fan regulator flush type with having hum free step alongwith speed control know suitable for single phase, complete all as specified and directed.

Supply and fixing of LED tube light fitting of 1x 20W/22W 220V AC decorative box type with driver, holder including LED tube light with having energy efficient type complete including providing of suitable type flate fexible cable for electric connection from ceiling rose to fitting, comlplete all as specified and directed .

Supply and fixing of LED mirror light fitting with high out put diffuuser 2 feet long of 10 Watt 220 volt AC decorative type with driver holder and LED lamp with having energy efficient type complete including providing of suitable type flate fexible cable for electric connection from ceiling rose to fitting, comlplete all as specified and directed .

Supply and fixing of angular/batten type shape lamp holder with PVC/ Polycarbonate insulated body, alongwith adhapor and back plate for housing of bulb complete all as specified and directed .

Supply and fixing surface mounted LED bulk head luminaries light fitting of rated capacity 10W including LED lamp & driver suitable used for out door type with dust and water proof with energy efficient complete and including providing of suitable type of flate fexible two/three core cable and making electric connection complete all as specified and directed.

Supply and fixing of LED street light fitting of rated capacity 50Watt 230 volt AC with having LED driver,lamp bracket with impact and corrosion resistant complete and suitable for out door type made out of high pressure die cast/PVC hosing with heat resistant glass complete light fitting set including providing of suitable dia of GI bracket and it to as per match/setting the fitting fixture base hole attechment system and including providing of suitable type of flate fexible two/three core cable and making electric connection all as specified and directed.

Supply & fixing of ventilating exhaust fan made out of complete sturdy Engineering plastic body with having motor ,frame louvers & shutter and blade suitable for of size 200 mm sweep suitable opearing of 230 Volts including making of suitable type /size of hole on wall/window area etc., compete all as specified and directed.

Supply and fixing of sheet metal enclosure duly powder coated with double pole and neural enclosure with a two pin and earth plug and top and having mounting chanel and complete with one 01 MCB SP 16/20 Amp and making all necessary electrical connection and dully fixed surface on wall and making good the disturbed wall surface all as required at site, compete all as specified and directed.

Supply and fixing of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrengment system suitable of size/type for vertical type distribution board vertical loadline type of rating VTPN 4 way type 415 volt 3 phase AC supply holding system with IP protection rating with ISI marked and having fitted neutral and earth link bus bar and mounting base chanels and blanking plates suitable for holding of main MCCB as incommer and out going MCB complete system alongwith providing and mounting in side of DB box of 01 No of MCCB TP 100 Amps with breaking rupting capacity 16 KA and having adjustable setting & Adjustable magnetic type and also providing of 06 Nos of MCB SP 63 Amps 10KA 'C' curve type of the same manufacture make as per of distribution board make complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical and also refixing the all electric meter and making its wiring connection including taking down of existing meter and DB's, complete all as specified and directed

Supply and fixing of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrengment system suitable of size/type of distribution board of rating SPN 12 way type 220 volt AC supply system with ISI marked and having neutral and earth link bus bar and mounting base chanel suitable for holding MCBs incommer and outgoing system complete set and including dully fixed surface on wall and making all necessary electrical and also refixing the all electric meter and making its wiring connection including taking down of existing meter and DBs complete all as specified and directed

Supply and fixing of MCB SPN 63 Amps, 230 Volts, 50 Hz AC supply suitable for 'C' series, 10 KA breaking capacity, complete all as specified and directed.

S&F MCB SP 6 to 32 Amps, 240 Volts, 50 Hz AC supply suitable for 'C' series, 10 KA breaking capacity, completed all as specified and as directed.

Supply and fixing in replacement of Sub main wiring system with two runs PVC insulated FRLS wire,1100 volt grade with multistranded copper conductor wire of size 2 Run of 10 Sqmm and 1 Run of 10 Sqmm any type any length drawn through in heavy duty ISI mark PVC Casing capping / PVC conduit of suitable size along with its all fittings and connected accessories and duly fixed surface on wall including taking down old unservicable sub main wiring system complete and making good all disturbed surfaces match to the existing surface, complete all as specified and directed. Note: 3 runs of cable and one run of conduit/ casing capping shall be measured and paid as one unit.

Supply , laying and testing of LT cable XLPE insulated screened,PVC bedded galvanized steel strip or wire armoured electric power cable ( heavy duty ) with aluminium conductor 1100 volt grade cross section area of size 35 sqmm 3.5 core including laid in trenches or fixing on poles or passing through pipes complete including taking out of old unserviceable cable any type any size, complete all as specified and directed .

M&L of Locally available river sand filling in trenches below and above / around UG cable for cable protection, in duct under and above the cables including punning around cable complete all as specified and directed. Note - Punned thickness shall only be measured and paid.

Supply & laying old size sub class 'B' bricks laid flat in trenches over the cable with the length of brick perpendicular to the direction of cable length, adjacent/abutting each other, complete all as specified and directed.

Supply and lay GI pipe 40 mm bore medium grade with all fitting laid in trenches/ under road /floor/ pole/ wall for protection of cable including providing clamping arrangment for holding of pipe on pole/wall in proper size of clamps, nut bolt ,and washer etc., complete all as specified.and directed.

Material and labour for earthing, complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (Earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level connecting to the galvanised iron earth lead wire of 4 mm dia by means of bolts, nuts, check nuts and washers of galavanised iron and earth strip protected by provision of GI light grade pipe 20 mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded of stone aggregate and 20 mm bore pipe for watering perforated at bottom placed on top edge of earth plate common salt and charcoal filling with fixing arrangement funnel wire mesh and earth work in hard dense soil returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs and connecting to earth test point, complete all as specified and directed.

M& L for taking down carefully of existing ceiling fan /exhaust fan and geyser any type any capacity and after removing fan blade and including cleaning all dust particles and filling cavities with filler material, oiling ,greasing including applying painting work on any type of fan with blade complete body system by two coat of synthetic enamel paint as per existing type of colour and after painting work assemble the same along with providing of fan hook with all connecting fixing accessories etc and after completion of work hanging and refixing the all fan & geyser on same position with the help of nut bolt and washer etc and making all electrical wire connection, complete all as specified.and directed

Notes :- An amount of Rs.85462.00 on account of Credit Schedule for Schedule 'A' Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum.

GHULAM NABI GILKAR AND CO (BID ID -3492984)

RISING SUN ENGG WORKS (BID ID -3493313)

M/S PARVEZ AHMAD LONE (BID ID -3493598)

M/S AIJAZ ENTERPRISES (BID ID -3493261)

M/S MOHAMAD YOUSUF AKHOON AND SONS (BID ID -3493231)

M/S SK ATLANTIC ENTERPRISES (BID ID -3492878)

M/S TAJ DIN KHARI (BID ID -3492750)