REPAIR/MAINT OF ROAD FURNITURE PATHWAYS, CURBSTONE AND CONNECTED ITEMS UNDER AGE B/R I AT OLD AMRITSAR CANTT UNDER GE ASR

Amount

S&F Delineators DA 952 with plate size of 200x80mm on two sides with reflective signs fixed on MS pipe of 50mm duly powder coated, anti-rust & anti theft steel net. Size- 700x80x200mm complete all as specified and directed. Make: Dark Eye/Sinor/Road Knight

Supply & fixing of double legend informately sign board single as well as double sided fixed on single frame and meeting back to back on the square pipe. (This is double sided board) The boards are of high intensity green /blue or as required colour grade retro-reflective of AVERY DENNISION made out 2mm thick alco bound sheet confirm to IS-736 to be covered with high intensity grade retco-reflective sheeting (AVERY DENNISION) of Green/Blue as per IRC standard. For double sided board two such board made on alco bond sheets are fixed on the single frame of 35x35mm square pipe with back to back this are mounded with POP rivets. Two leg post of square pipe of size 50mm are fixed to the board length of the leg post is 10ft. High intensity reflective sign board made of hardened ACP sheets 2mm thick POP rivters steelness steel rectangular pipe of size 50x25mm frame of size 900x1200mm. Frame supported with bolts over 60mm round 3 meter long stainless steel pipe of 16 guage with stainless steel bonded clamps. All stainless steel sheet parts should be polished. Sign board should be reflective on both side with wide HIP sheet and overlay film of blue/Green colour with computer cut letters, sign and border complete all as specified and directed by Engr -in- Charge. Two boards on single frame are fixed back to back to look as one for Double Side Board. It is installed with PCC 1:2:4 of 400mm x 400mm x 600mm including excavation.

S & F Directional arrow sign board of size 900mmx250mmx600mm made of CRC sheet duly welded to MS frame of size 35mm x35mm square pipe & having hold fast of size 100mm x 100mm. The computer sign board shall be powder coated along with two coats of primer for long life. The sign board shall be fully reflectorised with white high intensity retro reflective sheeting. It is to be installed with PCC 1:2:4 of 300mm x 300mm x 600mm including excavation complete all as specified and directed.

S&F Speed Breaker DA 1001 of size 425 x 75 x 500mm. The body of the speed breker is made of ABS material. Two highly reflective reflectors moulded in PMMA meterial are welded with ABS plate through ultasonic welding process and than fixed on two speed breaker with reflector on both sides including black and yellow colour with all arrangement of fixing complete all as specified and directed.

S&F for Convex mirror 800mm dia made of PC material with suitable MS pipe post duly painted as per site requirement . It should have clear and definite mirror image having 130 degreeof viewing angle at junction of Road or blind turning of suitable size complete all as specified and directed.

M&L for preparing the road surfaces by cleaning of all dirt scales and providing 2.5mm (minimum )thick hot thermoplastic paint (Retro reflective Type) for road marking in white/yellow shade by fully automatic thermoplastic paint applicator machine fitted with profile shoe gun beads dispenser propane tank, heater and profile shoe heater driven by skilled operator on road surfaces . Note :- Road Marking work shall be carried out in accordance with manufacture's instructions complete all as specified and directed.

Taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 using WPC 2% of weight of cement and finishing even and smooth without using extra cement complete all as specified and directed. (WPC measured and paid saperatly)

Supply only integral water proofing compound complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint of shade as approved over a coat of cement primer on wall surfaces complete all as specified and directed.

M&L for preparation of old plastered surfaces and applying one coats of cement base paint of shade as approved complete all as specified and directed.

Dismantaling of brickwork, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed.

M&L for Brick work with sub class "B: bricks straight or curved on plan exc 6 m mean radius in CM 1:4 complete all as specified and directed.

All as per Srl Item No 13 here-in-before but except brick complete all as specified and directed.

M&L for Machine pressed coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and no pigments over and including 25mm thick sand cushioning complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in sub base of floor complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4 finishing even and smooth without using extra cement complete all as specified and directed

M&L preparation of old painted surfaces of steel of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L preparation of old painted surfaces of curb stone of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L preparation of new surface of curb stone of any description over 10cm width or girth not otherwise described and applying two coat of synthetic enamel paint complete all as specified and directed.

M&L preparation of old painted surfaces of steel of any description over 10cm width or girth not otherwise described and applying one coat of aluminium paint complete all as specified and directed.

Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness (below or above ground level) and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas complete all as specified and directed.

M & L for Pre-cast cement concrete type B1( 1:2:4) 20mm graded stone aggregate for kerb stone block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1 : 4 complete all as specified and directed.

Providing precast cement concrete type B-0 (1:2:4 ) (12.5 mm graded aggregates) louvres and jallies, 25mm thick (mea sured solid), including all mouldings but excluding frame (Pre cast frame shall be measured separately and paid for under relevant item)complete all as specified and directed.

Material and labour for precast ce- ment concrete type B1( 1:2:4) 20mm graded stone aggregate in win- dow or door cills, ntels, bressumers, steps,quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces,including chamfers, eatherings,throat- ing etc. and setting in mortar complete with joints to match complete all as specified and directed.

S & F Mild steel round bars 5-6mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

NU DOLPHIN ENTERPRISES

GEE EMM ASSOCIATES

M/s Vijay Construction Co.

UNITED ENGINEERING CORPORATION

kapoor and co