Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance 11 ANUPAM VIHAR ENGINEERS ENCLAVE GMS ROAD DEHRADUN UTTARAKHAND 248001 | DEHRADUN | UTTARAKHAND | 248001 | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Not Admitted-Fee/PreQual/Technical | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
₹5.6 L
EMD Value
₹11,280
Closing Date
31 Mar 2022, 6:00 pmClosed
Executive Engineer
Executive Engineer, Irrigation Division Udhampur
Upgradation of departmental building including construction/renovation of toilets. A) Construction of Bathroom/Toilet and repair/Maintenance of Irrigation Sub Division Ramnagar (UT Capex Budget)
2022_IFC_165299_1
1st Time Fresh e-NIT No. 41 of 2021-22
Open Tender
Civil Works
Item Rate
30 days
udhampur
Please refer tender document
3 documents required · 3 mandatory
₹500
Yes
Executive Engineer, Irrigation Division Udhampur
₹11,280
Yes
7 Apr 2022
25 Mar 2022
1 Apr 2022
25 Mar 2022
31 Mar 2022
25 Mar 2022
Amount
Earthwork I excavation by manual means over areas (exceeding 30 cm and up to 1.5 m in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavatd earth up to 1 m from cutting edge, disposed earth to be leveled and neatly dressed in all kinds of soil
Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of un serviceable material with in 50 mtr lead in cement mortar
Removing mortor from and cleaning stones, and concrete articles (net quantity of stacks of cleaned materials will be measured) in cement mortor
Dismantaling old plaster or skirting, ranking out joints and clearing the surface for plaster includingdisposal of rubbish to the dumping ground within 15 meters lead
Dismantling doors, windows and clerestory windows (Steel or wood) shutter including chowkhats, architrave, holdfasts etc complete and stacking within 50 meter lead
Of area of 03 Sqm and below
Of area beyond 32 sqm
demolishing RCC work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction sof Engineer in Charge
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in-charge 1:3:6 or richer mix
Providing and fixing 1 mm thick M.S sheet door with frame of 40 x 40 x 6 mm angle iron and 3 mm M.S gussest plates at the junctions and corners, all necessary fitting complete. Including applying a priming coat of approved steel rimer, using flats 30 x 6 mm for diagonal braces and central cross piece
Providing and laying in position cement concrete of specified grade inclduing curing but excluding the cost of centering and shuttering. All work upto plinth level with 1:3:6 ( 1 cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size) Crushed
Providing and laying vitrified tiles in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08% and conforming to IS 15622 of approved make, in all colours and shades. In skirting, riser to steps, over 12 mm thick bed of cement mortor 1:3 ( 1 cement: 03 coarse sand), including gruting the joint with white cement and matching pigments etc complete size of the tile 600 x 600 mm
Brick work with common burnt clay, (Non modular) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:6 ( 1 cement 6 coarse sand)
Half brick masonry with common burnt clay (non-modular) bricks of class deisgnation 7.5 in foundation and plinth including curing in cement mortor 1:4 ( 1 cement 4 coarse sand)
Extra for falf brick masonry in superstructure above plinth level upto floor V Level
Reinforceed cement concrete work in beams suspended floors roofs having slope upto 15 degree landings, balconies, shelves, chajjs, lintels, bands, plain window sills, staircases and spiral stair cases upto five level inclduing curing but excluding the cost of centering , shuttering, finishing adn reinforcement with 1: 1 1/2: 3 ( 1 cement 1 1/2 coarse sand 3 graded stoen aggregate 20 mm ominal size)
Steel reinforcement for RCC work including straightening, cutting, bending, placing in position and bindings all complete above plinth level cold twisted bars
Centering and shuttering including strutting propping etc and removal of form work for
Retaining walls, return wallsm walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets etc
Suspended floors, roofs landings, balconies and access platform
Edges of slabs and breaks in floors and walls under 20 cm wide
Random rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 ( 1 cement 6 coarse sand 12 graded stone aggregate 20 mm nominal size upto plinth level and curing complete with Cement mortar 1:6 ( 1 cement 6 coarse sand)
Extra for stone work, randow rubble masonary / coarse rubble masonry/ ashlar masonry above floor V level for every four floors or part thereof
Providing and laying damp proof course 40 mm thick with cement concrete 1:2:4 ( 1 cement 2 coarse sand : 4 graded stoen aggregate 12.5 mm nominal size) Crushed at places
20 mm cement plaster of mix 1:6 ( 1 cement 6 coarse sand)
12 mm cement plaster of mix 1:4 ( 1 cement 4 coarse sand)
Distempering with dry distemper of approved brand and manufacture (two or more coats) and of requried shade on new work, over an dincluding water thinnable priming coat to give an even shade
Finishing walls with water proofing cement paint of required shade on new work (Two or more coats applied @ 3.84Kg/10 sqm)
Finishing with Epoxy paint (Two or more coats) at all locations prepared and applied as per manufacture's specifications inclduing appropriate priming coat. Preparation of surface, etc complete.. On steel work
Providing and fixing white vitreous china pedestal type water closet (European type W.C pan) with seat and lid. 10 liter low level white PVC flushing eastern. Including flush pipe with manually controlled device (Handle lever). Conforming to IS: 7231, with all fittings and fixtures compplete. including cutting adn making good the walls and floors wherever required: WC pan with ISI marked white solid plastic seat and lid
Providing and fixing GI inlet connection for flush pipe connecting with WC Pan
Providing and fixing 08 mm dia CP/SS. Jet with flexible tube upto 1 meter long with S.S triangular plate to European type W.C of quality and make as approved by Engineer-in-charge
Providing and fixing mirror of superior glass (of approved quality) and requried shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing. (Rectangular shape 453 x 357 mm
Providing and fixing mirror of superior glass (or approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thik hard board backing. Recetangular shape 453 x 357 mm
Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the wall etc . Internal work-Exposed on wall. 15 mm dia nominal board (Medium)
Providing and fixing GI pipes complete with GI fittings excluding trenchign and refilling etc (External work)
15 mm dia nominal bore (Medium)
20 mm dia nominal bore (medium)
Providing and fixing wash bsin with CI brackets, 15 mm , CP brass pillar taps, 32 mm CP brass waste of standard pattern including painting of fittings and brackets, cutting and making good the walls wherever required. White vitreous china flat back wash basin size 550 x 400 mm with single 15 mm CP brass pillar tap
Providing and fixing PVC waste pipe for sink or was basin including PVC waste fitting complete 32 mm dia
Providing and fixing 15 mm nominal bore CP brass bib cock of approved quality conforming to IS: 8931
Providing and placing on terrace (at all floors levels) polyethylene water storage tank ISI: 12701 marked, with cover and suitalb elocking arrangement and making necessary holes for inlet, outlet and over flow holes for inlet, outlet and over flow pipes , but without fittings and the base support for tank
Supply assembling, evection, testing and commissioning of gravity pump including top cover for the gravity pump/ mortor 1/2 hp (0.5HP) (Mono block pump self priming type)
Providing and fixing gun metal gate valve of approved quality (ISI marked)
15 mm dia
20 mm dia
Providing and fixing of foot valve (PVC of approved quality)
Providing, laying and fixing PVC Pipes 100 mmdia ISI marked for waste water and carriage waste from WC including encasing with cement concrete ( 1:4:8) mix with stone aggregates of 20 mm nominal size.
Providing and fixing PVC bends of 87.5 Degree - 110 mm dia ISI marked for PVC waste pipes etc
Carriage of Nallah stones from source upto site of work AV 04 Km by MT and 200 mtr by Head Load
Carriage of Sand from source upto site of work AV 72 Km by MT
Carriage of Stones aggregate from source upto site of work aV 04 Km by MT
ASHOK KUMAR
Akhilesh Bansotra Govt Contractor
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .