Recarpeting of road from Kali mandir level crossing to nandira level crossing under Bharatpur Area.

Amount

Prime coat Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means as per clause 502 of specifications.

Bituminous Macadam Providing and laying bituminous macadam using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction and as per clause 504 of specifications. Using Batch Mix Plant of appropriate capacity and Paver finisher.for Grading II (19 mm nominal size) bitumen content 3.4%

Providing, laying and rolling of 20mm thick Mix Seal Srufacing Type -A composed of crusher broken hard granite stone chips of sizes 11.2mm to 0.09 mm @ 0.27 cum and specified grade bitumen (VG-30) @ 22 Kg per 10 sqm of road surface laid to the required line, grade and level to serve as wearing course on a previously prepared base, including mixing in hot mix plant, laying by paver finisher and rolling with smooth wheeled roller 8-10 tonne capacity as per MoRT&H specifications clause 512 in all respects.

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes all complete as per clause 803 of specifications.

Road Markers/Road Stud with Lense Reflector (Providing and fixing of road stud 100x 100 mm, die cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling hole 30 mm upto a depth of 60 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS 873 part 4:1973)

Total impact of GST plus Labour Cess [@ 1 % (BOCW Cess to be deducted from the RA bill as per the value of the work progress)] for the purpose of CTC

PRATAP KUMAR PANI (BID ID -1099774)

SOUMYA RANJAN PRADHAN (BID ID -1096693)

M/S SUBHRANSU SOBHAN PATTANAIK (BID ID -1099792)

SUNACHANDA NANDA (BID ID -1100102)