Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹78.0 LAccepted-AOC | L1 | Accepted-AOC This bid is accepted for the bid value which is less than the contract value. | |
| 2 | L2₹82.9 L+₹1.2 L (1.44%)Rejected-AOC | L2 | Rejected-AOC Bidder Quoted Higher Value Than L1 | |
| 3 | L3₹84.4 L+₹2.7 L (3.35%)Rejected-AOC SOUTH THOTTAM PALAKKANTHU PO DINDIGUL WEST TALUK DINDIGUL 624 019 TAMIL NADU | 624019 | L3 | Rejected-AOC Bidder Quoted Higher Value Than L1 |
Tender Value
Refer Docs
EMD Value
₹50,000
Closing Date
8 Oct 2024, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SE,WRD,LVBC,Sivagangai
O/o the Superintending Engineer, WRD, Lower Vaigai Basin Circle, Sivagangai-630562
Providing distribution arrangements in thiruppuvanam tank 4th sluice to supply of water to kaliyandur channel, nainarpettai channel and other three channels as per direction of Honorable high court of in W.P.MD.no.1352 of 2016 and W.P.M.D no.10646
2024_WRD_485143_1
01LVB202425
Open Tender
Civil Works - Water Works
Lump-sum
150 days
Thiruppuvanam
please refer tender documents
8 documents required · 8 mandatory
₹0
₹50,000
Yes
4 Nov 2024
19 Sept 2024
9 Oct 2024
19 Sept 2024
8 Oct 2024
19 Sept 2024
Amount
Earth work excavating and depositing on bank with initial lead of 10m and initial lift of 2m in hard stiff clay, stiff black cotton, hard red earth shales murrams, gravel, stoney earth and earth mixed with small size boulders etc., complete complying with standard specification and as directed by the departmental officers.
Collection and Supply of Sand gravel mix 1:1 (one sand and one gravel) ratio for basement / filter zone including stacking, mixing and spreading the sand gravel mix in layers of not exceeding in 150 mm thickness over properly prepared surface, watering and consolidating the same with approved type of compaction equipment etc complete complying with the standard specification and as directed by the Engineer in charge of the work.
Providing and placing in position of Plain Cement concrete of M-15 using broken hard granite coarse aggregate of nominal maximum size of 40mm to IS specified grading and using crushed stone sand (m-sand) ( to achieve the specified characteristic strength of 15 N/mm² in 28 days ) and mixing the incredients in approved mixer including dewatering of the placement site by bailing/pumping and diverting wherever necessary placing in layers and watering, curing, finishing the surface with all leads and lifts etc., complete in all respects so as to attain the profile and strength as specified in the approved drawings and specification etc., complete complying with standard specifications and as directed by the Engineer incharge of work. (Without vibration)
Supplying and erecting water tight steel centering to sides and soffits including necessary supports and strutting upto 3.29m height for plain surfaces such as vertical slabs side slab of concrete works with all cross bracing using MS sheets of suitable size 10 gauge sheets of size 90cm x 60cm stiffened with welded MS angle of size 25mm x 25mm x 3mm for boarding laid over silver oak (country wood) joists of size 75cm x 5cm spaced at 45cm c/c and supported by casurina props 10 - 13 cm dia spaced at 75cm c/c for vertical plain concrete etc., complete complying with standard specification and as direced by the Engineer in charge of work. (The retrieved materials should be taken back by the contractor.) The payment for centering shall be given after the concrete is laid.
providing and plaqcing in position of plain Cement concrete M15 grade design Mix with and the nominal maximum size of coarse aggregate of 20 mm weigh batching the ingredients and mixing in approved mixers/ batching plant (to produce concrete of the specified characteristic strength of 15N/mm2 at 28days) including dewatering the placement site by bailing/ pumping and by diverting wherever necessary laying the concrete in layers and in bays with all leads and lifts compacting and finishing the surface, water curing so as to attain the profile and strength specified in the approved drawing and specification complete complying with standard specification and as directed by the Engineer in charge of the work. (without Vibration)
Providing and placing in position of plain Cement concrete of grade M15 design Mix with nominal maximum size of coarse aggregate of graded mix using 40% quantity of 20mm size hard broken granite stone jelly and 60% quantity of 40mm I.S. specified grading mixing in mixer machine (to produce concrete of the specified characteristic strength of 15N/mm2 at 28 days) including dewatering the placement site laying, compacting and vibrating, finishing the surface with all leads and lifts watering, curing ,etc, complete complying with standard specification and as directed by the Engineer in charge of the work.
Supplying, fabricating and placing in position of mild steel or ribbed tor steel grills for reinforcement of RCC works including cost of steel and binding wire, labour charges for de-coiling, cutting, bending and tying the grills complete complying with standard Specification and as directed by the Engineer in charge of the work.
Supplying,hoisting,laying,jointing and fixing in position of RCC Hume pipe of NP3 class of 900mm dia with suitable collars including labour and jointing materials etc., complete complying with standard specification and as directed by the departmental officers
Providing composite paddle shutters with shutters of various size is made of composite material as per the following specification. the skin plate shall be made out of 6mm composite panel the composite horizontal stiffeners on the rear side shall be made of 35x40x5mm channel. The vertical stiffeners shall be made of 35x40x5 mm angle lifting handle in mild steel rod 20mm dia & length 200mm shall be impregnated at the top of the shutter on either sides. Twi 12mm holes shall be suitably drilled in the handle to accommodate MS bolts & nuts and connect to the shutter. The composite paddle shutter shall be given a corrosion resistance & UV barrier coating. The composite 1Sq shutter has good mechanical properties, ease in handling and excellent corrosion resistance property. Then the shutter shall be loaded, transported to the site, unloaded & erected as directed by the departmental officers. The cost includes cost of all materials, pattern and mould cost, process charges cost of consumables, process charges, labour charges for dismantling, loading, lifting, unloading transport erection, hire charges for equipment like grinding machine conveyance to site and clearing them after completion of work, including cost of trial operation, etc. complete as directed by the departmental officers.
Earth work in all kinds of soils except hard rocr requiring blasting deploying earth moving machinery for desilting channel and forming bund on either side and depositing the earth on banks including jungle clearance,etc., complete as desired by the Engineer in charge.
having width upto 3.00m
having width 3.00 to 10.00m
GST 18 % in figures
R. DURAIAN CONTRACTOR (BID ID -1159070)
P S STALIN CONTRACTOR (BID ID -1159081)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .