SPECIAL REPAIRS TO BLDG NO A160 A220 A221 20 DUS OF 58 GTC UNDER GE SHILLONG

Amount

M&L Glazed ceramic colour tiles of size450 x 350 x 7mm thick in vertical wall etc set and jointed with neat cement slurry and pointed in white or colour cement to match with the colour of tile over and including 10 mm thick backing in cement sand mortar 1:4 including dismantling old tiles including cement mortar bedding and removing rubbish off the premisess complete as specified and directed.

M&L Non-skid ceramic colour tiles 7 to 8 mm thick , (square/rectangular), area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over over and including 10 mm thick backing in cement sand mortar 1:4 including dismantling old tiles including cement mortar bedding and removing rubbish off the premisess complete as specified and directed.

M&L Non-skid ceramic colour tiles 7 to 8 mm thick , (square/rectangular), area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in skirting /dado loors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:4 including dismantling old tiles including cement mortar bedding and removing rubbish off the premisess complete as specified and directed.

M&L for Granite (of any type) tiles 18- 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including griding and polishing including dismantling old one complete all all as directed.

M&L for Machine cut kota stone slab 18 to 20 mm thick as in flooring over and including 20 mm thick screed bed in cement sand mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and as directed.

M&L for Machine cut kota stone slab 18 to 20 mm thick as in riser of steps, skirting, dado and pillar over and including 10 mm thick screed bed in cement sand mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and as directed. Note: For staircase treads, single piece slab to full length and width of treads shall be provided and the nosing shall be rounded off and two parellel grouves of (10mm x10 mm ) immidiately behind the nosing edge shall be provided without any extra cost.

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwsincluding dismantling of old one any type complete all as specified and directed.

S & F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwsincluding dismantling of old one any type complete all as specified and directed.

Taking down chowkats or frame with shutter (without taking off shutter from the frame) not exc 1.5 sqm each complete all as specified and directed.

Taking down Shutter of any description n exc 1 sqm each complete all as specified and directed.

Taking down Shutter of any description exc 1 sqm m and n exc 2 sqm each complete all as specified and directed.

Taking down cement plaster on brick or concrete walls, etc including raking out joints, hacking for key, scrubbing down with water etc.conc block wall and removing of debries complete all as specified and directed.

Dismantling of boarding, any description, fixed in any position with nail complete all as specified and directed.

Demolition of reinforced cement concerete of any description and in any position not otherwise specified providedfor including removal of debries complete all as specified and directed.

Demolition of (unreinforced) cement concerete in ground floors and paving not exc 15cm thickness (below or above GL) and removing of debries complete all as specified and directed.

Taking up and down 15 mm bore GI tubing and connections including remove to site complete all as specified and directed.

Taking up and down 20 mm bore GI tubing and connections including remove to site complete all as specified and directed.

M&L for water proofing treatment to RCC roof slab, including parapet comprising with the following courses of treatment/specification from bottom to top:- (i) Taking out old roof treatment and roughening the same old concrete slab by picking, sweeping clean and washing down with water to remove dust etc. (ii) Screed bed or bedding layer of mortar 15 mm thick in CM 1:4 for laying as in roof slab with mixing of WPC and surface finished fare and smooth without using extra cement. (Note: WPC shall be measured and paid for under separate items) (iii) Cleaning of plastered roof surface and applying one coat of cold bituminous primer @ 0.25ltr /Sqm conforming to IS:3384-1986. (iv) APP based polymeric membrane 3mm thick (minimum), weighing 3.5 Kg/sqm reinforced with polyester non woven fabric (weighing not less than 150 gms/Sqm) shall be less applied over bituminous primer as specified above over a Application of polymeric membrance shall by torch application. The overlaps shall be minimum 100mm on the transverse direction and 75mm on longitudinal direction. (v) Applying one coat of aluminum paint over the APP modified membrance @ 0.11Kg/sqm.

M&L rendering 5 mm thick on fair faces of brick work or concrete surface over 10 mm thick in CM 1:4 using water proofing compound @ 2% by weight or cement as per manufacture instruction and finishing even and smooth without using extra cement all as specified. Note: WPC shall be measured and paid for under separate item.

M&L rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finishing even and smooth without using extra cement.

Supply of Integral WaterProofing Compound ISI Marked (Note: WPC shall be measured and paid for under separate items).

M&L rendering 5 mm thick in ceilings in CM 1:3 finishing even and smooth without using extra cement.

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of suitable primer over wall care putty (minimum 1 mm thick) to achive smooth surface complete all as specified and directed..

M&L for complete removal of existing wall surface and applying two coats of oil bound distemper over a coat of suitable primer over wall care putty (minimum 1 mm thick) to achive smooth surface complete all as specified and directed.

M&L for new plastered surfaces of wall, any description, washing rubbing down and applying two coats exterior acrylic emulsion paint ( 1st quality of exterior grade) over a coat of suitable exterior primer as per manufacturer instruction complete all as specified and directed.

M&L for Complete removal of existing treatment of plastered surfaces of wall, any description, washing rubbing down and applying two coats exterior acrylic emulsion paint ( 1st quality of exterior grade) over a coat of suitable exterior primer as per manufacturer instruction complete all as specified and directed.

M& L 2nd class hard wood clean sawn, plain 20mm thick or weather edged 15mm to 20mm thick & fixed with 30mm lap all as specified & directed.

M&L for 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with nails as in ceiling including dismantling of old ceiling board with fillet complete all as specified and directed.

M&L preparation of new plastered surfaces and applying three coat of white wash on ceilings complete all as specified and directed.

M&L preparation of old plaster surfaces and applying two coat of white wash on ceilings complete all as specified and directed.

M&L for plain fillets, square, rectangle or triangle in setion clean sawn secused with nails in seond class hard wood exceeding 06 sqcm and not exc 13 sqcm complete all as specified and directed.

M&L for Two coats synthetic enamel paint over a coat of pink wood primer on wood surfaces of any description not exc 10 cm including preparation of old or previously untreated surface complete all as specified and directed.

M&L for One coats synthetic enamel paint on old painted wood surfaces of any description not exc 10 cm including preparation of old painted wood surfaces complete all as specified and directed.

S&F 2nd class hardwood plain, solid, straight chowkats or frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F 30mm thick 2nd class hardwood, glazed and skeleton shutters, open rebated and prepared to received glass, guaze etc (without sash bars) edge of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc.chamfered or rounded mitred and rebated sash bair any numbers edges of framing plain chamfered or rounded fitted with cut and mittered beads for sceuring glass guage etc. size of members as specified in SSR pt-I section 8 clause 8.24(b) supplied & fitted to chowkhats.

S&F 35mm thick 2nd class hardwood, glazed and skeleton shutters, open rebated and prepared to received glass, guaze etc (without sash bars) edge of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc.chamfered or rounded mitred and rebated sash bair any numbers edges of framing plain chamfered or rounded fitted with cut and mittered beads for sceuring glass guage etc. size of members as specified in SSR pt-I section 8 clause 8.24(a) supplied & fitted to chowkhats.

S&F 35 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides conforming to IS 2202 (Part-1), 1983 fixed to chowkhats all as specified and directed.

M&L for two coats synthetic enamel paint over a coat of pink wood primer on wood surfaces of any description not otherwise described over 10 cm including preparation of new or previously untreated surface complete all as specified and directed.

M&L for two coats synthetic enamel paint over old painted wood surfaces of any description not otherwise described over 10 cm including preparation of old painted wood surfaces.

S&F 3 mm thick sheet glass, ordinary quality and glazing with beading or oil putty in square n.exc 0.5 Sqm in each pane including fixed with wooden beads/glazing pins or spring clips in wooden or metal frames complete all as specified and as directed.

S&F Frosted glass 3 mm thick, glazing with beading or oil putty in square n.exc 0.5 Sqm in each pane including fixed with wooden beads/glazing pins or spring clips in wooden or metal frames complete all as specified and as directed.

Hacking out old glass(any thickness,size,quality or description) from wooden frams ,glazed with putty or fixed with beads.

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty or with beading in square n.exc. 0.5 sqm in each pane.

S&F for galvanized mild steel wire cloth, 0.56mm nominal dia of wrie and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanized wire staples complete all as specified and directed.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain co lour PVC sheet reinforced with M.S square tube, fixed in opening as per specification & drawing shown in section 8 of SSR Part II complete all as specified & directed.

S&F 30 mm thick factory made solid panel PVC door shutters consisting of frame made out of M.S tubes for top & bottom rails M.S frame shutters shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet trip of 20mm width stuck inside with solvent cement for stiles and plain co lour PVC sheet for top lock rail and bottom rail on either side and as gap insert for top rail with suitable and bottom rails .Paneling of plain co lour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles and rails with suitable PVC sheets beading and jointed together with solvent cement and fixing in the frame at site as per specification & drawing shown in section 8 of SSR Part II.

S&F 100mm long butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S&F 75mm long butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S&F 200mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S & F 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 125 mm long aluminium handle, fabricated type, anodised complete all as specified and directed.

Supply and fix for 15 mm bore GI tubing medioum grade with all fittings fixed to walls or laid in floors (concealed type) complete all as specified and directed. Note : Quoted rate shall be inclusive for necessary chasing and cutting and making good .

Supply and fix 20 mm bore GI tubing medioum grade with all fittings fixed to walls or laid in floors complete all as specified and directed. Note : Quoted rate shall be inclusive for necessary chasing and cutting and making good .

Supply and fix, as in repair, 15 mm bore pillar tap, cast copper alloy, with capstan heads,chromium plated , screwed down high pressure ,with or without lettered 'hot' or 'cold' with long shanks and fly-nuts, screwed for iron pipe and fixed all as specified and directed.

Supply and fix as in repair Vitreous china WHB 550x400mm size white flat back with brackets incl cutting or pinning ends of brackets incl provision of 32 mm waste coupling waste pipes,

Supply and fix, as in repair, 15 mm bore bib taps, cast copper alloy, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and directed.

Supply and fix, as in repair 15 mm bore stop valves best copper alloy screwed down high pressured with batter.fly nuts handle screwed bolts ends for iron pipes or for unions and fixed complete all as specified and directed.

Supply and fix, as in repair 15 mm bore gate valves best copper alloy screwed down high pressured with batter.fly nuts handle screwed bolts ends for iron pipes fancy type choromium plate complete all as specified and directed.

Supply and fix, as in repair 20 mm bore gate valves best copper alloy screwed down high pressured with batter.fly nuts handle screwed bolts ends for iron pipes fancy type choromium plate complete all as specified and directed.

Supply and fix brass chromiom plate tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

Supply and fix, PVC (SWR) pipes 110mm bore single socketed , in any length with rubber ring joints , laid in trenches or in floors all as specified and directed complete all as specified and directed.

Supply and fix PVC (SWR ) bend 110mm bore complete all as specified and directed.

Supply and fix, vent cowel(SWR) 110mm bore complete all as specified and directed.

Supply and fix,as in repair PVC 10 Ltrs capacity valve less syphonic action type flushing cistern, low level white with inlet ball, valve, float and handle including bracket , flush pipe of polyethylene of low or high density or PVC pipe 32mm dia for low level cistern complete all as specified & directed.

Supply and fix, as in repair PVC connection 15mm dia sizes with PTMT nuts of length 300 mm complete all as specified & directed.Make : Prayag/Polutuf

M&L for shower arm 15mm size,195mm long with bend of 45 degree with flange of PTMT any colour (Minimum weight 40gms) complete all as specified & directed Make : Prayag/Polutuf

S&F in repair for Grating doom 100 mm dia of PTMT (minimum weight 25gms) complete all as specified and directed. Make : Prayag/Polutuf

Supply and fix,as in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete.

Supply and fix, as in repair 500Ltr Rotational moulded polythylene water storage tanks (cylindrical vertical with closed top hoisted and fixed in position including fixing of float ball) including all as specified in SSR part I complete all as specified & directed.

Supply and fix,as in repair for kitchen sinks with drainage board made of stainless steel kitchen or laboratory with plugs, washers ,waste coupling 32mm dia and waste pipe, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160mm complete all as specified and directed. Make : Nirali/Prayag/Bluestar

M&L for 100mm thick PCC(1:2:4), type B-2, using 40 mm graded aggregate and finished the surface fair and even without using extra cement as in path,hardstanding and its similar works all as specified and directed.

M&L for PCC 1:3:6 type C2 (using 40 mm graded aggregate) as in plinth protection 75mm thickness, finished even and smooth using extra cement including 10mm wide and 30mm deep joints at every 2.4mtrs interval filled with mastic compound etc complete all as specified and as directed by Engr-in-Charge.

M&L for PCC(1:3:6), type C-2, using 40 mm graded aggregate in surface channel and drain including nasessary form work.

M&L Extra for forming fair finished drain or channel upto 30 cm inner girth in cement concrete, using extra cement including forms, mould, mitred stop ends etc all as directed.

M&L for TMT bar 10 mm dia and over cut to length, bent to shape reqd, incl cranking, bending, spirally for hooping, hooking ends and binding with 0.90 mm dia MS wire (annealed)

M&L for reinforcement cement concrete 1:1.5:3 typeA1 using 20 mm graded aggregate as in slab supported on walls, beams and column in floors, roofs etc all as specified and directed.

Use and waste for form work to soffits of suspended slabs such as roof slabs, floor slabs and similar work etc, rough finished curved surface of concrete .

Supply and fix Harrison rails,(minimum 20 mm dia) mild steel, chromium plated with fixing brackets stops, rollers etc all as specified and directed.

S&F in repair Health Faucet (ABS) with 120cm PVC flexible tube & ABS wall hook all as specified and directed. Make : Prayag/Hindware/Parryware

Forming jambs etc to openings CM 1:6 (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete all as specified and directed

Taking down carefully old unserviciable copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, sunken type box etc. and removing materials to store for keeping in safe custody for reuse at site or for taking credit and making good to disturbed surfaces of walls, floors etc with its original specification complete all as specified and directed by Engr-in-Charge.

M&L for point wiring for modular fittings with 1.5 Sqmm (nominal area) PVC insulated1100 volts grade, multistranded, copper conductor, single core, unsheathed cables (FRLSH quality) drawn through and including PVC conduits of suitable size but not less than 20 mm dia (medium grade) with all fittings and accessories including suitable PVC modular box or pressed steel modular boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint both internally and externally including cover plate with frame concealed in walls/ceiling etc and including cutting chases for conduits and sinking for boxes and making good to disturbed surfaces, including PVC insulated and unsheathed, single core, multi-stranded, copper conductor cable of size 1.5 Sqmm green in colour as earth continuity conductor connected to common earth and earth dolly for one light point/fan point/bell point controlled by one 5 Amps one way switch complete as specified and directed. Note : Quoted rate shall be inclusive for necessary chasing and cutting and making good .

All as per item No 84 above but for one 3 pin socket outlet 5 Amps on same board alongwith other suitable switches.

All as per item No 84 above but for one 3 pin socket outlet 5 Amps on independent board alongwith other suitable switches.

All as per Srl item No.84 here in before but for one light point controlled by two way switch/fan regulators.

All as per item No 84. above but with 4.00 sqmm cable for 3/5 pin 15 Amps switch socket outlet (Power point) with PVC unsheathed single core multi- stranded copper cable of size 4.00 sqmm green in colour as earth continuity conductor in independent board complete all as specified.

Supply and fixing of modular switch one way 6 amps 1 module 230/250 Volts complete all as specified/directed. Make: Legrand/L&T/Schneider

Supply and fixing of modular switch two way 6 amps 1 module 230/250Volts complete all as specified/directed. Make: Legrand/L&T/Schneider

Supply and fixing of modular socket outlet 2/3 pin 6 Amps 230/250 volts 2 module complete all as specified/ directed.Make: Legrand/L&T/Schneider

Supply and fixing of modular switch one way 16 amps 1 module 230/250 Volts complete all as specified/directed. Make: Legrand/L&T/Schneider

Supply and fixing of modular socket 6/16 Amps, 230/250 volts, 2/3 pin combined, 2 module complete all as specified and directed.Make: Legrand/L&T/Schneider

Supply and fixing modular bell push 1 way 6 A module 230/250 volt , AC supply, complete all as specified and directed. .Make: Legrand/L&T/Schneider

Supply and fixing call bell ding dong, AC, 230 V, Single pole all as specified and directed. Make- Havells/Legrand.

Supply and fixing ceiling rose, 3 terminal PVC/polycarbonate, isolated body complete all as specified and directed. Make : Anchor/SSK/Havells

Supply and fixing LED batten fittings 1 x 18/20 Watt complete pre wired fixed to wall with 2 nos PVC block of suitable size make Havells Cat no LHEXACP7PN1W018 or PHLIPS Model no DX18 UJJWAL or Crompton Greaves cat no LCTL20CDL

S & F wall mounted LED batten fittings with all accessories 1X 10 Watt LED, extruded polycarbonate, integrated electronic driver and fixed to wall with 2 Nos PVC block suitable size complete all as specified and as directed. Make - Havells Cat no LHEXACP7IN1W010 or Crompton cat no LCTL 10 CDL or equivalent in Philips

S&F lamp holder, insulated body, with back plate for batten fitting including 7 watt LED lamp 625lm, B22 complete. Make of holder- Havells/anchor/Legrand, Make of LED: Phillips/Bajaj/Havells

M & L for Sub main wiring with two run single core 6 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia concealed on wall/ceiling in PVC conduit, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 6 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion including taking down old wiring etc complete all as directed. Note: (i) Two runs of 6 sqmm and one run of 6 sqmm cable and one run of PVC conduit shall be measured as one RM. (ii) Cutting of chases in the wall of appropriate size shall be carried out with electric cutter machine . (iii) Necessary plastering in the disturbed surface of wall and distempering /white washing to match the existing colour shall be included in the unit rate quoted.

Supply and fixing static energy meter of accuracy class 1.00 AC Single phase,240 v , 50 Hz with backlit LCD display of rating 5-30A with box (measure and dispaly KWH, V, Current, KW, power factor last month history, MD in KW) with special future like TOD, temper logging, optical communication, port display in absence of power with transparent hinge type box made out of MS sheet not less than 1.00 mm thick of suitable size fixed on wooden board complete all as specified and directed . Make: HPL/L&T/Secure

Supply and fixing Distribution board SPN , 240 volts single pole and neutral ,double door, sheet steel enclosure powder coated with 200 Amps rated busbar with neutral link, 12 ways , fixed on wall duly grouted on wooden board with electrical connection complete all as specified and directed including taking down old one. Make: Havells Cat part No DHDPSHODRW08 or equivalent in Schnieder/GE.

Supply and fix RCBO 30mA-32 Amps double pole complete all as specified and directed by Engr-in Charge. Make: Havells /Schnieder/ABB/L&T

Supply and fix MCB, SP, 240 Volt, 40 Amps, 10 kA rupturing capacity 'C' series, AC complete all as specified and directed by Engr-in Charge. Make: Havells Cat Part No:DHMCCSPF040 or equivalent in Schnieder/ABB.

Supply and fix building light LED 25 watt including connection with three core cable 1.5 sqmm complete all as specified and directed by Engr-in Charge. Make: Havells Cat Part No: ENDURACITYLITE25W or Bajaj cat No BRLEP25 LED WH or equivalent in Philips.

Supply and fix MCB, SP, 240 Volt, 6-32 Amps, 10 kA rupturing capacity 'C' series, AC complete all as specified and directed by Engr-in Charge. Make: Havells Cat Part No:DHMCCSPF006-32 or equivalent in Schnieder/ABB.

Supply and fix in repairs MCCB Distribution board, VTP&N , loadline , double door, ,sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link,415 Volts 4 way fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed. Make: Havells Cat part No DHDLVDRWGOFO04 or equivalent in Legrand/Schnieder/GE/C&S.

Supply and fix as in repairs MCCB four pole , 415 Volt,63 Amps,16 KA , fixed thermal & magnetic setting complete all as specified and directed .Make:- Make: Havells Cat Part No: IHLGNF0063, or L&T Cat No CM9793300H2 or equivalent model from Make:- Siemens / Schneider / Legrand .

Supply & fixing blank plate fixed on MCB's DB where applicable complete all as specified & directed by Engr -in-Charge.

S & F in repairs exhaust fan 230 volts , 250mm,plastic body Ventilator DX including making all electric connection complete all as specified and as directed including cutting of hole on wall and makng good disturbed surface of wall and outer wooden box for fan fix on wall Make Orient/Bajaj/Havell's/CG Note:- Old unserviceable exhaust fan obtained after taking down shall be deposited to MES store..

Material and labour for Earthing complete with galvanized steel earth plate 60cmx60cmx6mm thick electrode, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to GI earth lead wire of 4 mm dia upto 7.50m up to test point by means of nuts, bolts, check nuts and washers, GI pipe 15mm bore light grade for cable protection, excavation and earth work, PCC 1:3:6 type C-1 pit, 20mm dia GI pipe medium grade, watering pipe and 15mm bore GI pipe, light grade for protection of earth wire, MS angle iron frame 40x40x3mm, 40mm thick RCC 1:2:4 type B-1 cover reinforced with 6mm dia MS bars @ 75mm C/C both ways and with MS handle made out of 12mm dia bars, PGI Funnel, wire mesh, charcoal and common salt in alternate layer of 15cm complete etc all as shown in electrical Plate No. 03 of SSR Part-I (2009) and connected to earthing test point including testing on completion and taking down old one complete all as specified and as directed.

Excavation in trenches not exceeding 1.5mtr. in depth and not exceeding 1.5mtr in width and getting out in hard/dense soil for laying of cable etc

Returning, filling in trenches, spreading ,levelling, watering and well ramming in layers not exceeding 25cm thick.

Removing excavated material/ surplus soil and depositing where directed at a distance not exceeding 50mtr.at a level not exceeding 1.5 mtr from starting point.

Supply lay and spread in trenches , river sand ,clean ,including spreading ,levelling ,punning for laying /cushioning of cables all as specified and as directed.

Supply and lay in trenches fly ash bricks, old size sub class “B” for cable protection all as specified and as directed.

Supply and lay in trenches, floors ,fix on wall/pole, passing through pipes etc.,LT UG cable ,1100 volts grade, PVC/ XLPE insulated , with multistranded aluminium conductors, armoured with galvanised steel wire or tape ,gland, lugs etc, of 25 Sqmm 4 core , confirming to IS specifications including taking down old one.

Supply and lay in trenches, floors ,fix on wall/pole, passing through pipes etc.,LT UG cable ,1100 volts grade, PVC/ XLPE insulated , with multistranded aluminium conductors, armoured with galvanised steel wire or tape ,gland, lugs etc, of 70 Sqmm 3.5 core , confirming to IS specifications including taking down old one.

Supply and fix on pole / wall or lay in trenches under road / drain crossings etc., for drawing cables, GI pipe light grade 40 bore dia,including necessary fittings ,clamps, bolts , nuts etc. all as specified and as directed.

Dismantling and taking down ACSR conductor complete all as specified and directed

Material and labour for Earthing complete with galvanized steel earth plate 60cmx60cmx6mm thick electrode, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to GI earth strip of 32 x 6 mm upto 7.50m up to test point by means of nuts, bolts, check nuts and washers, GI pipe 40 mm bore light grade for cable protection, excavation and earth work, PCC 1:3:6 type C-1 pit, 20mm dia GI pipe medium grade, watering pipe and 15mm bore GI pipe, light grade for protection of earth wire, MS angle iron frame 40x40x3mm, 40mm thick RCC 1:2:4 type B-1 cover reinforced with 6mm dia MS bars @ 75mm C/C both ways and with MS handle made out of 12mm dia bars, PGI Funnel, wire mesh, charcoal and common salt in alternate layer of 15cm complete etc all as shown in electrical Plate No. 03 of SSR Part-I (2009) and connected to earthing test point including testing on completion complete all as specified and as directed.

M/s SS Engineering

M/s J. C. CONSTRUCTION

M/S Nakul Chandra Samal