Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.3 LAccepted-AOC 37 222 BUNDU KATRA AGRA UP | AGRA | UP | L1 | Accepted-AOC Accepted | |
| 2 | L2₹27.7 L+₹51,274 (1.89%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹27.9 L+₹69,565 (2.56%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹34.5 L+₹7.3 L (26.9%)Rejected-Finance 72 USMAN ENCAVE SECTOR O ALIGANJ LUCKNOW 226004 UP | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226004 | L4 | Rejected-Finance Other than lowest |
| Sl No | Description | Qty | Unit | Unnati Engineers L4 | M/S MAMTA CONSTRUCTIONS L2 | PD GUPTA AND COMPANY L1 | Rajesh Mishra L3 |
|---|---|---|---|---|---|---|---|
| 1.00 | Cleaning of Shallow wells at Gundrai by cutting the MS sheet of 10mm thick by gas cutter in rectanglur shape approx 10 to 12 RM, welding the MS sheet of 10 mm thick by gas welding with the help of copper rod in rectangular shape approx 10 to 12 RM after completing cleaning work, Lowering the non clog pump set of 5 HP to 40HP capacity in shallow wells and running until well gets empty during the cleaning work is on including transportation expenditure, pipe arrangement etc., Making angle iron fabrication work at site over both shallow wells to rest/fixing chain pully set to draw bucket filled with mud, sludge, dust, fungus, useless stone pieces continuously till all the waste material removed from bottom of shallow well, Cleaning all pores/ Sources of water yield inside well's wall by brooming, brushing, rubbing, clothing until all rubbish material removed from well's wall and cleaning the wall with the help of water jet of sufficient pressure including cleaning of wall by disinfection chemical like bleaching powder properly complete all as specified. | 3 | Each Job | 12,000 ₹36,000 | 11,000 ₹33,000 | 10,000 ₹30,000 | 9,500 ₹28,500 Lowest |
| 2.00 | Cleaning of RCC overhead reservoir of 75,000 GLN capacity of 18 Mtr staging including draining out water. Removing, Mud, Slit/dust from Tank. Washing & rubbing with gunny bags & cleaning with fresh water & Bleaching powder including writing the date of cleaning etc by synthetic enamal paint complete all as specified.
(a) All necessary ladder and scaffolding arrangement shall be made by the contractor.
(b) All kind of safety equipments shall be arranged at site by the contractor.
(c) In case of damage of any outlet pipeline/control valves during operation shall be borne by the contractor
(d) Disturbed portion if any shall be made good as per existing by the contractor | 1 | Each Job | 11,000 ₹11,000 | 7,500 ₹7,500 | 8,500 ₹8,500 | 5,000 ₹5,000 Lowest |
| 3.00 | Cleaning of Masonry /RCC under ground sump of 25000 GLN capacity, Located at Gundrai pump house No 1, including the following works:
(i) draining out water with the help of monoblock pumpset (pumpset shall be managed by the contractor)
(ii) Removing, Mud, Slit/dust from sump by manually & rubbing &
cleaning with gunny bags etc
(iii) washing with fresh water & Bleaching powder twon times
(iv) writing the date of cleaning etc by synthetic enamel paint | 1 | Each Job | 7,500 ₹7,500 | 7,000 ₹7,000 | 8,000 ₹8,000 | 5,000 ₹5,000 Lowest |
| 4.00 | Cleaning of Masonry /RCC under ground sump of 25000 LTR capacity loacted at Cadets hostel area including the following works:
(i) draining out water with the help of monoblock pumpset (pumpset shall be managed by the contractor)
(ii) Removing, Mud, Slit/dust from sump by manually & rubbing &
cleaning with gunny bags etc
(iii) washing with fresh water & Bleaching powder twon times
(iv) writing the date of cleaning etc by synthetic enamel paint | 7 | Each Job | 5,000 ₹35,000 | 4,500 ₹31,500 | 5,000 ₹35,000 | 1,000 ₹7,000 Lowest |
| 5.00 | Cleaning of Masonry /RCC under ground sump of 50000 GLN capacity loacted at Kesarbagh Sump House area including the following works:
(i) draining out water with the help of monoblock pumpset (pumpset shall be managed by the contractor)
(ii) Removing, Mud, Slit/dust from sump by manually & rubbing &
cleaning with gunny bags etc
(iii) washing with fresh water & Bleaching powder two times
(iv) writing the date of cleaning etc by synthetic enamel paint | 1 | Each Job | 10,000 ₹10,000 | 8,500 ₹8,500 | 10,000 ₹10,000 | 5,000 ₹5,000 Lowest |
| 6.00 | Cleaning of Masonry /RCC under ground sump of 50000 Liters capacity loacted at view point old campus area including the following works:
(i) draining out water with the help of monoblock pumpset (pumpset shall be managed by the contractor)
(ii) Removing, Mud, Slit/dust from sump by manually & rubbing &
cleaning with gunny bags etc
(iii) washing with fresh water & Bleaching powder two times
(iv) writing the date of cleaning etc by synthetic enamel paint | 1 | Each Job | 8,000 ₹8,000 | 6,500 ₹6,500 | 10,000 ₹10,000 | 5,000 ₹5,000 Lowest |
| 7.00 | Cleaning of swimming pool of size appx 50000GLN(21m x 8m) capacity by dewatering/bailing out muddy staganated water from pool manually or with the help of non clogging pumping set,inner wall scrapping out silt,algae etc from side wall and floors by cleaning steel wire brush ,brooming etc and washing the side walls and floor with caustic soda solution/ bleach washing again with clear water after washing the same with caustic soda solution/bleach.
Note :- Contractor shall make goods to disturbed surface.No extra cost shall be paid on this account. | 1 | Each Job | 10,000 ₹10,000 | 9,000 ₹9,000 | 10,000 ₹10,000 | 5,000 ₹5,000 Lowest |
| 8.00 | M& L for complete removal of existing treatment and applying two coats of white wash on walls complete all as specified. | 500 | Sqm | 25 ₹12,500 | 8 ₹4,000 Lowest | 20 ₹10,000 | 20 ₹10,000 |
| 9.00 | M & L for double legged informatory sign board of size 1.00m x 1.50m (Appx 1.5 sqm) fixed on single frame, both side and meeting back to back on the stainless steel 50x50x3.65mm square pipe. The board are of high intensity grade RETRO-REFLECTIVE SHEETINGOF AVERY DENNSION sheeting made out of 2mm thick alcoband sheet /aluminium composite pannel sheet conforming to IS-736,colour as approved by GE and stainless steel square pipe of size 50x50x3.65mm with nut and bolt. The lettering will be computerised on board. post 50mm stainless square pipe, 3.65 mm thick 3m long having 2 Nos flat iron strip of strip 40x5 mm, 0.30m long on bottom and fixed with PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) in post holes of size 0.45x0.45x0.6 M including dismentaling of old board complete all as specified. | 5 | Each Job | 10,000 ₹50,000 | 7,000 ₹35,000 | 15,000 ₹75,000 | 5,000 ₹25,000 Lowest |
| 10.00 | S&F glow sign board of white polished transparent acrylic cover of minimum 2mm thick, unbreakable, heat resistive etc including M&L of steel fabrication of angles and supports of thickness not less than 2mm thick (thickness shall be variable upto 5mm as per site conditions) rectangular box type of size minimum 180cm x 90cm x 20cm thick, computerised letter of blue colour of size 30cm high and 3 to 5cm width or small as per site requirement having glue on backside to stick permanently, including all kind of securing, welding, assembling with proper allignment and height with fine look, including PCC, cement work, excavation if required, LED tube light fittings 1x 20Watt, including connecting wires and switch independent one way 5Amp with well finish of weather proof suitable for exposing at all weathers including taking down of old UNSV complete all as specified. | 3 | Per Job | 12,000 ₹36,000 | 8,000 ₹24,000 | 2,000 ₹6,000 Lowest | 10,000 ₹30,000 |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
9 Dec 2025, 6:00 pmClosed
GE Bharatpur
GE Bharatpur
REPAIR MAINTENANCE OF DG SETS PUMP SETS CLEANING OF OH TANK UG SUMPS OPEN WELL AND REPAIRS TO MES INSTALLATION AT RMS DHOLPUR
2025_MES_740240_1
8521/E8
Open Tender
Civil Works
Item Rate
180 days
GE Bharatpur
AS PER NIT
8 documents required · 8 mandatory
₹500
Yes
GE Bharatpur
₹70,000
Yes
22 Jan 2026
18 Nov 2025
11 Dec 2025
18 Nov 2025
9 Dec 2025
2 Dec 2025
19 Nov 2025 - 29 Nov 2025
Amount
Cleaning of Shallow wells at Gundrai by cutting the MS sheet of 10mm thick by gas cutter in rectanglur shape approx 10 to 12 RM, welding the MS sheet of 10 mm thick by gas welding with the help of copper rod in rectangular shape approx 10 to 12 RM after completing cleaning work, Lowering the non clog pump set of 5 HP to 40HP capacity in shallow wells and running until well gets empty during the cleaning work is on including transportation expenditure, pipe arrangement etc., Making angle iron fabrication work at site over both shallow wells to rest/fixing chain pully set to draw bucket filled with mud, sludge, dust, fungus, useless stone pieces continuously till all the waste material removed from bottom of shallow well, Cleaning all pores/ Sources of water yield inside well's wall by brooming, brushing, rubbing, clothing until all rubbish material removed from well's wall and cleaning the wall with the help of water jet of sufficient pressure including cleaning of wall by disinfection chemical like bleaching powder properly complete all as specified.
Cleaning of RCC overhead reservoir of 75,000 GLN capacity of 18 Mtr staging including draining out water. Removing, Mud, Slit/dust from Tank. Washing & rubbing with gunny bags & cleaning with fresh water & Bleaching powder including writing the date of cleaning etc by synthetic enamal paint complete all as specified. (a) All necessary ladder and scaffolding arrangement shall be made by the contractor. (b) All kind of safety equipments shall be arranged at site by the contractor. (c) In case of damage of any outlet pipeline/control valves during operation shall be borne by the contractor (d) Disturbed portion if any shall be made good as per existing by the contractor
Cleaning of Masonry /RCC under ground sump of 25000 GLN capacity, Located at Gundrai pump house No 1, including the following works: (i) draining out water with the help of monoblock pumpset (pumpset shall be managed by the contractor) (ii) Removing, Mud, Slit/dust from sump by manually & rubbing & cleaning with gunny bags etc (iii) washing with fresh water & Bleaching powder twon times (iv) writing the date of cleaning etc by synthetic enamel paint
Cleaning of Masonry /RCC under ground sump of 25000 LTR capacity loacted at Cadets hostel area including the following works: (i) draining out water with the help of monoblock pumpset (pumpset shall be managed by the contractor) (ii) Removing, Mud, Slit/dust from sump by manually & rubbing & cleaning with gunny bags etc (iii) washing with fresh water & Bleaching powder twon times (iv) writing the date of cleaning etc by synthetic enamel paint
Cleaning of Masonry /RCC under ground sump of 50000 GLN capacity loacted at Kesarbagh Sump House area including the following works: (i) draining out water with the help of monoblock pumpset (pumpset shall be managed by the contractor) (ii) Removing, Mud, Slit/dust from sump by manually & rubbing & cleaning with gunny bags etc (iii) washing with fresh water & Bleaching powder two times (iv) writing the date of cleaning etc by synthetic enamel paint
Cleaning of Masonry /RCC under ground sump of 50000 Liters capacity loacted at view point old campus area including the following works: (i) draining out water with the help of monoblock pumpset (pumpset shall be managed by the contractor) (ii) Removing, Mud, Slit/dust from sump by manually & rubbing & cleaning with gunny bags etc (iii) washing with fresh water & Bleaching powder two times (iv) writing the date of cleaning etc by synthetic enamel paint
Cleaning of swimming pool of size appx 50000GLN(21m x 8m) capacity by dewatering/bailing out muddy staganated water from pool manually or with the help of non clogging pumping set,inner wall scrapping out silt,algae etc from side wall and floors by cleaning steel wire brush ,brooming etc and washing the side walls and floor with caustic soda solution/ bleach washing again with clear water after washing the same with caustic soda solution/bleach. Note :- Contractor shall make goods to disturbed surface.No extra cost shall be paid on this account.
M& L for complete removal of existing treatment and applying two coats of white wash on walls complete all as specified.
M & L for double legged informatory sign board of size 1.00m x 1.50m (Appx 1.5 sqm) fixed on single frame, both side and meeting back to back on the stainless steel 50x50x3.65mm square pipe. The board are of high intensity grade RETRO-REFLECTIVE SHEETINGOF AVERY DENNSION sheeting made out of 2mm thick alcoband sheet /aluminium composite pannel sheet conforming to IS-736,colour as approved by GE and stainless steel square pipe of size 50x50x3.65mm with nut and bolt. The lettering will be computerised on board. post 50mm stainless square pipe, 3.65 mm thick 3m long having 2 Nos flat iron strip of strip 40x5 mm, 0.30m long on bottom and fixed with PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) in post holes of size 0.45x0.45x0.6 M including dismentaling of old board complete all as specified.
S&F glow sign board of white polished transparent acrylic cover of minimum 2mm thick, unbreakable, heat resistive etc including M&L of steel fabrication of angles and supports of thickness not less than 2mm thick (thickness shall be variable upto 5mm as per site conditions) rectangular box type of size minimum 180cm x 90cm x 20cm thick, computerised letter of blue colour of size 30cm high and 3 to 5cm width or small as per site requirement having glue on backside to stick permanently, including all kind of securing, welding, assembling with proper allignment and height with fine look, including PCC, cement work, excavation if required, LED tube light fittings 1x 20Watt, including connecting wires and switch independent one way 5Amp with well finish of weather proof suitable for exposing at all weathers including taking down of old UNSV complete all as specified.
S&F glow sign board of white polished transparent acrylic cover of minimum 2mm thick, unbreakable, heat resistive etc including M&L of steel fabrication of angles and supports of thickness not less than 2mm thick (thickness shall be variable upto 5mm as per site conditions) rectangular box type of size minimum 400cm x 60cm x 20cm thick, computerised letter of blue colour of size 30cm high and 3 to 5cm width or small as per site requirement having glue on backside to stick permanently, including all kind of securing, welding, assembling with proper allignment and height with fine look, PCC, cement work, excavation if required, LED tube light fittings 1x 20Watt, including connecting wires and switch independent one way 5Amp with well finish of weather proof suitable for exposing at all weathers including taking down of old UNSV complete all as specified.
M&L for Cutting anxious green growth / vegetation growth from root for cleaning out the area around OH tank / pump house No-1&2&3 at Gundrai and kesharbagh sbustation , Kesarbagh sump house and at ground level by cutting up root, un- wanted plants / bushes and removal the same to a distance not less than 50 mtr including levelling of land through JCB complete all as specified. Note: (i) Rate including Cutting T&P, transporting/disposal/dumping away from the site as per the laid down procedure of waste management system shall be considered with this item rate. (ii) Entire site shall not be given for one time. Area for cleaning shall be given to the contractor on requirement basis as per the site conditions and growth rate of bushes and grass etc. The area shall be divided into several parts and shall be directed to the contractor when cleaning is required at site. (iii) The above job will be measured one time only and contractor shall be responsible to clear any vegitation and cleaning reqd at site during entire contract period .
Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete fittings such as switches, ceiling roses, pendents, regulators, sockets etc removing materials for taking credit and making good disturbed surfaces of wall, floor & ceiling etc complete all as specified.
M&L point wiring concealed type complete including cutting chases for conduit pipes on stone masonry wall with 1.5 Sqmm 02 x single core multistranded copper conductor of 1100 volts grade PVC pre insulated FRLS and unsheathed cable enclosed in steel conduit pipes with all steel accessories such as Tee, bend, collar, elbow, square junction box etc fixed inside the wall/ceiling by means of steel conduit pipes and suitable accessories including suitable size of PVC boards/existing sunken box with modular boards for mounting fittings like switches, sockets, fan regulator etc including 1.5 Sqmm insulated but unsheathed copper earth continuity conductor to common earth and connedcted to earth dolly complete rate including cutting chases and finishing the wall after concealing the pipe with suitable plastering/putty/distembering etc complete all as specified for the following :-
One light point controlled by one way switch.
One ceiling fan/exhaust fan point controlled by one way switch.
One 3 pin or 5 pin 6 Amp socket point outlet on the same board with other switches.
One 3 pin or 5 pin 6 Amp socket point outlet on the independent board.
All as per item No 14 above but with multi stranded copper conductor cable 2.5 Sqmm size for 3 pin 16 Amps socket point outlet on independent board including 2.5 Sqmm copper cable PVC insulated FRLS unsheathed copper continuous earth wire including connecting to common earth dolly complete all as specified.
S&F modular switch 1 way , 6 Amp, 1 module, as per existing model and type complete all as specified.
S&F modular switch 1 way , 16Amp, 1 module, as per existing model and type complete all as specified.
S&F modular socket on existing plate, 6Amp, 2/3 pin combined, 2 module as per existing type and model complete all as specified.
S&F modular socket on existing plate, 6Amp/16Amp combination, 2/3 pin combined, 2 module as per existing type and model complete all as specified.
S&F modular white cover plate with frame of 3 module as per existing model and type complete all as specified. Make - Anchor/Legrand/Crab Tree/Anchor or equivalent
S&F modular white cover plate with frame of 4 module as per existing model and type complete all as specified. Make - Anchor/Legrand/Crab Tree/Anchor or equivalent
S&F modular white cover plate with frame of 6 module as per existing model and type complete all as specified. Make - Anchor/Legrand/Crab Tree/Anchor or equivalent
S&F modular white cover plate with frame of 8 module as per existing model and type complete all as specified. Make - Anchor/Legrand/Crab Tree or equivalent
S&F modular white cover plate with frame of 12 module as per existing model and type complete all as specified. Make - Anchor/Legrand/Crab Tree or equivalent
S&F modular flush metal box 3 module complete all as specified.
S&F modular flush metal box 4 module complete all as specified.
S&F modular flush metal box 6 module complete all as specified.
S&F modular flush metal box 8 module complete all as specified.
Taking down old U/S sub main wiring of any size complete all as specified.
M&L submain wiring complete with 4 Sqmm single core multi standred PVC insulated and sheathed cable FRLS copper conductor two runs and one run of 4 Sqmm copper cable for earth continuity conductor(measured as one RM) in and including drawn through PVC casing capping PVC conduit/sleeves with all PVC accessories fixed on wall, floor/ceiling and making good the distrubed surface by putti/cement and paint complete all as specified.
Taking down old U/S rusted main switch/MCB/DB of any size capacitycomplete all as specified.
Distribution board factory made and tested made of sheet metal enclosure powder coated suitable for mounting the MCB 240 volt of the following DBs :-
4 way TPN with busbar 415 volts (double door type).
8 way SPN with200 Amp rated busbar 240 volts (double door type).
4 Way SPN with 200Amp rated busbar 240V (Double door type)
S&F MCB 240 volts 10 KA, rupturing capacity fixed in DB's of the undermentioned type and rating.
MCB SP 240 volts 10-40 Amps
MCB SPN 240 volts, 40 Amps
MCB TPN 415 volts, 63 Amps 16 KA 4 Pole
S & F in repair LED batten 20watt suitable for 1200mm long with G-13 lamp holder T5 and T8 , housing finished in alluminium powder coating complete with all accessaries complete all as specified.
M&L batten/angle holder insulated with back plate including suitable size of PVC round block complete all as specified.
S&F LED bulb 07W cool day light , in-built voltage surge protection > 3.5kV, single ph, 230V, luminous efficacy 100Lm/Watt, base B22, min 3 star rated complete all as specified.
S & F in repair LED light fitting mirror type with high output diffurser 2 feet, 7w/10w 220V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable suitable size complete all as specified.
Supply and fix LED batten tube light 18/20w with battery and inverter power 230V 50Hz having colour rendering index equal or more then 80 , THD less then 30%, copper wired having colour temperature 6300K, internal surge protection device upto 3kV , comprising of Li Ion battery 1nos and emrgency/power failure backup of minimum 4hours, aluminium extruded housing and polycarbonate front cover, working life should be as per LM 80 complete all as specified.
Excavation in trenches not exc 1.5 m in depth and not exc 1.5 m wide for taking out/laying LT UG cable, Stay wire and LT pole/post holes etc and getting out in hard/disintegrated layer complete all as specified.
Removing excavated soil at a distance not exc 50 m and deposited where directed complete all as specified.
Returning,filling in including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as specified.
Supply & laying sub class B bricks, locally available suitable for LT cable protection cover complete all as specified.
M &L local river sand for bedding ang sand cushioning of all LT UG cable complete all as specified.
Supply, laying and testing cable XLPE insulated,screened, PVC bedded, galvanised steel strip or wire armoured,electric power cable (heavy duty) with stranded aluminium conductor 1100V grade , 3 1/2 core of size 95 Sqmm, rate including taking out of old UNSV cable from trench/floor etc complete all as specified.
Supply, laying and testing cable XLPE insulated,screened, PVC bedded, galvanised steel strip or wire armoured,electric power cable (heavy duty) with stranded aluminium conductor 1100V grade , 3 1/2 core of size 70 Sqmm, rate including taking out of old UNSV cable from trench/floor etc complete all as specified.
Supply, laying and testing cable XLPE insulated, screened PVC bedded, galvanised steel stripped or wire armoured electric cable heavy duty with stranded aluminium conductor , 1100Volts grade of size 16 Sqmm 4 core complete all as specified.
Supply, laying and testing cable XLPE insulated, screened PVC bedded, galvanised steel stripped or wire armoured electric cable heavy duty with stranded aluminium conductor , 1100Volts grade of size 10 Sqmm 2 core complete all as specified.
S & F or laying galvanised steel tubing Light grade (ISI marked) for protection of under ground cable on poles/walls under road crossing of size 40 mm borecomplete complete all as specified.
S&F of "Lithium based Energy Efficient Integrated Solar Street Light of 40 Watt"in Single aluminium housing body , encases with Monocrystaline Solar PV Panel of minimum 40 Wp, Lithium Battery 11.1/12.8V, 33/36AH with inbuilt BMS, IP 65, high brightness, CRI>70, Color temperature 5700-6500K, Microcontroller based charge controller cum driver, automatic dimming function, Dusk to Dawn Operation, suitable to working temperature:(-) 10 degree celcius to (+) 55 degree celcius with adjustable MS clamp and suitable for pole/wall mounting etc complete including street light GI bracket of 1 mtr long made out of 40mm dia light grade GI pipe bend to shape of 120 degree end welded at required including 02 Nos MS clamp of FL 40 x 6mm including nuts bolts & washers complete necessary fixing arrangements on pole and Protection: Short Circuit, overload, Reverse polarity and battery protections complete including taking down complete all as specified. Make:- Havells/Philips/Orient
Taking down and S&F 60 watts LED street light fitings new generation energy saving, environmental friendly, long life, versatile pressure die cast aluminium IP66 with 10KV surge protection road way, luminaire with high power LED as light source and suitable drivers etc to complete all as specified.
Taking down and S&F 70 watts LED flood light fitings new generation energy saving, environmental friendly, long life, versatile pressure die cast aluminium IP66 with 10KV surge protection road way, luminaire with high power LED as light source and suitable drivers etc to complete all as specified.
M&L for rewinding of 7.5/5 HP monoblock pumpset installed at Gundrai Sump and cdts hostel including taking out from mounting , disconnecting all electrical and water connections , transportation to workshop and installaing back after rewinding, replacing defective capacitor, impeller housing, bearing, GI fittings of 20mm all kind, lathe work if required, testing as per the Govt procedure after installation etc complete all as specified.
Supply and fix on load change over switch 415 v in sheet metel enclouser 4 pole of capacity 160 amp complete all as specified.
Supply and fix on load change over switch 415 v in sheet metel enclouser 4 pole of capacity 200 amp complete all as specified.
Material and labour for renewal of Chemical Earthing complete with copper earth plate electrode of size 600x600x3mm thick buried directly in ground (earth pit should not less than 4 mtr deep below normal ground level ) with top edge of the plate not less than 2.95 mtr deep below normal ground connected to and included copper earth strip 20mmx 3mm by means of copper bolts nuts check nuts and washer returning and filling the pits with excaviated vsoil mixing with charcoal 250 kg crystal salt 200 kg magnisiun sulphate of 100 kg and vegitable soil all around the plate up to 350 mm above from top edge of plate and balence portion filling with excaviated soil in layers not exc 25 mm thick 25 mm bore galvanised iron medium grade watering pipe up to top of plate 50mm bore galvanised iron light grade pipe for earth strip protection including all excavation earth work in any type of soil pcc 1;3;6 type c1 ....for chamber of internal size 300mmx 300mmx300mm with 120mm thick wall and 700mmx700mmx150mm thick bed concreat RCC 1:2:4 ,type b1 for precast chamber cover 50mm thick reinforced with welded steel wire fabric orxPM jali (weight not less than 4.00 kg/sqmm) ,funnel,with wire mesh complete all as specified. Note (i) Quoted rate shall be deemed to include for earth strip with protection pipe up to 7.5 M length
Material and labour for making the hole under road and hard standing for laying Galvanised steel light grade pipe upto 100 mm dia including all fittings as required at site by mechanical drill system or Auger system and making the surface good as per existing surface complete all as specified. Note : The cost of Galvanised steel pipe shall be measured and paid separately under appropriate item of BOQ.
Servicing of industrial RO Plant installed at academic complex including back washing, cleansing the filter medium, resetting all TDS upto the recommended level by PHED, checking all valves, servicing the turbo jet motor for raw water, checking and tighting all mounting brackets, nuts. Bolts etc. removing fungus by cleaning of raw water and filtered water storage tank complete all as specified. Note: Technician should be hired from reputed company of the RO plant. No extra allowance shall be be given to the technician. Coneyance must be ensured by the contractor only. No vehicle shall be provided for the conveyance of the technician by MES.
S&F for replacement of the following spare parts of RO plant of capacity 200LPH and 500LPH installed at academic complex:
Primary sediment cartridge Filter
Secondary sediment cartridge Filter
RO membrane as per the existing make and model suitable for 200LPH capacity
RO membrane as per the existing make and model suitable for 500LPH capacity
Rewinding of raw water motor and servicing of pump assembly of capacity 2HP
PCB control panel with LED display and mounting accessories and testing etc
supply and fix Rubber mat of 1 meter x 2 meter x 25 mm complete all as specified.
Supply and fixing in replacement of old unsv Direct Online Starter of capacity 7.5HP/10HP suitable for monoblock pumpsets installed at cadets hostel area complete all as specified.
Supply and fixing in repair fully automatic star delta starter comprising of voltmeter 0-500 V and ammeter 0-100 Amps, single phase preventor, over load relay and timer housed in single MS sheet powder coated enclosure suitable for up to 40 HP and above 70 amp submersible/centrifugal motor pump including first filling of oil in oil chamber (If Required) and testing complete all as specified.
Supply and fixing in repair fully automatic star delta starter comprising of voltmeter 0-500 V and ammeter 0-100 Amps, single phase preventor, over load relay and timer housed in single MS sheet powder coated enclosure suitable for up to 50 HP and above 70 amp submersible/centrifugal motor pump including first filling of oil in oil chamber (If Required) and testing complete all as specified.
Material and labour for Rotational moulded polyethylene water storage tanks 500Ltr (cylindrical vertical with closed top) hoisted and fixed in position with float valve complete all as specified in SSR Part I
Supply only Calcium based high strength granular Chlorination chemical water disinfectant, a white free flowing granular material which is free of Foreign materials, concentration of Chlorine content should be between 60 to 70 percentage stability complete all as specified.
Supply only Swimming pool water clarifier in 1L or 5L packaging suitable for traping suspended solids, debris, scum, oil, and excess garbage, single step rapid treatment for swimming pool cloudy water suitable with all type of filters complete all as specified.
Supplying and adding swimming pool flocculant / Crystal alum of superior quality as directed by Engineer-in-Charge
Supply and install 5 Micron filter bag as of existing size suitable for pipelsess filtration system complete all as specified.
Supply and testing of maintenance kit having one pc Leaf Net, Standard wall brush 18", algae brush SS 10", telescopic handle 4.8 mtr, hose pipe 15 mtr with standard cuff, test kit and aluminium vaccum head complete all as specified.
Excavating in post holes (or similar holes) each n. exc. 0.5 cum, gettting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc. 25 cm, watering and removing surplus soil to a distance n exc. 50 mtr in soft disintigrated rock and making good surface complete all as specified.
M &L PCC (1 :4:8) type D2 using 40mm grade stone aggregate as in post holes complete all as specified.
S&F Angle iron fencing post and struts including cutting tops to shape as directed drilling holes, notching for wire etc, flat iron fillets (for securing wire mess etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe 410-0 or Fe 310-0 including round bars etc complete all as specified.
Fixing only chain link fencing including line wire any mesh size and type of standards raills, starining bolts ewtc including provisioning of binding wire complete all as specified.
Supply only chain link MS galvanised fencing any size or type complete all as specified.
S&F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strainging bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or stel pins, etc. complete all as specified. (each line wire to be measured)
Mild steel screw bots (machine made ) with hexagonal or square heads at one end and screwed the other each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 05 cm but not exc 10 cm and 10 mm dia complete all as specified.
S&F for Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.
Preparation of new steel surfaces exc 10 cm width or girth and applying two coats of syntetic enamel paint over one coat of red oxide of zinc chrome primer complete all as specified.
Servicing of DG set 82.5KVA water/air cooled (Kirloskar) by unscrewing nuts, bolts and servicing of DG set with checking, draining and changing of Engine oil and Coolant, checking and changing of V-belts, greasing and oiling of all relevant parts and topping up, Cleaning the inner body of Fuel tank and Radiator etc by removing sludge etc and reassembling the DG set after repair and replacement of unserviceable parts of DG set including repair of control panel, opening of alternator, water pump, starter motor for cleaning, servicing and refixing. Checking and servicing of Battery and testing complete all as specified.
Servicing of DG set 63KVA water/air cooled (Kirloskar) by unscrewing nuts, bolts and servicing of DG set with checking, draining and changing of Engine oil and Coolant, checking and changing of V-belts, greasing and oiling of all relevant parts and topping up, Cleaning the inner body of Fuel tank and Radiator etc by removing sludge etc and reassembling the DG set after repair and replacement of unserviceable parts of DG set including repair of control panel, opening of alternator, water pump, starter motor for cleaning, servicing and refixing. Checking and servicing of Battery and testing complete all as specified. Note: Spares shall be measured & paid separately for dismantling of DG set partly or full shall be paid accordingly.
Supply only following spare parts for item above DG Sets
Air cleaner element/filter
Water hoses including clamps complete all as specified.
Fuel filter element.
oil filter
Fuel level sensor
oil Temp sensor
Fan belt.
Head Gasket
Engine Cylinder liner
Enginer piston Ring Kit
Liner 'o' Ring set
Head Valve
Valve Guide
Valve set
Push Rod
Battery 150 AH (Type Flat Bed, Maintenance Free) Make :- Exide/ Amaron/ Luminous
Analog type Voltmeter as per existing make all as speified
Analog type Ammeter as per existing make all as speified
coolant in one/two ltrs packing complete all as specified and directed by Engineer-in-Charge.
Supply only distilled water in one/two ltrs packing.
Supply & filling oil of recommended grade (DF-4, 15 W 40) all as specified and directed by Engineer-in-Charge.
Supply only expansion joint of Engine outlet all as specified
Supply only of data card of auto control panel of existing make or as specified
Supply,connect,fix and test submersible cables copper conductor PVC insulated over all sheathed flat flexible, ISI marked - Conforming to IS 694,1100 volts grade complete of sizes
10 sqmm 3 core
16 sqmm 3 core
Taking out old Existing U/S MCCB from LT panels/ Feeder piller of following capacity and replace with new MCCBs without damaging the LT panel board or any assets associated with the installation. (a) MCCB 4 pole TPN, 160Amps capacity, 36KA breaking capacity, 415V,adjustable thermal & fixed magnetic setting, Ics = 50% of Icu,
MCCB 4 pole TPN, 200Amps capacity, 36KA breaking capacity, 415V,adjustable thermal & fixed magnetic setting, Ics = 50% of Icu, complete all as specified.
MCCB 4 pole TPN, 250 Amps capacity, 36KA breaking capacity, 415V,adjustable thermal & fixed magnetic setting, Ics = 50% of Icu complete all as specified.
MCCB 4 pole TPN, 400 Amps capacity, 36KA breaking capacity, 415V,adjustable thermal & fixed magnetic setting, Ics = 50% of Icu complete all as specified.
MCCB 4 pole TPN, 630 Amps capacity, 36KA breaking capacity, 415V,adjustable thermal & fixed magnetic setting, Ics = 50% of Icu complete all as specified.
MCCB 3 pole TP, 63 Amps capacity, 16KA breaking capacity, 415V,adjustable thermal & fixed magnetic setting, Ics = 50% of Icu complete all as specified.
MCCB 3 pole TP,100Amps capacity, 16KA breaking capacity, 415V,adjustable thermal & fixed magnetic setting, Ics = 50% of Icu complete all as specified.
Dismantling electric motor of centrifugal pump 3 phase for 440 volt 30 HP and rewinding of motor with super enameled copper wire of same guage & turn including material, varnishing, re-assembling, testing & commissioning complete all as specified. Note: Spares shall be measured & paid separately for dismantling of pump set partially or complete shall be paid accordingly.
Dismantling electric motor of centrifugal pump 3 phase for 440 volt 15 HP and rewinding of motor with super enameled copper wire of same guage & turn including material, varnishing, re-assembling, testing & commissioning complete all as specified. Note: Spares shall be measured & paid separately for dismantling of pump set partially or complete shall be paid accordingly.
Supply only spare parts for above Centrifugal Pump of 30 HP and 15 HP at item No above
Ball bearing SKF/NBC (6309)
Pump shaft with Key
Coupling Key
Gland Plate (Set of two)
Gland Bush (Gun metal)
Coupling rubberised
Foot valve 80mm GI or CI heavy grade as per existing
High performance AP3 Grease in 1Kg or 2kg packing Make; NBC/Bosch/Castorl/HP or equivalent
Supply and fixing in repair of GI water tubing IS-1239 marked, medium grade, in replacement including all necessary pipe fittings laid in trenches, on wall, under floor, under road on same or new route and making good the disturbed portion as existing and including taking down of old unserviciable pipe of the following sizes :- Note :-excavation earth work will be measured and paid saperatly.
15mm bore
20mm bore
25mm bore
40mm bore
Taking out submersible pump set of capacity 40HP 3 Phase 415 volt AC supply alongwith column pipes from the bore well by disconnecting electric connection, disconnecting the motor from pump dismantling the motor & over hauling the same by repairing/ replacing defective part as ordered & re-assembling including M&L for replacing worn- out nuts bolts washers complete, connecting /coupling the motor with pump & with column pipes & lowering the same after repairing, making the connecion complete.
Taking out submersible pump set of capacity 20HP 3 Phase 415 volt AC supply alongwith column pipes from the bore well by disconnecting electric connection, disconnecting the motor from pump dismantling the motor & over hauling the same by repairing/ replacing defective part as ordered & re-assembling including M&L for replacing worn- out nuts bolts washers complete, connecting /coupling the motor with pump & with column pipes & lowering the same after repairing, making the connecion complete all as specified. Note: Spares shall be measured & paid separately for dismantling of pump set partly or full shall be paid accordingly.
Supply only spare parts for above 40HP/20HP submersible pump above
Hook bolt
Motor Bush
Rubber Bush
SS Bush
Stud with nuts & bolts
Neck Ring
Impeller
Top/Bottom bearing bush
SS Rooter sleeves
Thrust Plate
SS shaft
Bowl Bush
Diffuser CI/Steel
M&L for rewinding the submersible Motor 40 HP with super enamaled copper winding wire of suitable gauge & superior class of insulation including insulation paper sleeves thimbles etc & testing complete all as specified.
M&L for rewinding the submersible Motor 20HP with super enamaled copper winding wire of suitable gauge & superior class of insulation including insulation paper sleeves thimbles etc & testing complete all as specified.
M&L for rewinding the Submersible pump Motor 5HP/7.5HP with super enamaled copper winding wire of suitable guage & class of insulation including insulation paper sleeves thimbles etc & testing complete all as specified.
Labour only for servicing APFC panel board and cochecking all the contact terminals and capacitors, repairing the terminal wire circuits, tightening all kind of nuta sn bolts, screws atc, cleaning inside the chamber, enclosure etc, checking the connection of CT coil from panel to main incoming source and repairing in case of any fault in connections complete all as specified. Note: Replacement of Spares shall be measured and paid separately.
Supply and replacement and testing at site of the following accessories of APFC panel complete all as specified.
Cylidrical series capacitors, KVAr rating 2, 440V, 3Ph, heavy duty complete all as specified.
Cylindrical series capacitors, KVAr rating 5, 440V, 3Ph, heavy duty complete all as specified.
Cylidrical series capacitors, KVAr rating 10, 440V, 3Ph, heavy duty complete all as specified.
VAF + PF meter accuracy class 1.0. 0.5, input voltage measurement range 50 - 520 VAC (P-P), Aux supply 80-300 VAC/DC, CT secondary side 1A/5A, Flush mounting 96x96, CT/PT programmable, Para meters VLL, VLN, A, F, PF, On Hrs, RPM, Apeak etc with RS485, Cl-1, complete all as specified.
Supply only Aluminium Lugs of size as under complete all as specified:-
Supply only Copper lugs of size 16sqmm to 25sqmm all as specified
Supply and fixing in replacement of sluice valves of cast iron body with forged brass spindle, class PN 1.6 and cast iron wheel head, both ends flanged, IS-1486 marked complete with neoprene rubber gasket joints, nuts, bolts (high tensile), and washers etc complete all as specified of following size:-
150mm bore flanged end.
100mm bore flanged end.
Supply and fixing in replacement of non return valve, flanged ends PN 1.0 ISI marked of 100mm bore complete all as specified.
Supply and fixing in replacement of non return valve, flanged ends PN 1.0 ISI marked of 80mm bore complete all as specified.
M & L for dismantling existing broken valve pit complete with corroded MS sheet cover including removal of all material and construction of valve pit chamber, brick masonry all as specified in drg No TD/2004/26 sheet 1/3 to 3/3 for sluice valve including plastering, PCC in foundation excavation and earth work, MS sheet cover (3mm thick) with locking arrangement, painted with two coats of anticorrosive paint over one coat of primer of following sizes:-
1000mmx 950mm x 1000mm
1200 mmx 1200mmx 1000mm
supply and fix Nuprine rubber / Leather gasket minimum thickness 8mm suitable for tightening the GI flange or any othe joints of 100mm dia with nuts and bolts complete all as specified.
Demolition of old PCC foundation any type and size including removal of anchor bolt and removing debris from site at safe place as eco friendly manner complete all as specified.
M&L for PCC work for pumpset platform and other misc pedestal supports, type C1, mixing ratio 1:3:6 using 20mm gradded aggregate complete including form work etc complete all as specified.
Painting of motor and pumpset centrifugal type 30HP,monoblock pumpset,mounting channels of pumpset of any size by one x sigle coat primer and applying spray painting of two coat synthetical enamel paint of approved colour etc without disturbing anyother parts of the complete all as specified.
Danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters figures and conventional skull and bones in singnal red colour and fixed with MS clamps, bolts and nuts of approved size for LT of 20x15cm complete all as specified.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.
Non skid coloured ceramic tiles area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 sqm (400x400) 7 to 8 mm thick in floor/skirting set in neat cement slurry and pointed with coloured/white cement to match the surface complete all as specified.
M&L Screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes complete all as specified.
M & L Glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface over and including 10 mm thick CM 1:4 complete all as specified.
M&L for Complete removal of existing treatment,washing, rubbing down and stopping of distemperd and painted surface of old surface by Electric Rotary grinder including brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorscent salts and trading oil and greasy spots of Wall Surface removing of nails, making good holes , cracks etc , cleaning of floors , glasses, joinery of drops and splashes incl all arrangement necessary for execution of work, complete all as specified.
M&L for Two coats of oil emulsion distempering white or tinted (copolymer based resin glue to be added for longer durability and better finish) over plastered & including 1.5mm thick wall care putty on Wall after sand paper gentle rubbing to obtain smooth surfaces including all necessary arrangement for execution of work complete all as specified.
M&L for Preparation of old decorative concrete, plastered/ un-plastered surface of wall including cornices, pilasters etc by brooming down, steel wire brushing ,scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots removing nails and filling small holes by putty and rubbing surface by sand paper to prepare the surface and applying Two coat of cement based paint using hand roller of approved colour complete all as specified.
S&F factory made solid panel PVC door shutters 30 mm thick (style) consisting of fram made out of MS tubes for top & bottom rails. MS fram shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS fram welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling & fixing in the fram at site complete all as specified.
S&F PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS squar tube , fixing in opening complete all as specified.
S&F 100 mm butt hinges medium weight cold rolled mild steel, ISI marked, fixed to angle iron chowkats including welding complete all as specified.
S&F 125 mm Aluminium handles, cast type,anodised complete all as specified.
S&F 150 mm Aluminium anodised,barrel tower bolts of extruded section complete all as specified.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified.
S&F 3.00mm thick sheet glass ordinary quality and glazing with oil putty in square n'exc 0.5 sqm in each pane complete all as specified.
M&L for Dismantling of old/UNSV LT panel , open up all electric connection , dimolishing existing broken PCC making disturb surface good complete all as specified.
Supply and install in replacement battery of rating 12.8V 30/33Ah for lithium base energy efficient integrated solar street light as per standard and compitable for existing solar light complete all as specified.
M/S MAMTA CONSTRUCTIONS (BID ID -3493416)
Rajesh Mishra (BID ID -3493149)
Unnati Engineers (BID ID -3489133)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.63 MB
tender8521.pdf
Tender Documents • 2.29 MB
BOQ_828872.xls
BOQ • 0.71 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .