Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.4 LAccepted-AOC | L1 | Accepted-AOC Lowest and reasonable bid | |
| 2 | L2₹8.0 L+₹61,545.30 (8.37%)Rejected-Finance H NO 40 CHOTTI BARADARI PART I GARHA ROAD NEAR MEDICAL COLLEGE JALANDHAR 144 022 PUNJAB | JALANDHAR | JALANDHAR | PUNJAB | 144022 | L2 | Rejected-Finance other than lowest bid | |
| 3 | L3₹8.9 L+₹1.6 L (21.6%)Rejected-Finance | L3 | Rejected-Finance other than lowest bid | |
| 4 | L4₹9.5 L+₹2.1 L (28.6%)Rejected-Finance RAM SHIV COLONY GALI NO 2 NAIKA CHATNAG ROAD JHUNSI PRAYAGRAJ UP 211019 | PRAYAGRAJ | UTTAR PRADESH | 211019 | L4 | Rejected-Finance other than lowest bid |
Tender Value
₹8.6 L
EMD Value
₹17,276
Closing Date
19 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) SURANUSSI
MIL STN SURANUSSI
PROVN OF 01 X 30 KVA GEN SET FOR POWER BACKUP AT NFS NODE SURANUSSI UNDER AGE (I) SURANUSSI
2023_MES_629445_1
AGE(I)S-30/2023-24
Open Tender
Civil Works
Item Rate
180 days
SURANUSSI
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
AGE (I) SURANUSSI
₹17,276
Yes
18 Jan 2024
23 Nov 2023
26 Dec 2023
23 Nov 2023
19 Dec 2023
7 Dec 2023
Amount
Surface dressing n.exc 15 cm deep in soft/loose soil etc complete all as specified and directed by Engr-in-charge.
Excavating in post holes ( or similar holes ) each n exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm , watering, and removing surplus soil to a distance n exc 50 mtr.
Material and labour PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in columns, pillars, posts etc including weathering, slightly rounded or chamfered angles and throating, as directed
Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25cm in soft /loose soil all as specified and directed
Spreading ,levelling ,watering and well raming the earth filling under floor 25 cm thick in layers complete
Material and labour for hard core stone aggregate of gauge n. exc 63mm, deposited, levelled in layers n.exc 15 cm thick watered and well rammed to a true surface complete all as specified and directed by Engr-in-Charge
Material and labour 100 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base complete all as specified and directed by Engr-in-Charge
Material and labour 100 mm thick PCC 1:2:4 type B-2 using 40 mm graded stone aggregate as in floor complete all as specified and directed by Engr-in-Charge
S&F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed completed all as specified
S&F Steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified and directed
S&F Rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates conforming to Fe-290 (Gde E-165) complete all as specified and directed.
S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc, and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
Supplying, installing, commissioning and testing complete of silent diesel engine driven generating set with canopy as per , central pollution control board norms, 415 Volts 3 phase, 4 Wire, 50Hz supply complete suitable for giving an output of 30 KVA. The DG set shall consist of a diesel engine coupled directly to a matching parts or as recommended/provided by the manufacturer on common base frame and thereafter installed in the CPCB approved acoustic enclosure. (The complete set conforming to and test certificate as per CPCB norms and as specified) complete with AMF Control panel standardized by manufacturer, fuel tank with mounting arrangement and inlet, outlet, return oil arrangement flexible exhaust pipe complete and shall comprise the followings :- (a) Alternator :- Alternator 30 KVA suitable for operation at 1500 rpm output at 0.80 PF,AC,3 Phase,4 wire ,415 volts 50Hz, conforming to BS 5000/IS 4722. The alternator shall be brushless type, screen protected, drip proof, revolving field, self excited, self regulated through an AVR. (b) Diesel Engine :- Diesel Engine model ALP15DG1 shall be 3 cylinder, 4 strock in-line water cooled engine with prime mover output of 37 BHP (27.6 KWM), with electric start and designed to run at 1500 rpm continuous on 100% load & also capable to take 10% overload for 1 hours out of 12 hours of operation etc all as specified and directed. (c) Control Panel The standard control panel consisting of control genset controller, a modern and feature rich genset controllers with user-friendly HMI and full graphic LCD. The GC902 controllers bundled with highly versatile software & variety of industery standered features in Diesel Genset. It shall consists of features such as electronic governing for engines with mechanical fuel system, a SEDEMAC rotary actuator as fuel charge control. The GC902 controllers shall subsume the electronic governing duty for the engine and offer tight speed governing performance with ISO 8528:G3 class limit. (d) Electric Starter Equipment The equipment will comprise the followings:- (i) Maint free Battery duly initially charged and Battery lead of adequate capacity. (ii) Starter motor (iii) Starter gearing (iv) Start/ stop push button (v) Invertors cum battery charger 500 VA capacity suitable to work on 230 volts 50HZ AC supply system for charging of DG set batteries externally when DG set is in off position (vi) Alternator / Dynamo of suitable capacity to charge the batteries while DG set is running complete with auto cut out all as per manufacturer recommendations. (e) All accessories prewired with suitable size PVC insulated copper conductor cable of appropriate size including connection from DG Set all as required at site including foundation as per manufacturer recommendations. (f) PCC foundation 1:2:4 type B-1 (Using 20 mm graded crushed stone aggregate) including excavation & earth work all as per manufacturer's recommendation. (g) Foundation (i) DG set shall be installed on the proposed foundation block including installation of new foundation bolts if necessary, cable duct, fuel piping GI piping (Medium grade ) complete all as manufacturer's instructions and the cost of the same shall be deemed to be included in the unit rate quoted by contractor against this item. (ii) The complete generating set inclusive of control panel base frame coupling etc shall be from the Engine & shall be assembled & tested at Engine manufacturer's workshop and test certificate shall be provided by contractor. NOTE:- The engine shall be affixed with label meeting the following requirements (The label shall be durable and legible). (i) Name and address of the engine manufacturer.(ii) Statement that the engine conforms to environment (protection) Rule1986.(iii) Type approval certificate number.(iv) Date of manufacture of engine. (v) The complete generating set including control panel base frame coupling etc shall be from the Engine & shall be assembled & tested at engine manufacturer's workshop and test certificate shall be provided by contractor.
Earthing complete with galvanised copper earth plate electrode 60 x 60 cm x 3.15 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to copper earth lead strip 20 x 3 mm fixed by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate no. 3 connected to earthing test point all as specified or indicated including testing on complection., earth plate surrounded by packed layers of charcoal dust and common salt each 15cm thick, all around including top and bottom and watering pipe 20mm bore of GI pipe light grade with funnel and wire mesh, PCC chamber of size 300x300x300mm (top of chamber minimum 15 cm above the normal ground level (1:3:6) using 20mm graded stone aggregate and RCC cover (1:2:4) type B-I using 20mm graded crushed stone aggregate with 1 nos mild steel handles made out of 8mm dia mild steel bar including necessary excavation/ earth work in any type of soil/rock and as shown in Electrical plate No. 3 of SSR Part-I (2020) testing on completion complete all as specified.
Earth continuity conductor or main earth lead fixed to walls or recesses in chases or buried in ground or drawn in conduit pipe or any indicating situation using copper strip of size 20 x 3 mm complete all as specified.
Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre deep and getting out in soft/loose soil complete all as specified and directed by the Engr-in-Charge.
Removing excavated materials to a distance not exceeding 50 mtr and deposting where directed at a level not exceeding 1.5 m above the starting point all as specified and directed .
M&L for sand cushioning to under ground cable using tibba sand and gently punning to cushioning to cable complete all as directed by Enginner-in-charge .
Supply and laying sub class 'B' bricks laid dry flat transversely along the length of cable with width equal to the length of bricks over sand cushioning as protection cover of cable laid complete all as specified and directed.
XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 sq mm 3.5 core all as specified and directed.
Supply and fix ON LOAD change over switch 415V in sheet metal enclosures 4 pole of capacity 63 Amps all as specified and directed.
UNITED ENGINEERING CORPORATION
DUGGAL CONSTRUCTION CO
TARA ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .