SPECIAL REPAIR FOR WATER PROOFING OF ROOF TOP, STRENGTHENING OF WALLS AND REPLACEMENT OF DAMAGED WINDOWS AT 2 AND 3 FLOOR OF C NO 05/DDB DEPT OF EPS BUILDING AND AT ROOF TOP STRUCTURAL REPAIR AND REPLACEMENT OF DAMAGE WINDOW AT 2ND FLOOR OF CNO 73 MI

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), cement concrete tiles etc removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by the Engineer-in- charge

Material and labour Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile exceeding/equal to 0.36 sqm but n exc 0.42 Sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 20mm thick screed bed in CM 1:4 complete all as specified and directed by the Engineer-in- charge

All as per item No. 2 above but as in skirting including 10mm thick rendering in CM. 1:4 as backing coat etc complete all as specified and directed by the Engineer-in- charge

Material and labour for Non skid coloured ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles with and including 15mm thick screed bed in CM 1:4 complete all as specified and directed by the Engineer-in- charge

Material and labour for Coloured glazed ceramic tiles in vertical surface 450 X 300 X 7 mm thick, set and jointed in neat cement paste and pointed in coloured cement to match the shade of the tiles with and including 10 mm thick backing coat in CM 1:3 complete all as specified and directed by the Engineer-in- charge

Material and labour for PCC 100mm thick D-2 type (1:4:8), using (40 mm graded crushed stone) as in sub base complete all as specified and directed by the Engineer-in- charge

Dismantling of wall and ceiling boards (fibre, pulp, insulation) or insulation boards, false ceiling, wall panneling & partation boards bonded wool, blanket slab incl aluminium grid frame work complete all as specified and directed by the Engineer-in- charge

Material and labour for POP false ceiling using 600 x 900x 12mm thick plaster of paris with gypsum binder sheet decorative type and necessary provision for concealed type light fittings, fixed on 22 guage GI channel grid work, main joist of size 50 x 25 mm spaced at 750 mm centre, secondary joist of size 75 x20 mm fixed to main joists spaced to 900mm, suspended to roof members using 25x25x2 mm GI angles and fasteners @ 1.2M C/C, complete all as specified and directed by the Engineer-in- charge

Supply and fixing in repair roller/venetian blinds vertical/horizontal type made out of standard cloth of approved texture with necessary accessories etc complete all as specified and directed by the Engineer-in- charge

Taking down chowkats or frames exc 1.5sqm but n.exc 4 sqm each but with shutter (without taking off shutter from the frame) complete all as specified and directed by the Engineer-in- charge

-ditto- as per Item no 10.00 but n.exc 1.5 sqm complete all as specified and directed by the Engineer-in- charge

Material and labour powder coated Aluminium frame and shutter for doors, sliding windows & ventilators (moveable louvers type) and for prtitions with one or more rebates including joining cleat for fixing etc. Rubber gasketing all round the panels/ shutters to fix glass, PVC gasketing in all channels, locking arrangement, (minimum thickness of powder coating 50micron)complete all as specified and directed by the Engineer-in- charge

Supply and fixing in repairs 5mm thick glass sheet one side frosted ordinary quality and glazing with in square, n exc 0.5 Sqm in each pane, fixed to Aluminium windows/ventilator complete all as specified and directed by the Engineer-in- charge

Supply and fixing in repairs 5mm thick glass sheet one side frosted ordinary quality and glazing with in square, exc 0.5 Sqm in each pane, fixed to Aluminium windows/ventilator complete all as specified and directed by the Engineer-in- charge

Supply and fixing in repair aluminum anodised GRILL fixed with suifable 'F' section No. 8584 15.30 x 23.40 x 1.40mm fabricated and rivetted to aluminum windows, complete all as specified and directed by Engr-in-charge.

Taking down cement plaster or cement lime plaster on brick on stone walls etc including raking out joint, hacking for key, scrubbing down with water etc complete all as specified and directed by the Engineer-in- charge

Material and labour for rendering 20 mm thick on fair faces of brick/concrete surfaces with two coats i.e (15 mm thick backing coat in CM (1:6) and 5mm thick finishing coat in CM (1:4)) ,mixed with 3% integral water proofing compound as per manufacturers instructions, finished even and smooth without using extra cement including all safety and scaffolding complete all as specified and directed by the Engineer-in- charge (WPC Shall be measured and paid seperately)

Material and labour for new or previously untreated surfaces of any description & applying two coats of acrylic (antifungal) exterior grade paint of over one coat of primer on wall/roof complete all as specified and directed by the Engineer-in- charge

Material and labour rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth (with out using extra cement) including Sagol finish complete all as specified and directed by the Engineer-in- charge

Material and labour for rendering 5mm thick in CM 1:3 on ceiling surface finishing the surface even and smooth complete all as specified and directed by the Engineer-in- charge

Material and labour for preparing plastered new surfaces of ceiling and applying three coats of white wash on ceiling surface complete all as specified and directed by the Engineer-in- charge

Material and labour for preparing new plastered surfaces of walls and applying two coats of oil bound distemper with priming plastered and other surfaces with alkali resistant primer with 3mm thk wall care putty on plastered surfaces complete all as specified and directed by the Engineer-in- charge

Material and labour preparation of new plastered surface of ceiling and applying two coat of oil bound distemper on ceiling with alkali resistant primer including all safety and scaffolding complete all as specified and directed by the Engineer-in- charge

Material and labour prepration of old plastered / decorated surfaces of walls and applying two coat of oil bound distemper on plastered/decorated wall surfaces complete all as specified and directed by the Engineer-in- charge

Material and labour for preparation of newly plastered or un plastered wall surfaces, over 10cm girth, applying two coats of 100% acrylic exterior grade paint all as specified and directed by the Engineer-in- charge and as per manufacturer's instruction.

Material and labour for preparation of old wall surfaces of any description & applying one coats of acrylic (antifungal) exterior grade paint on wall/roof including necessary scaffolding complete all as specified and directed by the Engineer-in- charge

Taking down eaves gutters and rainwater pipes( any size or pattern) , including all fittings, heads, shoes, bends , swan necks, etc, removal to store complete all as specified and directed by the Engineer-in- charge (measured overall as fixed along the centre line over fittings and accessories).

Supply and fixing 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed by the Engineer-in- charge

Supply and fixing for PVC (SWR) bends any radius 110mm bore complete all as specified and directed by the Engineer-in- charge

Material and labour for 100mm dia cast iron soil waste and vent pipes (sand cast pipes) in any length with or without ears with cement joints fixed to walls or laid in trenches etc complete all as specified and directed by the Engineer-in- charge

Material and labour for 75mm bore cast iron soil waste and vent pipes (sand cast pipes) in any length with or without ears with cement joints fixed to walls or laid in trenches etc complete all as specified and directed by the Engineer-in- charge

Supply and fixing 75mm dia CI bends (any radius) diminishing pieces or trapers (larger bore measured) fitted with oval access doors complete all as specified and directed by the Engineer-in- charge

Supply and fixing 100mm dia CI bends (any radius) diminishing pieces or trapers (larger bore measured) fitted with oval access doors complete all as specified and directed by the Engineer-in- charge

Supply and fixing in repair 75mm dia of outler cast iron nahani trap , with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed by the Engineer-in- charge

Supply and fixing in repairs 100mm dia of outler cast iron nahani trap , with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed by the Engineer-in- charge

Supply, laying, connecting and test GI Tubing,15mm dia. medium grade with all fittings and fixed complete to wall and ceiling or laid in floor completeincluding taking down of existing pipeline complete all as specified and directed by the Engineer-in- charge

Supply, laying, connecting and test GI Tubing, 20mm dia. medium grade with all fittings and fixed complete to wall and ceiling or laid in floor completeincluding taking down of existing pipeline complete all as specified and directed by the Engineer-in- charge

Supply and fixing in repairs of vitreous china urinal, half stall type complete including providing and fixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugs with and including 60 mm brass screws, pointing around urinal back in cement , fixing with automatic flushing system with brackets, flush pipes, inlet ,outlet etc complete all as specified and directed by the Engineer-in- charge

Supply and fixing in repairs 32mm dia PVC waste pipe for WHB and urinalscomplete all as specified and directed by the Engineer-in- charge

Supply and fixing in repairs fancy type bib taps, chromium plated cast copper alloy 15mm bore with crutch or butter fly handle, screwed down, & fixed complete all as specified and directed by the Engineer-in- charge

Supply and fixing in repairs 15mm size Stop Valves fancy type chromium plated screwed down high pressure with crutch or butterfly handle handle screwed both ends complete all as specified and directed by the Engineer-in- charge

Supply and fixing fixed in repairs Wash hand basin vitreous china (flat back) size 550 x 400 mm including brackets for fixing purpose, waste brass chromium plated with long screwed shanks and fly nuts 32 mm size including bottle trap complete all as specified and directed by the Engineer-in- charge

Supply and fixing fancy type pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed in repairs of 15 mm bore pipe etc complete all as specified and directed by the Engineer-in- charge

Supply and fixing in repairs vitreous china water closet (Squatting pan) “Orissa” pattern of size 580 x 440 mm white with integral foot rest and ‘P’ trap (excluding flushing cistern) but including PVC flush pipe and provision of lime concrete bedding as complete all as specified and directed by the Engineer-in- charge

Supply and fixing vitreous china wash down water closet pan (Pedestal pattern), white (excluding flushing cistern and flush pipe) fixed as in repairs complete all as specified and directed.

Supply and fixing in repair for seat cover for pedestal pan with plastic water closet seat , black or white, closed pattern with flat bottom and cover amnd mild steel chromium plated or aluminised hinging device complete all as specified and directed.

Supply and fixing in repairs for 10 litre capacity PVC valveless syphonic action type flushing cistern high or low level (exclusive of brackets) white with inlet ball valve, float and handle inlcuidng brackets complete all as specified and directed.

Supply and fixing brass Chromiun Plated towel rail, 20mm dia, D type , 60 cm long between flanges fixed in repairs complete all as specified.

Supply and fixing toilet paper holder of viterous china box type white coloured fixed to walls withchromium plated brass screws CP brass fixed to walls etc, fixed in repairs complete all as specified and directed.

Supply and fixing in repairs brass CP shower rose 125mm size complete all as specified and directed.

Supply and fixing in repairs sinks with drainage bard made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwar wall or including fxing cantilever brackets and connecting uinon to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed

Supply and fixing in repairs for providing 15 mm dia PVC connection of length 450mm long complete all as specified and directed by the Engineer-in- charge

Taking down shutters of any description exc 1 Sqm but nexc 2 sqm complete all as specified and directed by the Engineer-in- charge

Supply and fixing mild steel flat iron 25 x 3 mm such as in hold fast etc or similar small articles conforming to Fe- 410-0 or 310-0 complete all as specified and directed by the Engineer-in- charge

Supply and fixing 100 mm Butt hinges, mild steel, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified and directed by the Engineer-in- charge

Supply and fixing 200mm long aluminium anodized barrel tower bolts of extruded sections complete all as specified and directed by the Engineer-in- charge

Supply and fixing 300mm long aluminium alloy, anodized sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet cost of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloycomplete all as specified and directed by the Engineer-in- charge

Supply and fixing solid PVC door frame of size 50mmx 47mm made out of 5mm wood grains printed PVC sheet reinforced with ms square tube and edges painted to match with printed sheet complete all as specified and directed by the Engineer-in- charge

Supply and fixing factory made solid panel PVC door shutter 30 mm thick (styled) consisting of frame made out of MS tube for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ,C" channel having a PVC sheet strip of 20mm width stuck in side with salvent cemet for stiles and plain colour PVC sheet for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet bedding and jointed together with solvent cement suppling and fixing in the frame at site complete all as specified and directed by the Engineer-in- charge

Supply and fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.4mm complete all as specified and directed by the Engineer-in- charge

Supply and fixing in repairs 4 mm thick bakelite sheet with decorative choice laminated on both side complete all as specified and directed by the Engineer-in- charge

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by the Engineer-in- charge

Material and labour for mild steel Framed work such as grills, gratings, sun shed etc with ends of bars shouldered and/or riveted or welded, or forged into spikes, framed guard bars, barred iron doors, ladders, farmed balastures, walk ways, railings, frame work of water tanks and similar work conforming to Fe-410-0 or Fe-310-0 complete all as specified and directed by the Engineer-in- charge

Material and labour for preparing new or previously untreated surface of steel of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Supply and fixing expanded metal, weight n exc 4.00 Kg per sqm bent to shape required and tying with and including annealed mild steel wire not less than 0.90mm dia or fixing with galvanised steel staples suplied and fixed complete to wood or steel members, complete all as specified and directed by the Engineer-in- charge

Demolition of stone/brick masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings dressed stone work and pre cast concrete articles complete all as specified and directed by the Engineer-in- charge

Material and labour brickwork with sub class 'B' bricks , straight or curved on plan exc 6m mean raidus built in cement mortar 1:6 complete all as specified and directed by the Engineer-in- charge

Ditto All as per item No. 68.00 above but half brick thick wall built in CM 1:4. complete all as specified and directed by the Engineer-in- charge

Material and labour for water proofing treatment of sunken floor/wall surfaces by applying two coats of water proofing chemical and cement mix in ratio 1:1.5, complete including PCC 1:7:12 type F2 using 40mm graded crushed stone as in filling all as per manufacture's instructions complete all as specified and directed by the Engineer-in- charge

Supply and fixing vitreous china water closet, couple closet, complete with and including all accessories, fixed in repairs complete all as specified and directed by Engineer-in-Charge

Supply and fixing vitreous china wash basin, of size complete with and including all accessories, fixed in repairs complete all as specified and directed by Engineer-in-Charge

Supply and Fixing in repair Chrome Plated towel rail 600mm long complete all as specified and directed by Engineer-in-Charge

Supply and Fixing in repair Chrome Plated Toilet roll holder complete all as specified and directed by Engineer-in-Charge

Supply and Fixing in repair Chrome Plated towel ring round complete all as specified and directed by Engineer-in-Charge

Supply and Fixing in repair Chrome Plated soap dish complete all as specified and directed by Engineer-in-Charge

Supply and Fixing in repair health faucet with jet spray, 1.5 metre long, cast copper alloy, nickel chromium plated finish, 15 mm bore, 100 mm long with 1.5 metre long stainless steel shower hose and mounting device attached complete all as specified and directed by Engineer-in-Charge

Demolition of plain cement concrete of any description and in any position not other wise specifically provided , in roof etc all as specified and directed by EIC.

Demolition of RCC, RCC over head water storage tank of any capacity and any description in any position of top up the roof and necessary cutting to column, beam and removing the site.

Material and labour for brushing neat cement slurry with 3.0 kg of cement per Sqm on cleaned and washed concrete surfaces and like all as directed by Engineer-in-charge.

Material and labour for wire brushing and cleaning top surface of roof , lime terracing or cement concrete including flashings and junction of parapets, etc., and surface painting, with a layer of blown grade bitumen of any penetration applied hot @ 1.7 kg per sq.m, blinded with grit or pea size gravel @ 0.006 cu.m per sq.m, and lightly tampered (area of flashings, etc., shall be added to the roof area) complete all as specified and as directed.

Material and labour for laying chicken wiremesh of galvanised steel 0.7mmdia of wire having mesh size 25x25 fixing by using battens complete all as specified and as directed.

Material and labour PCC (1:2:4) type B-1 (Using 20mm graded stone aggregate) as in roof/chajja padding for maintaining roof/chajja slope with 3% water proofing compound in weight of cement complete all as specified and as directed. (Note : Water proofing compound shall be measured and paid seperately).

Material and labour for providing water proofing treatment with five layered 4mm thick APP (Atactic Polypropylene) modified bituminous membrane re-inforced with no woven polyester mat of weight not less than 180 gms/Sqm as centre core and without multiple layers of polythene finished on top and bottom with 7 micron thick flammable polythylene applied by thermo fusion using LPG torch on bottom portion of the membrane after applying a coat of bituminous primer @ 0.25 Kg/Sqm over roof and over the APP membrane provide a polypropylene/ polyester, Non woven geotextile fabric of 150 gsm over the geo textile fabric (An overlap of 100mm at end & 75mm shall be provided on sides ends respectively) etc complete all as specified and directed by the Engineer-in- charge . The membrane shall be inserted in the wall at the height of 800 mm by cutting groove in the wall finished by membrane flashing.

Material and labour for rendering 20mm thick cement plaster in CM (1:3) on roof top surface finished even and fair including WPC by weight of 3% of total weight of cement in concrete complete all as specified and directed by the Engineer-in- charge. Note : WPC will be measuerd separately.

Supply only integral water proofing compound complete all as specified and directed by the Engineer-in- charge

Material and labour for cement concrete tiles 25CmX25CmX22 mm thick, machine pressed,(with grey cement & no pigments), set jointed and pointed in neat cement slurry in floors over and including 15 mm thick bedding layers in CM 1:3 complete all as specified and directed by the Engineer-in- charge

Material and labour for rendering 15mm thick cement plaster in CM (1:3) on roof top surface finished even and fair including WPC by weight of 3% of total weight of cement in concrete complete all as specified and directed by the Engineer-in- charge. Note : WPC will be measuerd separately.(2-41)

Supply and fixing 50 mm dia medium grade galvanized steel tubing fixed to walls, ceilings or laid under floors including cutting of RCC wall etc all as specified and directed complete all as specified and directed by the Engineer-in- charge

Material and labour for PCC 1:7:12 type F2 using 40 mm graded stone aggregate as in filling (sunken portion). etc complete all as specified and directed by the Engineer-in- charge

Material and labour for providing 12 mm dia holes of 75mm deep @0.6 m c/c at junction of beams and columns as co-ordinal points for inserting/pouring mixture of resin base latex polymer and cement slurry by pressure grouting for column, beams and slabs, includind sealing the holes with CM 1:3, complete all as specified and directed by the Engineer-in- charge

Supply and fixing 32 mm thick flush shutter solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by the Engineer-in- charge

Supply and fixing for 1st class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed by the Engineer-in- charge

Material and labour for 12 mm thick pre-laminated Medium Density board,both side decorative lamination interior grade,fixed in aluminium/ wooden frame work complete all as specified and directed by the Engineer-in- charge

Material and labour for PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate, using Pidiproof LW+ water proofing chemical of Dr. Fixit or equvalent as per manufacturer's instruction , as sub floor, 40mm thick complete all as specified and directed by the Engineer-in- charge (Water Proofing Chemical shall be measured and paid separately)

Material and labour for RCC Type B1 1:2:4 using 20 mm graded stone aggregate slab supported on wall, beam and coulumn, roof, landings, balconies, canopies, deck slabs and in shelves and the like including all necessary form work complete all as specified and directed by the Engineer-in- charge

Material and labour for TMT mild steel bars,10 mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-S or Fe-410-0 complete all as specified and directed by the Engineer-in- charge

Supply and fixing 50mm, low density polyethylene pipes (LDPE) of pressure rating 6 kgf/Sqcm fixed complete to walls, ceilings or in floors etc complete all as specified and directed by the Engineer-in- charge

Supply and fixing 160mm dia PVC ( SWR) grade pipes single socketed in any length with rubber ring joints fixed to walls with and including fixing clips, bends, elbow, shoes bends etc complete all as specified and directed by the Engineer-in- charge (Note:- Measurment shall be taken along the centre line of the pipes.)

Supply and fixing for PVC (SWR) bends any radius 160mm bore complete all as specified and directed by the Engineer-in- charge

Material and labour for Hard wear stone (of any type) granite stone slab 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types and including 15mm thick screed bed in CM 1:4 complete all as specified and directed by the Engineer-in- charge

Supply and fixing 12mm thick, toughened glass for door shutters, partitions, sheves etc with and including fitting and fixtures such as glass handles ss studs, fittings for door pivots etc complete all as specified and directed by the Engineer-in- charge

Material and labour for double action floor spring hydraulically regulated made up of minium 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as per manufacturer's instruction complete all as specified and directed by the Engineer-in- charge

Supply and fixing false ceiling with powder coated exposed GI grid suspension system (E-Grid T-2430 or equvalent load carrying capacity with mid span deflection not exc. 1/360 span with hanger spacing of 1200mm c/c) consisting of main runner 3600mm long, cross Tee 1200mm/600mm long and wall angle. The main runners to be placed @ 1200mm, the cross Tee 1200mm will be inserted in the pre cut slots of main runner at a regular interval of 600mm to form a modular grid of 1200mmX600mm. Additional cross Tees of 600mm shall be placed perpendicular to the cross tee 1200mm long to finally form a grid of 600mmX600mm. Grid of modular size 600mmX600mm shall be supported by 6 mm dia G.I. wire from purlins/soffit with and including 6mm thick high pressure steam cured non asbestos fiber cement designer ceiling board (Density>1200Kg/Cum) of size 595mmX595mm, confirming IS 14862 & Type B Category III of ISO 8336, tested as per AS 1530 part 3 & BS-476 Part 4, 5, 6, 7 & 8, complete all as per manufacturer's instruction complete all as specified and directed by the Engineer-in- charge

Material and labour for 20-25mm thick, machine cut, Kota stone slab, as in floors, steps, landing etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of slab, including cutting, polishing etc. with and including 20mm thick screed bed in CM 1:4 complete all as specified and directed by the Engineer-in- charge

Supply and fixing in repairs PVC 3 to 5 mm thick wall panelling including cutting, moulding, angle cleat, nails, screws, Tee section, etc all as complete all as specified and directed by the Engineer-in- charge

Errection & dismantling of MS tubular double scaffolding (H frames) upto ht of 30 m & with necessary brassing, provision of necessary safety equipment to the skilled workers to carry out the work and covering with green cloth for carring out external facework of walls complete all as specified and directed by the Engineer-in- charge

Removing excavated/demolised material & debris exc. 1.50 Km but n exc. 25 Km and depositing where directed, in soil complete all as specified and directed by the Engineer-in- charge

Complete removal of existing water proofing treatment of any description in any position upto concrete surface including cleaning, wire brushing, watering, removal of debris upto 15 Km distance complete all as specified and directed by the Engineer-in- charge

Material & labour for removing carefully concerete works by low impact hammer ,breakar with out damaging the structure and cleaning and disposal of debries out side the premises. etc complete all as specified and as directed.Hard concerete should not be removed by force complete all as specified and directed by the Engineer-in- charge

Material and labour for rendering 20 mm thick pre polymer modified ready mixed cement based plaster in two coats 12 mm thick base coat and 8 mm thick finishing/final coat. Polymer modified ready mixed cement based plaster should having minimum composition of cement & sand 1:4 using fully treated dry, well graded natural sand conforming to IS-383 suitable for external plastering having low rebound properties, low water demand for curing properties, mechnical mixing with water in a matalic tray only to made good, consistency as per the specification of the manufacturer and applied over exterior masonry and concrete surfaces incl using richer mix for making corners if necessary incl making grooves of existing size and necessary two legged MS pipe scaffolding as wherever required incl curing required upto G plus 3rd floor bldg complete all as specified and directed by the Engineer-in- charge

Supply and fixing for sheet glass 4mm thick quality fixing to wooden door/aluminium window shutters in any position with new beads/ steel section as required for securing complete all as specified and directed by the Engineer-in- charge

Supply and fixing Powder coated Aluminium three track sliding type glazed window shutter with 5 mm thick plain sheet glass fixed open track section 100x38x1.5mm having three track (two of glass & one of stainless steel wirecloth of 0.36mm nominal dia of wire and average width of aparture 1.40mm) with members of window shutters of section 38x12x1.5mm and other standard sliding section incl all necessary fiber wheel rollers suitable handls to facilitate sliding and all necessary jointing cleats glazing clips rubber packing, aluminium snap beading etc complete all as specified and directed by the Engineer-in- charge Note : Cost of other consumables required for the item shall be deemed to be included in the quoted rate Glass panes /wire Cloth / lock /handle

Supply and fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, fixed with self tapping screws complete all as specified and directed by the Engineer-in- charge

Supply and fixing rolled mild steel sections of Grade Fe 410-W, (Gde- E-250) quality-A, as in for Roof trusses (framed), trussed, purlins, crane gantries, rafters, post, runner, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed by the Engineer-in- charge

Taking down 15mm bore, GI tubing and connections including cleaning for refixing or removal to store complete all as specified and directed by the Engineer-in- charge

Taking down 20mm bore, GI tubing and connections including cleaning for refixing or removal to store complete all as specified and directed by the Engineer-in- charge

Dismantling 100/75 mm bore,Cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches if required complete all as specified and directed by the Engineer-in- charge

Material and labour for PCC 40mm thick type B-1 (1:2:4) using 20mm graded crushed stone as in floor finish cement concrete surface complete all as complete all as specified and directed by the Engineer-in- charge

Supply and fixing for 140mm long floor door stopper of aluminium alloy body and tonge, anodised with hand drawn steel spring fixed in floor complete all as specified and directed by the Engineer-in- charge

Material and labour 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by the Engineer-in- charge

Supply and fixing in repair for oval shaped coloured vitreous china WHB table top fancy type of over all soze 595x380mm of cera make or equivalent including 32 mm CP waste coupling, PVC waste pipe etc including granite slab counter of black colour as approved and of size 1.20 mtr x 0.60 mtr including grounding edges etc and cutting nitches rounding edges etc complet, horizontally supported by 01 nos of 35 mm thick cuddappa stone slab one side mirror polished and vertically supported by 02 Nos 35 mm thick complete all as specified and directed by Engr-in-Charge.

Supply and fixing PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed by the Engineer-in- charge

Material and labour for preapring new plastered surfaces of walls and applying 2 coats of oil bound distemper over a coat of chalk whitening on plastered surfaces complete all as specified and directed by Engr-in-Charge.

Material and labour rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth (with out using extra cement) including Sagol finish,including WPC complete all as specified and directed by the Engineer-in- charge

Material and labour for false ceiling made out of 600 x 600 x 4 to 6 mm thick ceiling boards / tiles deep panel suspensor system made out of powder coated GI sheet main T of size 23.5 x 40 x 0.63mm and angle of size 19 x19 x0.63mm including 3 mm GI wire for suspending holts for securing frame work making necessary projected pattern complete all as specified and diected by Engineer in charge.

Material and labour for preparing plastered surface of roof slab, chajjas etc , by brooming with broom sweeping free from dust etc and evenly applying a coat of approved bituminous primer @0.20 Kg/Sqm of area complete all as specified and directed by the Engineer-in- charge

Taking down old U/S tube light fitting single/twin ,Recess mount fitting , etc and making good the distributed surface matching with existing surface all as per directed by Engineer in charge

Taking down old U/S MCB DB s complete with MCBs , isolator etc of any capacity from wall/ceiling and making good the distributed surface matching with existing surface all as per directed by Engineer in charge

Taking down carefully old U/S point wiring copper/Aluminum (light/ fan /sockets/power) complete with switches, sockets, ceiling roses, lamp holders, brackets, ,removing material to store for keeping in safe custody and making good to disturbed surfaces complete all as specified and directed by the Engineer-in- charge

Material & Labour point wiring complete with 1.5 Sq.mm single core multistranded PVC insulated & unsheathed copper conductors cable 1100 volts FRLS grade ISI make and drawn through & including PVC Conduit 20mm bore, heavy grade with Accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI make terminal boxes fixed on wall including one PVC insulated & unsheathed multistranded copper conductor 1.5 Sqmm FRLS grade as earth continuity conductor connected to common earth dolly incl suitable sizes moduler boxes with cover plate for mounting the moduler switches/regulators/sockets complete all as specified and directed by the Engineer-in- charge.Notes: a) Colour coding shall be followed as given below:- i) Phase - Red ii) Neutral - Black iii) Earth - Green

One light controlled by one 5A switch

One fan point controlled by one 5A Switch

One 5A flush type switch socket point on same board board

One 5A flush type switch socket point on independent board

One bell point controlled by one 5A Switch

Material & Labour point wiring complete with 4 Sq.mm single core multistranded PVC insulated & unsheathed copper conductors cable 1100 volts FRLS grade ISI make drawn through & including PVC casing caping of 25mm width with Accessories fixed on wall/ceiling/truss etc with metallic ISI make terminal boxes fix on wall including one PVC insulated & unsheathed multistranded copper conductor 4.0 Sqmm FRLS grade as earth continuity conductor connected to common earth dolly for single board having 2 x 5 Amps and 1 x15 Amp switch socket point on the same board complete including moduler box and cover plate complete all as specified and directed by the Engineer-in- charge Notes:- a) Colour coding shall be followed as given below:- i) Phase - Red ii) Neutral - Black iii) Earth - Green

Disconnecting & taking down, strip opening, cleaning all parts and packing of ceiling fan/wall mounted fan of any make and size & greasing ball bearing with specified quality grease including Preparation of painted surfaces of ceiling fan & applying one coat of synthetic enamel white paint by spray painting complete & re-comissioning the same including making electric connection complete all as specified and directed by the Engineer-in- charge Note : Old damaged unserviceable fan handed over to dockyard authority.

Supply and fixing in repair new generation recessed LED 2X2 Luminaire 36 watt for modern offices and CRCA powder coated body and high translucent diffuser provides high quality ecomonic energy saving lighting to modern offices. Suitable for 600 x 600 mm modular/POP/Gypsum ceiling complete all as specified and directed by the Engineer-in- charge

Supply and fixing in repair new generation 20W 4F LED batern for surface and pendent application, anodized extruded aluminium housing, high transmissitvity diffuser high lumen output complete fixing arrangement complete all as specified and directed by the Engineer-in- charge

Supply & Fixing in repair sub main wiring for circuit of size 2 x 6 sq mm single core (FRLS) alongwith earth wire of 6 sq mm single core of FRLS PVC insulated unsheathed cable, 1100 volts grade with multistranded copper conductor including PVC conduit of suitable size complete all as specified and directed by Engr-in-Charge.

Ditto All as per item No. 137.00 above but of size 2 X 4.0 sqmm + 1 x 4.0 sqmm size in pvc casing caping of suitable size complete all as specified and directed by Engr-in-Charge.

Disconnecting & taking down old Unservicable cable & Supply laying & testing cable XLPE insulated screened, PVC bedded galvanised steel strip or wire armoured electric power cable (heavy duty) 100 volts grade with stranded aluminium conductor of size 50 sqmm 3.5 core complete all as specified and directed by the Engineer-in- charge

Supply & Fixing in repair MCB DB double door SPN 12 Way with 200 Amps rated copper bus bar complete all as specified and directed by the Engineer-in- charge

Supply & Fixing in repair MCB DB double door SPN 8 Way with 200 Amps rated copper bus bar complete all as specified and directed by the Engineer-in- charge

Supply & Fixing in repair sheet metal enclosure TPN DB VTPN 6 Way,415V with 250A copper busbar, double door type IP-54, IK-09 protection suitable for housing MCCB 100Amp 4 pole all as specified and directed by EIC. Note : DBs shall be conceeled in wall where ever posible including making good the surface to match with surrounding complete all as specified and directed by the Engineer-in- charge

Supply & Fixing sheet metal enclosure TPN DB VTPN 8 Way,415 V with 250A copper busbar, double door type IP-54, IK-09 protection suitable for housing MCCB 200Amp 4 pole all as specified and directed by EIC. Note : DBs shall be conceeled in wall where ever posible including making good the surface to match with surrounding complete all as specified and directed by the Engineer-in- charge

Supply & Fixing in replacement of MCB (SP) 6 to 32 Amps capacity, C Curve type suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA including making connection complete all as specified and directed by the Engineer-in- charge

Supply & Fixing in replacement of MCB, SPN 40 TO 63 Amps capacity, C Curve type suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA including making connection complete all as specified and directed by the Engineer-in- charge

Supply & Fixing MCCB 4 P 125 Amps,16KA, complete all as specified and directed by the Engineer-in- charge

Supply & Fixing ceiling rose surface bakelite 65 x 50mm, flush type, 3 terminals complete all as specified and directed by the Engineer-in- charge

Supply & Fixing modular switch 1 way 6A complete all as specified and directed by the Engineer-in- charge

Supply & Fixing modular socket, 6A - 2/3 pin combined 2 modules complete all as specified and directed by the Engineer-in- charge

Supply & Fixing modular switch socket combination 16A, 3 module complete all as specified and directed by the Engineer-in- charge

Supply & Fixing for modular fan regulator fan step regulator, 120W - 2 modular step type complete all as specified and directed by the Engineer-in- charge

Supply & Fixing single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 32 Amp complete all as specified and directed by the Engineer-in- charge

Supply and fixing switch piano, modular type 1 way 6 Amps 1 module 240 volts flush type complete all as specified and directed by the Engineer-in- charge

Supply and fixing switch piano, modular type 1 way 16 Amps 1 module 240 volts flush type complete all as specified and directed by the Engineer-in- charge

Supply and fixing bell push, modular type 1 way 16 Amps 1 module 240 volts flush type complete all as specified and directed by the Engineer-in- charge

Supply and fixing bell ding dong, 230 volts, AC complete all as specified and directed by the Engineer-in- charge

Supply and fixing in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as specified and directed by the Engineer-in- charge. (Note : The cost of removing old wooden box and making good of surface i.e. brick work, plastering etc is included in quoted rate)

Supply and fixing ceiling fan 1200 mm BLDC, 5 star rating sweep 230 volt 50 HZ AC, having air delivery not less than 200cum/min, 350 rpm supply single phase incl down road as per site requirement and all conncted accessories incl taking down and submitting to MES store complete all as specified and directed by the Engineer-in- charge

Supply and fixing MCCB 4pole 100A, 16kA complete all as specified and directed by the Engineer-in- charge

Supply and fixing MCB SP 40-63 Amps, 10 KA Rupturing capacity complete all as specified and directed by the Engineer-in- charge

Supply , fixing, testing in repairs of JEF ECO SAFE Maintenance Free Grounding Solution set comprising of High tensile low carbon steel rod of 3 Mts length & 25 mm dia with 250 micron ( avera Schneider ) molecularly bonded copper on the outer surface to confirm with requirements of UL467 along with Back-fill compound strictly be a Carbon based conductive concrete type which has a resistivity of less than 0.12 Ohm Mtr as per Clause 14.5D of IEEE : 80 standard. Back-fill compound should be electronically conductive ( Like in metals ) and should not depend on moisture for conduction. JEF Powerfill Loresco compound shall be supplied in 50 Pound Bag. ( 1 Bag of 50 Pounds required per earthing set). Back-fill comound should be environment friendly, should solidify when mixed with water and set like concrete and should not leach / diffuse into the ground. A suitable earth terminaton clamp should also be supplied along with the set alongwith earth pit weatherproof incl complete all as specified and directed by the Engineer-in- charge Note : Back-fill compund shall not be mixed with any soil while pouring in the bore hole.

Material and labour for 4mm GI wire earth continuity conductor or main earthing lead fixed to wall or buried in ground and fixed to panel/transformer alongwith 20mm GI pipe light grade for protection complete all as specified and directed by the Engineer-in- charge

Supply and fixing wall mounted fan 400 mm sweep 240 volt 50 HZ AC, as per site requirement and all connected accessories and civil work.incl taking down and submitting to MES store complete all as specified and directed by the Engineer-in- charge

RAJENDRA CONSTRUCTION

ROY CONSTRUCTION CO