White Washing of Quarter XEN Office Safidon

Amount

Dismantling Brick Work, Tile Masonry or Tile Lining and Tile Terracing in cement as per HSR Item NO. 8.5 b

Dismantling reinforced cement concrete with cleaning and straightening and cutting of bars if required as per HSR Item No. 8.6 (e)

Scraping cement plaster as per HSR Item No. 8.32 ( c )

Preparation of plastered surfaces for oil bound distemper including sand papering the surface, applying one coat of linseed oil. and filling with approved quality filler consisting of white lead, linseed oil, varnish and chalk mitti including finishing the surface to the required finish complete as per HSR Item No 16.52

Finishing walls with exterior decorative cement based paints, such as snowcem Robbiacem etc. on old work, one coat to give an even shade. As per HSR Item NO. 16.62

Scraping white wash and colour wash as per HSR Item No. 8.32 a

Distempering with washable oil bound distemper (of approved manufacture) two coats over one priming coat on new work as per HSR Item NO. 16.58

Applying priming coat with cement primer in all shades on newly plastered or concrete exterior surfaces. As per HSR Item NO. 16.25

Providing & laying average 6mm thick POP Coating on walls, Ceiling, beams and lintels etc. complete in all respects as approved by the Engineer-ln-Charge as per HSR Item NO. 13.94

Applying priming coat with metal primer on new steel or iron work including preparation of surface as per HSR Item NO. 16.9

Painting two coats with ready mixed paint for metallic surfaces in all shades on old steel or iron work complete as per HSR Item No. 16.18

Applying pink primer or aluminium priming coat on wood work including preparation of surface, knotting and stopping etc. As per HSR Item no. 16.2

Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade.. as per HSR Item NO. 16.3

12 mm thick cement plaster 1:4 complete as per HSR Item No. 15.5

Pressed steel sheet frames (chowkats) consisting of 2 mm thick steel sheet of the specified section, including iron lugs (hold fasts) iron hinges, conforming to RW.D. specifications, including bolts for fixing stops, locknotch, provision for receiving tower bolts, and finished with one coat of readymixed paint red lead non-setting primer, of approved quality, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame, and cement concrete 1:3:6 for lugs complete (a) door and window frame of size 89 mm x 50 mm with 40 mm wide single rebate as per HSR Item No. 18.34 (a)

Pressed steel sheet frames (chowkats) consisting of 2 mm thick steel sheet of the specified section, including iron lugs (hold fasts) iron hinges, conforming to RW.D. specifications, including bolts for fixing stops, locknotch, provision for receiving tower bolts, and finished with one coat of readymixed paint red lead non-setting primer, of approved quality, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame, and cement concrete 1:3:6 for lugs complete (C) door and window frame size 127 mmx 50 mm with 40 mm wide double rebate as per HSR Item No. 18.34 (C)

Wire gauze commercial hard wood such as hollock, champ, chikrassy etc. (non-coniferous timber other than teak conforming to I.S. specification No. 1003 kiln seasoned) door and window shutters without springs housed in chowkats including chocks, iron hinges and screws, etc., complete fixed in position (excluding the cost of tower bolts, and handles but including the labour for fixing the same 30 mm thick asc per HSR Item No. 17.31 (A)

Cost of iron fittings, complete for doors and windows, such as tower bolts, handles etc. and screws for these fittings (excluding sliding bolts)(a) for single leaf shutter as per HSR Item No. 17.71 (a)

Supply and erection of pipe of 1.60 mm thickness recessed in wall and complete with M.S. boxes for housing regulators wall sockets switches etc. as per HSR Item 31.4

(i) (b) Fan Point

(ii) (a) Light Point

(ii) (b) Light Point

(vii) (a) 3 Pin 5 Amp plug Point

Wiring only in 1.5 sq. mm PVC aluminium conductor cable in existing conduit pipe and M.S. boxes covered with 5 mm thick bakelite sheet including cost of switches, wall socket, ceiling rose etc. as per HSR Item NO. 31.5

(i) (b) Fan Point

(ii) (a) Light Point

(ii) (b) Light Point

(vii) (c) Light Point

(viii) (a) 3 Pin 5 Amp plug Point

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE (as approved by the Engineer-in-charge) EUROPEAN TYPE WATER CLOSET SUITE, SYPHONICTYPE consisting (a) Single trap syphonic W.C. Suite (ii) White colour as per HSR Item no. 30.5 A (i)

Providing and fixing in position best Indian make (ordinary) lavatory suites consisting of Lavatory in vitreous chinaware size as given below (to the approval of the Engineer-in-charge) including China plug for tap hole where necessary Single Colour As per HSR Item No. 30.41 (v)

Providing and fixing in position best Indian make Pedestal fittings of vitreous chinaware complete (as required by the Engineer-in-charge) as per HSR Item No. 30.44 (ii)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE SHOWER CP. BRASS ROSE-SHOWERS 125 mm i/d as per HSR Item No. 30.66 B (ii)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE TOWEL RAILS FIXED in with rawls lugs embedded in walls with CP. brass screws, complete in all respect INCLUDING CUTTING AND MAKING GOODS THE WALLS ETC as per HSR Item No. 30.68 (c)

Providing and fixing in position best Indian make soap dish fixed into wall with C.P. brass screws and complete in all respects including cutting and making goods the walls etc as per HSR Item No. 30.70 (a) (i)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE BEVELLED EDGE 5.5 MM THICK MIRROR mounted On ASBESTOS Sheet GROUND FIXED IN POSITION BY MEANS OF 4 NOS. CHROMIUM PLATED BRASS SCREWS AND WASHERS over rubber washers and rawl plug embeded in the wall or chromium plated brass clamps with C.P. brass screws (as required by the Engineer-in-charge) COMPLETE INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC. INDIAN MAKEas per HSR Item No. 30.71 A (i)

Providing and fixing in position 15 mm i/d C.P. brass bib cocks of best quality (as required by the Engineer-in-charge). As per HSR Item NO. 30.75 ( c )

Providing and fixing in position C.P. brass stop cocks (as approved by the Engineer-in-charge). As per HSR Item No. 30.76 A (i)

Providing and fixing 15 mm C.P. brass laboratory cock swan neck of best quality (to the approval of Engineer-in-charge as per HSR Item NO. 30.78 A

Cement concrete 1:1.5:3 with stone aggregate 20 mm nominal size in first storey upto 4 metres above plinth level. AS PER hsr Item NO. 10.60

Centring and shuttering for sides and soffits of beams hunchings, girders, bressumers and lintels as per HSR item No. 9.7

Fe-500 EQR TWIT steel bars for RCC, works, where not included in the complete rate of RCC including bending, binding and placing in position complete as per HSR item No. 18.22

Providing & fixing PVC Rain water pipe 6 Kg Pressure of ISI mark in cement mortar during masonry work. As per HSR Item No. 13.89

(a) 100 MM dia PVC pipe 6 Kg. Pressure

(b) 150 MM dia PVC pipe 6 Kg. Pressure.

Providing & fixing PVC Bend ISI Mark As per HSR Item No. 13.90

(a) 100 MM dia PVC pipe

(b) 150 MM dia PVC pipe

Supply of CPVC Pipes (NS Item)

(b) 20 mm i/d

(c) 25 mm i/d

Supply of CPVC TEE Bends & Sockets (NS Item)

(b) 20 mm i/d

(c) 25 mm i/d

LABOUR FOR LAYING, JOINTING, FIXING AND TESTING G.I./ P.V.C/W.I. PIPE LINES AND SPECIALS tees bends, sockets, elbows etc. INSIDE BUILDING and testing etc., complete including cutting threading.As per HSR Item No. 28.18 B

(b) 20 mm i/d

(c) 25 mm i/d

Top khurra 0.6 m x 0.6 m for rain water pipe in 25 mm thick cement concrete 1:2:4 over 50 mm thick cement concrete 1:8:16. as per HSR Item No. 13.50

Bottom khurra on ground 1.2 m x 0.6 m consisting of brick-on-edge laid in cement mortar 1:3 over 75 mm cement concrete 1:8 1:3:16 including 12 mm thick cement plaster as per HSR Item No. 13.57

PVC Insulated wiring in Recessed Conduit 31.1 Wiring in 1.5 sq. mm PVC insulated aluminium conductor cable in 1.6 mm thick conduit pipe as per HSR Item NO. 31.1

I (b) Fan Point

ii (a) Light Point

ii (b) Light Point

vii (a) 3 pin 5 amp plug point

viii (a) 3 pin 15 amp plug point

Pvdg. & fixing ceramic tiles/anti skid tiles of size 400mm x 400mm or above size of approved make in flooring, HSR Item No. 14.91

Providing and fixing vitrified tiles of size 600 x 600mm of approved make in skirting / dado HSR Item No.14.90

Cement concrete 1:3:6 with stone aggregate 20 mm nominal size in first storey upto 4 metres above plinth level HSR Item No. 10.68

Deodar wood door and window shutters including iron hinges, screws, chocks/cleats and stops, etc., complete fixed in position HSR Item No. 17.18 a (ii)

Removing door and windows (wood and steel) with chowkats by making recesses in walls when the wall is not to be dismantled :- HSR Item No. 8.18 I & ii

Dismantling cement conglomerate/terrazzo floors 25 mm to 50 mm thick without concrete base HSR Item No. 8.26

Scraping, brushing to remove paint to bare metal surface.As per HSR Item No. 16.65

D/D credit of dismentled material as per Item No. 1

M/S JAI BHOLE NATH CO-OP L AND C SOCIETY LTD