Repair and Maintenance of Rengali Dam Sub Division No-I and II at Rengali Dam Site

Dismentling G.C.I or A.C. Sheet roofing after carefully removing the bolts and nuts including stacking of the materials for reuse and removing the debris withen 50m lead etc. complete as per the direction of Engineer in Charge

Supplying all Labour T&P and Fitting and fixing of AC sheet roofing, drilling holes in wind ties including fixing of ridges valleys L hhoks wind ties etc complete including cost, conveyance, royalty but excluding GST as per the direction of the Engineer-in-charge.

Providing and laying water proof with polymeric bituminous membrance (Plastic felt of 2.25Kg/Sqm and 1.5mm thickness consisting of layers having center core of 20microns thermo plastic high molecular high density HM HDPE film of grade 2504 including priming the surface with bituminous primer @ 0.3Kg per sqm providing a coat of hot blown bitumen of 1.32Kg per sqm, applying and laying lastic felt membrance with 10cm over lap adhered to blown bitumen of 85/25 or 90/15 grade and covered with a layer of hot blown bitumen @ 1.2Kg/Sqm etc complete but excluding GST and as directed by the Engineer-in-Charge

Providing all materias labour T&P fitting and fixing of double leaf panelled MS Door shutters with M.S frame over all size including frame 1980mm (H) x 1070mm (W) made out of the following materials conforming to relevant I.S.S. Frame- 35X35X6mm MS angle, shutter style- top and bottom rail 25X25X3mm MS angle. Door pannel-1.0 mm C.R sheet. Panel stiffners covering width of each leaf- 19X5mm, MS flat 3 nos on each leaf, Hinges sizes- 100 mm 6 nos (3 nos on each side) bought out as per I.S.S. Hold fast- 35X35X6mm MS angle 175mm length bifurcated at the tip 3 nos on each side. Handle-19X5mm MS flat fabricated- 4 nos. Aldrop- 2 nos. bought out as per I.S.S tower bolt- 2 nos. bought out as per I.S.S. (Approximate weight-54 kg) including cost, conveyance etc complete but excluding GST as per the direction of the Engineer-in-charge.

Providing all materials labour T&P fitting and fixing of MS pannelled window double leaved shutter with MS frame and grill. Over all size including frame- 1220mm (H) X 910mm (W) made out of the following materials conforming to relevant I.S.S. Frame- 35X35X6mm MS angle. Shutter style- Top and bottom rail 25X25X3mm MS angle. Window pannel-1.0 mm CR sheet. Panel stiffners covering width of each leaf- 19X5mm MS flat 2 nos on each leaf. Hinges-size 100 mm 4 nos (2 nos on each side) bought out as per I.S.S. Hold fast- 35X35X6mm MS angle 100mm length bifurcated tip 2 nos (on each side). Handle-19X5mm MS flat 2 nos. fabricated (in side). Tower bolt-4 nos bought out as per I.S.S. Horizontal grills-12mm MS round at 100mm spacing. (Approximate weight 39 kg) including cost, conveyance, etc complete but excluding GST as per the direction of the Engineer-in-charge.

Providing all labour T&P for Priming 1 coat on wood or steel surface with approved primer after thoroughly cleaning the surface incluiding cost, conveyance,etc complete but excluding GST as per the direction of the Engineer-in-charge.

Providing all material Labour T&P for Painting two coats on new wood & Iron works with approved paint to give an even shade after priming thoroughly cleaning the surface including cost, conveyance etc complete but excluding GST as per the direction of the Engineer-in-charge.

Providing all labour T&P for washing and cleaning surface of plastic paint/cement paint/distemper thoroughly cleaning the surface including cost, conveyance etc complete but excluding GST as per the direction of the Engineer-in-charge

Providing and applying one coat to walls with weather coat paint of approved shade on old/new work to give an even shade with all heights including cost of scaffolding with al leads, lifts and delifts to proper finishing including cost, conveyance, of all materials etc. complete but excluding GST as per the specification and direction of Engineer-in-charge

Providing and laying 12mm thick C.P.in C.M.(1:6) finished smooth over stone/brick masonry work including curing and using good quality screened sand from approved quarry including cost, conveyance, royality, with all lead, lift and delift etc. complete but excluding GST as per the direction of the Engineer -in- charge. (measurement will be taken on finished and approved surface )

Providing and finishing surface of walls with cement based wall putty (Water Based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding with cost of all materials tases labour T&P etc complete but excluding GST as per the direction of Engineer in Chage

Providing all labour T&P for Priming 1 coat on wall surface with approved primer after thoroughly cleaning the surface incluiding cost, conveyance,etc complete but excluding GST as per the direction of the Engineer-in-charge.

Providing and applying one coat to walls with plastic emulsion paint of approved shade on old/new work to give an even shade with all heights including cost of scaffolding with al leads, lifts and delifts to proper finishing including cost, conveyance, of all materials etc. complete but excluding GST as per the specification and direction of Engineer-in-charge

Providing and laying Brick work in C.M (1:6) in super structure with fly ash bricks of size 25cm x 12cm x 8cm having minimum crushing strength not less than 75 kg/cm2 with dimensional tolerance +/- 8% and laying the bricks on full bed of mortar in headers and stretcher by racking out joints to a depth of 10 mm on the face side including cost, conveyance, royalty, labour, curing and all incidental charges, scaffolding including all leads, lifts, deilfts, etc but excluding GST. complete as per the direction of the Engineer-in-charge.

Providing fitting & fixing of wall panelling made up with 12mm ply board frame 2'-0x2'-0 horizontal and vertical member with 12 mm thick BWR block and 4 mm thick veneer pasted with all materials including cost,conveyance,taxes labour charges etc Complete but excluding GST or as per the direction of the Engineer-in-charge.

Supplying all labour fitting and fixing of 50mm dia GI pipe in roof including cost, conveyance, royalty etc complete but excluding GST as per the direction of the Engineer-in-charge.

Please Enable Macros to View BoQ information