Rejuvenation of Drains.

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)

Supply of earth by mechanical transport including loading, unloading and banking the same in layers with ½ tonner roller. Or wooden or steel rammers and top most layer with power roller of minimum 8 tonne & dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depression with mechanical lead upto 15 km including royalty and lift up to 1.5m in all kinds of soil.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in : cement mortar 1:6 (1 cement :6 coarse sand)

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc. up to lind level, excluding the cost of centering, shuttering and finishing : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plint level up to floor IInd level in all shapes and sizes in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Reinforced cement concrete work in wall (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level upto floor II nd level, excluding cost of centering, shuttering, fininshing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Steel reinforcement for R.C.C. work including strainghtening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically treated bars of grade Fe-500D or more.

12 mm cement plaster of mix : 1:4 ( 1 cement: 4 fine sand)

Providing and laying in position ready mixed plain cement concrete, with cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continous agitated mixer, manufactured as per mix design of specified grade for plain cement conrete work, including pumping of R.M.C. from transit mixer to site of laying and curing, excluding the cost of centering, shuttering and finishing, including cost fo curing, admixtures in recommended proportions as per IS : 9103 to accelerate / retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge. "Note : Excess/less cement used than specified in this item is payable/ recoverable separately. All works upto plinth level :M-10 grade plain cement concrete (cement content considered @220 kg/cum)

Providing and laying RMC of M-30 grade by using minimum 400kg of cement(43 grade, OPC) per cum of concrete in roads / streets manufactured in automatic RMC plant using coarse sand and graded stone aggregate of 20mm nominal size in appropriate proprtion as per approved design criteria including transportation to site in transit mixer, including cost of admixture in recommended proportion as per IS9103 to accelerate/ retard setting of concrete to improve workability without impairing strength and durability as per specification including spreading and compaction mechanically by using needle and surface vibratos, leveling to required slope & camber, finishing by floating & brooming with wire brushes etc. and curing including making provision for contraction/ expansion, construction of cross / longtudinal joints of size 10mm wide 50mm deep by groove cutting machine, providing and filling joints with approved joint filler and sealants, etc. complete, as per direction of Engineer in-charge. (Cost of joint filler & sealants shall be paid for separately under relevant items). Note :- Minimum cement content considered in M-30 is 400kg/cum. If any deviation in quantity of cement on lessar side is observed, a recovery of Rs. 10/kg shall be made from running / final bill. RMC M-30 with cement content less than 360kg/Cum shall be rejected. No extra payment shall be made for cement content more than 400kg/Cum in RMC M-30

Supplying and fixing chair bench manufactured by the agency "KONKRETE PRODUCTS CO." by using reinforced RMC of M-30 grade using vibro compaction process with back rest in decorative finish consisting of 2 number L-shapebase support in grey cement color (100 mm thick, 1000 mm back height, 450 mm front height, 620 mm base width) and 5 number reinforced cement concrete planks in terrazzo finish of size 1500mm x 100mm x50mm and 1 number of reinforced cement concrete plank in terrazzo finish of size 1500 mm x200 mm x 50 mm having overall dimensions 1500 mm seating length, 450 mm seating height and 1000 mm total height. All parts are joined together galavanized nuts & bolts of suitable size and all bolts are sealed after assembly. All as per approved make, design and pattern including loading, carriage, unloading, stacking, placing at position and fixing at site with all leads.