REPAIR/REPLACEMENT OF STREET LIGHT/ SECURITY LIGHT AND MID MAST LIGHT POST TOP LANTERN, REPAIR TO CABLE, AUTOMATIC CONTROLLING DEVICES AND OTHER CONNECTED WORKS UNDER AREA OF GE (WEST) JABALPUR

Amount

Excavation in trenches for laying under ground cable, errection of poles and stays in any type of soil not exceeding 1.5 meter wide and not exceeding 1.5 meter deep and getting out complete all as specified and directed by Engr–in–charge.

Supply and laying Sand cushioning to under ground cable in trenches/existing cable trenches/ducts in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable complete all as specified and directed by Engr in charge. Note: Punned thickness of sand shall be measured for payment.

Supply and laying Brick covering with width equal to length of brick as mechanical protection to cable with well burnt sub class ‘B’ bricks laid dry flat complete all as specified and directed by Engr in charge.

Removing surplus excavated material to a distance not exceeding 50 meter above the starting point complete all as specified and directed by Engr in charge.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed by Engr in charge.

Repair and maintenance of street light / perimeter light / security light / Garden lights/ flood light fitting HPSV/LED any type/make installed on LT / HT poles, building by means of replacing any unserviceable parts as and when required complete with labour including taking down, dismantling, reassembling and re-fixing the fitting at its original location with proper alignment and making good all defects including replacing of nuts/bolts/PVC connections etc and keep the light fitting in working condition through out the period of contract at one time payment complete all as specified and directed. Note :- Defective / worn out parts/ fittings measured and paid seperately as supply only relevant items.

Repair and maintenance of High mast light fitting any type/make installed on 12/15 mtr pole by means of replacing any unserviceable parts as and when required complete with labour including taking down, dismantling, reassembling and re-fixing the fitting at its original location with proper alignment and making good all defects by replacing nuts/bolts/PVC connection etc and keep the light fitting in working condition through out the period of contract and one time payment shall be made for the same complete all as specified and directed. Note :- Defective / worn out parts/ fittings measured and paid seperately as supply only relevant items.

Repair and maintenance of high mast/mid mast light fitting any type/make installed on HT poles,by means of replacing any unserviceable parts as and when required complete with labour including taking down, dismantling, reassembling and re-fixing the fitting at its original location with proper alignment and making good all defects by replacing nuts/bolts/PVC connection etc and keep the light fitting in working condition through out the period of contract and one time payment shall be made for the same complete all as specified and directed. Note :- Defective / worn out parts/ fittings measured and paid seperately as supply only relevant items.

Supply only HPSV Lamp of capacity 70 W Make : Philips/Wipro/crompton/Bajaj

Supply only HPSV Lamp of capacity 150 W Make : Philips/Wipro/crompton/Bajaj

Supply only HPSV Lamp of capacity 250 W Make : Philips/Wipro/crompton/Bajaj

Supply only HPSV Lamp of capacity 400 W Make : Philips/Wipro/crompton/Bajaj

Supply only HPSV Ballast of capacity 70 W Make : Philips/Wipro/crompton/Bajaj

Supply only HPSV Ballast of capacity 150W Make : Philips/Wipro/crompton/Bajaj

Supply only HPSV Ballast of capacity 250 W Make : Philips/Wipro/crompton/Bajaj

Supply only HPSV Ballast of capacity 400 W Make : Philips/Wipro/crompton/Bajaj

Supply only HPSV igniter of capacity 70/150/250/400Watt Make : Philips/Wipro/crompton/Bajaj

Supply only Electronic Chock for security light of size 36/40 Watt . Make : Philips/Wipro/crompton/Bajaj

Supply and fixing Tube rod for security light of size 36/40W complete. Make : Philips/Wipro/crompton/Bajaj

S&F in replacement of GI pipe bracket ,made out of GI pipe 40mm dia light grade 1.5mtr long bend to the shape 120 degrees angle all as per site requirement including MS clamps made of F1 50x6mm complete with nuts, bolts & washer as per requirement for mounting fittings.

Supply fixing in repair and connecting PVC insulated, round,sheathed, multicore, industrial flexible cable with bright annealed copper conductor, 1100 volts grade cable of size1.5sqmm, 3 core, confirming to IS 694-1990 complete all as specified and directed

Supply fixing in repair and connecting LED top post lantren, decorative luminaire with diffuser, 240 volts, 50 Hz, not less than 30 watts with mounting arrangement etc complete all as specified and directed by the Engr-in-charge, Make : C&S Cat Part No LTGLC30WHPLED/W or equivalent in BAJAJ, Havells, Philips

Supply and fixing in repair and connecting LED street light fitting 60-75 Watt having LED as light source, optical system, heat sink and drivers into one compact housing which ensure the LEDs have a long life, colour temperature - cool white (5700K) , nominal voltage 240 voltage, system efficay >75lm/W, pressure die cast aluminium housing, gear-integrated electronic driver, CRI - 70, protection IP-65/66, class - I complete all as specified and directed by the Engr - in - charge. Make - C&S Cat Part No INDUS/70W/LS LTESS30x2.5HPLED/LS or Wipro Cat part No LR02-671-XXX-57-XX or Bajaj Cat Part No 169900 BRTFG 75W LED I

Supply and fixing in repair and connecting LED street light fitting not less than 90 Watt having LED as light source, optical system, heat sink and drivers into one compact housing which ensure the LEDs have a long life, colour temperature - cool white (5700K) , nominal voltage 240 voltage, system efficay >75lm/W, pressure die cast aluminium housing, gear-integrated electronic driver, CRI - 70, protection IP-65/66, class - I complete all as specified and directed by the Engr - in - charge. Make - C&S Cat Part No INDUS/90W/LS LTESS90WLED/LS or Wipro Cat part No LR02-102-XXX-57-XX or equivalent in Havells, Philips

Supply and fixing in repair and connecting LED street light fitting not less than 60 Watt having LED as light source, optical system, heat sink and drivers into one compact housing which ensure the LEDs have a long life, colour temperature - cool white (5700K) , nominal voltage 240 voltage, system efficay >75lm/W, pressure die cast aluminium housing, gear-integrated electronic driver, CRI - 70, protection IP-65/66, class - I complete all as specified and directed by the Engr - in - charge. Make - C&S Cat Part No INDUS/60W/LS LTESS60WLED/LS or Wipro Cat part No LR02-671-XXX-57-XX or equivalent in Havells, Philips

Supply and fixing in repair and connecting LED street light fitting 25 Watt having LED as light source, optical system, heat sink and drivers into one compact housing which ensure the LEDs have a long life, colour temperature - cool white (5700K) , nominal voltage 240 voltage, system efficay >75lm/W, pressure die cast aluminium housing, gear-integrated electronic driver, CRI - 70, protection IP-65/66, class - I complete all as specified and directed by the Engr - in - charge. Make - C&S Cat Part No INDUS/25W/LS LTESS25WLED/LS or Wipro Cat part No LR02-291-XXX-57-XX or equivalent in Havells, Philips

Supply and fixing in repair and connecting LED flood lights, not less than 100 watt, having high power LED and unique flood optics to enusre uniform distribution system, colour temperature cool white (5700K), system efficay >80 lm/watt, pressure die cast aluminium housing, integrated electronic driver, IP-65, Class I complete all as specified and directed by the Engr-in-charge, Make C&S Cat Part No LTEF100WHPLED or equivalent in Bajaj Havells, Philips

Supply and fixing in repair and connecting LED flood lights, not less than 80 watt, having high power LED and unique flood optics to enusre uniform distribution system, colour temperature cool white (5700K), system efficay >80 lm/watt, pressure die cast aluminium housing, integrated electronic driver, IP-65, Class I complete all as specified and directed by the Engr-in-charge, Make- C&S Cat Part No LTEF80WHPLED or equivalent in Bajaj Havells, Philips

Supply & Fixing in repair post top luminaire globes suitable for FPS 31070 fitting including taking down of existing arrangement of any type complete all as specified and directed. Make - Wipro /Philips/Bajaj /CG

Supply and fixing in repair decorative gate light made up of high grade unbreakable polycarbonate material suitable for retrofit B 22 base LED of 20 watt incl intaking down of existing fitting of any type complete all as specified and directed, Make gate light LHFXBON1TN5Q020 of Havells or equivallent Make for LED lamp 20 watt- Philiphs, Havells, Bajaj, CG, Wipro

Supply and fixing in repair connecting and testing of Automatic Street light switch using infrared Sensor based Nature Switch for automatic switching of street lights, Nature switch operation should be based on Natural light lux level. Required illumination level for switching on is < 30 lux and for switching off > 10 lux. The sensor should also have part night operation facility for 4 - 12 hours. The sensor alongwith suitable power contactor, incoming-outgoing MCBs should be enclosed in a pole/wall moutaed enclosure made out of Rust proof, electric shock proof, termite proof and FR grade SMC junction box conforming to IP-54, The circuit should be suitable enough to take 8 kw single phase load with contactor 63 Amps conforming to IEC-60947-4-1/IS-13947-4-1 & incoming and outgoing MCBs of rating 63 Amps conforming to IEC-60898/IS-8828 and circuit wiring of minimum 16sqmm coper conductor wire in and including providing of 50x6mm flat iron clamp, necessary nuts and bolts complete incl taking down of existing arrangement all as specified and directed by the Engr-in-charge. Make of nature switch - Model No Swadeep-02EC8kw1P of Kakatiya Energy System or equivalent make of Bajaj/Healer, Make for Contactor- BCH/L&T/Schneider, Make of MCBs- Hager/Schneider/L&T/C&S, Enclouser - Sintax or equivalent

Dismantling/ taking down of existing street light switching system and Supply, fixing, connecting and testing of Automatic Street light switch using infrared Sensor based Nature Switch for automatic switching of street lights, Nature switch operation should be based on Natural light lux level. Required illumination level for switching on is < 30 lux and for switching off > 10 lux. The sensor should also have part night operation facility for 4 - 12 hours. The sensor alongwith suitable power contactor, incoming-outgoing MCBs should be enclosed in a pole/wall moutaed enclosure made out of Rust proof, electric shock proof, termite proof and FR grade SMC junction box conforming to IP-54, The circuit should be suitable enough to take 8 kw Three phase load with contactor 25 Amps conforming to IEC-60947-4-1/IS-13947-4-1 & incoming and outgoing MCBs of rating 32 Amps conforming to IEC-60898/IS-8828 and circuit wiring of minimum 10sqmm copper conductor wire in and including providing of 50x6mm flat iron clamp, necessary nuts and bolts, complete all as specified and directed by the Engr-in-charge. Make of nature switch - Model No Swadeep-02EC8kw3P of Kakatiya Energy System or equivalent make of Bajaj/Healer, Make for Contactor- BCH/L&T/Schneider, Make of MCBs- Hager/Schneider/L&T/C&S, Enclouser - Sintax or equivalent

Supply only metal halide lamp 400 watt 240 volts tubular type suitable for holder base E-40 complete all as specified & directed. Make : Philips/Wipro/crompton/Bajaj

Supply and fixing in repair non dimmable LED lamp 7 watt, B22 base, 6500K, 600 lumen complete Make Philips or equivalent model of Havells, Crompton Greaves

Supply and fixing in repair non dimmable LED lamp 45 watt, B22 base, Lumen flux -4500lm, CCT-6500K,PF>0.90 complete Make Philips or equivalent model of Havells, Crompton Greaves

Supply and fixing in repair Holder B-22 base, Plastic body, suitable for B-22 base 45 watt LED lamps Make Anchor, HPL, Plaza

Supply and laying or passing through pipe (in replacement) connecting and testing of XLPE insulated, armoured heavy duty, electric cable with aluminium conductor, 1100 volts grade of the following cross section area including suitable size lugs including taking down existing cable and removing to store etc etc all complete. Note:- Excavation & earth work, sand cushioning, bricks protection & GI pipe where required shall be measured & paid separately.

(a) 10 Sqmm 2 core

(b) 16 Sqmm 4 core

(b) 25 Sqmm 4 core

Supply and laying in repair 40MM bore, light grade ,galvanised pipe fixed with clamp of 25x3 flat iron welded to pipe fixed to wall/pole/ceiling or laid in floors or under road etc complete all as specified and as directed.

Drilling (Horizontally) existing road ( Maximum 10 mtr wide) suitable for passing GI tubing upto 80/100mm including making good existing distrubed surface complete all as specified and directed.

Trimming of tree branches Clearing of LT/HT line 4 mtr all around by cutting tree branches at ground level of any numbers and any girth on any numbers of conductors/earth wire complete all as specified and directed by Engr in charge.

Supply and fixing in repair MCCB 4 pole 100 Amps rupturing capacity 16 KA, with connecting links on LT panel/feeder pillar complete all as specified and directed.

Supply and fix in repairs junction box made out of polycarbonate with IP 55/IP 65 protection of size 200 x 160 x 98 mm, 5 way having terminals for termination of cable with necessary nuts and bolts ,Make - Hansal including -02 Nos polycarbonate cable gland Make :Hansal, 01 Nos DIN rail for mounting of MCB and 01 No, MCB SP, 10 KA, 6 Amps Make - Legrand in and including fixing clamp of FI 50 x 6mm with necessary nuts and bolts etc complete all as specified and directed.

S&F in replacement 3 Layer PPR Pipes, UV stabilised having thermal stability upto 93 degree centrigrade complete and fixed with the pole by providing FI clamps, nuts and bolts of size 25x25x3mm with nuts & bolts for protection of connecting wires, connection from junction box to light fittings, complete for outer dia 20 mm (PN-16) Make : SFMC / WET FLOW /AQUA

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular. Make - Plaza/Polycab/ Finolex

S&F the contactor three phase 32 A, Thermal Overload relay suitable for street light operation complete all as specified & directed.

S&F the contactor single phase 32 A, Thermal Overload relay suitable for street light operation complete all as specified & directed.

S&F the SPD for LED light singe phase (1P+N) 25 KA,complete all as specified & directed.

Supply Only driver suitable for 20-25 Watt existing LED Street light fitting of Make (Philips, Bajaj, C&S, Wipro) as required at site and directed by Engr in Charge driver make of driver : Philips/C&S/Osram/wipro.

Supply Only driver suitable for 70-90 Watt existing LED Street light fitting of Make (Philips, Bajaj, C&S, Wipro) as required at site and directed by Engr in Charge driver make of driver : Philips/C&S/Osram/wipro.

Supply Only LED module with LED complete suitable for 20-25 Watt existing LED Street light fitting of Make (Philips, Bajaj, C&S, Wipro) as required at site and directed by Engr in Charge, make of LED module with LED : Philips/C&S/Osram/wipro.

Supply Only LED module with LED complete suitable for 70-90 Watt existing LED Street light fitting of Make (Philips, Bajaj, C&S, Wipro) as required at site and directed by Engr in Charge, make of LED module with LED : Philips/C&S/Osram/wipro.

Material and labour for painting to steel tubular pole/Rail Pole of HT/ LT over head line and all MS clamps, cross arm work on poles with one coat of superior aluminium paint including necessary preparation of surfaces and painting of alternate strip with black and white synthetic enamelled paint strip 05 Nos each of 30 cm height up to 1.5mtr above PCC benching/coping complete all as specified and directed by Engr in charge

shri krishna traders

M/s Ajayshwar Singh Rana

SONAL CONSTRUCTION AND ENGINEERS