REPAIR/MAINT TO BOUNDARY WALL/COMPOUND WALL, CONCERTINA COIL, BARBED WIRE AND CONNECTED B/R ITEMS UNDER GE(AF) TECH AREA, AT AF STN AGRA

Amount

Demolition of brick work masonry built in CM incl all square, arches, pillars etc but excl ashlars facing dressed stone work and pre-cast concrete articles complete all as specified & directed.

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cm (1:6) complete all as specified & directed.

Demolition of RCC of any description and in any position (reinforcement cut as required to facilitate demolition) complete all as specified & directed.

M&L for M-25 design mix RCC work in columns, pillars, piers, posts and struts complete all as specified & directed.

M&L for M-25 design mix RCC work in walls, retaining walls, basement walls, ballast walls and the like;any thickness; above top of footings; including attached pilasters and buttresses complete all as specified & directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions for finished surfaces of concrete complete all as specified & directed.

Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified & directed.

M&L MS deformed bars 10mm dia & over cut to length bent to shape required including cranking bending spirally for hooping columns, hooking ends and binding with and including mild steel wire ( annealed ) not less than 0.9mm dia or securing with clips provided in RCC members complete all as specified and directed.

M&L MS deformed bars 6 mm to 8mm dia & over cut to length bent to shape required including cranking bending spirally for hooping columns, hooking ends and binding with and including mild steel wire ( annealed ) not less than 0.9mm dia or securing with clips provided in RCC members complete all as specified and directed.

Taking down cement / lime plaster of any description on brick work or stone walls etc including racking out joints hacking for key scrubbing down with water etc.complete all as specified and as directed

M&L for rendering 15 mm thick on brick or concrete surface of walls in cement mortar 1:4 finished even & smooth without extra cement including mixing only water proofing compound as per manufacturer instruction on external wall complete. Note:- WPC will be measured & Paid separately.

Supply only integral water proofing compound of approved make

M&L for preparation of newly plastered surfaces of wall and applying two coats of weather proof exterior emulsion paint over a coat of primer complete all as specified and directed.

M&L for preparation of old decorated surfaces and applying one coat of weather proof exterior emulsion paint over a coat of primer complete all as specified and directed.

Dismantling mild steel or wrought iron work of any description not otherwise provided for boundary wall complete all as specified & directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section,embedded in concrete including taking out embedded portion and making good disturbed ground complete all as specified & directed.

Dismantling chain link fencing wire mesh, of any type and size complete all as specified & directed.

Excavating in post holes (or similar holes) each n.exc 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm, watering, and removing surplus soil to a distance n.exc 50m and making good surface complete all as specified & directed .

M & L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation complete all as directed.

M&L for mild steel work as in posts or struts in fencing or boundary wall including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing wire mesh etc) including all necessary bolting or riveting and spot welding etc and similar work conforming to Fe-290 Gde E-165 complete all as directed.

Supply only chain link fencing mild steel galvanised fencing any size and type (size of mesh and dia of wire as directed by Engr-in-charge) complete all as directed.

Fixing only chain link fencing of any type fixed to RCC / steel post with mild steel flat & nut bolt etc,including necessary bolting complete all as directed.

S&F Mild steel round bars 10mm dia and over as in strengthning bars for chain link fencing conforming to Fe-290 Gde E-165 complete all as directed.

S&F in repair Galvanised, 2 strand, steel barbed wire 2.24 mm dia, barbed with 2 mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc as directed (each line of wire to be measured) complete all as specified & directed.

S&F in repair CONSEC ZAL super razor punched barb tape (SRPBT) aluminium base hot dip galvanised steel wire coated with CLR anti corrosive paint, making complete all as specified and as directed. Note: Razor punched strip is CONSEC-ZAL steel comprising of aluminium base with zinc alloy @ 150 gm/sqm conforming to ASTM A-792/12-792 M with additional primer treatment of Epoxy/Polyurethane.

S&F in repair concertina coil 1050 mm dia ( in stretched position), hot dip galvanised stee wire coated with CLR anti corrosive paint, making diamond shape with the help of dove tail clips( 18 SWG), fixed to the MS angle iron/precast RCC fencing post with and including binding wire complete all as specified & directed.

M&L for preparation of new surfaces of steel exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc red oxide primer complete all as specified and as directed.

M&L for preparation of new surfaces of steel n. exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc red oxide primer complete all as specified and as directed.

M&L for preparation of old surfaces of steel exc 10cm width or girth and applying one coat of synthetic enamel paint over a coat of zinc red oxide primer complete all as specified and as directed.

M&L for welding in repairs n. exc 2.5cm in length thickness of metal to be welded n.exc 9mm complete all as specified & directed by Engr-in-charge.

M&L for welding in repairs exc 2.5cm but n.exc 5cm in length thickness of metal to be welded n.exc 9mm complete all as specified & directed .

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified & directed.

S&F mild steel framed work such as grills gratings etc with ends of bars shouldered, riveted or forged into spikes,framed guard bars, barred iron doors/gates, ladders, framed blasters, walkways, railings, framework of water tanks and similar work conforming to Fe 290 Grade E-165 complete all as specified & directed.

S&F in repair bottom wheel made up of mild steel Fe 2062 of dia 300 mm dia, 45 mm thick including necessary cutting of surclip groove, bearing groove and boost groove including necessary hardening, nurling, fixing only roller bearings (qty 02 Nos) and other fittings etc all complete all as specifiede and as directed

M/S SINGH ELECTRIC CO

Asha Construction

garg construction company

Abhi Construction

deva engineers

C P Singh and Co

Sethi Brothers

GIRENDRA SINGH AND CO

SOHAMM ENGINEERS

M/s K S Builders