Construction of the memorial gate in memory of the late former Chief Minister Shri Kalyan Singh Lodhi (Babu Ji) in Dagarana village, Block Bar.

Earth work by mechinical /manual means in rough excavation banking excavated earth in layers not exceeding 20cm in depth breaking clods watering rolling each layer with 1/2 tonne roller or wooden or steel rammers and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads flodd banks marginal banks and guide banks or filling up ground depressions lead up tp 50m and for all lift.

Cement Concrete with 40 mm gauge stone ballast ,approved coarse sand and cement in proportion of 8:4:1 I/c all required for proper completion of work as directed by engineer in charge I/c all complete as S.I. NO.4.1.8

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:1.5:3 (1 cement : 1.5 coarse sand (zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) Upto Plinth Lvl as SI No-5.1.2

Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of approved make from factory/workshop to construction site including placing in position and binding all complete in Thermo-Mechanically Treated bars of grade Fe-500D or more. As per SI. No.- 5.22.6

Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers As per DSR No. 5.9.5

Supply and erection of built up overhead structure 10 to 15 m span comprising of two vertical post of 6 mtr. High made tip of 300 mm and NB. Medium class M.5. Pipe as vertical member welded with 10 mm M.S. Plate at top and bottom for bearing of horizontal frame comprising of 50 mm N.B. Made Medium class main pipe, 40 mm medium class pipe for vertical and horizontal members as of 40 mm class heavy N.B. Pipe bracing as per approved designed drawing with one coat of steel primer and two coats of synthetic enamel paint complete the work D.S.R. No. 10.16.1

Add crane charges for hoisting in position with driver and staff for vertical post (DSR 0028)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand andmanufacture DSR 13.62.1

Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of "L" shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by Engineer-in-charge. DSR 26.40

Supply & Fixing of Reteo Reflective Signboard made of 2.00mm Aluminium Sheet & Face to be fully covered with Diamond Grade cube retro reflective sheeting type xi as per IRC: 67 2010 inn approved colour, fully processed on by pressure sensitive equipment as specified by approved brand. back of aluminium frame of 35x35x5mm angle iron all round and cross with proper damping arrangement to be fixed in Structure. they back of the aluminium sheet shall be enamel coated.dSR 16.60.1