REP/REP OF OLD UNSV SECURITY LIGHTS GARDEN LIGHTS CABLES FOR SECURITY LIGHTS AND CONNECTED WKS AND REP MAINT OF BLDG LIGHTENING PROTECTION SYS SOLAR WATER HEATING SYS MECH LAUNDRY AND WKS AT NORTH AND SOUTH ZONE AT NAUSHERA UNDER GE 862 EWS

Amount

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth not exceeding 10sqm on plan for laying of cable and foundation of poles stays and getting out in soft / loose soil complete all as specified and directed.

All as per item No 01 above but depth exceeding 1.5m & n. exc 3.00m, complete all as specified and directed.

Returning, filling with excavated soil in including spreading, leveling, watering and well ramming in layers not exceeding 25 cm (soil) thickness all as specified and directed.

Removing of excavated material (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

M&L for dry sand cushioning to underground cable, provided with a layer 8 cm thick before and 15 cm deep after laying and stretching jointing and testing the cable complete all as specified and as directed. (Note: Punned thickness of sand shall be measured and paid).

Supplying and laying brick covering with width equal to length of brick as mechanical protection to cable using sub class 'B' bricks laid flat, size 230mm x 115mm x 75mm, complete all as specified and directed.

M&L in repair for 50mm bore galvanized steel tubing (light grade) with complete all fittings such as elbow, unions, nipples, tees, bends, short pieces, connections, check-nuts, caps, plugs, diminishing pieces and flanges etc as in pole, lightening protectioncrossing of roads, laid in trenches, fixed on walls for protection of cables, complete all as specified and directed.

Supply,laying, jointing and testing, XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 25 sqmm 4 core laid in trenches, ducts, pipes, on poles and connection with necessary cables lugs, glands nut bolts complete after taking down old unserviceable cable all as specified and directed. (Note :- Excavation of earth work, removing, returning filling in, sand cushioning, concrete cable cover and protection GI pipe shall be measured and paid separately and length of cable shall be one length unless otherwise as directed by GE).

Supply,laying, jointing and testing, XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 35 sqmm 3.5 core laid in trenches, ducts, pipes, on poles and connection with necessary cables lugs, glands nut bolts complete after & including taking down old unserviceable cable all as specified and directed. (Note :- Excavation of earth work, removing, returning filling in, sand cushioning, concrete cable cover and protection GI pipe shall be measured and paid separately and length of cable shall be one length unless otherwise as directed by GE).

Supply,laying, jointing and testing, XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 16 sqmm 4 core laid in trenches, ducts, pipes, on poles and connection with necessary cables lugs, glands nut bolts complete after taking down old unserviceable cable all as specified and directed. (Note :- Excavation of earth work, removing, returning filling in, sand cushioning, concrete cable cover and protection GI pipe shall be measured and paid separately and length of cable shall be one length unless otherwise as directed by GE).

Supply,laying, jointing and testing, XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 10 sqmm 2 core laid in trenches, ducts, pipes, on poles and connection with necessary cables lugs, glands nut bolts complete after taking down old unserviceable cable all as specified and directed. (Note :- Excavation of earth work, removing, returning filling in, sand cushioning, concrete cable cover and protection GI pipe shall be measured and paid separately and length of cable shall be one length unless otherwise as directed by GE).

Supply,laying, jointing and testing, XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 6 sqmm 2 core laid in trenches, ducts, pipes, on poles and connection with necessary cables lugs, glands nut bolts complete after taking down old unserviceable cable all as specified and directed. (Note :- Excavation of earth work, removing, returning filling in, sand cushioning, concrete cable cover and protection GI pipe shall be measured and paid separately and length of cable shall be one length unless otherwise as directed by GE).

Supply, Fixing and testing of street light control panel digital 24 Hrs timer of Max load 6 KW, in an inlcuding of contactor rating 32Amp TP, MCB 40Amp TPN, three phase of IP rating IP-54 with internal wiring of panel with FRLSH cable and with in-built short-circuit protection, including removing old unserviceable panel, complete all as specified and directed.

Supply, Fixing and testing of street light control panel digital 24 Hrs timer of Max load 6 KW, in an inlcuding of contactor rating 32Amp TP, MCB 40Amp SPN, single phase of IP rating IP-54 with internal wiring of panel with FRLSH cable and with in-built short-circuit protection, including removing old unserviceable panel, complete all as specified and directed.

S&F for decorative LED Bollard light with diffuers outdoor type LED Bollard light 9W cone shape, IP 65 lihgt including all accessories and connecting materials such as clamps, brackets, nut bolts reducer etc with base PCC 1:2:4 fixed on wall/floor and making electrical connection with copper cable including taking out old bollard light, complete as in repair all as specified and directed.

S&F in replacement for LED 12/15 watt bush and spike light luminaire with IP-65 protection complete with all accessories duly prewired and connecting with PVC insulated, sheathed flexible copper conductor cable 3 core 0.5 sqmm of adequate length from looping box to light fitting, complete as in repair all as specified and directed.

S&F in replacement for LED post top lantern light fitting 20 watts with cast aluminium spigot lid cover and clear acrylic cover with IP65 protection complete with all accessories including fixing arrangement on top surface of boundary wall or on pillar by providing GI pipe of suitable size and length as per site requirement and making good the distrubed portion to match with existing surface complete as in repair all as specified and directed.

S&F in replacement for LED street light fitting 35 watts dusk and down type, made in pressure diecast housing with eppoxy power coated dark graphite grey colour finish, parismatic polycarbonate cover with individual LED lense with IP 66 complete with all accessories and necessary fixing arrangement on wall at any height including three core 0.5 sqmm copper cable from connector to fitting, complete all as specified and directed.

S&F in replacement for LED street light fitting 60 watts, made in pressure diecast housing with eppoxy power coated dark graphite grey colour finish, parismatic polycarbonate cover with individual LED lense with IP 66 complete with all accessories and necessary fixing arrangement on wall at any height including three core 0.5 sqmm copper cable from connector to fitting, complete as all as specified and directed

S&F in replacement for LED street light fitting 72 watts, made in pressure diecast housing with eppoxy power coated dark graphite grey colour finish, parismatic polycarbonate cover with individual LED lense with IP 66 complete with all accessories and necessary fixing arrangement on wall at any height including three core 0.5 sqmm copper cable from connector to fitting, complete all as specified and directed.

S&F in replacement for 72 watt 230 volts, LED flood light luminaire AC outdoor type with thermal management in multiple optics and equipped with IP-66 protection with impact and corrosion resistant complete with driver and lamp, complete all as specified and directed.

S&F in replacement for 180 watt LED flood light luminaire with secondary optics made in pressure die cast housing and heat sink in aluminium of IP-66 protection complete with all accessories duly prewired and including fixing arrangement on high mast poles/wall surfaces etc at any height providing clamps, nuts, bolts, and washers etc, complete all as specified and directed.

M&L in replacement for GI bracket pipe of size 25mm dia light grade of 1.2 mtr long bent to shape hot or cold suitable for street street light fitting and making the one end of GI pipe bracket suitable for fixing of street light fittings of any type and the GI bracket shall be fixed on wall/pole surfaces by providing suitable MS flat iron 25x4 mm clamps 2 Nos of 25 cm long duly to the bracket pipe and painting to MS clamps and fixing with necessary suitable nuts, bolts and washers, complete all as specified and directed.

S&F for FRP looping box of size 200x140x95mm with aluminium bus bar (04 Nos) 100 Amps capacity connector and comprising oF MCB SP 6 Amps, ISI marked 240 V, 'C' series/curves complete with including providing GI calmps, nuts bolts etc suitable for fixing on PCC pole/wall etc and after taking down old unserviceable looping box of any type complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground earth pit not less than 2.25m deep below ground level with top edge of the plate not less than 1.5m deep below normal ground level connected to and including 25X4mm thick galvanised iron strip by means of bolts, nuts, checknuts and washers of galvanised iron or steel all as specified in electrical plate No 3 of SSR (2009) part-I including 40mm bore GI pipe light grade for protection of earth strip and PCC 1:3:6 type C-1 as in pit, 40mm thick, Precast RCC type B1, earth pit cover 8 cm thick reinforced with 8mm dia TMT bars @150mmc/c and two handles, excavation and earth work in any type of soil and alternate layers of charcoal, common salt and 20mm bore galvanised medium grade steel tubing for watering with one end fixed with cast iron funnel and wire mesh and testing on completion complete after dismantling of old unserviceable earthing with all material etc all as specified and directed. (Note:-Earth strip, earthwork and protection pipe upto board is included in the rate quoted)

M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of the earth plate at a depth not less than 1.5 mtr below ground level, earth plate surrounded by and packed with 15 cm thick layer of char coal dust and common salt, earth lead GI wire 4.00 mm dia by means of bolts, Nuts, Check Nuts and washers of galvanized iron and thimbles and other end of the earth wire connected to main switch board and protected by galvanized iron pipe light grade 15 mm bore and water pipe 20 mm bore GI light grade with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-1 & 40mm thick precast RCC, type B-1, cover all as specified & shown in elect plate No. 3 of SSR part I of 2010 including testing on completion after dismantling of old unserviceable earthing with material etc. complete all as specified and directed. (Note:-Earth wire, earthwork and protection pipe upto board is included in the rate quoted)

S&F in replacement for rigid Non metallic PVC conduit of 25mm dia (medium grade) including conduit accessories for encasing the cable from looping box to streel light fittings on PCC poles/on wall surfaces as per site requirement with necessary base saddles etc. all as specified and directed

S&F for copper conductor cable, PVC insulated, sheathed flexible, multistranded ISI marked 1100 volts grade 3 core 1.5 sqmm and including connection and testing and after taking down old unserviceable copper conductor cable complete all as specified and directed.

M&L for complete removal of existing paint from the steel tubular swaged pole of 9 mtr height without removing accessories and preparation of surfaces for repainting the poles and painting with including two coats of synthetic enamel paint upt 1.50mtr height having alternative white and yellow strips of 30cm height each and winding of reflective strip of 10 cm on each pole, including one coat of aluminium paint to the remaining part of pole (i.e above 1.50 mtr height) and its corss arms bracing, support and all steel members complete etc all as specified and directed.

S&F in replacement of aluminium rod 12mm dia and 300mm long on the highest point of the building on porcelain nase support and making termination roof / down conductor with necessary aluminium screws/ nuts, bolts etc, complete all as specified and directed.

S&F in replacement of test point terminal block made of gun metal or phosphorous bronze of size 75x75x25mm, drilled and screwed including 3 nos. 8mm dia 25mm long hexagonal head brass screw in FRP box duly locking arrangement inlcuding connecting down conductor and earth strip, complete all as specified and directed.

S&F in replacement for earth continuity conductor of aluminium strip of size 25x3mm, fixed to roof/wall on insulators or recess or chases or burried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation with necessary fixing arrangement by providing porcelain base at 60cm interval and using cadmium plated fixing screws and insulators, complete all as specified and directed.

S&F in replacement for 25 mm bore galvanized iron GI tubing light grade with all fittings and jointing & erecting the pipe for lightening protection at any height with flat angle support to base, complete all as specified and directed.

S&F in replacement for 40 mm bore galvanized iron GI tubing light grade with all fittings and jointing & erecting the pipe for lightening protection at any height with flat angle support to base, complete all as specified and directed.

M&L for earthing complete with copper earth plate electrode 60cm x 60cm x 3.15mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of the earth plate at a depth not less than 1.5 mtr below ground level, earth plate surrounded by and packed with 15 cm thick layer of char coal dust and common salt, earth lead copper strip 20x3mm by means of bolts, Nuts, Check Nuts and washers of galvanized iron and thimbles and other end of the earth wire connected to main switch board and protected by galvanized iron pipe light grade 15 mm bore and water pipe 40 mm bore GI light grade with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-1 & 40mm thick precast RCC (type B1) cover all as specified & shown in elect plate No. 3 of SSR part I of 2010 including testing on completion after dismantling of old unserviceable earthing with material etc. complete all as specified and directed. Note:-Earthwork, Earth strip and protection pipe upto board is included in the rate quoted.

M&L for plain cement concrete 1:4:8, type D-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete, complete all as specified and directed.

M & L for plain cement concrete type C-1, 1:3:6, (using 20 mm graded stone aggregate), in foundation of PCC poles/ struts as specified including necessary form work as required, complete all as specified and directed.

M & L for plain cement concrete type B-1, 1:2:4, (using 20 mm graded stone aggregate), as in coping around poles including necessary form work as required, complete all as specified and directed.

M & L for erection of steel tubular swaged poles including foundation & two coat of aluminium paint over a coat of red oxide zinc chrome primer in externally exposed to view portion and black bituminious painting to internal surface and portion embedded in concrete incl marking of pole No in black paint compelte with cast iron base plate, finial tapper, plug, bolts, nuts & screws as specified type 410 SP-55 (11.00 mtr long) conforming to IS 1678 complete including removing old unserviceable pole of any size & type, complete all as specified and directed.

S&F in repair of copper strip of size 20x3mm as earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles, complete all as specified and directed.

Solar Water Heater M&L for overhauling & servicing the solar water heater of any capacity by repair/replacing the spare parts of any type i.e anode, gasket set, solar cell, solar panel glass etc, and blocks in the solar cells removed by the acid cleaner and damaged solar cells to be replaced including replacement of unserviceable/damages part complete all as specified and directed. Note:- (i) Defective parts replaced will be measured and paid separately as supply only but all petty items such as Nuts, bolts, washer etc used for repair will be include in the quoted rate.

Supply only Gasket set for solar water heater panel suitable for 100Ltr capacity as per sample, complete all as specified and directed.

Supply only solar collector glass or glass panels suitable for any capacity of solar water heater with gasket of existing make and size, complete all as specified and directed.

Supply only solar tank puf insulation flat plate suitable for 1000ltr capcaity of approved make, complete all as specified and directed.

Supply only heating element (3/4 KW) for 100ltr to 200 ltrs capacity solar water heater of approved make, complete all as specified and directed.

S&F in replacement of Gun metal, globe or gate valves, cast copper ally, high pressure with iron wheel head handle, screwed both ends for GI pipe or for unions and fixed in size of 20mm dia , complete all as specified and directed.

S&F in replacement for 20 mm bore 3 layer, PP-R (polyproylene random copolymer) cocealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R Plain & brass threaded polyproylene random fittings fixed complete to walls, ceilings or floors etc, complete all as specified and directed.

S&F in replacement for PCB PLLSTK2002 suitable for commercial mechanical laundry front loaded of capacity 15 Kg of existing make and model No NORVWE 15, complete all as specified and directed. Make: IFB or as per existing make.

S&F in replacement for IO card suitable for commercial mechanical laundry front loaded of capacity 15 Kg of Model No NORVWE 15, complete all as specified and directed. Make: IFB or as per existing make.

S&F in replacement for data cable for IO Card suitable for commercial mechanical laundry front loaded of capacity 15 Kg of Model No NORVWE 15, complete all as specified and directed. Make: IFB or as per existing make.

S&F in replacement for solenoid valve for drain suitable for commercial mechanical laundry front loaded of capacity 15 Kg of existing make and model No NORVWE 15, complete all as specified and directed. Make: IFB or as per existing make.

S&F in replacement for vibration limit switch suitable for commercial mechanical laundry front loaded of capacity 15 Kg of existing make and model No NORVWE 15, complete all as specified and directed. Make: IFB or as per existing make.

S&F in replacement for emergency stopper suitable for commercial mechanical laundry front loaded of capacity 15 Kg of existing make and model No NORVWE 15, complete all as specified and directed. Make: IFB or as per existing make.

S&F in replacement for contactor 18 A suitable for commercial mechanical laundry front loaded of capacity 15 Kg of existing make and model No NORVWE 15, complete all as specified and directed. Make: IFB or as per existing make.

S&F in replacement for time switch 0 to 60 min suitable for commercial mechanical laundry front loaded of capacity 15 Kg of existing make and model No NORVWE 15, complete all as specified and directed. Make: IFB or as per existing make.

S&F in replacement for relay for contactor 18 A suitable for commercial mechanical laundry front loaded of capacity 15 Kg of existing make and model No NORVWE 15, complete all as specified and directed. Make: IFB or as per existing make.

S&F in replacement for complete wiring of control panel suitable for commercial mechanical laundry front loaded of capacity 15 Kg of existing make and model No NORVWE 15, complete all as specified and directed. Make: IFB or as per existing make.

S&F in replacement for V- belt for motor suitable for commercial mechanical laundry front loaded of capacity 15 Kg of existing make and model No NORVWE 15, complete all as specified and directed. Make: IFB or as per existing make.

Repair / realignment including welding for drum stainless steel suitable for commercial mechanical laundry front loaded of capacity 15 Kg of existing make and model, complete all as specified and directed. Make: IFB or as per existing make.

narayan construction (BID ID -3400518)

M/S AKHILESHWAR ASSOCIATES (BID ID -3392615)

m/s vishkarma construction (BID ID -3391727)