PROVN OF TOILET BLOCKS FOR DEFENCE SECURITY CORPS GROUND SECURITY POST AND SPL REPAIR/REPLACEMENT OF OVERHEAD CONDUCTOR WITH UG LT CABLES AND CONNECTED ITEMS AT PATIALA MIL STN

Amount

Surface dressing in soft/loose soil n exc 15 cm deep trimming of natural ground (removing vegetation/shurbs/ brushwood. Undergrowth and carring away rubbish to a distance of 50 metre complete all as specified and directed.

Excavation in trenches n,exc 1.5 mtr wide and n exc 1.5 m in depth and getting out in any type of soil and n.exc 10 sqm on plan complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggt as in foundation, filling, mass concrete complet all as specified and directed.

M&L mild steel TMT bar 10 mm dia and over as in reinforcement cut to length bend to shape required and binding with and incl mild steel wire (annealed ) not less than 0.9 mm dia complete all as specified and directed.

M&L mild steel TMT bar 6mm to 8mm dia or above as in reinforcement cut to length bend to shape required and binding with and incl mild steel wire (annealed ) not less than 0.9 mm dia complete all as specified and directed.

M&L for Mild steel TMT bar 8 mm dia as in stirrups incl bending and binding with and incl mild steel wire not less than 0.9 mm dia complete all as specified and directed.

M&L for use and waste for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; verticla or to batter,surface finished fair complete all as specified and directed.

M&L for use and waste Formwork, rough finished to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L Formwork, rough finished to sides and soffits of floor or roof beams, beam haunch girders, bressummers,lintels, cantilevers, shelves including supports,overhangs etc. also splays between floors and beams, etc. complete all as specified and directed.

M&L, Form work to sides of pillars posts, struts, piers, columns & stanchions square rectangular or polygonal rough finished surfaces in shape complete all as specified and directed.

M&L for use and waste for Form work, fair finished to edges of concrete flats, treads, breaks in floors,window cills, concrete railings,openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm complete all as specified and directed.

M & L for providing reinforced cement concrete nominal mix type B1 1:2:4 using 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc complete all as specified and as directed

M & L for providing reinforced cement concrete nominal mix type B1 1:2:4, using 20 mm graded stone aggregate as in columns, pillars, piers, posts and struts etc complete all as specified and as directed

M & L for providing reinforced cement concrete nominal mix type B1 1:2:4, using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, shelves and the like complete all as specified and directed.

M & L for providing reinforced cement concrete nominal mix type B1 1:2:4, using 20 mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and as directed

Returning ,filling in ,including ,spreading , levelling , watering and well ramming in layers n, exc, 25 cm thick complete all as specified and as directed

Removing excavated material n. exc 50 m and depositing where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed

M&L brick work with old size bricks straigth or curved on plan exc 6m mean radius built in CM (1:6) cmplete all as specified.

M&L half brick thick brick work with sub class "B" bricks straigth or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified.

Filling under floor with excavated soil as required from item No 02 above and spreading and levelling in layers including watering and well ramming.

M&L hardcore of guage n.exc 63mm deposited spread and levelled in layers n.exc 15cm thick using broken stone complete all as specified and directed.

M & L for 75 mm thick PCC type D-2, 1:4:8 (40mm graded stone aggregate) as in sub base of flooring complete all as specified.

M&L for PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) 75mm thick as in plinth protection all as specified

M & L for 15 mm thick cement plaster in cement mortar 1:4 mixed with water proofing compound @ 3% of weight of cement on concrete or brick surface and finished even and smooth w/o using extra cement complete all as specified and directed. Note: (Water proofing compound measured and paid seperately)

M&L for 20 mm thick rendering on top of roof in CM 1:4 incl mixed with WPC @3% of weight of cement. Note:(WPC shall be paid separately)

M&L for APP based polymer modified membrane with polyster non woven reinforced of weight not less than 3 kg/sqm 3mm thick with polythene finished sealing with side over laps of 75mm & 100mm laps at the ends of membrane by torch application method & applying two coats of aluminium paint as per the makes approved by the Engr-in-Charge

Supply only Integral waterproofing compound

M & L for 15 mm thick cement plaster in cement mortar 1:6 on concrete or brick surface and finished even and smooth w/o using extra cement complete all as specified and as directed

M&L rendering 5 mm thick in CM (1:3) on concrete surfaces of ceilling ,finished the surfaces even and fair without using extra cement complete all as specified.

M&L for Non Skid ceramic coloured joint free tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.06 Sqm but n. exc 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for Glazed ceramic coloured joint free tiles of size 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match 10 mm thick rendering CM 1:4 complete all as specified and directed.

M&L 18-20mm thick Granite (of any type) work (tablee rubbed and polished) in steps, jambs, pillars, windowcills,cooking platforms and like in cement mortar (1:4) including pointing in white cment (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and directed.

M&L for factory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face complete all as specified.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, fixing in opening complete all as specified.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section

S&F stainless steel butt hinges medium weight 100 mm long complete all as specified and directed

M&L for 150mm long extruded aluminium handle fabricated type complete all as specified and directed.

S&F aluminium alloy anodised sliding door bolt with hasp and stapple ( bolt type) and fixing clips of sheet cast or extruded section with fixing bolts and sliding bolt of extruded section 300mm length & dia not less than 12mm with & including 6 Nos of bolts complete all as specified and directed.

S&F powder coated Anodised (Minimum thickness of powder coating 50 micron ) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified, including rubber gasket and aluminium beading complete all as specified.

Material & Labour for preparation of new surfaces of wall and applying two coats of cement base paint complete in all respect as specified

M&l for preparation of newly plastered surfaces of wall and applying three coats of White wash all as specified

M&L for preparation of newly plastered surfaces of Ceiling and applying three coats of White wash all as specified

S&F 110mm bore PVC pipe single socket in any length laid in trenches and floor complete all as specified and directed..

S&F 75 mm bore PVC pipe single socket in any length laid in trenches and floor complete all as specified and directed..

S&F PVC (SWR) vent cowl 75 mm bore

S&F PVC bends any radius 110 mm bore

S&F PVC bends any radius 75 mm bore

S&F PVC floor trap with grating including jointing waste pipe in runlead 75mm dia fixed in jointing with solvent cement complete as per direction by Engrin-Charge.

S&F vitreous china premium/1st quality wash down water closet pan floor mounting (pedestal pattern/EWC) S/P trap white/ivory including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe CP 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including supply and fix of PVC long arm S/P trap so that joint is avoided inside the building as well as in wall and outlet straight away come out of wall in all floors complete in all respect all as specified.

S&F health faucet (ABS Body) with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all as respect as specified.

S&F vitreous china premium/1st quality wash basin (counter top), white/ivory/off white, size 580x430 mm including S&F all accessories as recommended by manufacturer incl. CP bottle trap 32 mm with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union and incl 32mm brass CP waste coupling and complete fixed in position in all respect as per manufacturer's instructions and taking down existing of any description/size all as specified and directed

S&F mirror decorative type of 5 to 6 mm thick with bevelled edge and fixed with stainless steel studs/ brackets/ plugs/ connector/ spacers/ screws etc chrome finish complete fixed in position all as specified and directed

S&F C.P towel Rail 60 cm long ‘D’ type 20 mm dia complete all as spfd.

Supply and fixing for steel water tubing medium grade galvanised incl short length fixed to wall ceiling or laid in floors with all fittings (Such as bends elbow, tee, short pieces, connections back buts dimnishing pieces, caps and plugs union etc) of 15mm bore complete all as specified

M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth on brick walls complete all as specified and directed

Supply and fixing for steel water tubing medium grade galvanised incl short length fixed to wall ceiling or laid in floors with all fittings (Such as bends elbow, tee, short pieces, connections back buts dimnishing pieces, caps and plugs union etc) of 20mm bore complete all as specified

Supply and fixing cast copper alloy stop valves/gate valves/angle cock 15mm bore srewed dowh high pressure,brass polished finished with crutch or butterfly handles screwed both ends for iron pipes or for unions and fixed complete all as specified and directed

S&F for WHB Mixer valve for mixing hot and cold water of Brass Chromium Plated screwed down for 15mm bore iron pipe complete all as specified and directd by Engineer-in-Charge.

S & F CP bib taps cost copper ally with crutch or butterfly handles screwed for iron pipe or for brass derrule and fixed to 15mm bore pipe complete all as specified and directed

Supply and fixing low density PVC connection commercial quality 450mm long incl PTMT nuts at both sides of 15mm bore and fixed complete all as specified and directed.

S&F PVC flusing cistern low level 10 Ltr capacity of approved make including fixing of brackets connection to WC with mild steelbrackets and making good disturbed area complete all as directed.

S&F 500 ltr Rotational moulded polyethlene water storage tanks double layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I 500 litres capacity complete all as specified and directed.

S&F vitreous china urinal bowl flat back of size 465x 355 x 265 mm white including providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing with plugs with and 60mm long brass screws, pointing arround urinal back in cement and with grating and union for discharge pipe complete all as specified and directed.

M&L Salt-glazed stoneware gully trap 125x100 mm, setting and jointing with solvent cement complete all as specified and directed.

S&F 40mm dia PVC waste pipe flexible 750mm long including nut washer cup bracket complete all as directed by Engr-in-Charge

M&L 32mm dia low density poly ethylene pipes (LDPE) of pressure rating 6Kgf/cm2 fixed to wall , ceiling or in floors etc complete all as directed by Engr-in-Charge

Surface excavation n exe 30cm deep and average 15cm deep and getting out hard/dense soil complete all as specified and directed

M&L sand filling under floor /over floor or in sand cushion under interlocking tiles including well ramming complete all as specified and directed by Engr-in-charge.

M & L 60 mm thick machine pressed precast conctete interlocking paver block any shape with grey cement and pigment and size confirming to IS 15658-2006 M-35 Grade complete all as directed by Engr-in-Charge.

M&L for precast cement concrete Type B1 1:2:4 (20 mm graded aggregate) in appex stone/kerb stone with plain fair faces including chamfers, weathering throting etc and set in cement mortar 1:4 complete with joints to math size and shape as approved by engr-in-charge

M&L for PCC (1:2:4) type B-0 using 20mm graded crushed stone agg as in coping /benching in man hole etc,finished even and smooth using extra cement incl necessary form work

M&L for PCC(1:3:6) type C-2(Using 40mm graded stone aggregate) to bed of drain pipe incl. packing under and haunching against the pipe after they are laid and tested for 150 mm bore complete all as specified & directed.

M&L for laying and jointing RCC Class NP-2 drain pipewith collars of internal dia 150 mm complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds mitred/stopped ends etc complete.

M&L pre-cast reinforced cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) set in cement 1:6 as in landing cover slabs (for manholes etc) complete all as specified & directed (reinforcement shall be measured & paid separately).

Construction of Soakage wells of size 1.80 m dia and X 3.0 m deep with excavation in any type of soil , foundation in PCC 1:4:8 ,walls in honey combed brick masonary in CM(1:4) with top ring of M-25 RCC including intercepting chamber and screen chamber made of brick masonary in CM (1:4), RCC cover slab in RCC M25 , SFRC cover interconnecting pipes of RCC /DWC , filled with brick bats complete all as directed and as shown in drawings.

M & L for Concealed Point wiring with 1.5 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multi stranded copper conductor single core cable for one light/fan/bell point drawn through and including non-metallic rigid PVC conduit of adequate size with all accessories ie PVC gutties etc terminated in sunken/pressed metal flush box and white modular cover plate with frame for mounting of switches /sockets/ fan regulators etc including FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 1.5 Sqmm green in colour as earth continuity conductor connected to common earth and earth dolly controlled by one switch and/or one regulator complete all as specified and directed by Engr-in-charge. Note-I-(Switches and regulators shall be measured and paid for separately). Note-II- ( Wiring shall be done as per colour code in IS for phase, neutral and earth). Note-III- (The cost of modular cover plate and metal flush boxes is deemed to be included in the unit rate quoted for this item). Note -IV - cost of Eye/bottle thimbles used for connection in switches/sockets is deemed to be included in the unit rate quoted for this item.

All as per Sl item No 77.00 above herein before but one socket out let 5 pins 5 Amp on the same board with other switches complete all as specified and directed.

All as per Sl item No 77.00 above herein before but for one socket out let 5 pins 5 Amp on independent board complete all as specified and directed.

S & F Modular switch 1 way, 6 Amps, 1 module, 230 volts complete all as specified.

S & F Modular socket 5 pin 6 Amps, 2 module 230 volts complete all as specified.

S & F ceiling rose surface bakelite surface 65 x 50mm 3 terminals all as specified & directed

Supply and fix Electric Water heater (Geyser) storage type of capacity 25 ltr BEE 5 star rated, ABS body, metal tank with glass lined coating multiple heating option, shock safe plug puf insulation, incoly glass coated anode rod/copper heating element with ISI mark, adjustable knob for temp setting with minimum & high working pressure, multi functinoal saftey value, & whirl/swril flow technology, themostat electronic type, complete including superior quality copper connection pipe heavy duty 15 mm dia 450 mm long, brass adopter for water connection with nickel coated ISI marked with fastener, nut bolt, washers duly grouted, giving shape to hole as suitable and plastering including making good of disturbed surface as per exisiting surface connection to inlet and outlet valves, testing complete all as specified and dirceted by Engineer-in-Charge.

S & laying GI tubing 'medium grade' 15 mm bore with all necessary fittings like elbow, reducer, T-joint, nipple and passing through brick walls, ceilling or laying in floors, tapping from existing lines and necessary cutting, chasing of walls etc complete all as specefied and directed.

Supply and fix Stop valve cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe of bore 15 mm Chromium plated fancy type complete all as specified and directed.

Supply and fix Bib tap cast copper alloy chromium plated, fancy type, with capstain head handle screwed down screwed for iron pipe and fixed fo 15mm bore pipe complete all as specified and directed by Engr-in-charge.

M & L for Sub main wiring with two single core 2.5 Sqmm PVC insulated and unsheathed FRLSH ,stranded copper conductor cable drawn through PVC concealed conduit 25 mm dia including 2.5 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earth wire all as specified and directed by Engineer-in-charge. Note 1:- 2(two) Runs of 2.5 Sqmm Copper conductor cable, 1 Run of PVC conduit & 1 Run of 2.50 Sqm Copper conductor Earth wire shall be measured as one unit) Note 2 Rate quoted for this items shall be inclusive of the cost of (i) Rigid non-metallic PVC conduit of 25 mm dia with tees, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. (ii) Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to match the existing surfaces and cutting not exc. 10 cm girth .

Supply and fix SPN earth metal plug 240 volts with 20 amp SP MCB with a two pin and earth plug and socket for geysers complete all as specified and directed.

Supply and fix Tube light fitting Self Ballasted LED Batten. Extruded Thermoplastic body with PC Diffuser in square LED Batten 18/20W 6500K of capacity ,20 watt,4 ft long incl 3 core flexible wire 0.5 sqmm copper cable for connection all as specified and directed by Engr-in-charge.

Supply & fix mirror light with Linear & compact 12 W mirror light with decorative grey end caps, polycarbonate body and ribbed opal diffuser of capacity 12 watt complete all as specified and directed.

Supply and fix Exhaust fan AC single phase 230/240 V of size 450 mm sweep heavy duty 1400 rpm metal body, high efficiency motor, dynamically balanced blade for better performance and corrosion-resistant powder coated metallic finish including Louver, cutting hole for fixing of exhaust fan complete all as specified and directed by Engineer-in-Charge.

Supply and fix New generation energy saving and environmental friendly long life LED building security light 1x25 watts made up of pressure die cast alluminium housing with high power LED as light source and lense embedded PC cover having TOP OPENING separate driver compartment with IP65 protection and impact resistance of IK07, with all accessories including suitable MS bracket with 32mm bore light grade GI pipe bemd to shape, including MS clamp of size of required size and PVC cable 1.5 Sqmm twin core from ceiling rose to light fittings complete all as specified and directed by Engineer-in-charge.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for laying of cables including getting out in any kind of soil complete all as specified and directed.

Material and labour for sand cushioning for cables 8 cm below the cable and 15 cm above with dry river sand in trenches for cushioning of underground cable line including spreading, leveling, well ramming completed all as specified and directed. Note:-(i) Consolidated/punned sand shall be considered for purpose of payment.(ii) Sand shall be same as specified for plastering work.

Cutting of hardstanding floor/wall for laying of cable including matching with suface by using cement concrete 1:2:4 TYPE B-1 (20 mm graded agg)all as specified and directed.

M&L for boring of holes under road pavement hard standing by trench less technology using ultra sound technique and necessary machine suitable to pass through 40 to 80 mm bore GI tubing and cable etc complete all as specified and directed. Note: GI pipe shall be measured and paid separately under relevant item

Supplying & laying factory made unreinforced Precast concrete cable covers class LV type 1, flat, Size 250x150x40mm laid in trenches as protection to cables complete all as directed by Engr-in-Charge

Material and labour for replacement of GI tubing light grade 40 mm bore for passing through cables under the floor ,along the wall or along the pole complete all as specified and directed.

Supplied and laid XLPE Insulated ,screened, PVC bedded, galvanized steel wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core complete all as specified& directed by Engineer-in-Charge.

Supply and fix Sheet metal enclosure 8 ways double door for DBs when MCBs are to be used 240,volts including 200 Amps standard bus bar of suitable size and common neutral link all flush mounting type, drilling holes for incoming and out going cables with IP54 protection complete all as specified & directed by Engr-in-charge.

Supply and fix MCB , SPN, 240 Volts ,32-40 amp for fixing in DBs of including proper thimble connections complete all as specified and directed by Engineer-in-Charge.

Supply and fix MCB, single pole 240 volts 6 to 32 Amp capacity for fixing in DB’s including proper thimble connections complete all as specified and directed by Engineer-in-Charge.

M&L for taking out branch connection from existing CI/DI pipe line upto 250 mm bore by using freulle including insertion of TEE of 50x50x25 mm complete all as specified and directed by Engineer-in-Charge.

Returning filling in trenches, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as directed. ( Surplus soil if any shall not be removed but left proud over the trench) complete all as specified and directed.

Supply and fix Galvanized steel water tubing, medium grade of 25mm bore , screwed and socketed joints with and including all required fittings as in trenches, floors, on walls etc complete all as directed

Supply and fix Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed of 25 mm dia complete all as specified and directed by Engineer-in-Charge.

Supply and fix Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed of 20 mm dia complete all as specified and directed by Engineer-in-Charge.

M&L Construction of valve chamber of size 90 x 90 x 90 cm (internal) with sub Class 'B' bricks straight or curved or plan exc 6 mtr mean radius built in CM 1:6 PCC 1:3:6 in foundation, 15 mm thick plaster in CM 1:4 on internal faces of walls, 40 mm thick, PCC 1:2:4 in floors including valve pit cover made out of MS sheet 3.15mm thick with angle iron 50x50x6 mm frame with fixing hinges, locking arrangements, hold fasts and handle etc duly painted with two coats of synthetic enamel paint over a coat of red oxide primer including necessary excavation & earth work complete all as specified and directed.

Excavation in trenches not exceeding 1.5 mtr wide but exceeding more than 1.5 m in depth but n exc 3.0 m in depth

Taking up or down worn out/ damaged / partly serviceable/unserviceable PVC insulated underground cable, armoured, heavy duty with aluminium conductors of size 10 sqmm x 4 core,1100 volt grade from duct/pole/wall/roof tops etc, testing of cable in the presence of Engr-in-charge to ascertain seviceability,seggregating serviceable and unserviceable cable, keeping aside serviceable cable in safe custody for reuse complete all as specified and directed .

All as per item No. 110 here-in before but cable of size 4 core 16 sqmm.

Supply,laying, commissioning and testing or passing through pipe, XLPE insulated, armoured, electric power UG cable (Heavy duty) with aluminium conductor, 1100 volts grade in duct / trenches for small length for extension/replacement of the defective cable of nominal cross sectional area 10 sqmm 4.0 core including brass compression cable gland, terminal aluminium lugs etc making connection and testing complete all as specified and directed. Note :-(i) Pipes and bricks for protection, mild steel clamp nut and bolts sand cushioning shall be measured and paid separately.

All as per item No. 112 here-in before but for cable of size 4 core 16 sqmm.

All as per item No. 112 here-in before but for cable of size 3.5 core 25 sqmm.

All as per item No. 112 here-in before but for cable of size 3.5 core 35 sqmm.

All as per item No. 112 here-in before but for cable of size 3.5 core 50 sqmm.

All as per item No. 112 here-in before but cable of size 3.5 core 70 sqmm.

All as per item No. 112 here-in before but cable of size 3.5 core 95 sqmm.

M&L for Dismantling of ACSR conductors after unbinding from insulators Note:- (i) Total no of conductors in over head line to be taken down shall comprise a maximum of three phase, one neutral ,one street light/security light for measurement length of each conductor shall be taken separately, All as specified and directed by Engineer in Charge.

Taking down old/unserviceable insulators any type (Pin/shackle type) from LT poles including nut and bolts and MS clamps. Complete all as specified and as directed by Engr-In- charge.

Demolition of concrete of any description and in any position not otherwise specially provided for complete all as directed by Engineer-in- Charge

M&L for PCC 1:2:4 type B-1 (using 20 mm graded broken stone aggregate) as in mass concrete in foundations etc complete all as specified and directed .

Material and labour for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate for coping around the pole strut above ground level, foundation of stay etc. including neccassory form work and finishing the surface fair and even without using extra cement all as directed and specified

M&L cable jointing kit for 1100 Volt grade cable heat shrink type joint complete with jointing meterial and ascessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 70 sqmm to 150 sqmm all as directed and specified

Supply,laying,galvanised steel tubing light grade complete with all fitting of size 50 mm dia for cable protection along with pole across road etc. Complete all as specified and directed by Engr-in-Charge.

Suppy and fix rigid non-metallic PVC conduit 20 mm dia exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. Complete all as specified and as directed.

Supply and fixing street light junction box of size 300 mm x 200 mm x 105 mm, made out of FRP sheet with weather proof hinged door including self locking arrangement, outdoor type weather and vermin proof complete comprising of insulated / high quality PVC sleeves aluminium bus bar of capacity 63 Amps 04 Nos (three phase RBY and black for neutral) with and including 6 Amps MCB single pole, single phase 230 volts, including 25 x 3 mm flat iron mounted on insulators, having arrangement of connecting incoming and outgoing cables complete and all as specified and directed.

Supply and fixing PVC insulated round/flat copper cable of size 3 core, 1.5 Sqmm for connection of LED lights from FRP junction box to street light fitting complete all as specified and directed.

M & L for Earthing complete with galvanized earth plate electrode 60 cm x 60cm x 6mm thick buried directly in ground to the depth of not less than 2.25 mtr below ground level with top edge of earth plate or a depth not less than 1.50 m below ground level connected to GI strip 32 x 6mm as earth lead by means of galvanized bolts, nuts check nuts and washers and necessary excavation and earth work PCC 1:2:4 type B-1 using 20mm graded brick aggregate for earth pit PCC cover , charcoal & common salt filled in alternate layers funnel with 20 mm bore light grade watering pipe, 40mm dia GI pipe light grade for protection of GI strip, wire mesh and connected to earth point including testing on all as specified and shown in electric plate No 3 of SSR part I.

Supply and fix wall mounted bus bar chamber of rating 200 amps , 3 phase , 415 Volts step type, made of thick CRCA sheet, protected with seven tank phosphating process and power coated to prevent from corrosion. Silver plated copper strips are fitted in steps for easy cable connection, thick hylam sheet fitted at bottom of enclosure and embossed earthing identification provided on both sides of enclosure. Complete all as specified and as directed.

M&L Taking down interlocking/paver block tiles of any size and any description and relaying after laying of cables, GI pipe in all respect including preparation of surface and matching with existing surface complete including necessary sand filling and PCC if required, all as specified and as directed. Note:- Sand and PCC will measured and paid separately

Supply and fixing LT cable route indicator of mild tseel not less than 150mm dia fixed through welding angle iron support of size 30 mm x 30 mm x 5 mm thick, 50 cm long including two coats of synthetic enamel paint over a coat of red oxide primer along LT trench including fixing in ground with PCC (1:3:6) type C1 of block size 30 cm x 30 cm x 40 cm complete all as specified and directed by Engineer-in-Charge.

Jawandha Enterprises (BID ID -3209395)

Buttar Construction Co. (BID ID -3209310)

AR CONSTRUCTIONS (BID ID -3209215)

SWAMI ENGINEERS (BID ID -3209467)

Arneja Builders (BID ID -3205419)