REPAIR MAINT OF UNSV INTERNAL ELECTRICAL FITTINGS FIXTURES INCL REPLACEMENT OF UNSV WIRING REPLACEMENT OF UNSV VARIOUS LIGHT FITTINGS FIXTURES SUBMAIN WIRING MCBS MCCBS DBS AND VARIOUS TYPES OF CEILING FANS EXHAUST FANS GEYSER AND CONNECTED MISC INTE

Amount

Taking down carefully copper/aluminium point wiring (light/fan/socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc including making good the disturbed surfaces to match with the existing complete

M&L for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable connected to common earth and earth dolly with suitable copper lugs drawing into and including rigid non-metallic PVC conduit/casing caping surface/exist conduit of 20mm dia or higher, medium grade complete with all PVC conduit accessories,GI metal flush box suitable for modular/conventional type switches/sockets/fan regulators with cover plates, blanking plates, brass screws, cup washers etc including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified and directed for the followings :- (Note: Rates deemed to be included for GI metal flush box, laminated sheet top cover/modular cover inner and outer plate covers, blanking plates etc complete).

One light point controlled by one switch

One ceiling/exhaust fan point controlled by one switch

One socket outlet 5 Amps controlled by one switch on same board

One socket outlet 5 amps controlled by one switch on independent board

One bell point controlled by one bell push switch

One light point controlled by two two way switch

All as per above item but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 16 Amps socket outlet point on independent board with 1.5 Sqmm nominal cross sectional area copper conductor cable as continuous earth wire.

All as per above item but wiring with 4 sq mm PVC insulated multi-stranded copper conductor for industrial socket outlet 3 pin 16 / 20 Amps point and one single core 2.5 sq mm PVC insulated unsheathed copper cable as earth continuity conductor

M&L for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable connected to common earth and earth dolly with suitable copper lugs drawing into and including rigid non-metallic PVC conduit of 20mm dia or higher, medium grade, concealed type complete with all PVC conduit accessories,GI metal flush box suitable for modular/conventional type switches/sockets/fan regulators with cover plates, blanking plates, brass screws, cup washers etc including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified and directed for the followings :- (Note: Rates deemed to be included for GI metal flush box, laminated sheet top cover/modular cover inner and outer plate covers, blanking plates etc complete).

One light point controlled by one switch

One ceiling/exhaust fan point controlled by one switch

One socket outlet 5 Amps controlled by one switch on same board

One socket outlet 5 amps controlled by one switch on independent board

One bell point controlled by one bell push switch

One light point controlled by two two way switch

All as per above item but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 16 Amps socket outlet point on independent board with 1.5 Sqmm nominal cross sectional area copper conductor cable as continuous earth wire.

All as per above item but wiring with 4 sq mm PVC insulated multi-stranded copper conductor for industrial socket outlet 3 pin 16 / 20 Amps point and one single core 2.5 sq mm PVC insulated unsheathed copper cable as earth continuity conductor

S&F in replacement of concealed metal box 06/08 modules having high durability,corrosion resistant,earthing terminal with repalcement of 3 mm thick plastic laminated hylam sheet top cover with brass screws , cup wahser and cutting of grooves for switchs,sockets and regulator etc including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified and directed.(Note: Switch,sockets,regulators to be measured and paid separately)

All as per above item description but 03/04 modules complete.

All as per above item description but 01/02 modules complete.

S&F in replacement of concealed metal GI box 12/16 modules suitable for modular cover plates having high durability,corrosion resistant,earthing terminal with repalcement of modular type inner and outer plate covers with screws,incl all cutting/chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified and directed. (Note:1. Rates deemed to be included for removing and refixing of electrical point connections in switch board complete. 2. Modular switch,sockets,regulators,bell push to be measured and paid separately)

All as per above item description but 06/08 modules complete.

All as per above item description but 03/04 modules complete.

All as per above item description but 01/02 modules complete.

S&F in repairs Switch piano flush type 5/6 Amps single pole one way 230 Volts complete

S&F in repairs Switch piano flush type 15/16 A single pole one way 230 Volts complete

S&F in repairs Socket Outlet 2 in 1, 3 pin 5 Amps flush type 230 Volt complete

S&F in repairs Socket Outlet 2 in 1, 3/6 pin 5 and 15 Amp flush type 230 Volts complete

S/F in repairs Bell push, flush type 5 Amps 230 Volts complete

S&F in repairs electronic fan step regulator flush type 120 watt, 230 Volt complete

S&F in repairs ding dong bell, AC, 230 volts, single pole complete

S&F in repairs lamp holder, 230 volt AC, PVC / Polycarbonate type of angular shape with back plate suitable for batten fittings complete

S&F in repairs ceiling rose, 6 Amps, 250 volts, AC with three terminals and PVC / Polycarbonate insulated body of 50 x 25mm size complete.

S&F in repairs modular switch 6 Amps, one way, one module 240 volts complete

S&F in repairs modular socket, 3 pin 6 Amps,240 volts, 2 module complete

S&F in repairs modular switch 16 A, 1 module,240 volts complete

S&F in repairs modular socket 6/16 A, 5 pin, 2 module, 240 volts complete

S&F in repairs modular Bell push 6 Amps, one module 240 volts complete

S&F in repairs modular fan regulator, step type, 120 W, humfree, AC, 230 volts, 2 module complete

S&F in replacement of glass cover for sketch type wall fittings complete all as specified and directed.(Make as per sample)

Supplying and laying in replacement or fixing or passing through pipe, 1100 volts grade PVC insulated aluminium stranded conductor cable served with inner sheathing of 6 sqmm PVC tape and overall PVC sheathed in service connections one twin core cable flat or circuler complete.

S&F in repair of hylam sheet cover with brass screws , cup wahser and cutting of grooves 06/08 Modules for switchs,socket and regulator etc complete.

All as per above item description but 03/04 modules complete.

All as per above item description but 01/02 modules complete.

S&F in repairs of rigid non metalic 25mm dia PVC conduit with all ftgs(tees,bends,elbows,reducers, bell mouth,saddles,pipe hooks) complete.

S&F in repairs of GI flexible conduits 25mm dia with check nut and clamps and accessories complete.

S&F in repairs for MCB 40 amps FP with 30 mA, 10 KA, ELCB,IP 20, Dual on position DIN clip type with metal sheet elclosure box complete all as specified.

Supply and fixing of display board made up with acrylic sheet of size 200mm x 100mm with engraving the mobile Nos. of Contractor,Lift attendant/Rescuer, OEM AMC rep,JE E/M and AGE E/M with lettter size 10mm in height. The mobile number should be of fluorescent colour/ radium paint which will be visible in dark place (in case of power failure) as well in day light, display board should be tempered proof complete in lift cabin all as specified and directed.

Supply and fixing of 300mm sweep car cabin fan in lift with necessary accessories such as fins/ grills, nuts, bolts and wires, etc.including taking down old unserviceable fan complete all as specified and directed.

Supply and fixing in repair of 300mm dia, 900 RPM, exhast fan witlh louvers including frame, blades complete and UNSV Ex fan deposit in E/M store yard.

Supply and fixing in repair of 300mm dia, 900 RPM, wall mounting fan oscalating type complete and UNSV fan deposit in E/M store yard.

Supply and fixing in repair of 200mm dia, 900 RPM, fresh air fan with plastic louvers incl frame complete. Make: Bajaj/ Crompton Greaves /Havells

S & F LED Batten type fitting for surface/wall mounted 20/22 W,230V,6500K integrated electronic driver completely pre wired, LED 4 feet fitting with polycarbonate housing & integrated electronic driver complete with connector blok, screws , gutties etc.and removing the UNSV fitting and all as specified and directed.

S & F LED Batten type fitting for surface/wall mounted 9/10W,230V,6500K integrated electronic driver completely pre wired, LED 2 feet fitting with polycarbonate housing & integrated electronic driver complete with connector blok, screws , gutties etc.and removing the UNSV fitting and all as specified and directed.

S&F surface/recessed type LED panel type 36W,230V complete with driver full window glarefree opal diffuser LED panel of size 2ftx2ft with CRCA powder coated white housing, CDL/warm type illumination complete with all accessories required for connection and making good the disturbed any type of ceiling and remove the UNSV fittings and all as specified and directed.

S&F indoor decorative wall light fixture suitable for 10 W LED lamp,230V for soft light ambiance, made up of polycarbonate, spiral B22 base lamp holder used,globe shape, incl LED lamp 10W(warm/CDL type) and remove the UNSV fittings and all as specified and directed.

S&F lighting fixture wall mounted LED bulk head luminaire 9/10W,230V, made of die cast aluminium with opal diffuser IP 65, complete with mounting Brackets & accessories as required with connections and remove the UNSV fittings and all as specified and directed.

Supply and fixing Indoor recessed/surface type mounted LED luminaires round/square type light weight plastic body downlight fitting 15 Watt, CDL/Warm type with all accessories 3 core copper wire for connection, making good the disturbed any type of ceiling and remove the UNSV fittings and all as specified and directed.

Supply and fixing Indoor recessed/surface type mounted LED luminaires round/square type light weight plastic body downlight fitting 5 Watt, CDL/Warm type with all accessories 3 core copper wire for connection, making good the disturbed any type of ceiling and remove the UNSV fittings and all as specified and directed.

S&F, testing and commissioning of common area lighting panel for high rise buildings, with contactor, analog time switch, MCB rating 40 A suitable for 3 Phase 415 Volts and having over and under voltage protecction relay to protect the contactor coil, with panel locking facility, wall mounted type incl necessary cable lugs, necessary copper wirinng to connect exist TPN DB with remove UNSV DB/panel complete all as specified and directed.

S&F for LED Based Outdoor Weatherproof Aviation Obstruction Lighting Luminaire 6W connections, necessary welding, clamping,mounting with 32mm dia GI pipe, 1.2 mtr height,1.5 sqmm copper wire with 20mm PVC conduit fixing on work portions upto nine storeys height bldg incl taking down UNSV complete all as specified and directed.

M&L in repair for two single core (submain) PVC insulated cable with 4 sqmm nominal cross sectional area 1100 V,stranded copper conductor, multistranded, and one single core green PVC insulated 2.5 sqmm stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit 20 mm dia concealed in wall including all conduit and fixing accessories including cutting chases & making disturbed surfaces complete

All as per above item herein before but with 6 sqmm two runs and 4 sqmm one run as earth wire

All as per above item herein before but with 10 sqmm two runs and 6 sqmm one run as earth wire

All as per above item herein before but with 4 sqmm four runs and 2.5 sqmm one run as earth wire

S&F MCB DB, single pole and neutral with 200 Amps rated bus bar, 230 volts, glazed, double door type, 4 way IP-43, including connecting all connections of wire to MCBs with proper lugs & making good to the disturbed surface complete.

All as per above but 8 way

All as per above but 12 way

S&F of factory made distribution box 4 way, AC, TP & neutral metal enclosure, Glazed double dooor, 415 V, AC, concealed type with suitable bus bar, neutral link, earth link suitable complete

S&F of factory made distribution box 8 way, AC, TP & neutral metal enclosure, Glazed double dooor, 415 V, AC, concealed type with suitable bus bar, neutral link, earth link suitable complete

S&F of loadline distribution box 4 way, AC, TP & neutral metal enclosure, Glazed double dooor, 415 V, AC, concealed type with suitable bus bar, neutral link, earth link suitable for MCCB 63/100 Amps as incomer and MCB SP as out going complete

S&F of loadline distribution box 8 way, AC, TP & neutral metal enclosure, glazed double dooor, 415V AC, concealed type complete with suitable bus bar, neutral link, earth link suitable for MCCB 125/160 Amps as incomer and MCB SP as out going all as directed.

S&F in repairs for MCB TPN, 240 Volts, AC, 40/63 amps, breaking capacity 10 KA, 'C' curve and connection by using suitable copper lugs complete

S&F in repairs for MCB, DP/SPN, 240 Volts, AC, 16 to 63 Amps of breaking capacity 10 KA, 'C' curve and connections by using suitable copper lugs complete.

S&F in repairs for MCB SP, 240 Volts, AC, 6 to 32 amps, breaking capacity 10 KA, 'C' curve and connection by using suitable copper lugs complete

S&F in repairs for MCCB 2 Pole, 240 volt, AC, fixed type,32 Amps, 16 kA, suitable for load line DB/LT PB connection complete.

S&F in repairs for MCCB 4 Pole, 415 volt, AC,63 amps,fixed type,suitable for load line DB/LT PB connection complete.

All as per above item but 100 amps, 25 kA

All as per above item but 125 amps, 25kA

All as per above item but 200 amps, 25kA

S&F in repars for blank plates for MCB space in any type of DBs complete

S&F bldg security light LED luminaries with low wattage with pressure die cast aluminium housing, with heat resistant thoughened glass & IP 65 protection and 25 Watt with suitabe size GI pipe bracket,clamps incl taking down old unserviceable one all specified and directed.

S&F security light LED luminaries with low wattage with pressure die cast aluminium housing, with heat resistant thoughened glass & IP 65 protection and 45 Watt with suitabe size GI pipe bracket,clamps incl taking down old unserviceable one all specified and directed.

S&F in repairs for LED type IP 66, bush light with die cast aluminium having with toughened glass 9 W incl fixing arrangements complete all as specified and directed.

S&F in reapirs of garden light fitting 10 watts, IP65 rated Inverted Pyramid Tripod type LED Bollard with soft 360 deg light distribution with tapping from nearest electrical point incl provn of copper wire, PVC conduit,necessary brick/PCC work finishing with fair cement for base fitting all as specified and directed.

S&F in repairs for decorative LED post top fittings 25W Ruby Clear/Coral opal type IP 65 including with all accessories complete along with after taking down old unserviceable one all specified and directed.

Takinng down loose and rearrange/refixing of perforated GI cable tray and refixing properly (150/300 x 50 x 2 mm) including horizontal and vertical bends, reducers tees, cross members and other accessories as required and duly suspended or wall fixed from the ceiling etc suitable to accommodate PVC copper cables/PVC conduits with anchor, fasteners , mounting brackets, suspension rods complete all as specified and directed. (Note: Rates deemed to be included for removing of exist loose/hanging cables/conduits and rearrangement of complete in cable trays complete as per site requirement)

Repair of earth pit incl required exacavation, earth work and PCC work to make good damaged/disturbed surfaces of earth pit chamber & making new pit cover of RCC 1:2:4 type B-1 using 20mm graded stone aggregate reinforced and lifting handle on RCC cover with 8 mm MS bars at 150 mm centre to centre both ways incl supply & fixing of wire mesh and funnel including re-connection of earth wire/strip with panel/transformer using GI nut, bolts & washer complete all as specified & directed

Material & labour for earthing with Galvanised Steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanised iron wire of size 4mm dia as earthing lead (upto the body of the equipment) by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and protected by light grade 40mm dia GI pipe connected to main switch board or main control board and GI pipe medium grade 20mm bore for watering and including funnel , wire mesh , RCC pit cover and PCC chamber pit with PCC (1:3:6) type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type of soil , returning , filling in approved soil and disposal of surplus soil to a distance not exceeding 50m all as specified and shown in electrical plate No 5 of SSR 1991(Part-I) complete all as directed.

Taking down ceiling fan of any sweep by unscrewing nut/bolts from its position and fixing the same to its original place after necessary cleaning, oiling, greasing, replacement of defective parts bush, bearing, condenser,flexible connection wire,down rods, canopies,minor spares,painting and re-winding all as specified and directed. (Note : Rubber Bush, Gun Metal Bush, bearing,capacitor, twin core twisted copper flexible wire, down rods, canopies, winding and paintng are measured and paid separately as supply only rates and fixing charges for spare parts shall deemed to be included)

Rewinding of burnt winding from the stater of the ceiling fan any sweep with matching gauge and turns of super enamelled copper wire leathenic paper, glass sleeves etc including varnishing,heating the windings as per manufacturer design and reassembling the same complete testing all as specified and as directed.

Painting of ceiling fan with set of blades of any sweep complete with one coat of 1st grade quality synthetic enamel paint by spraying including preparation of old painted surfaces to remove any type of sticky dust, oil marks etc and filling cavities with fillers and writing letters and numbers complete all as specified and as directed.

Taking down Exhaust/Ventilation fan of any sweep by unscrewing nut/bolts from its position (high rise bldgs up to 8 storey height) and fixing the same to its original place after necessary cleaning, oiling, greasing, replacement of defective parts bush, bearing, condenser,flexible connection wire,louvers,shutters,painting,minor spares and re-winding all as specified and directed. (Note : Rubber Bush, Gun Metal Bush, bearing,capacitor, ventilation fan motors,twin core twisted copper flexible wire, Louvers,shutters, winding and paintng are measured and paid separately as supply only rates and fixing charges for spare parts shall deemed to be included)

Rewinding of burnt winding of the Exhaust fan up to 300 mm dia with matching gauge and turns of superenamelled copper wire leathenic paper, glass sleeves etc including varnishing,heating the windings as per manufacturer design and reassembling the same complete testing all as specified and as directed.

All as per above item but 380/450mm Sweep.

Painting of exhaust fan of any sweep complete with one coat of 1st grade quality synthetic enamel paint by spraying including preparation of old painted surfaces to remove any type of sticky dust, oil marks etc and filling cavities with fillers and writing letters and numbers complete all as specified and as directed.

Taking down pedestal/wall mounted fan of any sweep by unscrewing nut/bolts from its position and fixing the same to its original place after necessary cleaning, oiling, greasing, replacement of defective parts bush, bearing, condenser,if any spares,flexible connection wire and re-winding all as specified and directed. (Note : Bush, bearing,capacitor, twin core twisted copper flexible wire and winding are measured and paid separately as supply only rates and fixing charges for spare parts shall deemed to be included)

Rewinding of burnt winding from the stater of the pedestal/wall mounted fan any sweep with matching gauge and turns of superenamelled copper wire leathenic paper, glass sleeves etc including varnishing,heating the windings as per manufacturer design and reassembling the same complete testing all as specified and as directed.

Supply only for ball bearing number of 6201 to 6204 as required.

Supply only for rubber bush for shackle with bolt, nut and lock pin suitable for ceiling fan .

Supply only for PVC holder for condenser housing.

Supply only for twin twisted copper flexible wire size of up to 0.5 sqmm.

Supply only capacitor 0.8/1 Mfd, 240 Volts.

Supply only capacitor 2.5 Mfd, 240 Volts.

All as per above but 3.15/4 Mfd.

Supply only PVC canopy for ceiling fan

Supply only down rod for ceiling fan 1' length, down rod colour match with exist fan to any height complete all as directed.

All as per above but 2' length.

Supply only for ventilation fan motors suitable for 200/250mm sweep complete.

M&L for 50x6mm thickness MS strip with nut,bolt and washers suitable for fixing of ceiling fan and all as specified and directed.

M&L in repair for GI tubing 40 mm bore (medium grade) for fixing of ceiling fans and make good the disturbed wall surface and all as specified and directed.

M&L for ceiling fan blade suitable for 1200mm sweep for complete.

All as per above but 1400 mm sweep.

S&F in replacement louvers with shutter metallic body suitable for single phase 240 Volts AC heavy duty exhaust fan upto 450 mm sweep with necessary fixing accessories after taking down existing all as specified and directed. NOTE: Louver Shutter are to be replaced up to high rise bldgs 8 storey including all necessary T&P and fixing accessories etc.

S&F in replacement louvers with shutter plastic body suitable for single phase 240 Volts ventilation fan 200 mm sweep with necessary fixing accessories after taking down existing all as specified and directed. NOTE: Louver Shutter are to be replaced up to high rise bldgs upto 8 storey, including all necessary T&P and fixing accessories etc.

M&L for exhaust fan blade (metal body) suitable for 300/380/450mm sweep for exhaust fan complete all as directed. (Make as per sample)

M&L for ventilation fan blade (PVC type) suitable for 200mm sweep complete all as directed. (Make as per sample)

M&L for wall/stand fan blade (PVC type) suitable for 300mm sweep complete all as directed. (Make as per sample)

Taking down carefully electric geyser of any type and capacity by disconnecting electric and water supply connection, opening nut, bolt, washer and replacing the defective parts. descaling with acid washing and reassembling after cleaning and replacing defective parts and re-installing the same in original position with fastner nut and bolts and making necessary electric and water supply connection and testing complete all as specified and directed. (Note: Spare items shall be measured and paid seperately as supply only under relevant items)

Supply only geyser inner water tank 25 Ltrs capacity steel body with nut and bolts as per sample ,duly tested complete all as specified and directed.(Make- as per sample)

Supply only of Heating element capacity 1.5/2KW (Round/Triangular) ISI marked suitable for geyser (as per sample) complete all as specified and directed.Make : as per sample

Supply only thermostat suitable for 25 ltrs capacity geysers as per sample.

Supply only Heavy duty hot water connection, SS rope threaded type with brass unions, neoprene washers at both ends, 45/60cm long 15mm bore complete.

Supply only cold water connection, PVC connection with brass unions,neoprene washers at both ends, 45/60cm long 15mm bore complete.

Supply only replacement of safety valve/Pressure release valve for geysers of any type/capacity.

Supply only indicator lamp Red/Green suitable for geyser geysers of any type/capacity.(Make as per sample)

Supply only geyser base plate/apparatus assembly of any capacity any model all as specified and directed complete. Make as per sample.

Supply only geyser top and bottom cover any capacity any model all as specified and directed complete. Make as per sample.

S&F in replacement of glass wool heat resistance thermal type/heavy duty puf insulation glass wool of exist type (8 kgs) for 25 ltrs capacity geysers complete.

S&F in replacement of outer cover MS sheet/ABS body of geysers 25 Ltrs capacity complete all as specified and directed.

M&L soldering/brazing inner geyser tanks 25 liters capacity with brass solder and refixing after testing the leakage complete incl replacement of rubber packaging ring heat resistance type all as specified directed complete.

M&L in repair for Delux stepped type electronic fan regulator flush type, ISI marked on the existing phenolic laminated sheet etc all as specified and directed.

M&L in repair for modular fan regulator, step type,ISI marked complete all as directed.

M&L in replacement of Plug top, 3 pin, 05 amps, 230 volt.

M&L in replacement of Plug top, 3 pin, 15 amps, 230 volt.

S & F in repair sheet metal enclosure with Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB with 20 Amps.

S & F in repair industrial type two pin and earth plug top 20 Amps complete.

S & F in repair industrial type two pin and earth plug top base assembly 20 Amps complete.

S&F in repairs for MCB SP, 240 Volts, AC, 16/20 amps, breaking capacity 10 KA, 'C' curve complete

Sch of Credit- Total contract sum shall be calculated after deduction of Sch of Credit amount Credit amount - 90,356.00

NEETU TRADERS (INDIA)

Shiv Enterprises

M/s S.G. BUILDERS

M/s Amit Brothers

Surjit and Sons