ELECTRIC WORK

Amount

fo|qr forj.k [k.M&[kqtkZ] ds vUrxZr iw.kZ tek ;kstuk esa 33@11 dsoh fo|qr midsUnz ua0&4 ls fuxZr 11dsoh vkS|ksfxd iks"kd ds vUrxZr ve`r Hkkjr LVs'ku ;kstuk esa [kqtkZ jsyos LVs'ku gsrq u;s Hkou ds fuekZ.k ,oa jsyos ifjlj esa ck/kd ,pVh@,yVh vksoj gSM ykbZu dks vUMjxzk.mM djus dk dk;ZA

Carriage of fallowings from ESC. to pit site on kachcha pacaa road including loading and unloading chagres at both ends, rcquricd for proper completion of work, distance about to 60 Kms.

S.T Pole 11 Mtr. Long.

11 KV XLPE Cable 3x120 Sqmm.

LT XLPE Cable 3.5x150 Sqmm.

Carriage of All line Material from store center to j.e store Sub station as ACSR Weasel conductor, ABC conductor GI Wire, Earth Wire. M.S. Chanel, Angle, Stay & Earthig Rods, Barbed Wire. Disc Insulator etc.

Erection of Single pole support including complete 1 IT fittings as per RESPO manual and as per direction of Engineer in charge including the cost of labour, T&P and carrier etc. required for proper completion of work.

Erection of Double pole/Scation Pole support including complete 1 IT fittings as per RESPO manual and as per direction of Engineer in charge including the cost of labour, T&P and carrier etc. required for proper completion of work.

Grouting of Single support shall be grouted with cement, sand and birck ballast/stone ballast in ratio 1:4:8 =30x3030 cms. including the cost of cement, sand, birck ballast/stone ballast, etc. as per actual size requirement, as per RESPO manual and as per direction of Engineer in charge including the cost of labour, T&P and carrier etc. required for proper completion of work.

Grouting of Double pole support shall be grouted with cement, sand and birck ballast/stone ballast in ratio 1:4:8 =30x3030 cms. including the cost of cement, sand, birck ballast/stone ballast, etc. as per actual size requirement, as per RESPO manual and as per direction of Engineer in charge including the cost of labour,

Carriage of All line Material from J.E store Sub station to Pit Site ACSR Weasel conductor, ABC conductor GI Wire, Earth Wire. M.S. Chanel, Angle, Stay & Earthig Rods, Barbed Wire. Disc Insulator etc.

Cutting /drilling /Welding of MS Angle iron for making guarding angle size 65x65x6/50x50x6 mm including the work of fixing the bracket on PCC/ST pole for construction of the line.

Making/Filling of 11 Kv Cable Jointing kit Varius Size XLPE cable

Laying Of HDPE Pipe Od-140 MM Dia-4 PE Through HDD Method Trenchless On Road.

Laying Of HDPE Pipe Od-140 MM Dia-4 PE Through HDD Method Trenchless On Road.

fixing of 11 Kv Stay rod with Stay wire in proper way with Nozelling

Grouting of 11 Kv Stay rods

Laying, sagging. Stringing and binding and jumpering of 11 Kv XLPE cable 3*120 Square MM & Outher size newly erected pole as per RESPO manual and as per direction of supervising engineer. It includes the cost of labour, T&P, carrier etc. requried for proper completion of work.

Laying, sagging. Stringing and binding and jumpering of LT XLPE cable 3.5*150 Square MM & Outher size newly erected pole as per RESPO manual and as per direction of supervising engineer. It includes the cost of labour, T&P, carrier etc. requried for proper completion of work.

Laying, sagging. Stringing and binding and jumpering of LT XLPE cable 3x185 Square MM & Outher size newly erected pole as per RESPO manual and as per direction of supervising engineer. It includes the cost of labour, T&P, carrier etc. requried for proper completion of work.

Fixing of Earthing rod

Fixing of pin insulator

Fixing of G.I Pipe 6" FOR Cable Entry.

Fixing of Toff Channel

Fixing of Sub station Angle.

The folloing material is required to be supplied by the contractor.

Holding clamp.

11Kv Cable Jointing kit 3*120 Square mm XLPE cable

Double Pole clamp

F Clamp

Earth clamp

Stay clamp

G.I Pipe 6" FOR Cable Entry.

Stay insulator for 11 Kv

HDPE Pipe Od-140 MM Dia-4 PE.

Distribution Box.

Bolt & nut off size.

NEHA ENTERPRISES

Vivek Electricals