REPAIR TO FALSE CEILING , WALL PANELLING , ALUMINIUM PARTITION , DOOR AND WINDOW ,JOINERY WORK IN ZONE -II UNDER GE (A) JAISALMER

Amount

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S & F Joist, channel, angel or tee sections, fixed independently , without connecting Fe-410-W(Gde-E-250) plates etc. (cut to ordinary lengths i.e. within 20mm of the length indicated)

M&L for New framed work as in doors or gates of angle Fe-410 W ( Gde-E-250) quality B or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

S&F Rolled mild steel in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. of Fe-410 W ( Gde-E-250) quality B

M & L for preparation of new or previously untreated surfaces including two coat of synthetic enamel (ordinary tint) paint over priming with red oxide,zinc of any description, over 10cm in width or girth, not otherwise described

Dismantling (AC corrugated , semi corrugated etc ) AC sheets in roof coverings complete all as specified & directed by Engineer in charge.

S&F Pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet/ semi corrugated 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws as specified.

Demolition of brick work or pcc block or stone/ boulder masonery built in cement mortar including all quoins arches, pillers etc all as specified and directed by Engineer-in-charge.

M&L for squared rubble walling, Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) all as specified & directed by Engineer-in-charge.

Ditto - as per item No 09 above, but except stone

Extra over stone walling for hammer dressing to face stones with maximum depression on face from straight edge not exc 20mm and dressing face beds and joints as specified to squared rubble walling, Jodhpur type brought upto courses.

M & L for precast cement concrete solid block masonry exc 10cm in width and setting in CM 1:6 type C1, 1:3:6 all as specified.

Taking down cement plaster on brick or stone wall surfaces, etc including raking out joints, hacking for key, scrubbing down with water, complete all as specified & directed.

Material and labour for 15 mm thick rendering in cement mortar 1:6 on fair faces of stone masory surfaces or concrete surfaces finished even and smooth without using extra cement complete all as specified.

Material and labour for 15 mm thick rendering in cement mortar 1:4 on fair faces of stone masory surfaces or concrete surfaces finished even and smooth without using extra cement.

M&L rendering 15mm thick in 1:6 cement plaster on fair faces of brick work or concrete surfaces is to be finished even and smooth (without using extra cement) complete all as specified and directed.

M&L rendering 15mm thick in 1:4 cement plaster on fair faces of brick work or concrete surfaces is to be finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall externally and applying two coat of cement base paint over a coat of primer complete all as specified.

Preparation of new surfaces of walls and applying two coat oil bound distempering over a coat of chalk whiting complete all as specified.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M&L for 75mm thk cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in subbase of flooring/hard standing as specified

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete.

M& L plain cement concrete 1:2:4 type B 1 using 20mm graded stone agregate cast in situ kerb stone ,copings, bed plates ,water through and the like including wethering, slightly rounded or chamfered angles and throating including use of form work (straight or curved ) complete all as specified and as directed by Enginneer in charge

S & F in repair Bib tap cast copper alloy fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm dia

S & F in repair 20mm stop cock cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends or for unions etc

S & F in repair 15 mm Stop valve fancy type cast copper alloy chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed

S&F in repairs Viteous China squatting pan, Orrissa, pattern, size 580 x 440 mm white with integral foot rest (excluding flushing cistern and flush pipe) all as specified & directed.

S&F in repair European type water closet,including plastic seat cover white, closed pattern with flat bottom and mild steel chromium plated or aluminium hinging device complete.

S & F in repair PVC valveless, syphonic action type flushing cistern, low level, white,with inlet, ball valve, float and handle 10 ltrs capacity incl brackets

S & F in repairs plastic EWC seat cover, coloured closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device complete

S & F in repair vitreous china wash basin white flat back size 550x400mm excl chain and plug and porcelain stopper but incl CI bracket etc complete

S & F Pillars taps fancy type cast copper alloy fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm dia fixed

S & F 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end

S&F in repair gun metal globe or gate valves with iron wheel head screwed both end for iron pipe and fixed to 20 mm bore pipe.

S&F in repair Towel rail 600 mm long of CP brass fixed with and including chromium plated brass screw and wooden/plastic cleats (minimun weight 190 gms)

S&F in repair PVC connection 450mm long and 15 mm dia with brass fly nut at both ends complete.

S&F in repair Vitreous china urinal ,half stall type ,complete incl providing and fixing plugs bedding urinal against wall in CM1:4 securing urinal to plug with and incl 60mm long brass screws ,pointing around urinal back in cement ,incl grating union for discharge pipe etc.

S & F in repair looking mirror 600x450mm with PVC sheet frame and back supported with 6mm thick AC building board or plywood sheet complete all as directed by Engr-in-Charge

Taking up or down steel tubing and connections 15 mm bore complete all as specified and directed.

S & F Galvanised mild Steel water tubes,15 mm bore with all fittings, 'medium grade', ISI marked, galvanised, fixed to walls and ceiling or laid in floors complete all as specified and directed.

Taking up or down steel tubing and connections 20 mm bore complete all as specified and directed.

S & F Galvanised mild Steel water tubes, 20 mm bore with all fittings, 'medium grade', ISI marked, galvanised, fixed to walls and ceiling or laid in floors complete all as specified and directed.

Dismantling water tanks and removing to store (exc500 and not exc 1000 ltr cap)

Dismantling water tanks and removing to store (exc 250 and not exc 500 ltr capacity)

S & F for rotational moulded polythene water storage tank (cylindrical vertical with closed top, white colour ) hoisted and fixed in position all as specified in SSR part I capacity of tank 500 ltrs complete

-Ditto- All as per above item 45 but 1000 ltr capacity.

S & F for 20 mm ball valve, high pressure of PTMT with epoxy coated with Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 2 0 m m - 2 1 0 g m s ) complete all as specified..

Taking down Chowkhats or frames exc. 1.5 sq. m but n.exc 4 sqm each with shutter (without taking off shutters from the frames) complete all as specified.

Taking down Chowkhats or frames with shutter (without taking off shutters from the frames) not exc. 1.5 sq. m each complete all as specified.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified.

S&F Butt hinges 100 mm size medium weight cold rolled mild steel and fixed

Supply and fixed aluminium handles, cast type, anodised 125 mm size complete all as specified.

S&F 150 mm aluminium anodised barrel tower bolt of extruded section and fixed, complete all as specified

S&F Aluminium anodised frame for doors, windows, ventilators and partition in room with one or more rebates including joining cleat for fixing etc complete all as specified.

S&F aluminium anodised window and ventilator shutters,fixed type without sash bar aluminium section wt 0.55 kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised snap beading , screws etc, complete all as specified.

S&F Anodised aluminium door shutters,aluminium section wt 0.55 kg/m including necessary jointing cleats ,glazing clips rubber neoprane packing ,handles 2 Nos in each door hinges, anodised aluminium snap beading screws etc complete all as specified.

M&L for hacking out old broken glass panes (any thickness size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified.

S&F 5.5mm thick sheet glass, ordinary quality and glazing in squares exceeding 0.5 Sqm in each pane complete all as specified & directed by Engineer-in-charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads

S&F, 3mm thick, sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 sqm in each panes complete all as specified & directed by Engineer-in-charge. Note :- To be fixed at any floor level not more than triple storey.

S & F in repair 6 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work fixed in any position, complete all as specified and directed by Engineer-in-Charge

S&F solar control film 50 micron reflective type sicked to glass panes as per instruction of manufacturers.

S&F in repair 125 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21

S&F in repair 100mm mild steel 4 Levers mortice lock vertical type.

S&F in repair Aluminium (Die cast ) body door closer hydraulically regulated, desigantion No. 3, universal type, Suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80Kg.

S&F in repair mild steel 300mm,ordinary rat tail rod pattern springs including roller and roller plate complete.

M&L in repair Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass, other parts made of mild steel heavy duty and fixed.

S & F in repair 140mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor

S&F in repair 250 mm aluminium anodized sliding door bolts, ISI marked, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and fixed

Supply and fixed in repair aluminium handles, cast type, anodised 150 mm size complete all as specified.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) of any description, any thicknes including cover fillets and frame work etc, complete all as specified and directed.

M & L for providing and fixing Gymsum board 12mm thick in ceiling fixed with screw as per manufacturer's instructions

S& F anodised aluminium snap grid frame work for false ceiling all as specified.

S&F hangars 6 mm dia, GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60mm long size of grid 605 x 605 mm and expansion hold fasteners 12.5 mm dia, 40 mm long compplete all as specified

M& L for two coat of Oil bound distemper on ceiling surface

S&F solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing

S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises.

M&L for Glazed ceramic jointless tiles dark shade in vertical surface 450X300X7mm thick,jointless tile set and jointed in neat cement slurry and pointed in white or coloured cement, set in 10mm thick backing coat in CM 1:4

M&L for Non Skid ceramic tiles colour jointless tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified.

S&F vitrified ceramic tiles light shade /double charged/ultra charged as directed , 10mm thick (square /rectangular ), coloured , polished ,area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm ( actual size of tile shall be 600x 600x8mm thick) , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified.

M/S MAYA CONSTRUCTION COMPANY

GEMRARAMCONTRACTOR

Leelashah Enterprises

M.D. CONSTRUCTION CO.

S.D. And Company

M/s Shree Construction Company

S K TRADER

M/S BHATI TRADERS