CERTAIN SPECIAL REPAIRS AND REVENUE WORKS AT MIRAN SAHIB AND DAMANA UNDER GE JAMMU

Amount

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlars facings, dressed stone work and precast concrete articles.

M&L for Brickwork in CM 1:4 with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, complete all as specified and directed

Dismantling AC corrugated, semi corrugated sheets in roof covering complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc), or insulation boards/slabs/blankets, any thickness any type including cover fillets, complete all as specified and directed.

Dismantling timber scantling 40 Sqcm and over in section in any position as in unframed work.

S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 MPs as in roof covering fixed with self tapping screws or L-type or J-type or cranked hook bolts as specified.

S&F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 MPs as in ridge of roof fixed with self tapping screws or L-type or J-type or cranked hook bolts as specified.

S&F 600x600 mm grid frame of galvanised iron powder coated section incl supply and fixing 4 mm thick non asbestos designer E board and comprising of under mentioned section etc for grid frame (a) Suspended GI main runner 32x24 mm bulb Tee section fixed with 4mm dia GI bar @ 1200 c/c level shall be adjusted with fly/bionet screws. (b) Placed in position cross Tee 600 mm long and 24x26 mm bulb Tee section @ 605 mm c/c using shape and bionet fixing arrangement to secure main runners. (c) Ceiling GI 26x24 mm size bulb section installed 605 mm long in between cross Tee. (d) GI coated angle 24x24 mm fixed with PVC rawl plugs and GI screws to secure with walls. (e) All the fixing details shown on drg No CEPZ/STD/809/07 dt 03-11-2007 and as per manufacturer instructions as approved by GE

Taking down Chowkats or frames n.exc 1.5 sq.m each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down Chowkats or frames exc 1.5 sq.m but n.exc 4 sqm each each with shutters (without taking off shutters from the frames) complete all as specified and directed.

S&F box type steel windows/Ventilator (factory made) outer frame made out ERW tube 'P' section 65X45X25 mm and shutter of ERW tube 'P' section 50mmX35mmX20mm openable (double shutter) with glazed shutter on extrernal side and gauzed shutter on internal side including steel pintel hinges steel handle 100 mm long mild steel tower bolt 02 nos on each shutter stopper of 'Z' section and its locking arrangement and mild steel hook and eyes suitable for fixing cooler /AC window complete all as specified and shown on drgs No CEPZTD-324/07 Sh 1/3 to 3/3 Note:- The quoted rate a shall also include (i). One shop coat of zinc chromate primer on all exposed surface and one coat of tar on the ends of steel surface in contact with bricks / concrte surface over two coat steel paint (ii) 4 nos MS steel lugs made of 20X5 mm Iron flat 200 mm long iii)10 mm Sq Bar grill/guard bar design as per drawing (iv) PCC block for embedding lugs

S&F Pressed steel frames (factory made) made out of 1.25 mm thick black MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete size of frame 125x60mm incl bottom of each chowkat to be welded with 2 Nos 25x25x3mm thick flat iron projecting 10 cm on either side complete all as specified and directed.

S&F 35 mm thick 2nd class hard wood plain, framed, paneled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied & fitted to chowklats complete all as specified and directed.

S&F 35 mm thick 2nd class hard wood factory made glazed & skeleton shutters, open rebated & prepared to receive glass gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, section 8, clause 8.20 (a); complete all as specified and directed.

S&F solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening as per specification & drawing all as specfied and directed.

S& F factory made solid panel PVC moulded door shutter with particle board core 28 to 30 mm thick (stiles) with 2,4 or 6 raised panel design with 2 mm thick moulded prelaminated PVC sheet on front face and 2 mm thick plain color PVC sheet on back face supply and fixing in frame at site as per specification and drawing.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in back filling, bed block for hold fast, coping, benching on corner of joints etc complete all as specified and directed.

S&F 100 mm size but hinges medium weight cold rolled stainless steel complete all as specified and directed.

S&F Aluminium handles D type anodised 150 mm long ISI marked complete all as specified and directed.

S&F 200 mm long aluminium anodised barrel tower bolt of extruted section ISI marked complete all as specified and directed.

S&F 250 mm long dia 16mm aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing blots & sliding bolts of extruded section complete all as specified.

M&L for preparing surface of new wood and wood based material of any description and girth, not otherwise described and treated with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparing surface of new steel material of any description and girth, not otherwise described and treated with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F mild steel 150mm, ordinary rat tail rod pattern springs including roller & roller plate complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56 mm nominal dia or wire and average width of aperture 1.0 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and directed.

S&F 3mm thick sheet glass, orinary quality glazing with oil putty in suare n.exc 0.5 sqm in each pane complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for removing of existing treatment (scrubbing, washing down etc) of old plaster or painted surfaces of wall omplete all as specified.

M&L for 15 mm thick rendering in CM 1:6 on other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for applying one coat of cement wall putty of minimum 2mm thick over plaster surface of wall complete all as specified and directed.

M&L for prepartion of surace and applying two coat of oil bound distemper over pink primer complete all as specitied and directed.

M&L for prepartion of surface and applying two coat of exterior emulsion over chalk whiting on plastered surface complete all as specified and directed.

Demolition of cement concrete of any description and in any position and removing the rubbish from work site complete all as specified and directed.

M&L cement concrete 25mm thick type B-1, 1:2:4 (using 20mm graded stone aggregate) as in sub base

Dismanting floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15 mm thick for laying floor finished in CM 1:4 complete all as specified

M&L for Non skid ceramic colour tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specfied and directed.

M&L light shade vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shade, pattern, laying etc of tiles complete all as specified and directed.

All as per item No 39 here-in-before above but as in skirting complete all as specified and directed.

M&L for glazed ceramic colour tiles (300 x 200 mm ) x 7 mm thick as in dados, skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specfied and directed.

M&L for screed bed or bedding layer of mortar 10 mm thick for wall in CM 1:4 complete all as specified

M&L for 50 mm thick PCC 1:3:6 type C-1 using 20 mm graded aggregate as in plinth protection etc finished even and smooth without using extra cement complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

All as per item No. 44 herein before but 15mm bore

S&F 20 mm bore steel tubing, medium grade, galvanished with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

S&F 15 mm bore steel tubing, medium grade, galvanished with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

Dismentling water tanks exc 250 & n exc 500 ltr complete all as specified and directed.

S&F 250/300 Litre capacity Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted and fixed in position complete all as specified and directed.

S&F 20mm dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F 20 mm dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

All as per item No. 51 herein before but 15mm dia complete all as specified and directed.

S&F in repair vitreous china squatting pan 'Orissa pattern, size 580x440 mm white, with integral foot rest and P or S trap and connection to flushing pipe, anti-syphonage pipe complete including provision of cement concrete bedding complete all specified in SSR part I complete all as specified and directed.

S&F vitreous china wash basin, white, flat back, size 550x400 mm excluding taps, waste, chain & plug and porcelain stopper but including brackets, waste coupling cutting, waste pipe for and pinning in ends of brackts or erecting standcomplete all as specified and directed.

S&F in repair PVC valveless, symphonic action type, flushing cistern, 10 ltrs capacity, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F low density PVC connections commercial quality 15mm bore with PTMT nuts of length 450mm complete all as specified and directed.

S&F low density PVC waste pipe32 mm bore for flusing cistern complete all as specified and directed

S&F in repair 15 mm bore bib taps long nose/long body, cast copper alloy CP fancy type with capstan head handle screwed down, screwed for brass, weight not less than 450 gms ferrule and fixed complete all as specified and directed.

S&F in repair 15 mm bore Angle valves, cast copper alloy CP fancy type, half turn, screwed down, high pressure, with crutch or butterfly handle, weight not less than 450 gms screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair 15 mm bore brass stop cock, cast copper alloy CP with long shank and cup (concealed type), high pressure, with capsgan head handle, weight not less than 450 gms screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F 15mm dia CP pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot or Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

S&F structural steel/tubular steel works as in post roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe-410W(GdeE-250) quality B including shop coat of primer complete all as specified and directed.

S&F Plates (plain or chequered)channels, square cut or notched (ordinary and counter sunk)forming holes, without any attachment as in gusset plate, base plate etc complete all as specified and directed

S&F Mild steel bolts.purpose made.with hexagonal orsquare head one end and screwedthe other, or screwed both ends;each screwed end to be fitted with washers and one hexagonal orsquare nut. exc 30cm long (dia of necxk exe 12 but n exe 16 mm) compolete all as specified

S&F 75/100 mm Cast iron floor trap with stainless steel grating including jointing to waste pipe fixed in cement concerete B1 (1:2:4) complete all as specified and directed.

S&F stainless steel grating doom 125/100/75 mm dia with hole (Min weight 25 gms) complete all as specified and directed.

S&F brass CP towel rail 20 mm dia 'D' type 60 cm long between flanges complete all as specified and directed.

S&F MS peg set of six power coated as approved by GE complete all as specified and directed.

S&F drapery curtain rod of metalic 20mm dia covered with PVC coating including MS bracket, end ball, rounded block (coated with brown/cherry/golden colour) of approved pattern and shade fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screw complete all as specified and directed.

S&F Glass shelf rectangular size 450mmx150mm, 5 mm thick glass with stainless steel bracket as per sample kept in AGE B/R office complete all as specified and directed. Make-Prayag

M&L for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in sub base to recive top mlayer complete all as specfied

M&L factory made precast machine crafted cement concrete M-40 grade antiskid tiles 300X300X22 to 25 mm polymer moulded using white cement and pigment laid over and including inclding 15 m thick screed bed in CM 1:6 complete all as specified and directed

M&L Excavating in post holes (or for similar work) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard/dense soil all as specified and directed by Engr-in- Charge

M&L PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete in foundation concreteof posts all as specified and directed by Engr-in- Charge

M&L PCC 1:2:4 type B2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete in foundation concreteof posts all as specified and directed by Engr-in- Charge

S&F structural steel/tubular steel works as in post roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed.

Preparation of newly steel surface of any description applying two coats of corrosion registant paint over a coat of primer.

M&L Hardcore of gauge n exc. 63 mm of broken bricks, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface.

M&L for 75mm thick cement concrete 1:4:8 (using 40mm graded stone aggregate) as in sub base of flooring

M&L PCC 1:2:4 type B2 (40mm graded stone aggregate) , 100 mm thick as top layer and finished even and smooth without using extra cement

Surface excavation in Hard / Dense Soil n exc 30 cm deep and averaging 15cm thick as in hard dense soil

Removing excavated material not exc 250M but n.exc 500M and depositing where directed at a level not exc 1.5m above the starting point

M&L Chequered cement concrete tiles with grey cement and pigment 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors including 20 mm thick screed bed in CM 1:4

M&L for 100mm thick cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base.

M&L for 60 mm thick machine pressed precast concrete interlocking paver block (M-35 grade) any shape and size using grey cement and pigment confirming to IS - 15658-2006 complete all as specified and directed.

M&L 50mm thick sand cushioning for machine pressed precast concrete interlocking paver block

Refixing ceiling boards obtained from dismantling all as directed

M&L for providing cement concrete type B0 1:2:4 (12.5mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges all as specified and as directed.

Taking down shutters of any description exc 1 sqm but not exc 2 sqm and refixing in same position.

Roughening the surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry @ 3 kg per sqm

S&F in repairs Vitreous china wash down water closet pan (pedestal pattern), white including fixing bolts,flush pipe and joints complete all as specified and directed by Engr-in-Charge.

S&F Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) all as specified and directed.

S&F swivel shower rose PTMT any colour with arm 15mm size 195mm long all as specified and directed.

Refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc) bore of pipe 15mm

Excavation in trenches not exc 1.5 m wide and not exc 1.5m deep for foundation etc and getting out in any soil.

M&L for PCC type C2 1:3:6 (40 mm graded aggregate) as in fdn and mass concrete.

M & L for RCC 1:1.5:3 type A-1, using 20 mm graded stone aggregate as in column footing including raft footings, foundation, plinth beam, bases of columns etc. complete.

M & L for RCC 1:1.5:3 type A1using 20 mm graded stone aggregate as in beams, cantilevers, lintels over 1.5m span complete.

M & L for RCC 1:1.5:3 Type A1 using 20 mm graded stone aggregate as in colums, pillars etc complete.

Use and waste form work to sides of concrete foundation, footing, bases of columns, plinth beam, side and soffits of plinth beam and similar works in vertical or to batter of rough finished surfaces complete.

Use and waste form work Square, rectangular or polygonal to sides of columns, pillars etc. of rough finished surfaces complete.

M & L for Steel reinforcement TMT bars 10 mm dia and over cut to length, bent to shape and tying with annealed MS wire 0.9mm dia all as specified and directed.

Ditto' all as per Item No 103 above but 5mm dia and over upto and incl 10 mm dia as in Binders,stirrups,spacer all as specified

Returning,filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm

Removing excavated material n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point

M & L two coats of cement based paint on newly plastered surface including preparation.

M&L for granite (of any type) stone 20mm thick machine cut, bedded and jointed as in cladding colour black all as specified and directed.

M&L for clean sawn timber in fixed second class soft wood in scantlings all as specified and directed

M & L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed

Taking down existing unserviceable point wiring of any description/type/ size of light/ fan/tube/power/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and seperating the serviceable items like fan regulators switches, sockets and light fittings for re-use under respective items and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as specified.

Taking down the existing unserviceable DB / main switch / cut out of any type / capacity / description as existing at site including making good the disturbed surfaces to match with the existing finishes all as specified.

M & L for Point wiring in concealed conduit with 1.5 Sq mm copper FRLSH conductor single core PVC insulated unsheathed 1100 V multistranded drawn through concealed conduit and including rigid PVC conduit and conduit accessories of suitable dia medium grade and pressed steel terminal boxes of 2 mm thick MS duly painted with red oxide metal primer including fixing/grouting sunken/ surface as per site requirement covered with 3 mm thick laminated hylam sheet including running up of 1.5 Sq mm FRLSH copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for fixing the switches/ sockets/ regulators etc all as specified for:

(a) One light point controlled by one, one way switch 5A, SP

(c) One bell point controlled with bell push.

(d) One exhaust/ ceiling fan point controlled by one, one way switch

(e) One 3 pin 5A switch socket outlet point controlled by one switch on the same board

(f) One 3 pin 5A switch socket outlet point controlled by one switch on independent board.

Description all as per item No 113 here-in-before but using 2.5 Sq mm single core FRLSH copper conductor cable of multistranded PVC insulated unsheathed 1100 Volts grade for 5/15 Amps switch socket combination point including running of 1.5 Sq mm copper conductor PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly.

S & F switch piano 5 Amps single pole one way flush type,make of Havells/Anchor

S &F socket Out let 3/5 pin 5 amps flush type.

S &F switch socket combination 3 pin 15 amps flush type.

S &F of electronic regulator step type make of bajaj/havells.

S &F call bell Musical type (short sound) type 230 v AC.

S &F Bell push, flush type 5 Amps.

S &F Ceiling rose, surface bakelite 65x50 mm three terminal.

Taking out the existing submain wiring of any type and size all as specified and directed by Engr In-Charge.

Sub main wiring power/circuit using PVC insulated unsheathed, multi stranded copper conductor cable ,FRLSH ,2 Single core of size 2.5 Sqmm, earth continuity conductor of size 1.5 Sqmm to be drawn through and including PVC non metalic rigid concealed 20/25 mm dia medium Grade in walls/roof including taking down the old submain wiring all as directed by Engineer in Charge.Notes:- (i)Two wires of 2.5 sqmm and one wire of 1.5 sqmm FRLS and one run of PVC conduit shall be measured as one unit.

supply and fixing of light Fitting LED 18 watt 6500K, power factor more than 0.95 and lux 95 L/W make of bajaj/havalls.

supply and fixing of Batten Holder make of Anchor/Surya/Bajaj.

supply and fixing of 5 watt LED bulb make of Philips/bajaj/Surya/Syska.

Supply and fixing flush on wall of Horizontal TPN DB 4way metallic double door IP-43 protection comprising of following:- i) MCB TPN 63 Amps,'C' curve for incoming -01 No ii) MCB 'C' curve SPN 32/40 Amps for outgoing circuits -03 No

MCB DB made of sheet steel phosphatised, powder painted with bus bar 200 A, neutral link, earth bar and Din rail , 415Volts SPN with 8way Double door IP-54-IK09 protection grade NOTE FOR ITEM NO 127 &128:The unit rate includes for cutting the brick walls to accommodate DB to make flush to wall.(2).The unit rate includes for making good the disturbed surfaces including finishes to match with the adjoining surface (3) MAKE OF DB & MCB - LEGRAND/ABB/L&T (4) The rate is inclusive of cutting chases & flush to wall & making good to the disturbed surfaces of walls etc to match with existing surfaces including white washing/colour washing/distempering to match with existing wall/floor/ceiling finishes making good disturbed surfaces of walls, etc ).

MCB SPN 240 Volts, 'B' series, breaking capacity 10 KA of rating 32Amps

MCB SP 32/40 Amps 'B' series, breaking capacity 10 KA

MCB SP 6 Amps 'B' series, breaking capacity 10 KA

M&L for earthing complete with galvanized steel earth plate electrode60cmX60cmX6mm thick buried directly in ground (earth plate not less than 2.25 mtr deep below the normal ground level) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth lead wire of 4.0mm dia by means of nuts bolts, washers, check nuts of iron or steel including PCC pits and RCC cover in PCC 1:2:4 (type B-1) and necessary earth work in any type of soil medium grade GI watering pipe 20 mm dia with funnel and wire mesh and 15mm bore GI pipe light grade protection pipe upto test point etc including excavation and charcoal, common salt surrounded with 15cm all around the plate all as specified and shown in EP-3 of SSR Part-I. all specified

Taking out existing serviceable exhaust fan and refixing the same after necessary repair/rewinding comlete.

Removing ,Repair and Refixing to existing ceiling fan 1200 mm sweep Providing MS hook of suitable size and length and making connection with T3 core copper cable including painting where as required all as per specified and directed by Engr-In-Charge.

Supply ,laying and testing cable XLPE insulated,screened,PVC bedded ,GI steel strip or wire armoured ,electric power cable, heavy duty 1100 V grade with std Al conductor of 16Sq MM 3.5 core

M&L PVC insulated service electric cable with aluminium conductor 1100 Volts grade cross sectional area 25 sq mm, 4 core complete all as specified and directed

Sand cushioning for cables with height of cushioning as 8 cm below the cable and 15 cm above the cable all as specified and directed .

Supplying and laying Bricks; common burnt clay building bricks, sub-class ‘B’ designation 75 complete all as specified and directed

Supply and fixing G I tubing 40 mm dia light grade galvanised with all fittting and fixed fix on wall ceiling or laid in floors complete all as specified and direceted at site .

RAJINDER KUMAR AND CO

Jagbir Singh and Co

Bidder Name

RAJINDER KUMAR AND CO

Jagbir Singh and Co

M/S A TO Z ENGINEERS