Erection of 2 Nos. of 22/0.433 KV 315 KVA DTRs at various location in Puducherry region.

Supply of HT Stool for 22 KV OH Line

Supply of 22 KV Strain Disc insulator with metal parts

Supply of 5' 6'' channel cross arm

Supply of H.T Stay set complete with material as required

Supply of LT 3 Phase cross arm with suitable pole clamp

Supply of LT shackle insulator with metal part.

Supply of LT pin insulator with Pin

Supply of CI knobs

Supply of 150 mm dia G.I pipe for 3Cx400 sq.mm. Cable

Supply of 1.1 KV, 3½ x 300 sq.mm PVC insulated and PVC sheathed/XLPE Power Cable (Conforming to IS 1554 (Part - I)/ 1988 / IS 7098 (PART 1) : 1988 with latest amendments)

Supply, erection and installation of Sub-Station feeder Electric pillar box with 600 Amps bus for capacity having aluminum bus bar of 2 x 50 x 12mm with 6 ways fitted with 630 Amps HRC fuse base of (S&S) Havels / Siemens make, Construction of cement concrete plinth for mounting the pillar box, and earthing of SS pillar. The SS pillar box design shall be similar to the existing model of Sub-Station pillar available with the Department. The pillar box shall be supplied with two in comers copper fuse links. Both the incomer shall have separate CT coil and Ammeter and a common voltmeter for both ways.

Labour charges for Laying of one run of PVC insulated and PVC sheathed / XLPE, ISI certified power cable of 1.1 KV grade of size exceeding 120 mm2 but not exceeding 400 mm2 direct in ground including Excavation of metal road, Sand cushioning, Brick protective covering and Refilling the Trench etc. as required. (0.35 x 0.75 x 1 Mt) (3½ x 400 mm2)

Labour charges for Laying of one number of PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 120 Sq.mm but not exceeding 400 Sq.mm in Metal pipe including Excavation in hard Soil / Metal, along / across the road upto 30 cm depth and Refilling the Trench etc. as required. (0.35 x 0.75 x 1 Mt) (150 mm dia G.I. pipe)

Supply and Erection of Clamp and lugs suitable for 3½ x 400 mm2 cable to termination at Pillar Box

Supply and Labour charges for erection of 30 ft RCC stud pole.

Labour charges for fixing of H.T Stool for 22 KV OH Line.

Labour charges for fixing of 22KV pin insulator with G.I. Pin.

Labour charges for fixing of 22KV strain disc insulator with metal parts.

Labour charges for erection of LT 3 Phase cross arm with suitable pole clamp.

Labour charges for fixing of LT shackle insulator with metal part.

Labour charges for erection of fixing of LT pin insulator with Pin

Labour charges for fixing of CI knobs

Labour charges for erection of H.T Stay set complete including excavation of pit

Supply and labour for erection of DP Transformer structure complete including excavation,erection of 30' RCC pole, refilling of 30' RCC pole and concreting 0.6 x 0.6 x 1.5 mts. and coping 0.6 x 0.6 x 0.5 mts. in 1:3:6 ratio using cement. 20mm HBG metal and sand, 30' RCC pole, DP structure materials, Bed channel, S/ C AB switch, 5'6" channel cross arm, HG Fuse, LAS, Pin Insulators, center support, M.S Angle 50x50x6 stay sets (if required), erection of earth electrode and construction of 4 nos of earth pit, GI wire No.6 for earthing all metal parts, Copper No. 4 wire for earthing of 18 KV Lightning arrestor and separate earthing for Transformer LT earth bush, painting 2 coat of aluminium paint for all channels, metal parts etc. and two coats of cement colour painting, to RCC pole etc., including cost of concreting materials such as cement,20mm HBG Metal, sand, aluminium & cement paint, copper No. 2,4 & 16 for jumper connections, HG Fuse arrangement, earthing of LAS, 'B' Class G.I Pipe 50mm dia for earthing, 12 mm alkathene pipe, HT/LT Danger & name board SS, MS 5/8 bolt nuts & washers (required size ) etc., Including loading and unloading charges for DTRs and conductor to be supplied by the Department.

Supply and Labour charges for erection of DP Transformer structure complete including excavation, erection of 42' rail pole, refilling of 42' rail pole and concreting 0.6 x 0.6 x 2 mts. and coping 0.6 x 0.6 x 0.5 mts. in 1:3:6 ratio using cement. 20mm HBG metal and sand, 42' rail pole, DP structure materials, Bed channel, S/ C AB switch, 5'6"channel cross arm, HG Fuse, LAS, Pin Insulators, Center support, M.S Angle 50x50x6, stay sets (if required), erection of earth electrode and construction of 4 nos of earth pit, GI wire No.6 for earthing all metal parts, Copper No. 4 wire for earthing of 18 KV Lightning arrestor and separate earthing for Transformer LT earth bush, painting 2 coat of aluminium paint for all channels, metal parts etc. and two coats of cement colour painting, to rail pole etc., including cost of concreting materials such as cement, 20mm HBG Metal, sand, aluminium & cement paint, copper No. 2,4 & 16 for jumper connections, HG Fuse arrangement, earthing of LAS, 'B' Class G.I Pipe 50mm dia for earthing, 12 mm alkathene pipe, HT/LT Danger & name board SS, MS 5/8 bolt nuts & washers (required size ) etc., Including loading and unloading charges for DTRs and conductor to be supplied by the Department.

Supply and Labour charges for erection of 30’ RCC pole including excavation of pole pit and concreting, 0.6 x 0.6 x 1.5 Mts. and coping 0.6 x 0.6 x 0.5 Mts. in 1:3:6 ratio using 20 mm HGB Metal, earthing of RCC pole including supply of concreting materials and No. 6 G.I wire for earthing.

Labour charges for fixing of 5'6' channel cross arm with suitable clamp

Supply and Labour charges for providing 4 Nos. of LT feedering arrangement for taking connection from the LT bush of the transformer including supply of all materials as per site condition i.e. 50x10 mm aluminium flat, aluminium socket for cable and required quantities of 3.5 core 300 sq.mm. L.T. U.G. cable, HRC fuse, fuse link, etc.,

Labour Charges for straining of ACSR conductor 7/3.35 Sq.mm including binding etc. as required

Labour Charges for straining of ACSR conductor 7/2.59 Sq.mm including binding etc. as required

Karthik Enterprises

GRENEL POWERS PVT.LTD.