Design SITC of 2 Nos Machine Room Less (MRL) Lifts Lift well shaft and other related Civil Electrical works in DRM Office Premises at Lucknow

Amount

Total Amount of BoQ 2

Amount after unconditional Rebate

Description of Work / Item(s)

Amount

Lift work including civil works

Schedule 'A' Lift NS, BoQ 3

Schedule ‘B’ Civil (DSR), BoQ 4

Schedule 'C' Northern Railway SOR BoQ 5

Description of Work / Item(s)

Amount

Design, manufacture, supply, erection, testing & commissioning of Passenger Elevator machine roomless (G+1) travel 5.6 mtrs. (ground to FOB), suitable for 10 person confirming to CPWD system / specification. (Warranty period 24 months).

Design, manufacture, supply, erection, testing & commissioning of Passenger Elevator machine roomless (G+2) travel 11.2 mtrs. (ground to 2nd Floor), suitable for 10 person confirming to CPWD system / specification. (Warranty period 24 months).

Description of Work / Item(s)

Amount

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.

All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size

1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :

1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :

1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size

Centering and shuttering including strutting, propping etc. and removal of form for :

Foundations, footings, bases of columns, etc. for mass concrete

Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Suspended floors, roofs, landings, balconies and access platform

Columns, Pillars, Piers, Abutments, Posts and Struts

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.

Thermo-Mechanically Treated bars of grade Fe-500D or more.

Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

Hot finished welded type tubes

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

Bend 87.5° , 110 mm bend.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :

Two or more coats on new work

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.

Area of slab upto 0.50 sqm

Area of slab over 0.50 sqm

Description of Work / Item(s)

Amount

Extra over item 2.6.1 for Excavation in foundation for building and bridges to cover dressing to neat dimension and plumbing sides etc. Note : Dressing under this item is payable for the total qty of excavation in foundation and not partly.

Loading/Unloading ballast, Kankar brickbats etc.

Leading ballast, Kankar brick Bat lead up to 25KM

Supply and Using P.P.C. Cement

aluminium composite cladding, providing and fixing Aluminium composite panel having total thickness of 4mm (with 0.5 mm thick Aluminium foil skin on both sides) along with min. 25 micron PVdF coating on top coil and polymer / epoxy coating on back coil ( for -7 microns) fixed on Aluminium substructure of 50 mm x 25mm x 3mm or 38mm x 38mm x4mm (IS Grade Aluminium extrusion) with stainless steel fastening system of Hilti / Fischer Dash Fastener on facade horizontal / vertical surfaces of columns suspended ceiling sills, Jams, canopys, etc. and making 25 mm grooves and applying non staining and non streaking sealent 789 or 991 Hp with Baker Rod completes as per approved shop Drgs. and as per specifications ( straight and curved) only exposed surfaces to be measured and paid.

Extra for using 5mm thick aluminium composite pannel (with 0.5mm thick aluminium foil skin on both sides) in lieu of 4mm Aluminium composite panel (only thickness of core to be 4mm in lieu of 3mm in item 082080)

Providing and fixing 0.55mm TCT standing seam profile for roofing comprising Zincalume / Galvalume base steel of metal thickness 0.5mm and coated with Zincalume aluminiume coating of 150 gsm as per AZ-150, AS: 1397 (total of both sides) and permenently colour coated with 20 micron super polyester /SMP colour coating over a 5 micron primer and back coat of 5 micron over a 5 micron primer standing seam sheets to be profiled to desired length and width of 400 mm having profile depth of min. 61 mm with a unique consealed clip made from GI, one portion of the clip (lower) fastened to purlin and upper part gets attached to roofing sheets there by providing an absolutely puncture-less roof with consealed clip crimped/ locked together by a mechanical sewing machine.

Providing and fixing of coloured galvalume plain sheet flashings at ridges / apex Junctions of roofing cladding, cover / corner / barge pieces etc. In required shape, colour duly fixed with stitching screws (with EPDM washers etc. As per site requirement)

601mm to 1200mm width (girth)

Lettering with Synthetic Enamel paint two coats

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.

Dismantling plain cement concrete 1:2:4 or richer mix

Dismantling plain cement concrete mix leaner than 1:2:4

Dismantling brick work in cement