PROVN OF PT SHED IN SCHOOL GROUND AT RMS CHAIL UNDER GE JUTOGH

Amount

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil, comlete all as specified and directed.

Excavation in post holes (or similar holes) each n. exc. 0.5 cum in hard/dense soil and getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc. 25 cm watering and removing surplus soil to a distance n. exc 50m and making good surface complete all as specified and directed.

M&L for PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate as in foundation filling and mass concrete, complete all as specified and directed.

M&L for 75mm thick, PCC 1:4:8, type D-2, using 40mm graded stone aggregate as in sub base including finishing the surface even and fair complete all as specified and directed.

M&L for brick work with sub class 'B' brick, straight or curved on plan exc 6m mean radius, built in CM 1:4, complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8, type D-2, using 40 mm graded crushed stone aggregate as in sub base finishing concrete surfaces even and rough to receive top layer complete all as specified and directed.

M&L for 40mm thick, PCC, 1:2:4, type B1, using 20mm graded crushed stone aggregate as in floors and pavings, finish the surface even and smooth without using extra cement, complete all as specified and directed.

Supply only glass dividing strips 3mm thick, 38mm wide, inserted in position conforming to design, complete all as specified.

M&L for structural steel framed work as in roof/ ceiling or gates of angle or other section with gusset plates , rails , braces etc complete drilled for fixing of steel sheeting etc of Fe 410 -W (Gde- E- 250) quality-A, complete all as specified and directed.

M&L for mild steel work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed

S&F mild steel screw bolts (machine made) dia of neck exceeding 5 but not exc 10 mm with hexagonal or square head at one end and screwed the other end or screwed both end, each screw end to be fitted with washers and one hexagonal or square nuts, n.exc 5cm long complete all as specified and directed.

M&L for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws compete all as specified and directed.

M&L for pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall eaves board etc., fixed with self tapping screws compete all as specified and directed.

M&L for rendering 15 mm thick on fair surfaces of brickwork or concrete surface in cement mortar 1:4 finished even and smooth without using extra cement at any height complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint on walls complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description over 10cm wide or girth incl preparation of surface etc., compete all as specified and directed.

M&L for point wiring with colour coding multistranded copper conductor cable, PVC insulated (FRLS) and unsheathed size 1.5 sqmm with PVC Casing N Caping with fixing accessories for one light /fan/bell point controlled by one switch with pressed steel concealed terminal boxes covered with 3mm thick laminated sheet incl. continuous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly all as specified and directed.

All as per item No 17.00 above but for one 3/5 pin socket 5 Amp on same board complete all as specified and directed

All as per item No 17.00 above but for one 3/5 pin socket 5 Amp on independent board complete all as specified and directed

All as per item No 17.00 above but for 3 pins socket outlet 15A independent with 4 sq mm wire and 4 sqmm earth wire complete all as specified and directed.

S&F switch piano flush type, 5 Amps, single pole one way complete all as specified and directed

S&F switch piano flush type, 15 Amps, single pole one way complete all as specified and directed

S&F Socket outlet 2 in 1, 3 pin, 5A (multi purpose) complete all as specified and directed

S&F Socket outlet 2 in 1, 3 pin, 5/15A (multi purpose) complete all as specified and directed

S&F ceiling rose, PVC/ Polycarbonate isolated body, surface backlite, 65x50mm three terminals complete all as specified and directed

S&F lamp holder PVC/ Polycarbonate type with back plate suitable for LED Lamp, incl LED Bulbs 9/10W B-22 Pin type, complete all as specified and directed

S&F LED lights fitting 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with 3core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F LED building secuity light 25 watt, fixed with and incl bracket made of 40mm dia GI pipe light grade length not less than 1.2 mtr with all connected accessories complete including electrical connection with copper cable from ceiling rose to fittings complete all as specified and directed.

S & F Distribution board (DB's) 12 way SPN double door with 200Amps busbar, Neutral link, having sheet metal enclosures for suitable for MCBs 240 V, 50 Hz complete as specified and directed.

S&F RCBOs for earth leakage protection, overload & short- circuit protection 2pole, 40A rating, 300mA capacity suitable for 240 Volts complete all as specified and directed.

S&F MCB SPN 6-32 amp rating 240V, 10KA of poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete as specified and all as directed.

S&F MCB SP 6-32 amp rating 240V, 10KA of poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete as specified and all as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 Sqmm 2 core, complete as specified and all as directed.

Supply, fixing or laying HDPE (DWC) tubing 50 mm dia as per IS:16205 part 24 fixing on poles, walls under floors, laying on surface etc as reqd at site complete as specified and all as directed. Note: Rate for all accessories such as bend, joints, nut bolts, clamps deemed to be included in quoted rates.

M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr deep below ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised means of earth wire 4 mm dia with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 20 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point including all earth work excavation, returning filling and disposal of surplus soil and testing on completion all as specified and directed.

Babu Ram Sud and Sons

NSK TRADER

R. P. Suppliers and Construction Co.

SYNDICATE BUILDERS