SPECIAL REPAIR TO BUILDING NO T-82(JCO MD ACCN) AND ADDITION/ALTERATION TO TOILET BLOCK AT BASOLI UNDER GE BASOLI

Amount

Taking down chowkats or frames with shutters (w/o taking off shutters from the frame) exc. 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (w/o taking off shutters from the frame) n.exc. 1.5 Sqm each complete all as specified and directed .

Material and labour for Steel window factory made double shutter and tubular moulded frame of 16 gauge suitable for double shutter as per drg No CEPZ/TD/245/01 sheet 1/1 and CEPZ/TD/246/01 sheet 1/2 (double for mosquito proof one glazed with glazing bars and one gauged without glazing bars ) with side hung shutters including projecting type hinges non friction with 3mm thick 100mm long handle and two Nos tower bolts 100mm long welded on 3.0mm thick MS plate to each window shutter and including hold fast and painting with one shop coat of zinc chrome primer complete all as specified and directed.

Supply and fix for Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks and similar work conforming to Fe -290 Gde -E-165,complete all as specified and directed.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed .

Supply and fix Factory made solid panel PVC door shutter 28 to 30mm thick (style) with 2,4 or 6 raised panel design with 2mm moulded prelam PVC sheet on the front face and 2mm plain colour PVC sheet on back face with wood free EPS, complete all as specified and directed.

Supply and fixing for 35 mm thick Factory made 2nd class hard wood door shutter with top panel Glazed and skeleton open rebated and prepared to receive glass, gauze, etc.(without sash bars) fitted with cut and mitred beds for securing glass, etc.; The sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.20 (a) complete all as specified and directed.

Supply and fixing for 35mm thick factory made 2nd class hard wood (Sal/ Hollock) plain, framed, panelled shutters (two panels) with lock rail and panels of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial face veneers on both sides.The size of rail and style as per IS–1003 (Part-I), kiln seasoned and chemically pressure treated, fitted to chowkats, complete all as specified and directed.

Supply and fix in repair PVC board 20mm thick prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber/angle iron frame work etc complete all as specified and directed.

Supply and fix for Aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt,complete all as specified and directed.

S&F Extruded aluminium alloy handles fabricated type anodised and fixed, 150 mm size complete, all as specified and directed.

Supply and fix for mild steel cold rolled butt hinges medium weight 100 mm long complete all as specified and directed.

S&F Mild steel barrel tower bolts of stove enamelled black, with bright bolt of size 150mm.complete all as specified and directed..

S&F Mild steel pressed handles,oval type, stove emameled black of size 125mm.complete all as specified and directed..

S&F MS 300mm ordinary rat tail rod pattern springs including roller and roller plate. complete all as specified and directed..

Supply and fixing for Mild steel galvanised wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks, wire staples or beading etc, complete all as specified and directed.

S&F Mild steel sliding door bolts of size 300mm long with hasp, staples and fixing clips of sheet extruded section and fixing bolts of extruded section. complete all as specified and directed..

Supply and fix for Aluminium alloy, anodised, sliding door bolt 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed,complete all as specified and directed.

Supply and fix for Sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads in squares not exc. 0.5 Sqm in each pane, complete all as specified and directed.

Supply and fix Continous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flap (when open) 30mm complete all as specified and directed.

Taking down steel water tubing of 15/20mm dia including all fittings complete all as specified and directed.

Supply and fix for Steel water tubing 15 mm bore medium grade galvanised with all fittings including short lengths, fixed to walls, or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and directed.

Refixing for steel water tubing galvenised, 15 mm bore, in old or new position with all new fittings and fixed to walls, complete all as specified and directed.

Supply and fix for Steel water tubing 20 mm bore medium grade galvanised with all fittings including short lengths, fixed to walls, or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and directed.

Refixing for steel water tubing galvenised, 20 mm bore, in old or new position with all new fittings and fixed to walls, complete all as specified and directed.

Cutting chases, plainning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, sillls, sunshades, shelves, lintels, etc; and cutting chases for concealed water tubing or concealed conduit wiring,wiring, etc. and making good,cutting exceeding 20cm girth in brick wall.complete all as specified and directed.

Supply and fix for Extruded aluminium alloy handles fabricated type anodised and fixed, 125 mm size complete, all as specified and directed.

Supply and fix for Decorative curtain rod with fixing brackets, stops, rollers etc complete all as specified and directed.

Taking down cement plaster on brick or concrete surface including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

Material and labour for Rendering 15mm thick in cement mortar 1:4 and finished even and smooth without using extra cement including preparation of new plastered surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

Material and labour for Rendering 15mm thick in cement mortar 1:6 and finished even and smooth without using extra cement including preparation of new plastered surfaces and applying two coats of distemper oil emulsion complete all as specified and directed.

Material and labour for Rendering 10mm thick in cement mortar 1:6 and finished even and smooth without using extra cement including preparation of new plastered surfaces complete all as specified and directed.

Rendering 5mm thick on brick or concrete surface as in ceiling in cement mortar 1:3 finished surface even and smooth without using extra cement including preparation of new plastered surfaces and applying three coats of white wash including taking down cement plaster on brick or concrete surface including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

Material and labour for preparation of new plastered surfaces and applying two coats of distemper oil emulsion over a coat of primer and coat of 3mm thick wall care putty complete all as specified and directed.

Material and labour for preparation of new wooden surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

Material and labour for preparation of steel and iron surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for preperation of old plastered surface of wall and applying one coat of cement base paint complete all as specified and directed.

M&L for preperation of old plastered surface of wall and applying one coat of distemper oil emulsion complete all as specified and directed.

M&L for preperation of old plastered surface of ceiling and applying one coat of white wash complete all as specified and directed.

Supply and fix for pressed steel frames for doors of size 105 x 60 mm, with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including back filling of plain cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregate and a shop coat of red oxide, zinc chrome primer complete all as specified and directed

Supply and fix for pressed steel frames for doors of size 125 x 60 mm, with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including back filling of plain cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregate and a shop coat of red oxide, zinc chrome primer complete all as specified and directed .

M&L for providing 75mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each ) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed.

Plain cement concrete 40mm thick 1:2:4 type B-1 using 20 mm graded stone aggregate as in floor complete, all as specified and directed .

Material and labour for Non Skid ceramic coloured joint free tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and brushing neat cement slurry with 3 kg of cement per sqm over and including Screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 for laying tiles including roughening surfaces of old concrete floor by picking , sweeping clean and washing down with water to remove dust, etc and Complete all as specified and directed.

Material and labour for Non Skid ceramic coloured joint free tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in vertical surface like skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and brushing neat cement slurry with 3 kg of cement per sqm over and including Screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 for laying tiles including roughening surfaces of old concrete floor by picking , sweeping clean and washing down with water to remove dust, etc and Complete all as specified and directed.

Material and labour for Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and brushing neat cement slurry with 3 kg of cement per sqm over and including Screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 for laying tiles including roughening surfaces of old concrete floor by picking , sweeping clean and washing down with water to remove dust, etc and Complete all as specified and directed.

Material and labour for Glazed glossy ceramic coloured joint free tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and brushing neat cement slurry with 3 kg of cement per sqm over and including Screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 for laying tiles including roughening surfaces of old concrete floor by picking , sweeping clean and washing down with water to remove dust, etc and Complete all as specified and directed.

Material and labour for Glazed ceramic tiles in vertical surface 350X250X7mm/450x300x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 10 mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:4 and finished even and fair for receiving tiles including diismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), rubbish off the premises complete all as specified and directed.

Material and labour for Machine cut kota stone slab fooring 20-22mm thick jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to obtain mirror finish and brushing neat cement slurry with 3 kg of cement per sqm over and including Screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 complete all as specified and directed.

Material and labour for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete, all as specified and directed.

M&L PCC 1:4:8 type D-2 ( Using 40mm graded crushed stone aggregate ) in foundation filling and mass concrete complete all as specified and directed.

Supply and fixing in repair for 10 ltr capacity PVC valveless, syphonic action type flushing cistern low level white with inlet, ball valve, float and handle including flush pipe and connection to pipe complete all as specified and directed.

Supply and fix for 150mm size hasp and staple safety type aluminium anodised with mild steel hinges pin including bolt to hinge plate and fixed with screw complete all as specified and directed.

Supply and fix in repair for 15mm dia bore Stop valve fancy type, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed

Supply and fix in repair for 15mm dia bore Stop valve concealed type,long shank cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed

Supply and fix for PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repair Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of bore 15 mm, complete all as specified and directed.

Supply and fix Chromium plated brass shower rose with or without swivel joints, 125 mm size including fixing to steel pipe or union,complete all as specified and directed.

Supply and fix in repair 15 mm dia bore Bib taps , cast copper alloy, with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Supply and fix sinks with drainage board made of stainless steel 1mm thick overall size 915mmx460mm bowl size 410mm x 330mm x160mm for kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar connecting union to pipe, GI waste Pipe 32mm from sink to nahani trap of approved brand including cost of materials, adhesive solution, including coupling and with a pair of suitable C.I. brackets including painting the brackets with two coats of approved paint cutting holes in walls and making good the same etc. complete all as specified and directed.

Supply and fix Stainless steel kitchen plate rack.of overall size 915mm x 915mm complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

Supply and fix in repair for Vitreous Chinaware squatting pan, orissa pattern size 580mm x 440mm white , with integral foot rests, including connection to trap,and to flushing pipe, anti-syphonage pipe,etc including making good to floor flush pipe of polyethylene of low or high density or PVC, 32 mm dia, for low level cistern complete all as specified and directed.

Supply and fix in repair for vitreous china wash hand basin white flat back of size 550x400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands exclusive of waste pipe but including PTMT 32mm waste coupling and waste pipe, complete all as specified and directed.

M&L for PVC (SWR) pipe single socketed in any length with rubber ring joint fixed to wall of 75mm dia complete all as specified and directed..

M&L for PVC (SWR) pipe single socketed in any length with rubber ring joint laid in trenches 75mm dia complete all as specified and directed..

M&L for PVC (SWR) pipe single socketed in any length with rubber ring joint fixed to wall of 110mm dia complete all as specified and directed..

M&L for PVC (SWR) pipe single socketed in any length with rubber ring joint laid in trenches 110mm dia complete all as specified and directed..

M&L for PVC (SWR) bend of any radius of 110mm bore complete all as specified and directed..

M&L for PVC (SWR) bend of any radius of 75mm bore complete all as specified and directed..

M&L for PVC (SWR) branch piece, single (single Y) equal or unequal of 75mm bore complete all as specified and directed..

M&L for PVC (SWR) branch piece, single (single Y) equal or unequal of 110mm bore complete all as specified and directed..

S&F "P" or "S" trap and fixed in position with 100/110 mm bore pipe complete all as specified and directed

M&L for 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent solution complete all as specified and directed..

Rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyetylene material which is duly stablized with anti-oxidentPlastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc complete including dismantling existing water tank all as specified and directed.

Supply and fix Tubular towel rail, 20mm dia, D-type, 600mm long between flanges brass chromium plated fixed with rawl plug etc complete all as specified and directed.

Supply and fix PTMT shelf (medium wt not less than 500gm) fixed with and including chromium plated brass screw and wooden plastic cleat complete all as specified and directed.

Taking down ,dismantling of broken/loose portion of chajja ,facia upto 450 mm wide and making good the surfaces with cement mortar 1:3 or PCC 1:1.5:3 including necessary formwork /scffolding and matching with existing surface of facia (including two coats of weather proof exterior emulsion paint over a coat of primer ) complete all as specified and directed.

Dismantling asbestos cement (Corrugated, Semi corrugated, etc,) sheets in roof covering complete all as specified and directed .

Supply and fix for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed .

Supply and fix for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and including dismantling asbestos cement (Corrugated, Semi corrugated, etc,) sheets in roof covering complete all as specified and directed .

Material and labour for Roof trusses (framed) ,trussed purlins, crane gantries , rails and fastenings and heavy bracket framing (beams, tee, angle, channel or flat sections) including distance pieces, cleats etc., conforming to Fe 410-W (Gde-E-250) quality -A complete all as specified and directed.

Supply and fix for MS Screw bolts machine made 11 mm to 15mm dia length exceeding 10 cm and n.exc 15 cm with hexazonal or sqrs heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washer and one hexazonal of sequare nuts etc , complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.), or insulation boards / slabs / blankets, anythickness,including cover fillets complete all as specified and directed .

Dismantling timber scantlings 40 sq. cm and over in section in any position complete all as specified and directed .

Dismantling timbe in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section. complete all as specified and directed .

Dismantaling wrought iron or mild steel work of any description not otherwise provided for. complete all as specified and directed .

Supply and fixing 10mm thick PVC insulation panel with EPS stuck to 1mm plain thick PVC sheet suitably placed in false ceiling grid made of aluminium / GI/MS as per specification and drawing complete with 6mm dia GI hanging channel including necessay fixers drilling, fasteners etc complete all as specified and directed

Demolition of brick tiles or terracing tiles single layer on roof complete all as specified and directed.

Material and labour for roughening surfacesof old concrete of picking sweeping and washing down with water to remove dust etc including taking down tarfelt and brushing with neat cement slurry @ 3Kg of cement per sqm including 20mm thick screeding in CM 1:4 mixed with water proofing compound complete all as specified and directed by Engineer-in-Charge (WPC shall be measured & paid seperately)..

Supply only integral water proofing compound complete all as specified and directed.

Material and labour for applying evenly one coat of bitumen primer on roof surface conforming to IS-3384 of 1986 @ 0.30 litres/sqm. and applying a layer of APP based polymeric membrane 3mm thick (minimum) weighing 3.6 kg per sqm (reinforced) with polyster Non woven fabric weighing not less than 160 gms per sqm top of membrane with mineral gravel finish. The overlap shall be minimum 150mm on transverse direction and 100 mm on longitudinal direction and sealing overlap by torch application complete all as specified and directed by Engineer-in-Charge .

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoines arches,pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles complete all as specified and directed.

M&L for brick work with old size sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and directed.

Supply and fix cast iron floor trap 75 mm, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

Supply and fix stainless steel Toilet paper holder with cover fixed on wall with chromium plated screw including all necessary fixing accessories Make: Hindware cat part No F88003 or equivalent in Jaquar complete all as specified and directed.

Supply and fix Health Faucet ABS with 1.20metre SS flexible tube & ABS wall hook including all necessary fixing accessories Make: Hindware/ Jaquar complete all as specified and directed.

Supply and fix for natural colour anodized aluminium door shutters, with sash bars, locking rails and locking arrangement and hydraulic floor door closing arrangement including necessary jointing cleats, glazing clips, rubber packing, anodized aluminium snap beading, screw , suitable handle with and including 4mm thick sheet glass tinted type. Size of lock rail 44.45x81.50mm, side rail 85.85x44.45mm, top rail 83.5x44.45mm, bottom rail 150x44.45 and thickness of aluminium member 1.50mm thick including 2mm thick of size 101.60x44.45mm including all fixing arrangement complete all as specified and directed.

Supply and fix for natural colour anodized aluminium window and ventilators, with sash bars, locking rails and locking arrangement including necessary jointing cleats, glazing clips, rubber packing, anodized aluminium snap beading, screw , suitable handle with and including 4mm thick sheet glass. Size of top/bottom rail shall be 44.45x44.45mm and thickness of aluminium member 1.50mm thick complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Material and labour for Point wiring with 1.5 Sqmm (nominal area)copper conductor FRLS cable (Multi stranded) PVC insulated and unsheathed in and including concealed PVC rigid non metallic conduit (ISI marked) with sunk cast iron/pressed steel terminal boxes of suitable size with 3mm thick plastic laminated sheet for light or one fan point controlled by one switch incl 1.5 Sqmm (nominal area) copper conductor cable (multistranded) PVC insulated and unsheathed with colour code earth wire connected to common earth dolly complete all as specified. Note : (a) Unit rate include for cutting chases for conduit and sinking for boxes and making good to wall, floors etc. The metal flush box and cover plate shall be measured & paid under relevant items of BOQ'

All as per item No 102 but for one 3 pin 5 Amp socket outlet on independent board complete all as specified and directed.

All as per item No 102 but for one 3 pin 5 Amp socket outlet on same board complete all as specified and directed.

All as per srl item No 102 but one bell/buzzer point controlled by one push button complete all as per specified and directed.

Material and labour for Point wiring with 2.5 Sqmm copper conductor FRLS cable (Multi stranded ) PVC insulated and unsheathed cable conductor in and including concealed PVC rigid non metalic concealed conduit (ISI marked) of suitable size with metal flush boxes of adequate size with cover plate for one 3 pin socket outlet 15 amps on independent board incl continuous 1.5 sqmm copper conductor FRLS (multistranded) PVC insulated and unsheathed cable earth wire connected to common earth dolly complete all as specified. Note : Unit rate for cutting chases for conduit and sinking of boxes and making good to wall,floor ceiling complete all as specified and directed by Engineer in charge. The metal flush box and cover plate shall be measured & paid under relevant items of BOQ'

Supply and fix Switch piano, flush type single pole, one way 5 Amp. complete all as specified and directed.

Supply and fix Switch Bell push, flush type, 5 amp complete all as specified and directed.

Supply and fix bell ding dong, 230 V complete all as specified & directed. complete all as specified and directed.

Supply and fix Socket outlet 2 in 1, 5 pin, 5A complete.complete all as specified and directed.

Supply and fix Switch socket combination 2 in 1, 5 pin, 5 Amp flush type universal. complete all as specified and directed.

Supply and fix Switch socket combination 2 in 1, 6 pin, 6 and 15 Amp flush type universal. complete all as specified and directed.

Supply and fix ceiling rose surface bakelite, two to three terminal isolated body fixed on PVC round block complete all as per specified and directed.

M&L for Lamp holder, PVC/Polycarbonate type with back plate having matching colour to holder suitable for angle/batten fittings complete all as per specified and directed.

Supply and fix for stepped type electronic fan regulator flush type with 5 steps speed control complete all as specified and directed.

Material and labour for sub main wiring with two run of single core FRLS PVC insulated and unsheathed cable with copper conductor (Multi strand) having nominal area 6.00 Sqmm drawing into and including medium grade PVC non metallic rigid conduit of 20 mm dia and making electric connections including one run FRLS PVC insulated single core copper conductor cable 6.00 Sqmm as a earth continuity conductor(green colour), including cutting chases in brick wall, replastering and making good to match the existing specifications complete all as specified and directed by Engineer-in-Charge. Note :- (i) Rates are deemed to be included chases of conduit and sinking for boxes cutting and making holes in wall/floor for passing in or through conduit (ii) Two run of 6.00 sqmm single core FRLS PVC insulated copper conductor cable one run of 6.00 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of suitable size will be measured as a one unit.

Supply and fix for sheet metal powder enclosure powder coated versatile double door SPN 8 way distribution board for MCB provisions fitted with copper bus bar rated, neutral link , earth bar and din rail suitable for use on 240/215Volt, 50Hz complete all as specified and directed.

Supply and fix LED tube light fitting, 1 x 20W, 230V Energy efficient T8, Box Type, housing with reflector cover channel, bipin holders, connector block, etc complete with tube rod LED 18/20 watt, all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size Make : Crompton model no DMLNM1T8-16 or equivalent in Philips / Bajaj/ Wipro.

Supply and fix LED mirror fitting 1x8W, 230V Energy efficient, Box type, housing with reflector cover channel, bipin holders, connector block, etc complete with tube rod LED 8 Watt, all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size Make : Crompton model No DMLN1T8-8 or equivalent in Philips/ Bajaj/ Wipro.

Supply and fix exhaust fan 230 mm sweep with louver complete including making all arrangement for holes in brick / stone massonery wall of any thickness grouting of nuts / bolts in wall complete all as specified and directed

Material and labour for Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of SSR Part-I (2009) including filling of charcoal dust , common salt all around Earth plate upto 150mm, 20mm bore GI medium grade watering pipe with funnel with wire mesh at top, 15 mm bore light grade earth lead protection pipe upto main board with RCC cover suitable handle and angle iron frame for pit top and necessary excavation and earth work in any type of soil etc. complete all as specified and as directed including testing on completion. (Note: The rate quoted include the cost of earthing wire and protection upto 7.5 metre length.)

Supply and fix in repair for MCB SP 5 to 32 Amps with 10 KA breaking capacity complete all as per specified and directed.

Supply and fix in repair for MCB SPN 40 amps with 10KA breaking capacity complete all as per specified and directed.

Supply and fix sheet metal single pole and neutral enclosure with three pin and earth plug and socket including one No MCB SP 20 Amp complete all as per specified and directed.

Supply and fix in replacement sheet metal powder coated VTPN DB double door 4 way with and including MCCB 63 Amps, 415 Volts, 50 Hz AC 25 KA 4 pole with copper bus bar rated 200 amps neutral link, earth bar and din rail for fixing the MCB,s complete all as specified and directed.

Supply and Laying in trenches or passing through pipe or fixing to pole/wall UG cable XLPE, insulated,armoured heavy duty electric cable with aluminum conductor,1100 Volts grade,25 Sq mm X 4.0 core cross section area including takingout existing cable complete all as specified and directed.

Supply and fix for DWC high densiy polyethylene pipes having dia 63/50 as per site requirement having corrugation on the wall and plain surface on the inner wall conforming to IS: 14930(Part I & II) for protection of underground cable laidalong pole/along wall/in PCC on GL/roof complete all as specified and directed.

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in any type of soil complete all as specified and directed...

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as in soft / loose soil. complete all as specified and directed.

Removing excavated material n exc. 50m and depositing wheredirected at a level n exc. 1.5 m above the starting point complete all as specified and directed.

S&F Ceiling fan 1200 mm sweep, five star rating including fan regulator electronic flush type stepped (rotary type) with five step speed control complete with all accessories as specified and directed. Make : Havells/Bajaj/Usha

Taking down old ceiling fan and refixing after painting, overhauling, rewinding etc complete all as specified and directed.

Ms International Engineers

BALKRISHAN GUPTA AND SONS

Nishikant Mahajan Govt Contractor

M/S S KUMAR & CO