REPAIR /MAINT OF INTERNAL WIRING, LED LIGHT FITTINGS WITH OTHER ALLIED WORKS IN OLD PROJECT AREA AT 24 ED UNDER AGE(I) AF MANAURI

Amount

Taking down carefully point wiring (light, fan, socket or power) complete with fitting such as switches, ceiling roses, lamp holder, sockets, fan regulators, Sketch light fittings wooden terminal box plastic laminated sheet cover from TW battens including TW batten or drawing from existing conduit non-metallic removing including TW batten all as specified and as directed by Engr-in-Charge

M&L for point wiring with single core PVC insulated unsheathed 1100 volt grade FRLS PVC cable IS:694 with multi stranded copper conductor of size 1.5 sqmm (Nominal area) drawn through and including rigid PVC conduit/ metelic conduit ISI marked not less than 20 mm dia with all PVC conduit fittings such as Tees, elbows, bend, reducers etc, concealed conduit wiring fixed on wall/ on ceiling with GI saddles, GI screws, rowel plugs (surface conduit wiring) with all fittings including tee, junction boxes and provision of pressed steel terminal box 1.25 mm thick of suitable size with 3 mm thick plastic laminated sheet cover for mounting switch sockets and regulators and drawn continuous earth wire with and including PVC insulated unsheathed 1100 volts grade cable with multi stranded copper conductor of size 1.5 sqmm (Nominal area) connected to earth dolly complete all as specified and as directed by Engr-in-Charge for the followings:- Note :- (i) The cost of chases cutting on wall for concealing conduit, boxes, plate etc are included in the unit quoted rate. (ii) Switches, sockets, etc shall be measured and paid for separately.

(a) one light/fan/bell point controlled by one switch

(b) one 3 pin 5 amps socket out let on same board controlled by one switch

(c) one 3 pin 6 amps socket outlet on independent board controlled by one switch

(d) one light point for two way switch controlled by one switch

(e) All as per item No 2 above but for one power point 3 pin 16 amps socket outlet on independent board with FRLS PVC insulated unsheathed 1100 volt grade cable with multi stranded copper conductor of size 2.5 sqmm (Nominal area) including provision of earth wire FRLS PVC insulated unsheathed 1100 volt grade cable with stranded copper conductor of size 2.5 sqmm (Nominal area) cable common connected to earth dolly all as specified for one 3 pin 16 amps socket outlet controlled by one switch complete all as specified and as directed by Engr-in-Charge.

(f) All as per item No 2 above but for one power point 3 pin 16 amps socket outlet on independent board with FRLS PVC insulated unsheathed 1100 volt grade cable with multi stranded copper conductor of size 4.0 sqmm (Nominal area) including provision of earth wire FRLS PVC insulated unsheathed 1100 volt grade cable with stranded copper conductor of size 4.0 sqmm (Nominal area) cable common connected to earth dolly all as specified for one 3 pin 16 amps socket outlet controlled by one switch complete all as specified and as directed by Engr-in-Charge.

S&F of switch piano flush type 5/6 Amps single pole one way 230/250 volts complete for one light/fan point/ 5 amp socket outlet controlled by one switch all as specified and directed by Engr-in-Charge

S&F of switch piano flush type 5/6 Amps single pole two way 230/250 volts complete for one light/fan point/ 5 amp socket outlet controlled by one switch all as specified and directed by Engr-in-Charge

S&F socket outlet 3 pin, 5/6 amps flush type complete all as specified and directed by Engr-in-Charge.

S&F switch piano flush type single pole one way 16 amps complete all as specified and directed by Engr-in-charge.

S&F socket outlet 2 in 1 combination, 3 pin 6/16 amps flush type complete all as specified and directed by Engr-in-Charge

S&F Ceiling rose, surface bakelite, 60 x 25, mm two to three terminals.

Supply and fixing LED tube light fitting with frame, driver etc in 20 W 4 feet long white colour mounting on tow Nos of PVC round/ square block on surface of wall / beam etc incl making all electric connection using three core copper cable drawn through in PVC flexible conduit pipe from ceiling rose to fittings complete including taking down to old light fitting in all specification with connecting accessories as directed. Note:- (i) Make:- Bajaj cat No BCLSBAL 20W CW or equivalent model of make as specified in list of makes Appendix ‘B’ to Particular specifications. (ii) Light fitting of other make of higher capacity may be used without any price adjustment.

Supply and fixing LED tube light fitting with frame, driver etc in 10 W 2 feet long white colour mounting on tow Nos of PVC round/ square block on surface of wall / beam etc incl making all electric connection using three core copper cable drawn through in PVC flexible conduit pipe from ceiling rose to fittings complete including taking down to old light fitting in all specification with connecting accessories as directed. Note:- (i) Make:- Bajaj cat No BCLSB 10W NW or equivalent model of make as specified in list of makes Appendix ‘B’ to Particular specifications. (ii) Light fitting of other make of higher capacity may be used without any price adjustment.

Supply and fixing angular base plate type PVC holder with 10 W LED bulk head light fittings incl making all electric connection using three core copper cable drawn through in PVC flexible counduit pipe from ceiling rose to fittings complete including taking down to old light fitting in all specification with connecting accessories as directed. Note:- (i) Make:-Bajaj cat No BIBWP 10W LED or equivalent model of make as specified in list of makes Appendix ‘B’ to Particular specifications. (ii) Light fitting of other make of higher capacity may be used without any price adjustment.

Supply and fixing LED street/ Bldg security light fittings 30 watts energy saving incl making all electric connection using three core copper cable drawn through in PVC flexible conduit pipe from ceiling rose to fittings and mounting bracket made out by GI pipe light grade in 25 mm dia of bore in required length bend in 120 degree fixed with clamp made out by GI strip in size 32 x4 mm using nut bolt and washer etc complete including taking down to old light fitting in all specification with connecting accessories as directed. Note:- (i) Make:-Bajaj cat No BCLST 30W LED I or equivalent model of make as specified in list of makes Appendix ‘B’ to Particular specifications. (ii) Light fitting of other make of higher capacity may be used without any price adjustment.

Supply and fix in replacement of sheet metal enclosure distribution board TPN, 4 poles ,double door, 4 way with 200 Amps rated copper bus bar vertical type with MCCB, four pole, 415 Volt ,100 Amp rating, 16 KA ultimate breaking capacity thermal magnetic base operated as incomer incl concealed in surface of wall and making all connection using gland, thimbles in required size complete all as specified and directed. Make:- Legrand/ Seimens/ L&T Note:- Quoted rate shall be included cost of MCCB , cutting plastering , coloring to surface of wall to be concealed etc all site required matching with existing surface.

Supply and fixin replacement sheet metal enclosure for MCB distribution board SPN, double door, 8 way with 200 Amp rated bus bar 230 Volts complete.

S&F MCB, Single pole and neutral, 230 volt, 63 Amp rating 10KA, C series fixed in DBs catered herein before.

S&F MCB, Single pole and neutral, 230 volt, 40 Amp rating 10KA, C series fixed in DBs catered herein before.

S&F MCB, SP, 230 volts, 32 Amp rating, 10 KA, C series fixed in DBs catered herein before.

Supply and laying XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade, cross-sectional area 35 sqmm 4 core (earthed) in trenches including cutting, providing aluminium lugs suitable size and cable glands and nut bolts etc with electrical connection in terminal box and testing and commissioning complete including taking out to XLPE/ PVC insulated cable in all specification all as specified and as directed by Engr-in-Charge.

Excavating in trenches, not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for wall foundation etc or for manholes etc not exceeding 10 Sqm area on plan and not exceeding 1.5 metre in depth and getting out in soft/loose soil.

Returning, filling in, including spreading, levelling, watering and well ramming in layers each not exceeding 25 cm thick in soft/loose soil.

Removing excavated surplus soil to a distance not exceeding 50 metre and depositing where directed at level not exceeding 1.5 metre above the starting point.

M&L for sand cushioning (dry ganga sand) to under ground cable for cable protection with layer of 8 cm deep before laying the cable and 15 cm depth after laying the cable, complete all as specified and as directed by Engr-in-Charge. Note : Only punned thickness of sand will be measured and paid.

M&L for brick, sub class 'B' well burnt, laid dry flat in trenches for protection of cable over LT/HT cable, complete all as specified and directed by Engr-in-Charge.

Labour for boring to hard standing/ plinth protection/ road etc in depth minimum 60 CM for crossing the GI pipe 40 MM dia of bore complete all as directed. Note :- Quoted rate shall be included cost repair to disturbed surface as site.

Supply, fixing on surface of wall / beam pole etc and laid in trench GI tubing light grade in size 40 MM dia of bore with all fittings complete.

M&L in replacement of unserviceable sub main wiring with two single core FRLS PVC insulated unsheathed stranded copper conductor cable confirmimg to IS-694 with copper conductor of size 6 sqmm and drawing through non rigid metallic PVC conduit (concealed in wall) incl 6.0 sqmm FRLS PVC insulated unsheathed stranded copper conductor cable as earth conductor connected to earth and earth dolly in conduit including connecting to main board including non metallic PVC conduit medium grade not less than of 25 mm dia size with all accessories as specified and directed by Engr-in-Charge. Note : Two single core copper conductor of 6 sqmm including earth wire of 6.0 sqmm including PVC conduit will be measured as single unit length

Labour for re-calibration to energy meter single phase static for accuracy class 1.0, 240 V 50 Hz temper proof with replacement to old defective part required for making serviceable and re-setting by authorised agency Incl cabin made of GI sheet 2 mm thick in three side and front wire cage mounting on angle iron frame in size 25x25x5 mm fixed with surface of wall using nut bolt and washer etc incl making all connection as existed and directed. Note :- Test certificate issued by OEM shall be deposited in this office.

M&L in replacement earthing complete with galvanized steel earth plate 600 x600 x 6mm thick, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized GI wire 4 mm dia as earthing lead by means of bolts, nuts, check nuts & washers of galvanized iron or steel besides building at all joints including excavation and earth work, GI pipe light grade 25 MM bore for protection of GI strip from earth electrode and 15 MM as watering with wire mesh funnel charcoal dust, common salt, PCC (1:2:4) type B-1 using 20mm graded stone aggregate for chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4) type B-1 using 20 mm graded stone aggregate reinforced with 6 mm dia round bars @ 75 mm C/C both ways with MS handle 12 mm dia , PGI funnel and wire mesh , 20 mm bore GI Pipe light grade for watering complete all as shown in electrical plate No 3 of SSR Part-I(2009) and connected to earth test point including testing complete all as specified and directed.

Supply only of insulation tap 25 Mtrs long 12.5 CM width ISI marked suitable for 440 volt grade. Note:- (i) Fixing shall be done by DEL. (ii) RV shall be prepared & attach with final bill duly audited.

Supply only to PVC holder with base plate polycarbonate type ISI marked with fixing squire suitable for 440 volt grade 3 pin complete. Note:- (i) Fixing shall be done by DEL & old material shall be deposited in MES store yard by DEL. (ii) RV shall be prepared & attach with final bill duly audited.

Supply only fan regulator stepped electronic flush type 120 Watt 215 volts ISI marked original manufacturer complete. Note:- (i) Fixing shall be done by DEL & old material shall be deposited in MES store yard by DEL. (ii) RV shall be prepared & attach with final bill duly audited.

Supply only PVC insulated multi core copper conductor flexible cable in size 1.0 Sqmm x 3 core for length 100 RM in one roll complete. Note:- (i) Fixing shall be done by DEL & old material shall be deposited in MES store yard by DEL. (ii) RV shall be prepared & attach with final bill duly audited.

Supply only 5 A switch piano flush type 215 volt one way single pole. Note:- (i) Fixing shall be done by DEL & old material shall be deposited in MES store yard by DEL. (ii) RV shall be prepared & attach with final bill duly audited.

Supply only bell AC multi music type complete. Note:- (i) Fixing shall be done by DEL & old material shall be deposited in MES store yard by DEL. (ii) RV shall be prepared & attach with final bill duly audited.

Supply only socket outlet 2 in 1 , 5 pin 5 Amps ISI marked. Note:- (i) Fixing shall be done by DEL & old material shall be deposited in MES store yard by DEL. (ii) RV shall be prepared & attach with final bill duly audited.

Supply only socket outlet 2 in 1 , 5 pin 16 Amps combination ISI marked. Note:- (i) Fixing shall be done by DEL & old material shall be deposited in MES store yard by DEL. (ii) RV shall be prepared & attach with final bill duly audited.

Supply and fixing in replacement single pole and neutral 4 way double door type with 200 Amp rated bus bar sheet metal enclosure distribution board complete.

Supply and fixing in replacement Single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB, 32 Amp, 'C' series as a power unit single phase 220 volt ISI marked complete.

Note :- (i) Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. The contract amount shall be arrived at after deduction of Schedule of Credit from the total quoted amount in BOQ. (ii) Make of material shall be as per mentioned in Particular specifications or Appendix 'B' to Particular specifications as approved by AGE (I) AF manauri

M/S R S Traders

M/S SATISH KUMAR

M/S AM ENTERPRISES

Avion Industries

gangotri enteriprises