REPAIR TO DRAINAGE SYSTEM AND ALLIED WORKS AT CERTAIN LOCATIONS IN TECH AREA UNDER GE (AF) TECH AREA AT AF STN AGRA

Amount

Demolition of brick work built in cement mortar including all quoins, cornices , concrete coping etc on brick work complete all as specified and directed.

M & L for brick work in sub class 'B' Bricks, using old size bricks, straight or curved on plan, exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise spcifically provided for complete all as specified and directed.

M & L for cement concrete type D2, 1:4:8 ( using 40mm graded stone aggregates) as in foundation, filling and mass concrete complete all as specified and directed.

M & L for cement concrete type B2, 1:2:4 ( using 40mm graded stone aggregates) as in surface channels and drains complete all as specified and directed.

Taking down cement plaster on brick wall etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick/concrete surfaces in CM (1:4), finished the surface even and fair complete all as specified and directed.

M&L for cleaning of drain n.exc. 60 cm wide and n.exc 60cm in depth by removing deposited soft / loose soil, vegetation /grass and other foreign material and removal of excavated material to a distance exc 50 m but n.exc. 100 m and deposited wherever directed complete all as specified and directed .

Demolition and breaking up drain pipes (Salt glazed stone ware / Reinforced concrete) of any dia, set in cement mortar complete all as specified and directed.

M&L for Plain Cement Concrete (1:3:6) type C-2 (using 40mm graded stone aggregates) as in concrete bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested for 300mm bore of pipe complete all as specified and directed.

M & L for reinforced concrete pipes 300 mm dia bore class NP2, laid and jointed complete with collars etc complete all as specified and directed.

M&L mild steel framed work such as grills , gratings, etc., with ends of bars shouldered and/ or riveted, or forged in to spikes; framed guard bars ; barred iron doors; ladders; framed balusters ; walk ways ; railings; frame work of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified.

M&L for Preparation of new or previously untreated steel surface of any description and in any position over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Removing RCC drain cover of any size using mechanical arrangements such of fork lifter and refixing of the same / another location etc complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for Precast cover slab casted in RCC (1:2:4) type B-1 (using 20mm graded stone aggregates) of any size including necessary form work and set in cement mortar 1:6, complete all as specified and directed. Note : Reinforcement shall be measured and paid separately

S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F in repair factory made perforated Precast RCC drain cover of 75 mm thick of any size incl 1mm thick MS Sheet all around the cover all as specified and as directed by Engr-in-charge.

M & L for cement concrete type B-0, (1:2:4) mix using 12.5mm graded stone aggregate as in coping including necessary form work all as specified and directed.

M&L for 75 mm thick PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in plinth protection, path/hardstanding/sub base etc complete all as specified and directed.

M & L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-40 Grade with grey cement and pigment, laid and bedded on sand cushioning complete all as specified and directed. Note: Sand cushining shall be measured and paid separately

M&L for sand filling under floors/ paver block or in foundations including watering and consolidation etc complete all as specified and directed

M&L for Providing and laying factory made kerb stone of M-25 gradeof any size cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required including dismantling/demolition of existing one etc complete all as specified and directed

M&L for preparation of new concrete surfaces of any description and applying two coats of exterior emulsion paint with one coat of primer in normal pattern as per manufacturers instructions etc complete all as specified and directed by Engr-in-charge.

deva engineers (BID ID -3219211)

J P CONTRACTORS AND SUPPLIERS (BID ID -3213088)