Repair / renovation of Range Office SF Range Ramban

Removing dry or oil bound distemper,water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc complete

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surfaceto prepare the surface even and smooth complet

Distempering with 1st quality Acrylic/oil bound washable distemper (ready-made) having VOC content less than 50 grams/litre of approved manufacturer and of required shade and colour complete as per manufacturers specifications,one or more coats on old work.

Finishing walls with water proofing cement paint of required shade:Old work (one or more coats applied @ 10 sqm) over priming coat of primer applied @ 0.80 liters/10sqm complete including cost of priming coat

Painting with synthetic enamel paint of approved brand and manufacture of required colour to givean even shade, one or more coats on old work

Making plinth protection 50mm thick of cement concreate 1:3:6 (1 cement:3 coarse sand:6 graded store aggrigate 20 mm nominal size) over 75mm bed of dry brick ballast 40 mm nominal size well rammed and consolodated and grouted with fine sand include finishing the top smooth and curing complete

Repair of plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape,raking out joints preparing plastering the wall surface with white cement based polymer modified self curing mortar,including disposal of rubbish,all complete as per the direction of Engineer-in-charge

Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS:7231 with all fitting and fixtures complete:10 liter capacity

Providing and fixing C.P brass long nose bib cock of approved qualityconforming to IS standard and weighing not less than 810 gms,a ) 15 mm nominal bore

Providing and fixing Wiring for light point/ exhaust fan point/ ceiling fan point/ heating point with 1.5/2.5/4 sqmm FRLS PVC insulted copper conducter single core cable in surface/ recessed medium, modular plate suitable G.I box as required Make:-Anchor/Havells or equvalent.

CFL saver 14 watt or approved quality make:- Anchor/Havels/Orient etc

Providing, installation,testing and commissioning of ceiling fan,Size of Bajaj, Orient, Khaitan, Usha or Polar brand and manufacturers

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-In-Charge

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles above 25mm and upto 40mm

Dismentling of flushing cistern of all types (C.I/PVC/Vitreous china) including stacking of useful materials near the site and disposal of unserviceable material within 50 meters lead

Engage 1 Blacksmith for 4 Days for shifting of store door to other side

Earth work in excavation by manual means over areas (Exceeding 30 em and upto 1.5 mtr in depth,1.5 mtr in width as well as on plan) including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed in :All kind of soil

Providing and laying in position cement concreate of specified grade excluding the cost of centering and shuttering-All work up to plinth level 1:5:10 (1 cement:5 coarse sand:10 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concreate of specified grade excluding the cost of centering and shuttering-All work up to plinth level 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 40 mm nominal size)

Brick work with common burnt clay F.P.S (non modular) bricks of class designation 75 insuprer structure cement mortar 1:6 (1cement:6 fine sand)

Extra for brick work with common burnt clay bricks/cement concreate bricks in superstructure above plinth level upto floor five level.

Providing and laying damp proof course 5 Crnm thick with cement concreate 1:2:4 (1cement:2co,Hse sand 4 graded stone aggrigate 20 mm nominal size I Nallah

Reinforced cement concreate work in walls (any thickness) including attached pilasters,buttersses plinth and string course, fillets,columns, pillars,piers,abutments,posts and struts upto floor five level including curing but excluding cost of centering and shuttering,finishing and reinforcement. 1:1 1/2:3 (1cement 1 1/2 coarse sand:3 graded stone aggregate 20 mm nominal size)

Reinforced for R.C.C work including straightening, cutting, placing in position and binding all complete

Reinfored and shuttermg include strutting, proofing etc and removal of form for Foundations: footing, bases of columns etc for mass concreate

Centering and shuttering including strutting,propping etc and remobval of form for. Lintel beams, plinth beams, girders, bressumers and cantilevers

15mm cement plaster of mix 1:6 (1cement:6 find sand)

12mm cement planter of mix 1:4 (1cement:4 fine sand)

Providing and laying Ceramic glazed floor tiles 300x300 mm (thicjness to be specified by the manufacturers) of 1st quality conforming to IS:15622 of approved make laid on 20 mm thick bed of cement mortar 1:4 (1cement:4 coarse sand) including pointing the joints with white cement and matching pigment etc complete 11.50.1 in colour such as White, Ivory,Grey,Fume Red Brown.

CERAMIC GLAZED TILES Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours shades except burgendy, bottle green, black of any size as approved by Engineer-In-Charge, in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 (1 cement:3 coarse sand) and jointly with grey cement slurry @3.3 kg per sqm,including pointing in white cement mixed with pigment of matching shade complete.

Providing wood work in frames of doors, windows,clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasterners of required dia and length (hold fast lugs or with dash fasterners shall be paid for seprately):Second class deodar wood

Providing and fixing glazed shutters for doors,windows and clerestory using 4mm thick float glass panes including ISI marked M.S pressed but hinges bright finished of required size with necessary screws 35 seconf class Deodar wood

Providing and fixing wire guaze shutters using galvanized M.S wire guaze of average width for aperture 1.4mm in both directions with wire of dia 0.63 mm for doors,windows and clerestory windows with ISI marked M.S pressed but hinges bright finished of required size with necessary screws as per direction of Engineer_in-Charge:Second class deodar wood 35mm

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surfaceto prepare the surface even and smooth complet. 1mm thick

Distempering with oil bound washable distemper of approved brand and manufactue to give an even shade of new work (two or more coats)over and including primin g coat with water thinnable cement primer.

Finishing walls with water proofing cement paint of required shade on new work (two or more coats applied @3.84kg/10sqm)

CEILING Providing and fixing 20mm thick wooden planks ceiling (frame work for base to be paid for sepretely)with M.S screws 2nd class s deodar wood

Providing and fixing plain, square edged wooden beading 65x12 mm section with screws of approved quality for ceiling 2nd class teak wood

Providing and fixing plained eaves boarding 2nd class deodar wood

Applying priming coat: with mixed pink or grey primer of approved brand and manufacture on wooden work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to givean even shade, one or more coats on new work

C.G.I SHEETS Roofing Providing corrugated G.S sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface) excluding the cost of purlins, rafters and trussess and including cutting to size and shape wherever required 0.63mm thick with zinc coating not less than 275 grams/m2

Providing hoisting and fixing trussess/purlins/rafters/posts- plates or like components including cost of screws etc complete Second class Kail wood

Providing and fixing white vitrous china pedestal type water closet (European type W.C pan) with seat and lid 10 liter low level white P.V.C flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231,with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required 18.2.1 W.C pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I brackets 15mm C.P brass pillar taps 32mm C,P brass waste of standard pattern,including painting of fittings and brackets, cutting and marking good the walls wherever required:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P brass pillar taps

Providing and fixing white vitrous china pedestal for wash basin completely recessed at the back for the reception,,of pipes and fittings.

Providing and fixing PVC/supreme brand heavy pipes 100 mm

Providing and fixing CPVC Pipes complete with CPVC fittings and clamps,including cutting and making good the walls etc 15mm dia nominal bore medium

Providing and fixingCPVC pipes complete with CPVC fittings and clamps including cutting and making good the walls etc 20mm dia nominal bore medium

Providing and fixing C.P brass bib cock of approved quality conforming to IS:8931 a) 15mm nominal bore

Providing and fixing C.P brass long nose bib cock of approved qualityconforming to IS standard and weighing not less than 810 gms,a ) 15 mm nominal bore

Providing and fixing of Jet of approved brand

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P brass screws and washers complete

Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C,P brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs,etc complete

Providing and fixing PVC waste pipe including PVC waste fittings complete 32mm dia

Providing and fixing 100 mm stainless steel grating for gully, floor or Nahani trap.

Providing and fixing in position precast R.C.C manhole cover and frame of reqired shape and approved quality.Square shape 350mm internal dimensions.

Providing and fixing PTMT soap dish holder having length of 138mm, breath 1.02mm, height of 75mm with concealed fitting arrangements,weighing not less than 1.06 gms

Providing and fixing C.P stop cock (concealed) of standard design and approved make conforming to IS:8931 a) 15mm nomonal bore

Providing and fixing C.P brass angles valve for basin mixer and gyser points of approved conforming to IS:8931 a) 15mm nominal bore

Providing and fixing Wiring for light point/ exhaust fan point/ ceiling fan point/ heating point with 1.5/2.5/4 sqmm FRLS PVC insulted copper conducter single core cable in surface/ recessed medium class PVC conduct with modular switch, modular plate suitable GI box as required Make:-Anchor/Havels or equvalant.

CFL saver 14 watt or approved quality make:- Anchor/Havels/Orient etc

Providing, installation,testing and commissioning of Exhaust 450 mm dia,Size of Bajaj, Orient, Khaitan, Usha or Polar brand and manufacturers

Providing, installation, testing and commissioning of Gyser of 25Ltr size of Bajaj, Orient, Khaitan, Usha or Polar brand and manufacturers.

Procurement of Furniture and Fixtures as per directed by site incharge

Carrige of Sand

Carriage of Bajri

Carriage of Bricks