REPAIR, CLEANING OF SEWAGE LINE,MANHOLE, SEPTIC TANK AND ALLIED WORKS IN ANC, 2 AREA, 4 AREA, MAP PH-II UNDER AGE BR-II OF GE (AF) ADM AREA AT AF STN, AGRA. (RECALL)

Amount

M&L for excavation in trenches, in soft/loose soil, n. exc 1.5M wide and not exc. 1.5 in depth for foundation etc and getting out complete all as specified and directed.

Ditto all as per item No. 1 above but depth exc. 1.5m not exc. 3.00 m

Returning, filling in, including spreading levelling watering and well ramming in layers n. exc 25cm thick complete all as specified and directed

Removing surplus excavated material to a distance not exc. 50M and depositing where directed complete all as specified and directed.

M&L for PCC (1:2:4) type B0 (using 12.5mm graded stone aggregate) as in benching channel and drains and in coping etc including use & waste of form work in any position and shape for menholes complete all as specified and directed.

M&L for supply, laying, jointing and testing of 150 mm dia salt glazed stone ware drain pipe grade A laid in trenches jointed with CM(1:1), including demolition of PCC in bedding/haunching with taking down of old SGSW pipes of 150mm dia and removal of debris complete all as specified and directed.

M&L for PCC (1:4:8) type D2 using 40mm graded stone aggregate as in bedding including packing under and haunching against the side of 150 mm dia pipe after they are laid and tested complete all as specified and directed.

M&L for roughening of old concrete floor surfaces by picking, sweeping clean and washing down with water to remove dust, etc and applying with brushing neat cement slurry @ 3.0 kg of cement per sq. metre and apply a topping layer of 25mm thick PCC type B1 (1:2:4) (using 20 mm graded stone agg) as in flooring complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete complete all as specified and directed.

M&L for machine pressed rubber moulded precast coloured chequrered cement concrete tiles of size 30cm x 30cm x 25mm thick, set, jointed and pointed witth grey cement and no pigments in neat cement slurry over and incl 20mm thick screed bed in CM 1:4 as in floor finishes complete all as specified and directed.

M&L for providing and laying 60 mm thick factory made chamfered edge precast Cement Concrete paver blocks (interlocking tiles) of M-35 grade with any colour,design & pattern in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer,through vibratory compaction by using plate vibrator,filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M & L for 25 mm thick cement concrete type B1 1:2:4 (using 20mm graded stone aggregate) as levelling course under floor finishes complete all as specified and directed.

M&L for mirror polished machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing over and including 20 mm thick screed bed in cement mortar (1:4) complete all as specified and directed. Note:- The size of kota stone slab not less than 550mmx550mm (cut size except the location where balanced.)

M&L for mirror polished machine cut kota stone slab flooring 18-22 mm thick over cement screed base in risers of steps, skirting, dado and pillars laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing over and including 15 mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

M&L for brickwork with old size fly ash bricks straight or curved on plan with mean radius exc 6.0 m built in CM (1:4) incl demolition built in CM of any description complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces walls, finished even & smooth without using extra cement complete all as specified and directed.

M&L for preparation of old painted of steel/iron/CI pipes surface of any description exceeding 10cm in width or girth and applying one coat of black bituminous paint complete all as specified and directed.

M&L pre-cast RCC (1:2:4) type B-1 (using 20mm graded stone aggregate) cover slabs for man-holes etc set in CM (1:6) incl demolition complete all as specified and directed. Note: Steel reinforcement to be paid separately under respective item

M&L for mild steel TMT bar 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed.

M&L for Dewatering of sludge water from septic tank, soakwell, manholes, oxidation ponds etc. including removing loose liquid meet as grass and vegetation etc. by means of mechanical power transport or by manually with sanitable buckets etc. under foul condition and removed exc. 200 mtr and not exc. 500 mtr and burried underground complete all as specified and directed.

M&L for de-silting of sludge from existing septic tank, soakwell, manholes, oxidation ponds etc. by mechanically or manually and removing of sludge/ debris etc. to any distance out side MOD land and buried underground complete all as specified and directed. Note : Debris and sludge etc. taken out shall be measured in ‘cum’. The quantum of work done for payment purpose shall be the solid content of sludge or debris. Solid content shall be 50% of volume of loose sludge/ debris containing sludge water.

M&L for Cleaning of sewage line any depth and any bore manually or mechanically by taking of sludge water/ night soil, silt and finally cleaning the sewage line by roding and flushing with water to remove all stacking inside the pipe including cutting vegetation growth, bushes and grass etc. around sewage line/manhole to facilitate the work and removing and refixing manhole covers complete all as specified and directed.

M&L for Cleaning of manholes up to 1.50 M depth and taking out sludge, night soil, sludge water etc. manually/ mechanically and removing the same to any out side MOD land and buried underground including cutting vegetation growth, bushes and grass etc. around manhole to facilitate the work complete all as specified and directed.

Ditto all as per item No-24 above but exc. depth 1.50m and not exc. 3.00 mtr deep.

M&L for Cleaning of blockage W.C (E type) or (I type) by opening inspection door bend and using Roding/pressure techinque to clear blockage complete all as specified and directed.

M&L for Cleaning /desludging of existing sewer line from nahni trap/gully trap to 1st manhole manually or by way of any other suitable means of any capacity and depth including taking out sludge in any form and keeping the sewer line functional by roding/pressure complete all as specified and directed.

M&L for Cleaning of blockage/choked floor trap/ Nahani trap/ Guly trap by roding/pressure/pumping complete all as specified and directed.

M&L for cleaning and desludging of covered drains avg depth of debris/sludge not exceeding 450mm including removing out all debris/earth / building mtrl/rubbish and bushes from the drain for smooth functioning and disposal of debris upto 100m distance complete all as specified and directed.

S&F in repair wash hand basin vitreous china white flat back size 550x400 mm including angle iron brakets errecting stand, 01 nos fancy type CP Piller tap of 15 mm bore, 32mm dia PTMT waste coupling, pvc waste pipe and 600mm long PVC connection complete all as specified and directed.

S&F in repair vitreous china pedestal pan EWC, with P or S trap, white with with 32 mm dia PVC flush pipe including plastic water closet seat cover white closed pattern with flat bottom, and mild steel chromium plated or aluminised hinging device (excluding flushing cistern) ,complete all as specified and directed.

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. including making good to floor complete all as specified and directed.

S&F in repair 10 ltr cap. PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float, handle including brackets, and 600mm long PVC connection complete all as specified and directed.

S&F in repair 32 mm dia Semi Rigid PVC waste pipe for for sink and wash basin with length not less than 900 mm complete all as specified & directed.

S&F in repair 100mm bore sand Cast iron soil, waste and vent pipes, in any lengths with or without ears, with cement joints, fixed to walls complete all as specified and directed.

S&F in repair 100mm bore sand Cast iron soil, waste and vent pipes, in any lengths with or without ears, with cement joints, laid in trenches or in floors incl necessary excavation and demolition of PCC etc complete all as specified and directed.

S & F in repair cast iron bends (any radius), diminishing pieces or tapers (larger bore measured),100 mm bore, etc with proper joints complete all as specifed and directed.

S & F in repair 100mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specifed and directed.

S & F in repair sockets (double) collars, bore of pipe in 100 mm, etc complete all as specifed and directed.

S & F in repair cast iron cowls, bore of pipe in 100 mm, etc complete all as specifed and directed.

S & F in repair stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, for 100/110mm bore cast iron/PVC (SWR) pipe complete all as specifed and directed.

S&F in repair 75mm bore sand Cast iron soil, waste and vent pipes, in any lengths with or without ears, with cement joints, fixed to walls complete all as specified and as directed.

S&F in repair 75mm bore sand Cast iron soil, waste and vent pipes, in any lengths with or without ears, with cement joints, laid in trenches or in floors incl necessary excavation and demolition of PCC etc complete all as specified and as directed.

S & F in repair cast iron bends (any radius), diminishing pieces or tapers (larger bore measured),75 mm bore, etc with proper joints complete all as specifed and directed.

S & F in repair stack clamps out of 50 x5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, for 75 mm bore cast iron / PVC (SWR) pipe complete all as specifed and directed.

S&F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches incl necessary excavation and demolition of PCC etc.complete all as specified and directed.

S&F in repair PVC (SWR) plain bend for 110 mm bore pipes of any radius with rubber ring jointscomplete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches incl necessary excavation of demolition of PCC etc.complete all as specified and directed.

S&F in repair PVC (SWR) plain bend for 75 mm bore pipes of any radius with rubber ring joints complete all as specified and directed.

S&F in repair 75 mm dia PVC (SWR) floor trap, plain with grating incl jointing with solvent cement complete all as specified and directed.

M&L in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S&F for in repair 100mm dia bore cast iron floor trap, with grating including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) 20mm gradede stone aggregate complete all as specified and directed.

S&F for in repair 100mm dia bore cast iron nahani trap, with grating including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) 20mm gradede stone aggregate complete all as specified and directed.

M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface incl 15mm thick screed bed in CM 1:6 for laying floor finishes and dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface incl 10mm thick screed bed in CM 1:4 and dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

M&L for renewing floor / glazed tiles in patches, area n exc 5 sq.m. including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles complete all as specified and directed.

Demolition cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for 75mm thick cement concrete type C-1 (1:3:6) (using 20 mm graded stone aggregate ) as in plinth protection finished even and smooth without using extra cement with forming construction joints filled with filler incl demolition complete all as specified and directed.

M&L 40mm thick cement concrete flooring type B-1 1:2:4 ( 20mm graded agg) finishing even smooth with using extra cement complete all as specified & directed

Demolition of cement concrete/ lime concrete of any description as in sunken portion of bathroom/ toilets/kitchen at ground/first floor level & removal of demolished material to a distance exc 250 m and n.exc 500 m complete all as specified and directed.

M&L for PCC filling in sunken portion and mass-concrete type D-2 (1:4:8) (using 40 mm graded stone aggregate) complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as levelling course in floors or in pavings surface complete all as specified and directed.

M&L for two coat of epoxy resin/polymer modified cementaticious coating on concrete/plasterred surface of wall/floor/beam etc. applied as per manufacturer instructions complete all as specified and directed. Make: FOSROC,BRUSHBOND or equivalent.

S&F in repair for Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

SHRI RADHAYSHYAM JHA (BID ID -3082327)

M/S SINGH ELECTRIC CO (BID ID -3082343)

C P Singh and Co (BID ID -3082031)