GE/BAS-46/2025-26 Welcome maintenance to Md and single Offrs accn and certain misc units and repair to facia, chajja, plaster work, glass panes and misc work in Md and OTM accn at Basoli under GE Basoli

Amount

Taking down chowkats or frames with shutters (w/o taking off shutters from the frame) n.exc. 1.5 Sqm complete all as specified and directed.

Taking down chowkats or frames with shutters (w/o taking off shutters from the frame) exc. 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed

Taking down shutters of any description exc 1.0sqm and n.exc 2.0 sqm complete all as specified and directed.

Taking down and refixing incl resecuring and easing shutters area exceeding 1.00 sqm and n.exc 2.00 Sqm each in the same opening complete all as specified and directed

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets/Existing grid, complete all as specified and directed.

S&F 18-20mm thick PVC 100% termite/water proof, fire retrandent eco friendly PVC soild board one side decorative choice laminate and other side balancing white as in kitchen cabinet, cupboard etc fixed with screws to steel/timber frame work etc minimum density not less than 8Kg/Sqm including taking down of old Cupboard of any type complete all as specified and directed.

S&F factory made 18-20 mm thick HDHMR high density board as cupboard shutter /shelves complete with minimum density not less than 8Kg/Sqm including as per manufacturer's instruction individual member will be measured for payment purpose as directed including taking down of old Cupboard of any type complete all as specified and as directed Make: Action Tesa, Green ply, Century or equivalent make.

M&L for 8 mm thick designer ceiling board in ceiling fixed in ceiling laid over and including hot dipped galvanised iron grid (powder coated) with 24 mm wide T section exposed flange. The frame work shall comprise of main runner made from 0.33mm thick galvanished steel sheet spacing at 600X600 mm and perimeter wall angle shall be of size 19X19mm complete all as specified and directed.

Material and Labour for Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, complete all as specified and directed.

Material and Labour for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and directed.

S&F For Glazed and skelton shutters 35mm thick of 2nd class HW open rebated and prepared to receive glass or wire gauze etc. shutters divided in square with sash bars, size of members of shutters as specified in SSR Part-1, secton 8, clause 8.20(a) complete all as specified and directed.

S&F For Plain framed factory made 35mm thick shutter of 2nd class HW (two panel) with lock rail and panels of 12mm veneered particle board with commercial veneering on both faces, the size of rail and style as per IS 1003 (Part-1) kiln seasoned and pressure treated complete all as specified and directed.

S&F Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, 30mm thick complete all as specified and directed.

M&L For Painting to new wooden surfaces including prepration of surface and applying one coat of pink primer and two coats of synthetic paint.complete all as specified and directed

M&L Preperation of old wooden surface and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L Preperation of old steel surface and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for Pressed steel frame for doors of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming icomplete all as specified and directed

M&L for Pressed steel frame for doors of size 125 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming icomplete all as specified and directed

M&L Pressed steel cup board frame of MS sheet 1.25 mm thick size of frame 60 x 40 mm with rebate of 20 mm wide and 12 mm deep complete all as specified and directed.

M&L For PCC 1:3:6 type C-0 using 12.5mm graded crushed stone aggregate as in back filling of chowkats Complete all as specified and directed.

S&F in repair/new MS 300mm ordinary rat tail rod pattern springs including roller and roller plate.complete all as specified and directed.

S & F in repair/new Butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked complete all as specified and directed

S & F in repair/new Aluminium handles cast type anodised of size 150mm long ISI marked complete all as specified and directed

S & F in repair/new 200mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified and directed.

S&F in repair/new 100mm door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S & F for Continuous (piano) hinges (40mm flap), mild steel, bright finish or eletrogalvanised complete all as specified and directed.

S&F in repair/new Magnetic catcher 50mm for cupboard complete all as specified and directed.

M&L sliding channel with all assories for cupboard/ almiraha. Any size any type for md offrs accn complete all as specified and as per sample kept in GE office. Make:-Hettich,Godrej, Harrison or equivalent

M&L in repair for crank hinges for kitchen cupboard/ almiraha any size any type for md offrs accn complete all as specified and as per sample kept in GE office. Make:-Hettich,Godrej Harrison or equivalent

M&L for steel fancy handle 150 mm sizefor kitchen cabnet complete all as specified and as per sample kept in GE office. Make:-Hettich,Godrej Harrison or equivalent

M&L for steel fancy handle 300 mm sizefor kitchen cabnet complete all as specified and as per sample kept in GE office.Make:-Hettich,Godrej Harrison or equivalent

S & F hasp & staple safety type aluminium anodised with mild steel hinges Spin including bolt to hinges plate fixed with screws of 75 mm in length.complete all as specified and directed.

S&F in repair Brass Mortice lock for Aluminium doors with fittings, concelead type, size 100 mm including complete accessories complete all as specified and directed.

S & F in repair/new 250mm long aluminium alloy anodised sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete all as specified and directed.

S&F Steel windows/ventilator (Box type) factory made glass/glazed shutter and including shutter for wire mesh and Glass (glass panes and wire mesh shall be measured and paid separately) of size 79mmx39mm,16 gauge rectangular tubular frame with side hung shutter with glazing bars 12x3mm flat iron incl box type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 100mm long and 10mm square bar grills and two coat of synthetic enamel paint over a coat of red oxide primer including taking down of old windows complete all as specified and directed.

S&F Sheet glass, ordinary quality 3mm thick and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and directed.

S&F 3.00 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and directed.

S&F in repair/new Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F Galvanised MS wire cloth 0.46mm nominal dia of wire and average width of aperture 1.18mm, complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, over 10cm width or girth, not otherwise describe applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F for door sealer (snake guard) and incuding taking down old snakguard complete all as specified and directed.

S&F in repair Corner Glass Shelf (with Bracket) complete all as specified and directed.

S&F in repair Wall Mixer 3-in-1 System with Provision for Overhead Shower Complete with 115mm Long Bend Pipe on Upper Side, Connecting Legs & Flanges (without Hand & Overhead Shower) complete all as specified and directed.

S&F in repair Sink Mixer with Swinging Spout (Wall Mounted Model) with Connecting Legs & Wall Flanges complete all as specified and directed.

S&F in repair 2 way CP Bib Cock with wall flange, cast copper alloy, chromium plated fancy type, sutable for 15 mm GI pipe, complete all as specified and directed.

M & L in repair 5 mm thick Glass Panes of any colour including with rubber gasket and beading /Glazing clip size all as specified and directed

S&F Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed

Anodised aluminium grills, 6mm dia size 100x100mm fixed to aluminium windows and thickness of powder coating not less than 50 micron, complete all as specified and directed.

S&F Powder coating aluminium window and ventilator shutters, side hung type without sash bars, with double side shutters wire gauged shutter & glass glazed shutter aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (2 No), hinges type B-21 100mm long (4 Nos) suitable handle (4 No), tower bolt (4 Nos) complete all as specified and directed. (Note:- Aluminium section size specified above if not available in the market next immediate higher size of same make shall be provided without any extra cost to the Govt.)

S & F in repair Door closer of aluminium (Die cast body), hydraulically regulated, designation No 2, universal type, suitable for door shutters of weight between 36 to 60 Kg, ISI marked, complete all as specified and directed.

Supply and fixing in repair stainless steel plate rack 750 x 600 x 230 mm deep with spoon holders, shelves, fix to wall with suitable screws, washers, nut-bolts and necessary drilling etc. Including making good to disturbed portion in cement mortar (1:4) to wall etc, complete all as specified and directed.

S&F in repair Sink with drainage board made of stainless steel 0.9 mm thick kitchen or labourator with plug washers and waste pipe, incl bedding in CM to drwaf wall or incl fixing cantilever brackets and conecting union to pipe over all size 915mmx450mm bowl size 410mm x 330mm x 160mm.complete all as specified and directed.

S&F in repair Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug,waste coupling , waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S & F Stainless steel gratings with or without Hole 100/125mm dia fixed with cement motar/ white cement complete all as specified and directed.

S&F in repair flush pipe of polyethylene of low or high density or PVC 32 mm dia, for wash hand basin / sink complete all as specified and directed

S&F in repair Pillar tap cast copper alloy fancy type with capstan heads, chromium plated Fancy type screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long shanks and nut screwed for iron pipe of 15 mm bore complete all as specified and directed.

S&F in repair 15 mm CP long body bib tap fancy type cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed

S&F in repair 15 mm CP bib tap fancy type cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed

S&F in repair CP angle/stop valve of cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for uniorns and fixed 15 mm bore complete all as specified and directed.

S&F in repair chromium plated shower roses with or without swivel joints 125mm size including fixing to steel pipe or union complete all as specified and directed.

S&F in repair chromium plated health faucet ABS body with 1.25 mtr long flexible tube and ABS wall hooking including making connections and fixed in position complete all as specified and directed.

S&F steel water tubing galvenised, 15mm bore, medium grade with all fittings and fixed to walls, concealed wiring including cutting chases in walls etc and taking up or down steel water tubing and connection complete all as specified and directed.

Refixing only steel water tubing galvenised, 15mm bore, medium grade with all new fittings and fixed to walls, concealed wiring including cutting chases in walls etc and taking up or down steel water tubing and connection complete all as specified and directed.

S&F steel water tubing galvenised, 20mm bore, medium grade with all fittings and fixed to walls, concealed wiring including cutting chases in walls etc and taking up or down steel water tubing and connection complete all as specified and directed.

Refixing only steel water tubing galvenised, 20mm bore, medium grade with all new fittings and fixed to walls, concealed wiring including cutting chases in walls etc and taking up or down steel water tubing and connection complete all as specified and directed.

Supplying and laying of 20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.including all necessary fittings to join CPVC TO GI Pipes, FTA,MTA,bends,Tee etc including taking out old GI pipe with fitings complete all as specified and directed Note: Rates are inclusive of Brass T, Brass Elbow, MTA, FTA, for provision of sanitary/plumbing fittings where ever required all as directed.

S & F in repair Gun metal,globe or gate valve screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions, for bore of pipe 15 mm complete all as specified and directed.

S & F in repair Gun metal,globe or gate valve screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions, for bore of pipe 20 mm, complete all as specified and directed.

S & F in repair Gun metal,globe or gate valve screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions, for bore of pipe 25 mm, complete all as specified and directed.

M&L for Rotational moulded polyethylene water storage tank 3 layer white colour water tank (specific density of 25gm/Ltr), non- toxic effect, algea formation protection (made from Virgin grade of polyetylene material which is duly stablized with anti-oxidentPlastic) of capacity 1000 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer, 20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc including taking down existing tank complete all as specified and directed.

M&L for Rotational moulded polyethylene water storage tank 3 layer white colour water tank (specific density of 25gm/Ltr), non- toxic effect, algea formation protection (made from Virgin grade of polyetylene material which is duly stablized with anti-oxidentPlastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc including taking down existing tank complete all as specified and directed.

S&F in repair Vitreous China, wash basin white, flat back , size 630x450 mm including brackets of any size, including cutting for and pinning in ends of brackets or erecting stand including fixing and supply of waste pipe of 32 mm dia, waste coupling of chromium plated brass complete all as specified and directed

S & F Vitreous china wash basin including padestral coloured, flat back, Approx Plan size 630x 450 mm including, waste fitting chromium plated brass, chromium plated steel chain and rubber plug, porcelain stopper, a pair of CI brackets, waste pipe and excluding pillar tap etc., fixed in repairs complete all as specified and directed

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair 25mm outer dia stainless steel decorative drapery rod of thickness 20 gauge and for every 01 RM length, with stainless steel brackets near to ends with stainless steel finials for 25mm dia drapery rod at both ends. The drapery rod shall be projecting 150 mm outer side from the clear opening of doors/windows (Including necessary fittings) complete all as specified and directed.

S&F in repair flushing cistern with 10 ltrs discharge capacity PVC flushing cistern low level with inlet ball valve etc. complete all as specified and directed.

S & F in repair Vitreous China squatting pan “Orissa pattern” size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with CI ‘P’ trap of long arm of suitable size including connection to flush pipe, anti symphonic pipes etc, complete all as specified and directed.

S&F in repair wash down water closet (Pedestal pattern) white with P or S trap including Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern and plastic water closet seat & cover mild steel chromium plated or aluminised hinging device and connection to low level flushing cistern and flush pipe, etc complete all as specified and directed. Cera Cat Part No: S1053121 or equivalent in Jaquar/Prayag/Kohler.

S&F in repair EWC seat cover (white) flat bottom solid with CP hinging device, nuts and bolts and connections etc., complete all as specified and directed.

S & F CI/ PVC Lid/Cover Suitable for CI Oval Acess door bend of Size 100/75 mm including dismantling of exixting lid, complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rails 20mm dia D type 60cm long between flanges complete all as specified and directed.

S & F in repair ball brass valves, high pressure, (ISI Marked) with polythene float and liynut complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore of pipe all as specified & directed.

Disconnecting existing tanks, setting side for repairing , cleaning and removing all scale and dirt, etc and hoisting after cleaning and removing all as specified and directed etc from tanks of circulating pipe etc of capacity upto and including 500 ltrs and endorsed the word "CLEANED ON WITH DATE" with white paint including replacement of broken/unserviceable fitting such as Elbow, tee, socket, nipple of any size etc complete all as specified and directed.

Disconnecting existing tanks, setting side for repairing , cleaning and removing all scale and dirt, etc and hoisting after cleaning and removing all as specified and directed etc from tanks of circulating pipe etc of capacity exc 500 ltrs and upto & including 1000 ltrs and endorsed the word" CLEANED ON WITH DATE' with while paint including replacement of broken/ unserviceable fitting such as Elbow, Tee, socket, nipple of any size etc complete all as specified and directed.

Taking down cement plaster on brick or concrete surface including racking out joints hacking for key scrubbing down with water etc. complete all as specified and directed.

M&L Rendering 15 mm thick in CM 1:4, on external surface, etc. finished even and smooth without using extra cement complete all as specified and directed.

M&L Rendering 10 mm thick in CM 1:6, on internal surface, etc. finished even and smooth without using extra cement complete all as specified and directed.

Material ad labour for preparation of Old plastered surfaces of walls & applying two coats of oil bound distemper including smoothing of plastered surface by applying wall care putty and one coat of primer complete all as specified and directed.

Material ad labour for Preparation of old decorated brick /concrete, plastered /un-plastered surfaces of ceilings, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, oil, greasy spots , rubbing with sand paper and applying two coat of white wash on ceiling, complete all as specified and directed.

M&L for Preparation of old decorated surfaces of wall and facia and applying one coat of weather proof apex paint upto Third Floor of any tint etc complete all as specified and directed

Preparation of New decorated brick/concrete/ plastered/unplastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots, rubbing with sand paper and applying two coat of oil bound distemper on walls, pillars,cornices surface including making good uneven surface/holes with birla wall care putty coloured in same shade where ever required etc. complete all as specified and directed.

Preparation of new plastered/ concrete surfaces of walls and applying two coats of cement based paint over and including one coat of primer (up to 2nd storey with necessary/scaffolding) complete all as specified and directed .

Preparation of old decorated brick/concrete/ plastered/ unplastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots, rubbing with sand paper and applying two coat of cement base paint on walls, pillars, cornice etc (upto 2nd storey with necessary scaffolding complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.complete all as specified and directed.

S&F for Rolled sections as in main and cross beams, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed.

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars (MS Flat), barred iron doors; ladders, framed balusters; walk ways; railings; framework of water tanks, framework for PPGI chajja and similar work conforming to Fe.290.Gde-E-165 complete all as specified of design and as directed by Engr-in-Charge. Guard bars to be fixed in brick work with hold fast/ fasteners etc embedded in PCC.

M&L for steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 at grade st 240 complete all specified and directed.

S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing sheets of any description complete all as specified and directed.

S&F for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing sheets of any description complete all as specified and directed.

Demolition of cement concrete unreinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for glazed designer ENDURA tiles, coloured 30cm x 30cm x 8-10mm thick set jointed and pointed in neat cement slurry pointed in white or coloured cement to match in floors over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for Filling of sunken floor with PCC 1:5:10 using 40mm graded crushed stone aggregate including breaking and removal of existing filling of lime concrete/PCC/brick bats and rubbish out off the premises, etc complete all as specified and directed.

M&L 75 mm thick Cement concrete 1:3:6 type D-2 (using 40 mm graded crushed stone aggregate) as in sub base complete all as specified and directed.

M&L 75 mm thick 1:3:6,Type C-2 (using 40mm graded crushed stone aggregate) in plinth protection etc.laid in alternate bays complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B-1 (using 12.5mm graded crushed stone aggregate) as in flooring including finishing the top surface even & smooth, without using extra cement complete all as specified and directed .

Material and labour for Providing, cement concrete 1:2:4 type B-1 (using 20mm graded aggregate ), in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed .

M&L for 50 mm thick PCC 1:4:8 type D-2, using 40 mm graded crushed stone aggregate, as in subbase complete all as specified and directed.

M&L for 100 mm thick PCC 1:3:6 type C-2, using 40 mm graded crushed stone aggregate, as in subbase complete all as specified and directed.

S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane including Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

S&F Figured glass 3mm thick, pin head type and glazing with oil putty in squares in exc 0.5 sq.m in each pane including Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

M&L cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone agg) of uniform thickness , top surface of plain concrete padding shall be finished even & fair w/o using extra cement complete all as specified and directed.

APP modified roof treatment over existing non-accessible RCC roof slab/chajjah/canpoy/parapet wall to be executed through approved applicator of the membrane manufacturer with following specification complete all as specified and directed:- (a) Cleaning existing surface properly. (b) Applying oil bound bitumen primer @ 0.30 liter/Sqm manufactured by the same agency as that of APP with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface. (c) Laying not less than 3mm thick APP modified water proofing membrane weighing not less than 3.60Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gsm/Sqm using butane torch by application with 10cm side laps and 15cm end lap. Laying of membrane, Physical property of membrane shall be as under:- (i) Membrane weight not less than 3.60Kg/Sqm (ii) Non woven polyester weight not less than 160gsm/Sqm. (iii) Softening point of membrane not less than 150 degree Celsius. (iv) Joint tensile strength-longitudinal not less than 650/sqcm and transverse not less than 450/sqcm at 230 degree Celsius. (v) Tear strength-longitudinal not less than 300N & transverse not less than 250N. (vi)Elongation of reinforcement not less than 30%. (vii) Impermeability under water pressure not less than 3Kg/Sqcm. (d) App membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap. (e) Top of membrane shall be provide with solar reflective bituminous aluminum paint @ 0.1KG/Sqm as prescribed by manufacturer of membrane.

supply only Liquid water proofing compound complete all as specified and directed

Demolition cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L Reinforced cement concrete 1:2:4 type B-1,using 20 mm graded crushed stone aggregate as in shelves/slab etc including necessary form work complete all as specified and directed.

M&L TMT bars 8 to 10mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

Demolition of brickwork or stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed

M & L Brick work with sub class `B' bricks straight or curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:6 complete all as specified and directed

All as per item No 122 here-in-before but except bricks complete all as specified and directed

M&L For Rendering 10mm thick in cement and sand mortar 1:6 on fair faces of brick work or cement concrete surfaces including finishing the sufaces even and smooth without using extra cement including Preparation of newly plasterd surfaces of walls and applying two coats of oil bound distemper over one coat of primer and wall care putty including taking down old plaster complete all as specified and dirceted.

M&L For Rendering 15mm thick in cement and sand mortar 1:4 finished fair even and smooth without using extra cement including Preparation of newly plasterd surfaces of walls and applying two coat of cement base paint over a coat of primer including taking down old plaster complete all as specified and dirceted.

M&L Rendering 5mm thick in CM 1:3 on any sufaces of brickwork, finished even and smooth without using extra cement including Preparation of new plasterd or unplastered surfaces of celling and applying three coat white wash on ceiling including taking down old plaster complete all as specified and dirceted .

M & L for preparation of old decoratede plastered or un plastered surface of wall and applying one coat of cement base paint including scaffolding and filling the gap or unequal surface with cement mortar/chalk whiting/Putty upto Third Floor of any tinnt to match existing shade complete all as specified and directed.

M&L For making good the surfaces of chajjas, facia with cement mortar 1:3 or PCC 1:1.5:3 including steel bars 8mm/10mm/12mm/16mm/as per site requirement with stirrups Including taking down , dismantling of broken/loose portion of chajjas, facia of any dimention and making good the surfaces with cement mortar 1:3 or PCC 1:1.5:3 including steel bars 8mm/10mm/12mm/16mm/as per site requirement with stirrups , including welding work if required and necessary form works /scaffolding and matching with existing sufaces of facia,(including white wash /colour wash or cement base paint /apex paint as directed by Engg in-charge) including water curing complete all as specified and directed. Note: The work shall be carried out by necessary form work /scaffolding and removed after the completion of work and safaty norms will be maintained by contractor as per safety Manual.

S & F in repair for vitreous china wash down one piece water closet Pan (EWC) itallion collection (RENE starwhite )of size 59cmx36cm x71cm (pedstral pattern )complete series ,white including Vitreous china flushing cistern (inBuilt with EWC) & plastic water closet seat white closed pattern with flat bottom and cover and MS chromium plated or aluminium hinges device including connection to drain (outgoing pipe) and to flush pipe, antisyphonage pipe etc comlete all as specified and directed.

M&L for Granite (of any type), 18-20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platform including moulding, rounding , chamfering and making hole for Gas pipe and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixer of pigment to match with marble shade including dismantling old granite slab complete all as specified and directed.

S&F Glazed ceramic tile 450x300x7mm thick (coloured) on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick bedding layer in cement and sand mortar 1:4 including dismantling floor, hearth or wall tiling and cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified and directed

M&L for Vitrified tiles 8mm thick (Square/reactangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15 mm thick in CM 1:6 including dismantling floor, hearth or wall tiling and cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified and directed.

M&L for Vitrified tiles 8mm thick (Square/reactangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting/dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10 mm thick in CM 1:4 including dismantling floor, hearth or wall tiling and cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified and directed.

M&L for Non skid ceramic tiles 7 to 8mm thick (Square/reactangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jounted neat cement slurry and pointed in white or coloured cement to matchincluding Screed bed or bedding layer of mortar 15 mm thick in CM 1:6 including dismantling floor, hearth or wall tiling and cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 0f 60mm thickness with grey cement and pigment, M-35 grade including 50mm thick layer of sand cushioning complete all as specified and directed.

S&F in repair Chromium plated Soap dish, fixed to plugs with chromium plated brass screws complete all as specified and directed.

Supply only accessories (legs, nipple, cup etc.) for CP wall mixer/Basin mixer suitable for 15 mm dia pipe, complete all as specified and directed.

S&F in repair 15mm bore fancy type Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair WHB mixer, Brass chromium plated mixer for mixing hot & cold water screwed down for iron pipe and fixed with15 mm bore pipe including all necessary fixing arrangement complete all as specified and directed.

S & F in repair 110 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed

S & F in repair 75 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed

S & F in repair 110 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints, laid in trenches or floor complete all as specified and directed

S & F in repair 75 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints, laid in trenches or floor complete all as specified and directed

S & F PVC (SWR) Bends in any radius 110 mm bore with access door in repair complete all as specified and directed

S & F PVC SWR Bends in any radius 75 mm bore with access door in repaircomplete all as specified and directed

S & F PVC (SWR) plain Bends in any radius 110 mm bore complete all as specified and directed

S & F PVC SWR plain Bends in any radius 75 mm bore complete all as specified and directed

S&F in repair PVC (SWR) junction single (Single T) equal or unequal 110 mm bore complete all as specified and directed.

S&F in repair PVC (SWR) junction single (Single T) equal or unequal 75 mm bore complete all as specified and directed.

PVC reducers 110 x 75 mm complete all as specified and directed.

S&F PVC (SWR) Vent cowl 75 mm bore in repair complete all as specified and directed.

S&F in repairs for 110mm bore PVC (SWR) P trap plain complete all as specified and directed

Supply and fixing in repair PVC (SWR) floor trap 75 mm dia plain with CP grating including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

Repair to existing PVC pipe/CI pipe including making the joints water tight by using suitable material including cleaning if required and refixing of any dia. Note : Work to be carried out up to 2nd storey bldg in any condition of working place/area

Material and labour for Sealing of WC/Floor traps joint and joints between rain water pipe and roof by using neat white cement paste or leak proof material and making the joint leakproof in case seepage is observed from WC/Floor trap and joint of rain water pipe and roof slab. Note : Work to be carried out up to 4th storey bldg in any condition of working place/area

S&F in repair Toilet paper holder with flat recessed type stainless steel complete all as specified and directed.

M&L for rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) with WPC in sunken floor with proper slope including application of 3mm APP membrane using bituminous coating @ 3.00 Kg/Sqm complete all as specified and directed. (WPC shall be measured and paid separately).

M&L for Welding in repairs exc 2.5cm but n. exc. 5 cm in length, thickness of metal to be welded exc, 6mm but n.exc. 9mm, including all necessary arrangement for welding complete all as specified and directed.

Ms International Engineers (BID ID -3354396)

kailu construction co (BID ID -3353910)

M/S SURINDER KUMAR MAHAJAN (BID ID -3361849)

KAPOOR AUTOMOBILES (BID ID -3361799)

Shiva Builders (BID ID -3354441)

Ashoka Engineers (BID ID -3361711)

M/S V K TRADERS (BID ID -3361713)