Renovation of Director, DFSs room at Directorate of Forensic Science, Assam, Kahilipara, Guwahati-19

Amount

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge: Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete : Size of Tile 800x800 mm

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm).

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level : Cement mortar 1:3 (1 cement :3 coarse sand)

15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand)

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.13.85.3 With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour : Two coats

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250x10 mm

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Providing and fixing bright finished brass handles with screws etc complete: 125 mm

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. : 20 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) External work : 25 mm nominal dia Pipes

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipe : 110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion : Single tee with door

Bend 87.5° : 110 mm bend

Coupler : 110 mm

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 25 mm dia nominal bore

Supplying, fitting and fixing Vertical Blinds as specified and directed by the department at all levels.

Providing and fixing of Jaquar Make Hand Shower (Health Faucet) with 8mm Dia, 1.2 Meter Long Flexible Tube & Wall Hook (ALD-573) as directed by the concern Department

Providing erecting cutting and fixing of 550 mm depth free standing book storage cupboards with laminated finished , erected/making to be made with 19 mm thick Greenply Plywood on all frame structure and required partition with self member as per required height with providing fixing of edge binding in all plywood edges cuitting and pasting with fixing for 1.5 mm thick decorative laminated sheet in both side of ply surface inluding all hardware fittings like, nails, fevicol, pesting tap, handle, lock, hingesetc. as a complete with all necessary required materials and labour as directed by the concerned department.

Providing and fixing of Jaquar Make 2 Way Bib Cock With Wall Flange (FLR-5041N) as directed by the concern Department

Providing and fixing of Jaquar Make Bib Cock (Straight Line Model) With Wall Flange (FLR-5047N) as directed by the concern Department

Providing and fixing of Jaquar Make Pillar Cock (FLR-5011N) as directed by the concerned Department

Providing fitting & fixing WPC toilet Door (30 mm) with frame including Door handle & Tower bolt (size: 750 mmx 1950mm) etc. as directed by the department

Supplying, fitting and fixing PVC Panels for wall and ceiling (plain) with materials & instalattion including labour, carriage etc. As directed and specified

Providing making and finishing of 76 mm thick full height, wooden partition with partily solid/glazed partition, to be made with 50mm x 50mm sal wood frame structure for 600mm c/c in bothways and fixing of 19 mm thick green Marine plywood on over salwood frame structure and fixed supported from existing rcc slab with fixed, pasting and finishing of 1.5 mm thick decorative laminated sheet on over existing ply surface in both side including fixing of 8 mm thick toughened glass as per required of size including glass fixing to wooden member as a similar colour combination of the laminated finished wooden partition. the work complete with all necessary hardware materials. like, fevicol,nails,screws,abro tape.etc. and making labour as per directed by the concerned authority.

Providing and fixing 30 mm thick flush door shutters non decorative type, core of block board construction with frame of 1st class hard wood& pasting of 1.5 mm thick decorative laminated sheet on both faces of shutters including necessary fittings as directed by the concerned department

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required : Group C

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.: 3 pin 5/6 amp socket outlet

5/6 amps switch

6 pin 15/16 amp socket outlet

15/16 amp switch

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required: 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.: Single pole

Providing and fixing following rating and breaking capacity and pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required : 100 Amp, 30KA, FPMCCB

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. Supplying, installation, testing and commissioning of Hi-wall 2.0 vTon invertor 5 star rating non ducted split type air conditioner with remote complete with copper pipe and complete electrical connection as approved by the deptt. Up to 3m between the room unit and out door ubit as directed by the deptt. (Blue star or equivalent make)

Supplying with fitting and fixing Voltage stabilizer 4.0 KVA of the following specification complete including making necessary connection as approved specified and directed by the deptt. (Voltas or equivalent make)

Supplying with fitting and fixing and connection as approved by the deptt. 1/2 inch & 3/4 inch copper piping with insulation along with connection as approved by the deptt. cable including testing and commissioning as directed by the deptt.

Supplying installation, testing& commissioning of AC Starter as specified and directed by the department.

Supplying with fitting and fixing of Angle iron framing made 50 mmx 50mm x5mm size angle iron fpor accommodation of 1.00 Ton to 2.00 Ton Window /split type A.C machine

Supplying and fixing of 3 Pin top 6/16 Amp socket including connection as approved by the department complete as required.

Supplying, installatuion, testing & commissioning of 66 W LED Recesses Laminaries SMD LED chip as per LM 80/IS 6106 make Wipro or equivalent as specified and directed by the department.

Supplying, installatuion, testing & commissioning of 36 W LED Recesses Laminaries fixture in fit 2x2 make Phillips or equivalent as specified and directed by the department.

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required.: 3 Module (100mmX75mm)

6 Module (200mmX75mm)

Supplying installation, testing & commissioning of ceiling fan 1200 mm sweep 1800 make Havells or equivalent as specified & directed by the deptt.

Supplying Exhaust fan 300mm make Anchor or equivalent as specified & directed by the deptt.

M/S M. K. Enterprise

PALASH MONI GOSWAMI