SPECIAL REPAIR TO BATH ROOM KITCHEN IN QTR NO P-2/2 AT BARABANKI MIL STN UNDER GE (EAST) LUCKNOW

Amount

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc all as directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches , pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles.

M&L for brick work old size brick sub class 'B' bricks,straight or curved on plan exc 6 m mean radius,built in in CM (1:6) etc complete, all as directed.

M&L for Brickwork with sub class "B' old size brick straight or curved on plan to any radius in half brick thick built in cement mortar 1:4 etc complete, all as directed.

M&L for rendering 10 mm thick in cement mortar 1:6 on fair faces of brick work of walls, finished even & smooth without using extra cement etc all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair face of brick work of walls, mixed with water proofing liquid apply as per manufacturer’s instructions, finished even & smooth without using extra cement complete all as specified. incl mouldings, chamfers, splay srounded or coved angles, beads,grooves and rebate upto 10 cm in width or 15 cm in girth. Note : - Supply only water proofing compound shall be measured and paid for separately.

M&L for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement, complete, all as specified.

Supply only Liquid water proofing compound, ISI Marked.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade over a coat of primer complete all as specicified.

M&L preparation of newly plaster surfaces of wall and applying two coat of cement base paint with one coat of primer on wall/ceiling etc all as specified and directed.

M&L preparation of newly plaster surfaces appling three coat white wash on ceiling

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as spd/directed by Engr-in-Charge.

M&L for non skid ceramic tiles (coloured) 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors joints free, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified and as directed.

S&F vitrified ceramic tiles dark/light shade digital tiles/(double charged), 10mm thick (square/ rectanglar) polished , exceeding 0.18 sqm of each tiles not exceeding 0.38 sqm, in floors etc. laid over 15mm thick screed bed 1:6 , set and jointed in neat cement slurry and pointed in white/coloured cement to match complete all as specified.

M&L for glazed ceramic tiles (coloured) 300x600 x 7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10 mm thick rendering in cement & sand mortar 1:4, complete all as specified and as directed.

Demolation of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any motar etc all as specified and directed.

M&L Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 20mm thick screed in CM 1:4 complete all as specofied and directed by Engr-in-Charge.

Rounding to edges of stone slabs one edge, such as in steps, cooking plateform and other similar situation complete all as directed.

Taking up or down steel water tubing and connections of 15mm bore, fixed in walls, ceiling, floors, trenches etc. all as directed.

Taking up or down steel water tubing and connections of 20mm bore, fixed in walls, ceiling, floors, trenches etc. all as directed.

Taking up or down steel water tubing and connections of 25mm bore, fixed in walls, ceiling, floors, trenches etc. all as directed.

M&L for cutting chases, pinning in, making good to facings as original where required and pointing in cement mortar 1:3 for concealed water tubing etc. and making good, cutting not exc 10 cm girth in brick walls.

M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors.

M&L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors.

M&L for galvanized steel water tubing medium grade of 25mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors.

S&F for in repair three layer rotational moulded polyethylene water storage tank cylindrical hoisted & fixed in position incl dismantiling water tank complete all as specifed capacity 1000 ltrs.

S&F in repair vitreous china floor/wall hung WC with flushing cistern, UF seat cover, hinges, accessories set of size 375 x 650 x 800/370 x 645 x 810 mm fixed to wall/floor with P/S trap complete as per manufacture's instructions.

S&F for Vitreous china (Counter type) WHB White (C, size 495x395x150 mm with waste coupling waste pipe of 32mm dia all as specified and directed.

S&F SS grating 125mm dia with waste hole

S&F in repair PVC connection 450 mm with wire braided long suitable for 15 mm bore GI pipe including CP brass nuts on both sides, complete, all as specified.

S&F in repair long body 15mm bore bib tap, cast copper alloy, chromium plated fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & directed.

S&F in repair 15 mm dia chromium plated fancy type stop cock/ angle valve/conceled cock, pipe with capstan head long screwed shank including cp cover plate etc all as specified and directed.

S&F in repair 15 mm bore CP brass single lever Central Hole Basin mixture fixed to GI pipe.complete all as sp and directed.

S & F in repair 15 mm bore brass CP wall mixer for mixing hot & cold water with provision for over head shower with arm and long bend pipe and wall flanged screwed down for iron pipe etc complete all as specified and directed.

S&F in repair hand shower (Health faucet) with 1 Mtr flexible tube with wall hook bracket etc, complete set of superior quality all as specified and directed

S&F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms)

S&F in repair toilet paper holder CP fixed complete all as specified and directed.

S&F in repair PVC bath cabinet with 4 mm thick loocking mirror of overall size 560 x 410 mm fixed on wall etc complete all as specified and directed

S&F in repair glass corner self assembly, fancy type, made of 6 to 7mm thick sheet toughened glass of size 250x250mm, fixed with CP brackets, complete, all as specified and directed.

Supply & fix in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long.

S&F in repair CP brass tubular towel rail, 20mm dia, ‘D’ type, 60cm long between flanges, fixed to PVC rawl plugs with chromium plated brass screws, complete all as specified.Make:

S&F in repair 40mm bore PVC low density (LDPE) pipe of pressure 6kg/Cm2 fixed to wall or laid in floor, complete, all as specified.

S&F in repair brass chromium plated shower rose 125 mm size without swivel joint including fixing to steel pipe of 15mm bore or union complete all as specified.

S & F in repairs PVC floor trap/nahani trap plan with grating of 100 mm size including jointing to waste pipe with cement joints etc complete as directed

Supply and fixed in repair stop valves, 15mm dia, cast copper alloy,CP fancy type with long shank and cup(concealed type) screwd down,high pressure with crutch or butter fly handle,screwed both ends for iron pipes or for unions and fixed in pipe all as specified and directed.

S&F in repair 32 mm dia of discharge pipe bottel trap of PTMT having minimum water seal of 25 mm .(Minimum weight 32 mm -260 gms/40 mm-270 gms) etc all as specified and directed.

S&F in repairs long body 15mm bore two-way bib tap, cast copper alloy, chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & directed.

Taking down rain water pipe and eaves gutters (any size and pattern) including all fittings heads shoes bends swan necks etc

S&F 110 mm PVC (SWR ) pipe single socketed in any length with rubber ring joints laid in trenches or in floors all as specified

S&F 110 mm PVC (SWR ) pipe single socketed in any length with rubber ring joints fixed on wall

S&F 75 mm PVC (SWR ) pipe single socketed in any length with rubber ring joint fixed to wall all as specified

S&F 75 mm PVC (SWR ) pipe single socketed in any length with rubber ring joints laid in trenches or in floors all as specified

S&F 110 mm PVC (SWR ) Bend any radius all as specified

S&F 75 mm PVC (SWR ) Bend any radius all as specified

S&F 110 mm PVC (SWR) branch piece, single (single Y ) equal or unequal.

S&F 75 mm PVC (SWR) branch piece, single (single Y ) equal or unequal.

S&F 110 mm (SWR) junction single (Single T) equal or unequal

S&F 75 mm (SWR) junction single (Single T) equal or unequal

M&L PVC(SWR) gully trap 125/110mm, setting and jointing with solvent cement

Taking down chowkhat with shutter (without taking off shutter from the frame) and area exc 1.5 sqm but n.exc 4 sqm each, complete, all as specified & directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) and area not exc 1.5 sqm each, complete, all as specified & directed.

Taking down shutters exc 1.0 sqm but not exc 2.0 sqm each and refixing in same opening etc all as specified and directed.

Supply & fixing Factory made uPVC prelame colour three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 112 x 52mm & sash 42x 68 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi- chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S & F Anodised aluminium powder coated frame work for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F powder coating anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats glazing clips rubber packing, anodised aluminium sanp beading screw , anodised aluminium fittings such as peg stays 150 mm long (01 Nos) hinges type B-21 100 mm long (2 Nos) suitable handles (1 no) complete all as specified.

M & L 4.8 mm thick sheet glass, ordinary quality in squares exc. 0.5 Sqm in each pane

S&F 75x50mm single rebated factory made 100% solid WPC prelem both side (Wood Polymer Composit) door frame from 100% lead free ( Single & extruded process) material with dencity not less then 780kg /Cum all as specified and directed.

S&F Factory made 30 mm thick 100% solid WPC (Wood Polymer Composite) solid both side 14 micron Flush door shutter wit 10mm deep CNC moulding design of required size comprising of virgin PVC resin of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 600 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

S&F 30mm thick factory made solid WPC (Wood plastic composit) moulded glzed door shuter with wire mesh in 08 number of division with brown wood grain texture including SS wire mesh (G-304) 0.36 mm minimum dia of wire and average width of aperature 1.4mm with XPM Aluminium alloy wire cloth of wire shall to be fixed with 15x15 square tube in side rails with screwing 8x28 heat metel zink coated screws can be remove of fix again after changing of wire mesh needed. The density not less then 780kg /Cum shall be as per manufacture instruction complete all as specified and as directed

S&F butt hinges of size 100 mm medium weight, stainless steel ISI marked complete all as specified.

S&F stainless steel handle, 150mm size, 12 mm dia cast type, anodized (ISI marked) complete all as specified.

S&F 200 mm long 12 mm dia stainless steel barrel tower bolts of extruded section (ISI marked) complete all as specified

S&F 300 mm long 16 mm dia stainless steel sliding door bolts, with hasp staple (Bolt type) and fixing clips ofsheet cast or extruded sections and fixing bolts and slinding bolts of extruded sections or cast - aluminium alloy and fixed complete, all as specified.

S&F mild steel helical door spring (Superior quality) 300mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified.

S&F 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as specified and directed

S & F in repair 300mm long Stainless steel six peg hanger chromium plated as approved by engr-in-charge complete all as specified and directed.

Hacking out old broken glass(any thickness, size, quality or description) from wooden/steel frames, glazed with putty or fixed with beads.

S&F 3mm thick figured glass pin head type and glazing with oil putty in square not exc 0.5 sqm in each pane, complete, all as specified.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire, staples all as specified.

S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire, staples all as specified.

M&L for preparation of new surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified.

M&L for preparation of new surfaces of steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of red oxide complete all as specified.

M&L for preparation of old painted surfaces of wood and wood based material of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint all as specified & as directed.

M&L for preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint all as specified & as directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness including cover filltets complete all as specified

S&F Modular kitchen with following items:-(Drg Attached) (a) S&F for base unit boxes 580 mm depth of sides top and bottom made 18 mm HDMR boards laminated on both sides with 0.70, mica on internal sides and 1 mm mm decorative mica on outer visible side. Make :- (Qty as per drg and Site requirement) (b) All as per item no (a) above but 300 mm depth for above platform hanging boxes. (Qty as per drg and Site requirement) (c) S&F innotech Gallery Drawers 84 mm height of depth 500mm with 12mm laminated HDMR base and back panels :- (4 Nos.) (d) All as per item no (c) above but for Drawers 164 mm height :- (10 Nos) (e) S&F soft close hinges :- (29 Sets) (f) S&F stainless steel dish rack or GTPT of size 700 to 800 mm width as required at site. (1 No) (g) S&F PVC cutlery tray :-(01 No)

(h) S&F pump 10 Kg gas pump uplift for shutters (05 Nos) (i) S&F stainless steel Bin holder : 01 No (j) S&F stainless steel detergent holder: 01 No (k) S&F Rubber coated plate attachment fitment: 01 No (l) S&F Rubber coated Saucer attachment fitment: 01 No (m) S&F pantry fittings 600mm pantry with 6+6shelves attachment:- 01 No (n) S&F factory made 18 mm thick HDMR cabinet shutters laminated on front side with 1mm decorative laminated and 0.70mm liner on back side all the edges shall be covered with 2mm thick edge bonding tape and 90 degree edge bent finish including G profile mat finish handle & all necessary fittings complete all as specified and directed. :- 11 SQM (o) All as per item No (n) above but with cutting for glass as in glass shutter incl G profile mat finish handle :- 0.50 SQM (p) S&F bottle pullout 2 self of size 200 mm :- 01 No

M&L for preparation of old surfaces (plastered or unplastered) of ceiling including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of white wash on ceiling complete, all as specified & as directed.

M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of cement base paint, complete, all as specified & as directed.

M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying two coat of oil emulison distemper (OBD), complete, all as specified & as directed.

M&L for preparation of old painted surfaces of wood & wood based material of any description over 10 cm width or girth and applying two coat of synthetic enamel paint, complete all as specified and as directed.

M&L for preparation of old painted surfaces of steel and iron work of any description over 10 cm width or girth and applying two coat of synthetic enamel paint, complete, all as specified and as directed

Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc for taking credit including making good the disturbed surfaces to match with the existing complete.

Material and labour for one light / fan point controlled by one, one way switch 06 Amp wiring with 1.5 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sq mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall etc and making good to the disturbed surfaces to match the existing complete.

All as per serial item No 94 here-in-before but one 3 pin, 06 Amp socket outlet point on independent board controlled by one, one way switch 06 Amp.

All as per serial item No 94 here-in-before but one 3 pin, 06 Amp socket outlet point on same board controlled by one, one way switch 06 Amp.

All as per Serial Item No 94 here-in-before but point wiring with 2.5 Sq mm single core FRLS cables and earth continuity wire of 2.5 Sq mm single core FRLS cable for one 3 pin 16 Amp socket out let point controlled by one, one way switch on independent board complete.

S&F in replacement Switch Modular 6A single pole, one way, 1 module complete.

S&F in replacement Switch Modular 16A single pole, one way, 1 module complete.

S&F in replacement Socket, 6A - 2/3 pin combined 2 module complete.

S&F in replacement Socket 6A/16A - 2/3 pin combined 2 module.

S&F in replacement Modular White cover plate with frame,12 module complete.

S&F in replacement Modular White cover plate with frame,3 module complete.

S&F in replacement Modular White cover plate with frame,2 module complete.

S&F in replacement Modular Metal flush box 12 module complete.

S&F in replacement Modular Metal flush box 3 module complete.

S&F in replacement Modular Metal flush box 2 module complete all as specified and as directed

Supply and fix in replacement LED tube light fittings 1200 mm,20 W higher energy saving decorative ultra slim square profile LED lighting fixture with extruded aluminum housing enviromental friendly, energy efficient complete.

Supply and fix in replacement LED tube light fittings 600 mm, 10 W higher energy saving decorative ultra slim square profile LED lighting fixture with extruded aluminum housing enviromental friendly, energy efficient complete.

Supply & fix LED in replacement wall/surface mounted down lighter, 12 W including electrical connection with PVC three core copper flexible wire & all necessary fixing accessories complete all as specified

Supply and fix in replacement ceiling rose, 6 Amp, 250 volt, AC, ISI marked with three equal size terminals and PVC / Polycarbonate insulated body of 50 x 25 mm size complete.

Material and labour in replacement for sub main wiring with 10 Sq mm nominal cross sectional area, 2 run single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 10 Sq mm nominal cross sectional area, single core runs ( with colour coding), 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete Note : 2 runs of 10 sqmm, 1 run of 10 sqmm earth conductor cable and 1 run of PVC conduit shall be measured as one unit length.

Material and labour in replacement for sub main wiring with 04 sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 04 sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete. Note : 2 runs of 4 sqmm, 1 run of 4 sqmm earth wire and 1 run of PVC conduit shall be measured as one unit length.

Supply and fix AC modular Box 20 Amp with steel enclosure suitable for Geyser & AC protection to human from eletric shock due to direct and Indirect current as well as provide protection from overload and short circuit fault complete with MCB 20Amp after fixing making good surface with fine plastering, finishing and colouring with existing colour matching complete.

Supply and fix in replacement of sheet metal enclosure distribution board triple pole and neutral (VTPN),double door, AC, 440 volt, 08 way with 250 Amp rated copper bus bar and metal door with IP 54 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete. comprising of the following:- (a) MCCB, 63 Amp, 04 pole, AC, 415 Volt of 16 KA breaking capacity (Icu=Ics) complete - 01 No. (b) MCB, SPN, AC, 240 volt of 40 Amp, "C" curve, 10 KA breaking capacity - 12 Nos.

S&F of exhaust fan single phase, 230/240 Volt heavy duty of size 300 mm sweep 1400 RPM including suitable louvers and making connection with suitable size copper flexible wirecable as required

S&F exhaust fans, plastic body, ac, single phase, 230/240 v of size 250 mm sweep with louver and making connection with suitable copper flexible cable as required.

Supply and fixing in replacement LED Bldg security light fitting LED 35 watt with SPD, PF not less or equal 0.9,epoxy coated cover sheet aluminium housing with heat resistant toughtened glass & IP 66 incl with bracket, clamps, nuts, bolts protection complete.

Cutting walls any type, making holes for fixing of exhaust fan of any size or sweep and making good surface with fine plastering, finishing and colouring with existing colour matching complete.

Taking down carefully Geyser of any type and capacity complete with all accessories, dismantling and refixing at same place with new PVC hot series connection pipe after finish of civil work complete.

Gyan Prakash Sharma (BID ID -3448970)

M/s Ramesh Chandra (BID ID -3442812)

M/S KAUSHIK CONSTRUCTION (BID ID -3444137)

m/s raghubar dayal (BID ID -3448649)

QUALITY CONSTRUCTIONS CO (BID ID -3444304)