Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.3 LAccepted-AOC | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹39.7 L+₹4.4 L (12.3%)Rejected-Finance | L2 | Rejected-Finance L2 | |
| 3 | L3₹41.3 L+₹6.0 L (16.9%)Rejected-Finance | L3 | Rejected-Finance L3 | |
| 4 | L4₹41.3 L+₹6.0 L (16.9%)Rejected-Finance | L4 | Rejected-Finance L4 | |
| 5 | L5₹42.0 L+₹6.6 L (18.8%)Rejected-Finance | L5 | Rejected-Finance L5 |
Tender Value
₹49.1 L
EMD Value
₹98,200
Closing Date
20 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer
Garrison Engineer Chandimandir panchkula Haryana 134107
GE/CHM-77/2022-2023 ADDN/ALTN TO BLDG NO P-30 P-319 AND OTHER REVENUE MINOR WORKS UNDER AGE B/R III AT CHANDIMANDIR
2022_MES_566025_1
GE/CHM-77/2022-2023
Open Tender
Civil Works
Item Rate
100 days
Chandimandir
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Garrison Engineer
₹98,200
Yes
31 Jan 2023
29 Nov 2022
27 Dec 2022
29 Nov 2022
20 Dec 2022
13 Dec 2022
Amount
Excavation in trenches not exceeding 1.5m wide and n.exceeding 1.5m deep for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in any type of soil all as specified & directed by Engineer-in-Charge.
Surface excavation to required camber and gradient not exceeding 30 cms deep and averaging 15cms deep and getting out in any type of soil, complete all as specified.
Returning filling in including spreading, levelling, watering and well ramming in layers not exc.25cm thick each layer of soil all as specified.
Removal of excavated material to distance not exceeding 250 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point in soil, complete all as specified and directed.
Cement concrete type D2, 1:4:8 using 40 mm graded stone aggregate, as in foundation, mass concrete etc., complete all as specified and as directed
50mm thick PCC1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base etc, complete all as specified and directed.
75mm thick PCC1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base etc, complete all as specified and directed.
Brick work with sub class ‘B’ bricks old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 complete all as specified & directed.
Non skid ceramic coloured tiles, joint free, first quality, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick screed bed in cement mortar 1:6 including taking down existing tile complete all as specified and directed.
Glazed ceramic tiles coloured tile in vertical surface, straight cut /edge , size 450mm x 300mm x 7mm thick ,joint free, first quality, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 10mm thick rendering in cement mortar 1:4 including taking down existing tile complete all as specified and directed.
Plain cement concrete (1:3:6) type C-1 using 20mm graded crushed stone aggregate as in plinth protections, 75MM thick, finished fair and even without using extra cement, with 10mm wide joints to full depth @ 3m c/c and at corners, filled with mastic mortar, complete all as specified and directed.
Spreading and levelling in layers n exc. 25 cm thick and well ramming including watering as required complete, all as specified.
Hard core of gauge not exc 63 mm deposited spread and lavelled in layers n-exc 15 cm watered & rammed to a true surface with broken stone complete all as specified.
Hard core of broken brick of gauge n.exc. 63mm, deposited, spread and leveled in layers n.exc. 15cm thick, watered and rammed to a true surface complete all as specified & directed.
40mm thick cement concrete type B-0 1:2:4(using 12.5mm graded stone aggregates) as in sub base/base for tiles flooring and including finishing the surfaces even and fair (without using extra cement) complete all as specified.
25mm thick cement concrete type B-0, 1:2:4 (using 12.5mm graded crushed stone aggregate) as in sub base complete all as specified and directed.
15mm thick rendering on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4), inclunding using water proofing compound complete all as specified. Note : WPC shall be measured and paid separately.
10mm thick rendering in Cement and Sand mortar 1:6 over brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed
Two coats of white washing on new wall surfaces including preparation of complete all as specified and directed.
Preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer, complete all as specified and directed.
Preparation of new or previously untreated steel surface of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified
Preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide primer complete all as specified & directed.
Reinforced cement concrete (1:2:4), type B-1, using 20 mm graded crushed stone aggregates, as in beams, lintels over 1.5 metre span and the like complete all as specified and directed (reinforcement shall be measured and paid for separately).
Mild steel high strength deformed TMT bars 10mm dia & over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed.
Mild steel high strength deformed TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified & directed.
Form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for roughly finished flat surfaces of concrete, all as specified.
Factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS squared tube, fixing in opening at site all as specified & directed.
Factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specifiecation & drawing complete all as specified and directed.
Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheeting 0.50 mm thick any colour having tensile strength 550 Mpa as in roof coverings/cladding to wall, fixed with self tapping screws etc, complete all as specified & directed by Engineer-in-charge.
Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, hips , valley gutters, drip and straight flashing(length and girth as fixed), fixed with self tapping screws complete all as specified & directed by Engineer-in-charge.
Rolled mild steel framed work as in doors or gates of angle or other section conforming to Fe 290 (Gde -E-165 quality B) with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering door etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door, fittings and hanging, also fastering and fixing, complete all as specified & directed by Engineer-in-charge.
15mm dia GI tubing, medium grade with all fittings , concealed in walls, ceiling or laid under floors including cutting chases and making good in cement mortar (1:3), complete all as specified and directed.
20mm dia GI tubing, medium grade with all fittings , concealed in walls, ceiling or laid under floors, complete all as specified and directed.
Wash hand basin, vitreous china, flat back, white of size 550 x 400 mm with waste coupling, angle brackets, PVC connection 15mm size, 450mm long, PVC waste pipe complete all as specified and directed.
Vitreous china squatting pan, “Orissa” pattern size 580mm x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe, set with cement concrete, complete all as specified & directed.
PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC long bend, set with concrete and making good to floor, complete all as specified & directed.
15mm bore pillar tap, long body with quarter turn, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed.
Steel ventilator (Box type) factory made with top hung shutter including hold fasts, hinges, steel peg stay, a shop coat of red oxide primer, without glazing bar complete all as specified and directed.
Framed work such as grills, gratings, etc with ends of bars shouldered and / or riverted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, raillings, frame work of water tanks and similar work confirming to Fe-290 grade E-165 complete all as specified & directed by Engineer-in-charge.
3mm thick figured glass pin head type ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.
Stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm including fixed with tinned tacks / stainless steel wire staples, complete all as specified & directed.
500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, including tank nipple, float valve, ball valve 20mm PTMT, complete all as specified and directed.
Bib taps brass, fancy type, Short body with wall flange, standard chromium plated, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, complete all as specified and directed.
Angular stop cock, fancy type, cast copper alloy chromium plated, screwed down, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed.
Stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed.
150mm aluminum anodized barrel tower bolts of extruded section, complete all as specified.
Aluminium handles, cast type anodized of size 150 mm, ISI marked, complete all as specified.
100mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified & directed by Engineer-in-charge.
Vitreous China half stall urinal, fixed against wall in cement mortar (1:2), securing urinal with and including 60mm long brass screws, pointing around urinal back in cement, including CP waste coupling, 32mm PVC waste pipe,complete all as specified and directed.
Urinal spreader, of PTMT (Minimum weight 60gms) white , suitable for 15mm bore pipe, complete all as specified and directed.
PVC connection 15mm size with PTMT nuts of length 450mm long as in repairs complete all as specified and directed.
75 mm size butt hinges medium weight cold rolled mild steel complete, all as specified and directed.
PVC (SWR) rain water pipe, 110mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.
110mm bore PVC (SWR) bends any radius fixed in repair complete all as specified and directed.
Precast kerb stone edging, using factory made pre cast kerb stones (M-20 concrete) of size 300 x 100 x 300mm, set and jointed in CM(1:4),complete all as specified and directed.
Excavation in post holes (or similar hole) each in any type of soil, n.exc 0.50 cu m getting out and removing surplus spoil at a distance not exc 50 metre and making good surfaces complete all as specified and directed.
Factory made, precast concrete, machine pressed, interlocking paver block any shape and size, conforming to IS 15658-2006, of 80mm thickness, M-40 Grade, with grey cement and no pigment and including laid over 25mm thick sand cushioning, complete all as specified and directed. Notes: The shape/size / colour of paver blocks shall be as approved by the GE.
Factory made, precast concrete, machine pressed, interlocking paver block any shape and size, conforming to IS 15658-2006, of 60mm thickness, M-35 Grade, with grey cement and no pigment and including laid over 25mm thick sand cushioning, complete all as specified and directed. Notes: The shape/size / colour of paver blocks shall be as approved by the GE.
Plain cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in foundation, post, filling and mass concrete complete all as specified & directed.
Plain cement concrete type B-1 (1:2:4) using 20mm graded crushed stone aggregate as in seismic and other similar bands, shelves, copings, bed plates, hold fast, plinth courses and the like finished fair & even, including necessary formwork complete all as specified.
Steel work in tubular trusses and tubular posts including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 t complete all as specified & directed by Engineer-in-Charge
Cutting holes in to brick wall built in cement mortar for inserting hold fast etc the embedded portion exceeding half brick but n.exc one brick and making good to the disturbed portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 using 20mm stone aggregate complete all as specified and directed.
Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness (below or above ground) complete all as specified.
Coloured vitrified ceramic tiles 8-10mm thick (square / rectangular) polished, area of each tiles n.exc 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over a 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed
All as per serial item No 65 herein before but in skirting etc over and including 10mm thick rendering in cement mortar 1:4
Coloured vitrified ceramic tiles 10mm thick (square / rectangular) polished, area of each tiles exc 0.42 sqm but n.exc 1.00 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over a 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed
All as per serial item No 67 herein before but in skirting etc over and including 10mm thick rendering in cement mortar 1:4
Double charged coloured vitrified ceramic tiles 800mm x800mm x10mm thick polished, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over a 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed
Glazed ceramic tiles, coloured in vertical surface 300mmx450mmx 7mm thick, joint free, first quality, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over 10mm thick rendering in cement mortar 1:4, complete all as specified and directed.
Granite stone slabs, 16 to 18mm thick, width and length as per site requirement, best quality machine cut and polished to be fixed in floors,cooking plateform, tread, raiser of steps and vertical surfaces etc and jointed with gray cement slurry and pointed in white cement mixed with marble dust (1:2) with admixture of pigment to match the shade of slab, rubbing, cutting / rounding of edges and corners where required with and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.
Kota Stone Slab flooring, 18 to 20mm thick, minimum size 550 x 550mm, best quality over and including cement screed bed 15mm thick in cement mortar 1:6, laid and jointed with grey cement slurry and pointed with grey cement mixed with pigment to match the shade of the slab, inclduing rubbing and mirror polishing complete all as specified and directed.
Material and labour 18 to 20mm thick baroda green marble stone slabs, width and length as per site requirement, best quality machine cut and polished to be fixed in floors,cooking plateform, tread, raiser of steps and vertical surfaces etc and jointed with gray cement slurry and pointed in white cement mixed with marble dust (1:2) with admixture of pigment to match the shade of slab, rubbing, cutting / rounding of edges and corners where required with and including 15 mm thick screed bed in cement mortar 1:4 including dismantling of existing damaged slab complete all as specified and directed.
Taking down chowkats or frame exc. 1.5 sqm and n exc 4 Sqm with shutters (without taking off shutters from the frame) complete all as specified and directed.
Powder coated aluminum sections as in frames/ shutter of doors/window/ventilators /partitions, (Openable/Sliding three track) including joinging cleats, glazing clips, rubber neoprene beading, powder coated aluminim snap beading, screws etc. complete all as specified and directed Note : (i) Minimum thickness of power coating shall not be less than 50 micron. (ii) Weight of aluminum section only shall be measuerd and paid. (iii) Aluminum doors/windows /ventilators to be fixed to jambs with chromium plated screws . (iv) The rate shall be inclusive of neoprene beadings, snap beading, screws, locking arrangement and rollers in case of sliding shutters etc. Weight of fitting fixtures will bot be measured for arriving the weight of aluminum section. (v) Glass /wooden panel/ACP sheet shall be measured and paid separately under respective items. (vi) Design as directed by Engineer in charge.
5.00mm thick ordinary quality tinted glass, fixed to aluminum frame work in panels exc 0.5 Sqm in each pane including standard anodized aluminum beading , neoprene beading, aluminium scres, cleats, clips etc, complete all as specified & directed.
3mm thick aluminium composite panel sheet (ACP) colour as approved by Engr In Charge all as specified and directed.
Preparation of new surfaces of any description of wall etc and applying two coats of oil bound distemper over one coat of interior wall primer including wall care putty (average thickness 2mm as required for desired smoothness and leveling of surfaces in two or more layers) and sand papering for making the surfaces even and smooth complete all as specified and directed.
Preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer, complete all as specified & directed.
Factory made chequered cement concrete tiles 250mm x 250mm x 25mm thick (with grey cement and pigments), set, jointed and pointed in neat cement slurry with grey cement with pigment to match the colour of tiles, laid over 20mm thick screed bed in cement mortar 1:4,complete all as specified and directed.
Door closer hydraulically regulated of aluminium extruded section, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 80 kg, complete all as specified and directed.
200mm 'D' type fancy powder coated aluminum powder coated handle complete all as specified and directed.
200mm aluminum anodized barrel tower bolts of extruded section, complete all as specified.
Aluminium handles, cast type anodized of size 150 mm, ISI marked, complete all as specified.
Aluminium alloy, anodized, sliding door bolts with hasp staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium, 250 mm long and dia of rod not less than 16 mm, ISI marked, complete all as specified.
Butt hinges, cold rolled steel medium weight 100mm long, fixed to wooden/steel chowkhats ,complete all as specified & directed.
12mmthick toughened glass sheet glass fixed to aluminum frame work with and including standard anodized aluminum bead, rubber packing, aluminum screws etc, in panels exc 0.5 Square metre in each pane, complete all as specified and directed.
Standard GI snap grid of size 605mm x 605mm frame work for false ceiling with main tee 32 x 24 x 1mm thick cross tee 26 x 24x 1mm thick and wall angle 24 x 24x 1mm thick having flange powder coating and covered with PVC thin sheet same to placed in grid by means of ceiling and grid to be tied properly / suitabely by GI strip / GI wire in truss / ridge / purlin complete all as specified and directed. Note : ceiling board shall be measured and paid as supply only.
Supply only prelaminated particle board 7mm thick of size 600 x 600mm, interior grade, preliaminated one side with decorative choice lamination and other side balancing white liamination, fixed with staples as in snap grid complete all as specified and directed.
Point wiring with approved colour code multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade, two run of single core cable for phase & neutral and one run of single core multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade for earth continuity conductor to common earth and connected to earth dolly in existing conduit terminated on and including new modular sunken box and suitable size of frame, cover for mounting switch, socket and regulator fixed on surface flush with wall , comprising of One light /bell/buzzer point controlled by one switch or one fan point controlled by one switch &fan regulator, complete all as specified and directed. Note : (i) Unit rate is inclusive of making good the disturbed surfaces by provding by wall putty/POP after mason work and finshing to match the original surface and nothing extra shall be paid on this account. (ii)Unit rate is inclusive of cutting chases in wall /foor/PCC for sunken box and making good the disturbed surfaces to match the original and nothing extra shall be paid on this account.
All as per serial item 90 herein before but for socket outlet 3 pin 5 Amps on same board complete all as specified and directed
Switch piano, flush type, 6 amps, 230 volts, single pole, one way (ISI marked) complete all as directed by Engineer-in-charge
Sockets outlet multipurpose 2 in 1 pin, 6 Amps flush type ISI marked all as specified and directed by Engineer-in-charge
Ceiling rose, PVC or polycarbonate of size 65mmx50mm three terminals (ISI marked) all as specified and directed by Engineer-in-charge.
LED CRCA batten with decorative end cap complete with retrofit T8 Polycarbonate / Glass Tube 20 watts capacity 4 feet long and white light and including connections from ceiling rose complete all as specified and directed.
LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size fixed as in repair complete all as specified and directed.
MCB DB, with provision for incoming 2 pole (MCB / Isolator ) and single phase outgoing, suitable for surface and flush mounting, IP 43 protection, of metal 4 way all as specified and dircted.
MCB ,SPN, 240 volt, 32 Amps, 10 KA , 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and directed
MCB ,SP , 240 volt, 6Amps to 32Amps, 10 KA , 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and directed
Supply, laying & fixing along the poles/walls or passing through pipes or laid in trenches under floor or through walls etc jointing and testing LT Cross Linked Polythene Insulated (XLPE insulated) galvanized steel strip armoured electric cable, 1100 volt grade heavy duty with aluminium conductor overall served with an outer sheath of PVC complete of size 10 Sqmm 3 Core all as specified & directed by Engineer-in-charge. (Note:- Excavation, earthwork, Sand Cushioning, Cable covers, Pipe for cable protection to be measured and paid for separately).
32mm outer dia, double walled corrugated (DWC) HDPE duct pipe conforming to IS 14930 Part-II with anti rodent and non flame propogating properties of approved colour with fittings for cable protection from approval make complete , all as specified and directed
MS GURENDER SINGH
M/S CHOPRA & COMPANY
CHADHA ENGINEERS
B S FURNITURE
ashu enterprises
M/S Trilok chand sharma
Anil jindal and sons
dhiraaj construction company
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .