Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.0 LAccepted-AOC PLOT NO 81 SHANTAJI COLONY JANKI NAGAR JABALPUR MP PIN 482002 | JABALPUR | MADHYA PRADESH | 482002 | L1 | Accepted-AOC Lowest amount quoted | |
| 2 | L2₹38.7 L+₹20,415 (0.53%)Rejected-Finance 292 GROUND FLOOR D BLOCK SAI DHAM RAJ CITY LONI BANTHLA GHAZIABAD GHAZIABAD UTTAR PRADESH 201102 | GHAZIABAD | UTTAR PRADESH | 201102 | L2 | Rejected-Finance Highest amount quoted |
Tender Value
₹46.3 L
EMD Value
₹92,700
Closing Date
12 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri Justin O A, AE (Civ)
Garrison Engineer (East), Near COD Estate, Ranjhi, Jabalpur (MP)-482011
PROVN AND CONVERSION OF OVERHEAD ELECTRIC LINES WITH LT UG CABLES INSIDE PERIMETER AT AMN SUB DEPOT OF COD AND OTHER SANCTIONED WORKS OF 506 ABW UNDER AGE (E/M) OF GE (EAST) JABALPUR
2023_MES_617086_1
8565/E8
Open Tender
Electrical and Maintenance Works
Item Rate
240 days
Garrison Engineer (East) Jabalpur
D b (i)
8 documents required · 8 mandatory
₹500
Garrison Engineer (East) Jabalpur
₹92,700
Yes
14 May 2024
7 Sept 2023
16 Oct 2023
7 Sept 2023
12 Oct 2023
22 Sept 2023
7 Sept 2023 - 12 Sept 2023
Amount
Dismantling of ACSR/AAC conductor of any size from LT poles or distribution span, GI earthing wire etc complete all as specified and directed.
Dismantling of MS channel or angle sections, insulators any type and size, brackets, clamps, nut, bolts, washers, GI earthing wire of any size from LT poles or distribution span etc complete all as specified and directed.
M&L for excavation in trenches for laying of cable, poles and stay in any type of soil n.exc 1.5 mtr wide and n.exc 1.5 mtr deep and getting out in any type of soil complete all as specified ad dirtected.
M&L for returning & filling in including spreading and leveling, watering and well ramming in layers n.exc 25 cm complete all as specified and directed.
M&L for unwashed sand cushoining to under ground cable provided with a layer of 8 cm deep before laying and 15 cm covering above the top edge of cable after laying complete all as specified and directed.
M&L for removing excavated material n.exc 50 mtr and depositing were directed complete all as specified and directed.
M&L for fly Ash bricks sub class 'B' locally available laid flat in trenches over sand cushoining for cable protection complete all as specified and directed.
Demolition of cement concrete unreinforced in ground floor and pavings n.exc 15 cm thickness(below or above ground level) complete all as specified and directed.
M&L for PCC 1:2:4 type B-2 using 40 mm graded crushed stone aggregate as in filling in surface channels and drains etc complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 using 20 mm graded crushed stone aggregate as in coping of pole etc including form work & finishing the surfaces even & smoothe without using extra cement complete all as specified and directed.
M&L for crossing hole under road/hard standing for passing cable through GI pipe including GI pipe light grade 32 mm with all fitting complete all as specified and directed.
M&L for crossing hole under road/hard standing for passing cable through GI pipe including GI pipe light grade 40 mm with all fitting complete all as specified and directed.
M&L for crossing hole under road/hard standing for passing cable through GI pipe including GI pipe light grade 50 mm with all fitting complete all as specified and directed.
M&L for crossing hole under road/hard standing for passing cable through GI pipe including GI pipe light grade 80 mm with all fitting complete all as specified and directed.
S&F XLPE insulated armoured and PVC sheated heavy duty electric cable with aluminium conductor 1100 Volt grade laid in tranches passing through pipes/ducts including tenstion complete of following cross sectional area and size complete all as specified and directed . Note - Rate is inclusive of cable gland & cable lugs:-
4 Sqmm x 3 Core
10 Sqmm x 2 Core
16 Sqmm x 4 Core
25 Sqmm x 4 Core
35 Sqmm x 3.5 Core
50 Sqmm x 3.5 Core
70 Sqmm x 3.5 Core
95 Sqmm x 3.5 Core
Supply, install and testing Digital time switch including 3 phase power contractor 40 Amps in existing LT panel boxes with wire connection with nut bolts, washers etc complete all as specified and directed. Make - Legrand Cat Part No 412641 & 3 phase contactor 40 A, Code No 412549, Havells, L&T
M&L for sub main wiring alongwith earth wire and including with approved colour as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 2.50 Sqmm nominal area and drawing into suitable size of PVC non metalic rigid heavy duty PVC conduit of white/ivory colour and its accessories ISI mark heavy duty of suitable size including one run of PVC insulated with 2.50 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and directed. Note - Tow runs (with Red/Yellow/Blue colour for Phase + Black colour for neutral) of 2.50 Sqmm cable, one run (with Green colour for Earth) of 2.50 Sqmm cable and one run of PVC conduit shall be measured as one unit.
S&F junction box CRCA sheet as required at site with necessry clamps nuts, bolts and washers with 200 Amps rated aluminium bus bar with MCB single pole 20 to 32 Amps complete with necessary fitting arrangements on steel tubular ples complete all as specified and directed.
S&F LED street/security light fitting 60 watt 230 volt, AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP65/66 protection complete including taking down old unserviceable light fitting any type comlete all as specified and directed.
Supply laying jointing, threading 20 mm bore GI tubing medium grade laid in trenches with socket joint together with and including all fittings (such as bend, elbow, tees, short pices connector, caps, plug and union etc) by cutting welding etc complete all as specified and directed. Make:- JINDAL/TATA/PRAKASH.
Supply laying jointing, threading 25 mm bore GI tubing medium grade laid in trenches with socket joint together with and including all fittings (such as bend, elbow, tees, short pices connector, caps, plug and union etc) by cutting welding etc complete all as specified and directed. Make:- JINDAL/TATA/PRAKASH.
M&L for cutting existing steel tubing of 25/32 mm pipe for alterations or additions(each cut measured) complete all as specified ad dirtected.
M&L for cutting existing steel tubing of 40/50 mm pipe for alterations or additions(each cut measured) complete all as specified ad dirtected.
M&L for gun metal globe or gate valve 20 mm bore with iron wheel head screwed both ends for pipe line and fixing complete all as specified.
M&L for gun metal globe or gate valve 25 mm bore with iron wheel head screwed both ends for pipe line and fixing complete all as specified.
(a) INCOMING
(I) Thermal magnetic and microprocessor release MCCB 250 Amps, 4 pole, 50 KA, with front operated locking device- 01 Nos. Make-Legrand cat part No 420379 or equivalent of Havells,L&T
(b) OUTGOING
(i) Thermal magnetic MCCB 160 Amps, 4 pole, 415 V, 16 KA, Qty-02 Nos. Make-Legrand cat part No 420017 or equivalent of Havells, L&T
(ii) Thermal magnetic MCCB 25 Amps, 4 pole, 415 V, 16 KA, Qty-03 Nos. Make-Legrand cat part No 420011 or equivalent of Havells, L&T
(iii) MCB 32 Amps, 2 pole, Qty-01 Nos. Make-Legrand cat part No 408617 or equivalent of Havells, L&T
(c) Digital time switch including 3 phase power contactor 40 Amps. Make-Legrand cat part No 412641 & 3 phase contactor 40 Amps, make Legrand cat part No 412549 or equivalent of Havells, L&T
(iii) Indicator Lamp - R - Y - B (set of three).
(iv) Frequency meter 40-55 Hz - 01 Nos.
Supply, installation, commissioning and testing CPRI approved factory fabricated, floor mounted outdoor type LT feeder pillar box of suitable size fabricated out of 3.15 mm thick CRCA sheet and angle iron 50 x 50 x 6 mm frame and 750 mm above the normal ground level complete factory made totally enclosed dust and vermin proof double door both side hinge opening arrangement on front and back with locking arrangement cable entry and exist from botton with cable glands and gaskets, aluminium bus bar 250 Amps rating (01 Set) fixed on procelain insulator with internal wiring with suitable size of aluminium strips to be used for incoming and outgoing connection of all switches/MCCB's and Bus bar. Bus bar shall be insulated with colour code sleeves/tapes and to be connected with copper lugs, including two coats of synthetic enameled paint on the surface ecternally and internally over a coat of red oxide primer paint including necessary PCC 1:3:6 type C-2 as in foundation complete all as specified and directed comprising of the following :-
(a) INCOMING
(I) Thermal magnetic and microprocessor release MCCB 125 Amps, 4 pole, 36 KA, with front operated locking device- 01 Nos. Make-Legrand cat part No 420096 or equivalent of Havells,L&T
(b) OUTGOING
(i) Thermal magnetic MCCB 63 Amps, 4 pole, 415 V, 16 KA, Qty-02 Nos. Make-Legrand cat part No 420013 or equivalent of Havells, L&T
(ii) MCB 32 Amps, 2 pole, Qty-01 Nos. Make-Legrand cat part No 408617 or equivalent of Havells, L&T
(c) Digital time switch including 3 phase power contactor 40 Amps. Make-Legrand cat part No 412641 & 3 phase contactor 40 Amps, make Legrand cat part No 412549 or equivalent of Havells, L&T
(iii) Indicator Lamp - R - Y - B (set of three) - 01 Nos
(iv) Frequency meter 40-55 Hz - 01 Nos.
S&F MCB Triple pole 415 Volts, 20 Amps 25 KA complete all as specified ad dirtected. Make : Havells/Legrand/Philips
M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60 cm x 6mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level connecting to and including GI steel strip 32 x 6 mm by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 40 mm dia medium grade pipe for protection of GI wire to the extent of 7.5 mtrs as earthing lead including charcoal dust and salt packed all around the earth plate in the earth pit all as per Electrical plate No 3 of SSR Part-I (2009) including PCC foundation/chamber in mix 1:2:4 type B-1 with angle iron frame CI frame, CI cover with provision of locking arrangement and 20 mm dia light grade GI pipe from top edge of the earth plate upto MS funnel with wire mesh provided inside the concrete earth pit for watering arrangement complete including excavation and earthwork in any type of strata and testing complete including fill up the earth pit with soil for best result and removal (for LT panels). Note - Earth protection pipe and earthing strip upto and including 7.5 m length is deemed included in unit rate quoted by the contractor.
M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60 cm x 6mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level connecting to and including GI earth wire of size 4.0 mm by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia medium grade pipe for protection of GI wire to the extent of 7.5 mtrs as earthing lead including charcoal dust and salt packed all around the earth plate in the earth pit all as per Electrical plate No 3 of SSR Part-I (2009) including PCC foundation/chamber in mix 1:2:4 type B-1 with angle iron frame CI frame, CI cover with provision of locking arrangement and 20 mm dia light grade GI pipe from top edge of the earth plate upto MS funnel with wire mesh provided inside the concrete earth pit for watering arrangement complete including excavation and earthwork in any type of strata and testing complete including fill up the earth pit with soil for best result and removal. Make : L&T/HPL/Scheinder confirming to IS-16444. Note - Earth protection pipe & earthing wire upto and including 7.5 m length is deemed included in unit rate quoted by the contractor.
M&L for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or burried in ground and laid down through 20 mm PVC medium grade conduit complete with fixed to poles or any other indicated situation for loop earthing etc as required 4 mm dia galvanised iron or steel wire etc complete all as specified and directed.
Install, testing and commissioning of heavy duty industrial air cooler, single phase, 230 Volt, power capacity 490 Watt with 3 variable speeds on movable stand, comprising of the following :- (i) Cooler shall be fabricated with plastic material. The depth of the tank shall not be less than 35 cm. (ii) Axial fan 30 inch single phase 230 Volts heavy duty. Fan speed 950 RPM of air flow not less than 10500 CFM with effective cooling area approx 2500 Sqft and cooling pad size not less than 1100 x 100 x 1150 mm. (iii) Copper wiring, switches, copper cable not less than 3 core of size 2.5 Sqmm, not less than 2.5 RM complete with three pin top 15 Amps and fan regulator with 3 variable speeds to control fan speed and fixed on front faca of cooler. (iv) Heave duty moverable trolly with 4 Nos of wheels, revolving type, suitable for moving to any direction. Make Model No TK09GB of Nuspak or equivalent in Symphony Mavicool/Bajaj
M&L fully Automatic Star Delta Motor starter 1 HP in sheet-steel enclosure type MK-1 .feature (Motor Rating AC-3 Duty, 415V, 50Hz, three -Ph) and Relay Range 11-18 complete all as specified. Make : L&T/SKN/SIEMENS
M&L for brick masonry valve pit of size 60 x 60 x 60 cm (internal dimension) including all excavation PCC work, earth work and disposal of soil to a distance not exc 50 mtr and depositing where directed by Engr-in-Charge including plastering internally and pointing to wall externally as work proceeds including m.s sheet cover 3.15 mm thick and angle iron frame suitable size handle locking arrangement and painting to steel surface complete all as specified and directed.
M&L for brick masonry valve pit of size 45 x 45 x 45 cm (internal dimension) including all excavation PCC work, earth work and disposal of soil to a distance not exc 50 mtr and depositing where directed by Engr-in-Charge including plastering internally and pointing to wall externally as work proceeds including m.s sheet cover 3.15 mm thick and angle iron frame suitable size handle locking arrangement and painting to steel surface complete all as specified and directed.
M&L Mono block Pump motor MB series MBK22 capacity of pump 1 HP, 5 KW, 415 Volts, 3 phase , pump size 50 x 40 mm with head range of 105 to 18 mtr height with discharge capacity of 350 to 200 LPM with provision of rain proof covering with locking arrangement and PCC foundation of appropriate size complete all as specified and directed.
Schedule of credit amount of Rs. 43,732.50 to be deducted during AOC
Goodluck Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .