Annual Maintanance of Submercible Pump, Motor and Hand Pumps From Ward No 01 to 23 In K R Nagar TMC Limit

Annual Maintanance of Submercible Pump, Motor and Hand Pumps From Ward No 01 to 23 In K R Nagar TMC Limit

Rewinding of submergible pumpset with copper winding wires of appropriate guage, as per specifications and / or directions of the departmental officials, including all materials, labour, equipment and...

For all types of submergible pumpsets above 3 HP and upto 5.0 H.P.: P010A

For all types of submergible pumpsets above 9.5 HP and upto 10 H.P.: P010M

Replace the components of submergible pump sets, requiring replacements decided by the departmental officials, with respective make of damaged ones, including all materials, labour, equipments and tes...

The Intermediate piece (IP) with IP leaded bronze brush.

The Oil Seal.: P020C

The Oil Seal.and steel bush.: P020D

The Guide Vane.: P020E

The Impeller (Shell moulded with aluminium and bronze.): P020F

The discharge outlet (DO) bearing DO steel bush DO bearing.: P020G

The steel bearing bush (DO steel bush): P020H

The allen screw: P020I

The pump shaft made out of stainless steel counterless ground with key way (upto 8 stages). Extra for each stage @ Rs.40/-.: P020J

The pump key (stainless steel): P020K

The pump coupling (stainless steel): P020L

The Non Return Valve (NRV) assembly complete with rubber ‘O’ ring.: P020M

The cable guard: P020N

The strainer : P020O

The brass filter : P020P

The Labour Charges for overhauling of the pump set. : P020Q

Replace the components of motor parts of submergible pump sets, items requiring replacements decided by the departmental officials, with respective make of damaged ones, including all materials, labou...

The upper flange: P030G

The lower flange: P030H

upper/ lower housing: P030I

The Lock Ring: P030J

The Carbon Housing: P030K

The Carbon Housing (Thrust bearing block assembly complete with segment bearing pad.: P030L

The Carbon Housing (Top carbond / ferrodo padding).: P030M

The Stud and Nuts: P030N

The Gun Metal bearing, centrifugally cast Aluminium Bronze bearing brush: P030O

The Circlips: P030P

The Motor base with pin: P030Q

The Transportation of pumping machineries: P030R

The Re-errection charges of pumping machineries including overhauling and painting: P030S

The lifting of submergible pumpset from well.: P030T

The Labour charges only for overhauling.: P030U

Labour charges for Lifting of non functioning submersible pump set along with cable and GI pipes (Each length = 6m) ). for 50 mm.: (Vol. No. 05, Page No. 142 Item No.12.24 PWD SR 2023-24)

Labour charges for Lifting of non functioning submersible pump set along with cable and GI pipes (Each length = 6m) ). for 32 mm (Vol. No. 05, Page No. 142 Item No.12.25 PWD SR 2023-24 )

Lifting of struck up submersible pump set. Upto 300 ft (Vol. No. 05, Page No. 142 Item No.12.26 PWD SR 2023-24)

Lifting of struck up submersible pump set. Above 300 ft (Vol. No. 05, Page No. 142 Item No.12.27 PWD SR 2023-24)

Labour charges for Erection of new / repaired submersible pump set along with GI pipes (32mm / 50mm), cable (New submersible pump set if required will be supplied by the department free of cost and re...

Labour charges for lowering additional GI pipes of dia 32 / 50 mm dia including transportation charges (New GI pipe required will be supplied by the department free of cost & released GI pipes should ...

Supply and delivery at site Brand new best make PVC insulated cable of

Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990

with ISI Mark and as per its latest amendments. I.No 13...

Labour charges for lowering additional GI pipes of dia 32 / 50 mm dia including transportation charges (New GI pipe required will be supplied by the department free of cost & released GI pipes should ...

Repair Top Head Assembly of Hand Pumps by removing the top head assembly, replacing the wornout parts such as handle, axle, chain bearings. Reassembling after greasing in position and giving satisfact...

Dismantling India Mark III hand pump from position, releasing plunger rods, valves, piston. Overhauling the components, replace the wornout parts and re-erecting in position etc. with cutting, threadi...

Dismantling India Mark III hand pump from position, releasing GI pipes, rods, pump, cylinder and strainer. Overhauling the components, replace the wornout parts and re-erecting in position etc. with c...

Providing and greasing the chain of hand pump (both India Mark-II and India Mark-III) by removing the top head cover, cleaning wanter tank and head assembly, removing all dirt inside and outside the h...

Labour charges for repairing of existing hand pump (both India Mark II and India Makr III) above the ground level including replacing of worn out parts such as top head, inspection cover, handle, hand...

Labour charges for repairing of existing hand pump (both India Mark II and India Makr III) below the ground level after dismantling the hand pump head assembly, water tank riser assembly, plunger rods...