PROVN OF CANTEEN AND TEA BAR IN ARO, MOSQUITO PROOFING IN MH, ADDN/ALTN OF SEWAGE LINE, BATHROOM CUM TOILET AND SPL REPAIR TO ROOF TREATMENT OF BLDG NO JP-54 AND 55 OF MH UNDER AGE B/R-I AT ALWAR

Amount

Excavation in trenches n.exc 1.5M wide and n.exc 1.5 M in depth for foundation and getting out in soft/loose soil all as specified and directed.

All as per item No 1.00 above but exc 1.5 m depth and n.exc 3 m depth.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc. 25cm deep as in soft/loose soil complete all as specified.

Removing excavated material, n.exc 50M and depositing where directed at a livel n. exc 1.5M above the starting point at the descriation of contractor complete all as specified.

M&L moorum/red bajri filling in floors or pavings, laid in layers n exc 15 cm thick, spread, levelled and rammed including watering all as specified and directed.

M&L plain cement concrete 1:4:8 type D-2 (40 mm graded stone aggregate) as in foundations, filling & mass concrete complete all as specified.

M&L treating the backfill in contact with foundation at the rate of 7.5 litres of Anti termite emulsion per square metre of vertical surface all as specified.

M&L anti termite treatment treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed.

M&L treating the top surface of filled earth at the rate of 5 Litres of Anti termite emulsion per square metre of surface all as specified.

M&L treating the soil under plinth protection at the rate of 5 Litres of Anti termite emullsion per square metre of surface area all as specified.

M&L hard core of broken stone or boulders of gauge n.exc. 63mm deposited spread and levelled in layers n.exc. 15 cm thick watered and rolled/ rammed to a true surface complete all as specified and directed.

M&L form work to sides of concrete foundation, footing, bases of columns, plinth beams and similar work, vertical or to batter rough finish flat surfaces on concrete complete all as specified and directed.

M&L form work to sides and soffit of floor or floor beam, beam hauchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc also splays between floors and beams etc rough finish flat surfaces on concrete complete all as specified and directed.

M&L form work to sides of Pillars, posts, struts piers, columns etc in squarre, rectangular or polygonal, rough finished surfaces of concrete complete all as specified and directed.

M&L use and waste of form work to soffits of suspended slabs such as roof slab, floor slabs, landings and similar work, n.exc 200mm thick flat, rough finished surfaces of cencrete complete all as specified and directed.

M&L form work to edges of concrete flats, treads, breaks in floors, windows cills, concrete railings, floor and roof n.exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide complete all as specifed and directed.

M&L use and waste of form work to sides and soffits of chajjas for fair finished surfaces complete all as specified and directed.

M&L design mix M-25 RCC as in foundation including footing, plinth beam, base for column, etc complete all as specified and directed.

M&L design mix M-25 RCC as in for beams, cantilevers, bressummers and lintels over 1.5m span complete all as specified and directed.

M&L design mix M-25 RCC as in for columns, pillars, piers, posts and struts etc complete all as specified and directed.

M&L design mix M-25 RCC as in for slabs sopported on walls, beams and columns in floors, roofs etc complete all as specified and directed.

M&L design mix as in chajjas etc complete all as specified and as directed.

S&F Mild Steel TMT round bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping end and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L mild steel TMT bar 6 to 8 mm dia and over, cut to length bent to shape reqd, incl, cranking bending spirally for hooping for columns hooking ends and bending with and including MS wire annealed wire not less than 0.9 mm dia.

All as per item No 24.00 above but 5mm dia and over up to & including 10mm dia in stirrups, spacers & binders.

M&L brick work with flyash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

M&L brick work with fly ash bricks {As per IS-13757 (1993) burnt clay fly ash building bricks}, (Old size bricks) straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L rendering 10mm thick on other than fair faces surfaces in cement mortar 1:6 of brick work or concrete surfaces finished even and fair without using extra cement all as specified and as directed.

M&L 15 mm thick rendering on fair faces of brick masonary in cement mortar 1:4 mixed with water proofing compound finished with even and smooth mixed with Liquid Water Proofing admixture complete all as specified and directed. (Note : WPA shall be measured and paid separately under relevant item of this Schedule on supply only).

M&L rendering 5mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified.

All as per item No 30.00 above but 10mm thick in CM 1:4 over ceiling.

M&L preparation of new plastered surfaces of walls and applying two coats of Oil bound distemper over a coat of 1 mm thick wall care putty of approved tint complete all as specified & directed.

M&L preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified.

M&L preparation of newly plastered surface of walls & applying two coats of cement base paint over a coat of primer complete all as specified.

M&L preparation of newly plastered/unplastered surfaces of ceilings & applying three coats of white wash complete all as specified.

M&L writing letters or figures(Block,roman,Italic or Indian letter n.exc 30cm high) complete as directed

Supply only integral water proofing compound.

M&L 100mm thick PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in sub base of flooring, path, hardstanding etc finished surface even and rough complete all as specified and directed.

M&L 25mm thick PCC 1:2:4, type B-0 (using 20mm graded stone aggregate) as in Sub base complete all as specified & directed.

M&L vitrified ceramic tiles 10mm thick (square/ rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and directed.

M&L vitrified ceramic tiles 10mm thick (square/ rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick cement rendering in cement & sand mortar 1:4 complete all as specified and as directed.

M&L coloured non skid ceramic tiles (1st quality) 7 to 8mm thick area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floors etc, laid over and including 15 mm thick screed bed of cement & sand mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L glazed ceramic coloured tiles in vertical surface 450mm x 300mm x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles and over 10mm thick rendering in CM 1:4 complete all as specified & directed.

M&L granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including cutting and polishing types and over screed bed 20 mm thick in CM 1:6 complete.

M&L 50mm thick sand stone slabs in sunshades, chajjas, shelves, cills, landings, cover stones, templates, etc, n.exc 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar 1:4,complete all as specified& directed.

M&L Mild steel angle iron door frame conforming to Fe 410-0 (Gde-E-250 ) incl 12mm dia deformed bars for strengthing at bottom of chowkhats incl cutting floor at bottom to accommodated strengthing bars & making good the floor in PCC 1:2:4 type B-0 to match the existing floor complete all as specified & directed

S&F 35mm thick 2nd class hardwood factory made panelled door shutter(two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. the size of rail and stiles as per IS: 1003 (part-I), kiln seasoned and chemically pressure treated and fixed to chowkats complete all as specified & directed.

S&F 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a); supplied and fitted to chowkats complete all as specified& directed.

M&L preparation of new wooden surfaces over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified & directed

Preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed.

S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified & directed

S&F 300mm helical/rat tail door Spring 300mm size with MS sheet wing pattern including roller plate complete as directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm, single side prelam PVC sheet used and edges will be painted to match with printed to match with prelam sheet, reinforced with MS square tube & fixing in opening including hold fast.

M&L factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified & directed.

S&F factory made solid PVC Moulded door shutter 28 to 30mm thick (Stiles) with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on front face & 2 mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification.

S&F 100mm MS butt hinges medium weight cold rolled mild steel.

S&F 150mm aluminium anodised barrel tower bolts of extruded section.

S&F 150mm extruded aluminium alloy handles , fabricated type, anodised.

S&F anodized aluminium frame and other sections for doors, windows, ventilators, partitions powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) with one or more rebates including joining cleats, rubber beading, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete fastners for fixing etc. complete all as specified & as directed.

S&F anodized aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos), suitable handle (1 No.) complete all as specified & as directed.

S&F anodized aluminium door shutters, aluminium section weighing 0.55 kg/m, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodized aluminum snap beading screws etc complete necessary fittings/fixtures complete all as specified & as directed.

S&F powder coated anodised aluminium grill of approved pattern and colour for windows/ ventilators/ doors complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified & directed.

S&F sheet glass ordinary quality, in square n.exc. 0.5 Sqm each 4.80 mm thick complete as directed.

S&F sheet glass ordinary quality, in squares exc. 0.5 Sqm each 4.80 mm thick complete as directed.

S&F frosted/figured sheet glass, in squares n. exc. 0.5 Sqm each 4.00 mm thick complete as directed.

S&F door closer hydraulically regulated, designation No 3, aluminium (Die cast) body, universal type (ISI marked) complete all as specified & as directed.

Taking down carefully anodized aluminium doors frame including glazed shutters & builder’s hardware complete of any size and any description and refixing in the same opening after carrying out necessary repair & replacement of unserviceable components / hardware to make it fully functional incl making good in existing surface complete all as specified & as directed. Notes :- (i) Quoted rate shall deemed to include supply & fixing of new joining cleat, aluminium beading, glazing clips, rubber packing, stays including cutting of old styles etc & adjusting the same appropriately as directed. (ii) Loose corner joints of frame & shutters shall be tightened by providing suitable cleats made out of aluminium angle of appropriate size fixed with nut & bolts to make the joints at 90º.

M&L 75mm thick cement concrete (1:3:6) type C1 using 20 mm thick graded stone aggregate as in plinth protection laid in alternate bays n exc 2.5m length finished even & fair and joint to be filled with Bituminous mastic filling incl necessary form work complete all as directed.

Preparation of roof top surface, providing and applying heat reflective UV stable single component smart care damp proof ultra is a fibre reinforced elastomeric liquid applied water water proofing membrane formulated with PU hybrid polymers and reinforcing acrylics fibre and having SRI of 106 on top of concrete roof surface in three coats incl self primer at ratio of damp proof and water 3:1 and coverage @ 1 Ltr/10 Sqm with a thickness of 650 micron. Note :- 6 Hrs interval between two coats will be maintain & the work will be carried out through company applicator duly get approved from Accepting officer in writing before incorpotion and paid only after receiving of the warrenty certificate from the company. Make:- Dr Fixit, Asian paint or equivalent as approved by GE.

S&F 15mm bore, steel tubes, galvanised, medium grade with all fittings & fixed complete to wall and ceiling or laid in floors etc all as specified and directed.

S&F 20 mm bore, steel tubes, galvanised, medium grade with all fittings & fixed complete to wall and ceiling or laid in floors etc complete as specified and directed.

S&F Rotational moulded polyethylene water storage tanks of 500 Ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I incl necessary fitting i.e. nipple, socket, union, reducer, tank nipple etc complete all as specified & directed

S&F ball brass valves, high pressure,20mm bore, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in position all as specified

S&F 20mm bore Gun Metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed.

S&F 15mm dia PVC connecting pipe 450mm long with PTMT nuts of suitable size at both ends complete all as specified & as directed.

S&F 15mm bore, stop valve, chromium plated, fancy type, with long shank, and cup (Concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions etc complete.

S&F white vitreous china wash hand basin 'Flat back' of size 550mm x 400mm fixed on and including new brackets CP waste coupling and PVC Waste pipe complete all as directed.

S&F 15mm dia CP pillar tap fancy type cast copper alloy, CP with capstan head, screwed ddown high pressure, with or without lettered 'HOT' or 'COLD' with long screwed shank and fly nuts screwed for iron pipe and fixed complete all as directed.

S&F fancy type long body bib taps, chromium plated alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified & directed.

S&F stop/angle valves,fancy type, chromium plated alloy screwed down high presure, screwed both ends for iron pipe or for unions of 15 mm dia complete all as specified & directed.

S&F 15mm bore 2 way angle valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.

S&F PVC low level flushing cistern 10 litrs capacity (white ISI marked) with inlet ball valve, float and handle, syphonic action type including brackets and flush pipe of polythelene of low or high density of PVC 32mm dia for LLFC complete all as specified.

S&F vitreous china wash down water closet pan (Pedestal pattern), white including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc. & with plastic WC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified & as directed.

S&F kitchen sink without drainage board made out of stainless steel 1mm thick with plugs, washers and waste pipe including bedding in cement mortar to dwarf wall or including and fixing cast iron cantilever brackets and connecting union to pipe over all size 495 x 420mm bowl size 410x330x160mm including flush pipe of polyethylene of low or high density or PVC 32mm bore with long screwed shanks and fly nuts complete all as specified & directed.

S&F swivel shower rose(fancy type) chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed.

S&F Jet spray chromium plated brass for EWC with & including PVC connection 900 mm long suitable for 15 mm bore GI pipe with PTMT nut & nipple complete.

S&F powder coated stainless steel drapery rod of 20 mm inner dia (in lengths as directed) of approved colour with & including decorative bowel at both ends and pair of powder coated mild steel brackets fixed at both ends with PVC rawl plug & steel screws on walls/beam, including PVC curtain rings of matching colour @ 10cm C/C all as specified & as directed.

S&F grating doom 100 mm dia of PTMT (Minimum weight 25 gms) fixed with cement complete all as specified & directed.

S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in floor/fixed to walls complete all as specified & directed.

S&F 110mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in trenches or floors/wall complete all as directed.

S&F PVC (SWR) bends 110mm dia any radius.

S&F PVC (SWR) junction single (Single T) equal or unequal with access door 110mm dia.

S&F PVC (SWR) Reducers 110mm to 75mm

S&F PVC(SWR) Vent cowl 75mm dia.

S&F PVC (SWR) 75mm dia Floor Trap, plain with CP grating including jointing with solvent cement.

M&L 150mm bore reinforced concrete pipe, class NP2, laid and jointed (in CM 1:1) complete with collars all as specified & as directed.

M&L concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in 150mm bore pipe PCC for 1:4:8 type D-2 all as specified & as directed.

Cutting into existing manhole for connecting new drains making good to 150 mm dia pipe and rendering cutting out existing benching for and forming branch chanel (1/2 round or 3/4 section) in cement conc. 1:2:4 type B1 smooth finished jand reforming benching all as specified & as directed.

M&L PCC 1:2:4 type B1 using 20mm graded stone aggragate as in bed blocks, coping etc including weathering slightly rounded or chamfered angles and throating making groves for fixing of man hole cover including necessary form work all as specified & as directed.

Demolition of mud in roofs, any thicknes, including plastering, existing tretement and cleaning (whether full thickness removed or only or part there of) etc in all respect and preparing it for further treatment and taking out and disposal of debris & rubbish to a distance exc 1 Km but not exc 1.5 Km complete all as specified & directed.

M&L PCC 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) as in roof padding, laid to a minimum consolidated thickness of 25 mm as leveling course, laid and compacted in min slope 1:40 over roof complete all as specified & directed.

M&L rendering 15mm thick in CM 1:4 with water proofing compound over green concrete surface(WPC will be measured and paid seperately) surface finished even and smooth (without using extra lime or cement) complete all as specified & directed.

M&L applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning surfaces over bituminious primer complete all as specified & directed.

M&L APP based plymeric membrane minimum weighing 3 Kg/Sqm and minimum 3 mm thick reinforced with polyster non woven fabric (wt not less than 150 gms/sqm) land on primed surface by torch on application complete all as specified.

Demolition of cement concrete (unreinforcement) for Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.

M&L providing precast cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) as in Chajjas, facia, landings, cover slabs, chullah hoods, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:4 incl necessary formwork etc complete all as specified.

Taking down cement plaster any description on brick or stone walls etc.

Demolition of cement concrete (un-reinforced) in ground floor and paving n.exc 15 cm thickness (below or above ground level.) & removal of rubbish material complete all as specified& directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving exc 15 cm thick above ground level & removal of rubbish material all as specified & directed.

M&L 60mm thick machine pressed precast conctete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006, M-35 grade with and including over 25mm thick sand complete all as specified and as directed.

M&L 40mm thick PCC 1:2:4, type B-1 (using 20mm graded stone aggregate) as in flooring complete all as specified & directed.

S&F glass dividing strips, 3 mm thick and 38mm width complete all as specified

Dismanlting of kerb stone including cement bedding & removed off rubble.

M&L precast cement concrete solid block factory made as in kerb stone in PCC 1:2:4 type B-1 using (20 mm graded stone aggregates) set in CM 1:6 (size of precast concrete block complete all as specified & directed.

S&F in repair vitreous china wash down water closet pan (Pedestal pattern), white including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc & with plastic WC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified & as directed.

S&F in repair Vitreous China Squatting pan, Orissa pattern, size 580 x 440mm white with integral foot rests connection to trap and to flushing pipe, etc.complete including making good to floor complete all as specified & directed.

S&F in repair PVC low level flushing cistern 10 litrs capacity (white ISI marked) with inlet ball valve, float and handle, syphonic action type including brackets and flush pipe of polythelene of low or high density of PVC 32mm dia for LLFC complete all as specified.

Demolition of brick/stone masonry built in cement/lime mortar of any mix including all quoins pillar ashlars masonry and removal complete all as specified& directed.

M&L brick work with sub class B bricks, straight or curved on plan to any radius in old type brick thick walls built in CM in 1:4 all as specified & as directed.

M&L walling of random rubble,bedded and solidely hearted Uncoursed built in CM (1:6) complete all as specified and directed.

M&L providing cement concrete 1:2:4 type B-1 concrete, using 20mm graded stone aggregate as in water throughs, surface channels of drains and manhole benching including finishing the top of benching even and smooth using extra cement complete all as directed.

M&L PCC 1:2:4, type B-0, (using 12.5mm graded stone aggregate) in coping complete all as specified.

Cleaning of all blockages of nahani trap/floor trap, bottle trap, gully trap, P or S traps of WCs, 100 mm/75 mm dia CI pipe stacks upto 1st Manhole, CI/SGSW pipe between gully trap & 1st Manhole, CI Tee/Door bends etc to maintain internal sewage system with and including manual/pressure cleaning pump & flexible rods and other necessary equipments complete all as specified and directed.

Cleaning of sewage line of 100mm bore from gully traps, grease traps etc. upto 1.5 m deep by removing all filtn/silt, foreign materials and other deposits whatsoever completely and making the line free from all obstacles and testing the flow of sewer line evenly, smoothly by filling water. The cleaning operation will be carried out in suitable lengths by blocking the first and last manholes of sewage line and removing the silt/sludge & other deposits out side of MD land in covered van/trolley all as specified & directed.

All as per item No 127.00 here-in-before but sewage line of 150 mm bore and depth of sewage line upto 1.50 M.

Cleaning of septic tank of any capacity or description including cleaning and pumping out fluid, cleaning of sludge from compartment of septic tank including intercepting chamber & washing down with water complete and removing the sludge in covered van/trolley out side the MD land, complete, all as directed.

Cleaning of manholes depth upto 1.5 mtr by removing all silt, sludge, any other materials making clean and flushing with water complete incuding removal of spoils out side MD land and taken out cover slab and reset in the same position after cleaning and testing all as specified and directed. cleaning shall be done either manually or mechanically as required and directed.

All as per description item No 130.00 above but depth exceeding 1.5 m and not exc 3 m deep complete all as specified and directed.

Demolition of reinforced cement concrete as in cover/ slab of manhole/septic tank/soakage well all a specified & directed.

S&F 50mm thick steel fibre reinforced (SFRC) manhole cover with iron frames (medium ) complying to the standard specifications as mentioned in the IS 12592 BIS Standard minimum load bearing capacity 3 ton / Sqm in square rectangular or circular shape complete all as specified and directed.

M&L design mix M-25 RCC as in slabs sopported on walls ,beams and columns in floors ,roofs, soak well, septic tank slab etc complete all as specified and directed.

Demolition and breaking up drain pipes 150 mm dia (salt glazed ware AC or reinforcement concrete set in cement mortar.

M&L 150mm reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed.

M&L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate for 150 mm dia bore drain pipe for bed concrete including packing under and hunching against the sides of pipe after they are laid and tested complete all as specified and directed.

M&L loose filling of broken bricks of gauge 80 to 150mm in soakage pits, soakage well complete all as specified and directed.

S&F in repair 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors including dismantling old u/s pipe complete all as specified.

S&F in repair PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed.

S&F in repair PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints fixed to walls/floor complete all as specified & directed.

S&F in repair PVC (SWR) bends any radius 75 mm bore complete all as specified & directed.

S&F in repair PVC (SWR) bends any radius 110 mm bore complete all as specified & directed.

S&F in repairs MS grating CP 100mm dia, with hole for waste pipe of approved make including fixing with CM to floor/nahani traps etc complete all as directed.

S&F in repair PVC (SWR) vent cowl 110mm complete all as specified & directed.

S&F in repair 75mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified & directed.

S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified & directed.

S&F in repair PVC (SWR),110mm junction single, (Single T) equal or unequal complete all as specified & directed.

M&L 40 mm thick DPC to horizontal or vertical surfaces including necessary form work PCC 1:2:4 type B-0 using WPC @ 3 % of cement by weight [Integral WPC should be measured and paid separately).

Cutting openings, in cement mortar through brick/ stone walls for door, window and other openings or enlarging existing openings converting window into door openings, etc or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hardcore, etc to store and rubbish not exc 50m complete all as specified.

Forming jambs, etc to openings (to foregoing item), including cutting, toothing and properly bonding into old work in Cement Mortar (CM 1:4) also facing, jointing, pointing and painting to match existing surface, complete all as spercified

Taking down Chowkatts or frames with shutters ( without taking off shutters from the frame) n.exc 1.5 sqm each & removing to store.

S&F in repair PVC connection pipe, 15mm dia & 600mm long with adopter and washer at both end complete all as specified & directed

S&F in repair Rotational moulded polyethylene water storage tanks of 500 Ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified & directed.

S&F in repair ball valves brass high pressure with polythelene float and fly net complete, screwed , iron pipes 20 mm dia complete all as specified & directed

S&F in repair brass Gun-metal, globe or gate valves 20mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Taking up or down 15mm steel tubing and connections, complete all as specified & directed

Taking up or down 20mm steel tubing and connections, complete all as specified & directed.

S&F in repair fancy type bib taps, chromium plated alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified & directed.

S&F in repair white vitreous china wash hand basin 'Flat back' of size 550x400mm fixed on and including new brackets CP waste coupling and PVC Waste pipe complete all as directed.

S&F in repair 15mm dia CP pillar tap fancy type cast copper alloy, CP with capstan head, screwed ddown high pressure, with or without lettered 'HOT' or 'COLD' with long screwed shank and fly nuts screwed for iron pipe and fixed complete all as directed.

S&F in repair Stop/angle valves,fancy type, chromium plated alloy screwed down high presure, screwed both ends for iron pipe or for unions of 15 mm dia complete all as specified & directed

S&F in repair Stop valves,fancy type, chromium plated alloy screwed down high presure, screwed both ends for iron pipe or for unions of 15 mm dia long sunk concealed type complete all as specified & directed

S&F in repair 15mm bore 2 way angle valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.

S&F in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) alongwith preader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified & directed

S&F in repair brass chromium plated shower rose 125mm size with swivel joint type including fixing to steel pipe of 15mm bore or union complete all as specified.

S&F MS steel work in tubular trusses and tubular posts including special shaped washers etc., complete using but welded. RHS/SHS confirming to IS 4923 : 1997 with one shop coat of zinc chromate primer paint.

S&F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof coverin/cladding t wall fixed with self tapping screwas as specified or fixed with L type or J type hook bolts & washers etc complete all as specified & directed.

M&L 75mm thick PCC 1:4:8, type D-2 (using 40mm graded aggregate) as in sub base of flooring path way etc complete all as specified & directed.

Taking down chowkatts or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but n exc 4 sqm each & removing to store.

M&L point wiring for one light point controlled by one, one way switch with 1.50 Sqmm two single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn into and including PVC casing & caping with accessories fixed on surface of walls/ceiling by means of PVC sleeves/dash fasteners with cadmium plated screws, all as per IS and including wooden boxes fixed on wall with and including 3mm thick phenolic laminated sheet top cover for mounting switches, sockets, fan regulators etc complete all as specified.

All as per serial item No 172.00 here-in-before but for one fan point controlled by one switch and regulator.

All as per serial item No 172.00 here-in-before but for one exhaust fan point controlled by one switch and regulator.

All as per serial item No 172.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on same board.

All as per serial item No 172.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on independent board.

All as per serial item No 172.00 here-in-before but for one 3 pin socket outlet 15/16 Amps controlled by one 15/16 Amps switch on independent board with 2.50 Sqmm two single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour.

S&F switch piano flush type, single pole, one way, 5/6 Amp, 230 Volts complete all as specified and directed.

S&F switch piano flush type, single pole, one way, 15 Amp, 230 Volts complete all as specified and directed.

S&F socket outlet for 3 pin (with 2 pin outlet also), 5/6 Amp, flush type 240 Volt complete all as specified and directed.

S&F socket outlet for 2 in 1, 3 pin 5 & 15 Amp, flush type 240 Volt complete all as specified and directed.

S&F ceiling rose surface bakelite 65 x 50mm two or three terminals complete all as specified and directed.

S&F decorative ultra slim liner LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient suitable for 16 Watt to 20 Watt with LED tube of model E-LITE LED Pride Plus and connecting up with and including three core, PVC insulated, sheathed copper conductore cable of required size and length from ceiling rose to fitting all as specified & directed. Make :- Havells Cat Part No LHEXBHP71NW018 or equivalent of Philips/ Crompton Greaves /Bajaj/Wipro.

S&F sheet metal enclosures, double door type, suitable for fixing MCB SPN with 200 Amps rated bus bar, 8 way, 240 volts complete all as specified and directed.

S&F MCB 32/40 Amps, single pole & neutral, 240 Volts complete all as specified and directed.

S&F MCB 6-40 Amps, single pole, 240 Volts 'C' curve, 10KA ISI marked as per IS/IEC 60898-1 2002 complete all as specified and directed.

S&F 2nd class hard wood rectangular block open recessed of size 30cm x 25cm x 5cm depth with 3mm thick phenolic laminated sheet top cover fixed with suitable steel screws & PVC rawl plug(4 Nos), complete all as specified and directed.

Supply, laying, jointing and testing XLPE insulated, armoured, heavy duty LT underground electric cable with stranded aluminium conductor 1100 volts grade cross sectional area 16 sqmm 2 core laid in trenches, along poles through pipes etc complete all as specified & as directed. (i) Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately including taking down old unserviceable XLPE cable. (ii) Road cutting/floor cutting /cutting holes etc in walls required for laying/fixing of cable etc shall be made good as per existing. Nothing extra shall be admissible on this account. Quoted rates shall be inclusive of the above provisions.

M&L brick work with fly ash bricks {As per IS-13757 (1993) burnt clay fly ash building bricks}, (Old size bricks) with width equal to the length of the brick laid dry & flat abutted with each other with gap between adjacent bricks not exc 10 mm over UG cable for protection complete all as specified & directed.

M&L dry sand (tibba sand) and punning for cushioning to under ground cable all as directed. Note :- For the purpose of payment only punned thickness shall be measured.

M&L 40mm grade GI pipe (light grade) for protection of LT cable fixed to wall /pole /road crossing including clamps complete all as directed.

S&F exhaust fan 300mm sweep 240V AC including provision of hole in wall of suitable size and necessary electric connection complete all as directed. Make : Havells/Crompton/Bajaj/Orient.

S&F ceiling fan 5 star rating 1200mm sweep 240V AC including provision of hook in ceiling of suitable size and necessary electric connection complete all as directed. Make : Havells/Crompton/ Bajaj/ Orient.

M&L earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to and including galvanized iron earth wire 4 mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part-I and connection to main switch board/Test point/panel/ equipment and testing on including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to a distance not exc 50 metre, charcoal and salt in alternate layer 15 cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering and 15 mm bore 3.00 metre long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25 mm x 3mm, bolts, nuts and washers, PCC chamber (1:3:6) type C1, 40mm thick precast RCC cover 1:2:4 type B1 shall be provided on CI frame etc complete all as specified & as directed.

M/S Naglot Enterprises

Hitesh Construction

M/S JINDAL ENTERPRISES

M/s S Amarjit Singh