Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.5 LAccepted-AOC | L1 | Accepted-AOC Lowest rate quoted. | |
| 2 | L2₹41.9 L+₹4.0 L (10.5%)Rejected-AOC | L2 | Rejected-AOC Higher rate quoted than L1 | |
| 3 | L3₹42.2 L+₹4.3 L (11.5%)Rejected-AOC | L3 | Rejected-AOC Higher rate quoted than L1 | |
| 4 | L4₹43.9 L+₹6.0 L (15.8%)Rejected-AOC SOUTH CANEL PAR PO PANAGARH BAZAR DISTT PASCHIM BARDWAN WB PIN 713148 | PANAGARH BAZAR | PASCHIM BARDWAN | WEST BENGAL | 713148 | L4 | Rejected-AOC Higher rate quoted than L1 | |
| 5 | L5₹44.6 L+₹6.7 L (17.7%)Rejected-AOC | L5 | Rejected-AOC Higher rate quoted than L1 |
Tender Value
₹45.0 L
EMD Value
₹90,100
Closing Date
14 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PANAGARH
GARRISON ENGINEER PANAGARH, MILITARY ENGINEER SERVICES, PO-PANAGARH, DIST-BURDWAN, WEST BENGAL, PIN-713420
All as per BOQ
2022_MES_559531_2
8400-870/E8
Open Tender
Civil Works
Works
210 days
PANAGARH
Class D and Category a (i) (Building)
6 documents required · 6 mandatory
₹500
GE PANAGARH
₹90,100
Yes
6 Feb 2023
24 Nov 2022
15 Dec 2022
24 Nov 2022
14 Dec 2022
1 Dec 2022
Amount
Demolition of brick work built in cement mortar and removing rubbish off from the premises complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and paving n. exc 15 cm thickness below or above GL and removing rubbish off from the premises complete all as specified and directed.
Taking down cement plaster of any description on concrete surfaces such as soffit of RCC slab, chajjas and brick walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing rubbish off from the premises complete all as specified and directed.
M&L for rendering 15 mm thick cement plaster in CM 1:6 on brick work or concrete surfaces including finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15 mm thick cement plaster in CM (1:4) on brick work or concrete surfaces including finished even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of new plaster surfaces of wall/ceiling and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gM&Litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces, complete all as specified & directed. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar).
Dismantling wrought Iron or mild steel work of any description not otherwise provided for complete all as specified and directed
S&F framed work such as grill gratings etc.. with end of bars shouldered and or riveted, or forged into spikes; framed guard bars; b arred iron door; ladders; frames balusters; walk ways; railings; framedwork of water tanks and similar work conforming to Fe-290. Gde-E-165 complete all as specified and directed by engr-in-charge.
S&F wind ties for roof including securing bolts, flat iron fillets (for securing weather boarding with screw bolts and nuts) including all necessary drilling,bolting or riveting, etc and similar work conforming to Fe 290 Grade E-165 including painted with one soap coat of zinc chromate primer paint complete all as specified and directed. (including preparation of surface at contractor's workshop before fabrication)
Dismantling of wall or ceilling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, of any thickness including cover fillets complete all as specified and directed
S&F aluminium Anodised snap grid frame work size of grid 605 x 605 mm for false ceiling complete all as specified and directed by Engr-in-cgarge.
S&F hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified and directed.
M&L Non asbestos 6mm thick designer fibre cement building boards fixed or laid/inserted to timber/GI/Aluminium framework with screws as per manufacture instruction all as specified and directed by Enger in Charge.
M&L for complete removal of existing treatment, preparation of surfaces of wall/ceiling and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gM&Litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over surfaces, complete all as specified & directed. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar).
M&L for PCC(1:2:4) type B-0 (using 20mm graded stone aggregate) as in roof kerbs or mud stop rounded complete all as specified and directed
Dismaltaling of AC corrugated,samecorrugated sheets in roof covering complete all as specified and directed
S&F pre-painted galvalume aluminium zinc coating @ 150 GSM GI based corrugated steel sheet 0.5mm of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating @ 150GSM GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed
Demolition and breaking up drain pipes of any description set in cement mortar (internal dia of pipe upto 110 mm) dia, complete all as specifed and directed by the Engr-in-Charge.
S&F PVC (SWR) pipes 75 mm bore single socketed, in any length with rubber ring joint, laid in trenches or in floors complete all as specified and directed.
S&F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specifed and directed.
S&F 75mm PVC (SWR) bends any radius with access door complete all as specifed and directed
S&F 110mm PVC (SWR) bends any radius with access door complete all as specifed and directed
S&F 75mm PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specifed and directed
Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 15 mm dia bore complete all as specifed and directed.
S&F 20mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings in trenches complete all as specifed and directed
Taking up or down steel tubing of 20 mm dia and removal to store complete all as specifed and directed.
S&F GI tubing 20 mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specifed and directed.
M&L for 75 mm thick PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) finishing surfaces even and smooth without using extra cement, as in plinth protection and paving complete all as specifed and directed.
M&L for hardcore of broken stone gauge n.exc. 63 mm, deposited, spread and levelled in layers n.exc.15cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for providing 40 mm thick PCC 1:2:4 Type B-1 (using 20 mm graded stone aggregate) as in flooring including finishing the cement concrete surface even and smooth with using extra cement complete all as specified and directed.
Supplied only glass dividing strips, 3 mm thick, 38mm in width of strip complete all as specified and directed.
M&L for mild steel TMT bars 10 mm dia and over, cut to length, bend to shape required including cranking, bending spirally for hopping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified and directed
All as per item No 33.00 mentioned here-in-above but 6mm to 8 mm complete all as specified and directed.
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store yard and rubbish off the premises complete all as specified and directed.
M&L for coloured non skid ceramic tiles (joint free) 7 to 8 mm thick (Square/Rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm, in skirting or dado, etc set and jointed in neat cement slurry and including 15mm thick rendering in cement mortar (1:4) and pointed in white or coloured cement to match all as specified and directed. (Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-charge).
M&L for vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles n.exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchand jointed in neat cement slurry all as specified as directed. (Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-charge).
M&L for 15 mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor finishes complete all as specified and directed.
M&L for glazed ceramic tiles in vertical surfaces 350x250x7mm/ 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick cement plaster in CM (1:3) on brick or concrete surfaces complete all as specified and directed.
Taking down chowkat or frame with shutters n.exc 1.5 Sqm each (without taking off shutter from the frame) complete all as specified and directed.
Taking down chowkat exe 1.50 sqm and n.exc 4 sqm (without taking off shutter from the frame) each complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be convered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitabale PVC sheet beading, and jointed together with solvant cement, and S&F in the frame at side as per specification and drawing complete all as specified and directed.
S&F solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified and directed.
S&F 100 mm size butt hinges extruded aluminium alloy with galavanised mild steel hing pin anodised and fixed type C21 complete all as specified and directed
S&F 150 mm long Aluminium, anodised, barrel tower bolt of extruded section complete all as specified and directed.
S&F aluminium handles, cast type, anodised 150mm long complete all as specified and directed.
M&L for preparation of new steel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.
S&F 3mm thick figured glass pin headed type and glazing with oil putty in square n.exc. 0.50 sqm each pane complete all as specified and directed.
Cutting chases, pinning in making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good, cutting n. exc. 10cm girth complete all as specified and directed.
S&F PVC waste pipe 32mm dia for wash basin and sink 01 meter long complete all as specified and directed
S&F in repair soap dish, vitreous china white, approximate size 160 x 160 x 90 mm, fixed to plugs with chromium plated brass screws complete all as specified and directed
S&F in repair toilet paper holder, vitreous china box type fixed to wall with chromium placed brass screws complete all as specified and directed.
S&F in repair PVC connection 15mm size PTMT nuts of length 600mm complete all as specified and directed.
S&F grating square 150mm size of PTMT (minimum weight 100 gms) complete all as specified and directed.
S&F in repair 15 mm bore stop valve cast copper alloy fancy type, chromium plated with long sunk and cup, screwed down, high pressure, with crutch or but-ter fly handle, screwed both ends for iron pipe or for unions (concealed type) complete all as specified and directed.
S&F in repair 10 litre capacity PVC valveless, syphonic action type low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete (With brackets) all as specified and directed.
S&F bib taps cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule.
S&F in repair Vitreous china Water closet (padestal pattern) complete including provision of lime concrete bedding white, including plastic WC seat cover, closed pattern with flat bottom and mild steel CP hinging device and including connection to GI pipe line complete all as specified and directed.
S&F 15mm bore pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts complete all as specified and directed.
S&F in repair chromium plated shower rose with without swivel joints, 125mm size including fixing to steel pipe or union complete all as specified and directed.
Supply flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern complete all as specified and directed.
S&F in repair tubular towel rail brass chromium plated 20mm dia, 'D' type, 60cm long between flanges and including brackets complete all as specified and directed
S&F in repair 15mm bore Brass CP Mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.
S&F powder coating anodised aluminium window and ventilator shutters side hung/sliding type without sash, (minimum thickness of powder coating 50 micron), aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, anodised aluminum snap beading screws, anodised aluminium fittings such as peg stays 150mm long (1 nos) hinges type B-21 100mm long (2 nos) suitable handle (1 nos) complete all as specified and directed.
S&F Powder Coating Anodised aluminium door shutters (minimum thickness of powder coating 50 micron), aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handle 2 Nos in each door, hinges, anodised aluminiumsnap beading screws etc. complete all as specified and directed by engr in charge.
S&F Powder Coating Anodised aluminium frame (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified
S&F door closer aluminium body, hydraulically regulated, designation No. 2, universal type, suitable for door shutters and weight between 61 to 80 kg and fixed complete all as specified and directed by Engr-in-Charge.
S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engr-in-Charge.
S&F floor door stopper 140 mm of aluminium alloy body with rubber shoe and tongue, anodised, with hard drawn steel spring and fixed complete all as specified and directed by Engr-in-Charge.
S&F mortice lock verticle type 100 mm 4 lever brass fixed in aluminum door complete all as specified and directed by Engr-in-Charge.
M&L for 5.5 mm thick froested Sheet glass, ordinary quality and glazing with brass screws in square exc 0.5 sqm in each pane complete all as specified as directed
M&L for pre-laminated 9 mm thick particle board interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work or fixed in ceiling complete all as specified and directed.
Excavating in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sq m on plan and n.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm in soft/loose soil complete all as specified and directed.
M&L for removing excavated material exc. 250m but n.exc 500m and depositing where directed complete all as specified and directed.
M&L for moorum/red bajri filling in floors or pavings, laid in layers n.exc.15 cm thick, spread, levelled and rammed including watering as required complete all as specified and directed.
M&L for providing plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation and mass concrete complete all as specified and directed.
M&L for RCC 1:1.5:3, type A-01, Nominal Mix, (using 20mm graded stone aggregate) as in, footings, foundation rafts ,foundation beams, plinth beams , bases of columns etc, basement slabs, under-reamed piles and mass concrete complete all as specified and directed..
M&L for RCC 1:1.5:3, type A-01, Nominal Mix (using 20mm graded stone aggregate) as in, Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
M&L for RCC 1:1.5:3, type A-01, Nominal Mix, (using 20mm graded stone aggregate) as in, columns, pillars, piers, posts and struts etc, complete all as specified and directed..
M&L for formwork to sides of concrete, foundations, footings, bases of columns, rafts and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work for fair finished surface complete all as specified and directed.
M&L for formwork to soffits of suspended slabs such as roof slabs, floors slabs, landings and similar work n.exc 200mm thick (horizontal or sloping) for fair finished surface complete all as specified and directed.
M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions etc. for fair finished surface complete all as specified and directed.
M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete raillings, opening in concrete walls, floors and roofs n.exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work for fair finished surface complete all as specified and directed.
M&L for brickwork with flyash bricks, straight or curved on plan to any radius in half bricks thick walls, built in cement mortar (1:4) complete all as specified and directed.
M&L for rendering 5 mm thick in CM (1:3) on brick or concrete surfaces (in ceiling) etc finished even and smooth without using extra cement complete all as specified and directed.
Supply only integral water proofing compound complete all as specified and directed. (Make : Pidilite Industries/ Impermo/Snowcem India Ltd/Sika)
M&L for applying three coats of white wash on newly plastered surfaces of walls including preparation of surfaces complete all as specified and directed.
M&L for applying white wash three coats on newly plastered surfaces of ceiling including preparation of new surfaces for matching with repaired surfaces complete all as specified and directed.
M&L for 150mm bore of pipe reinforced concrete pipes, class NP2 laid and jointed complete with collars complete all as specified and directed
M&L for cement concrete 1 : 4 : 8 type D2 (using 40mm graded stone aggregate) incl packing under and haunching against the sides for 150mm internal dia SGSW pipes after they are laid and tested complete all as specified (thickness of concrete bed 100mm).
S&F vitreous china ware white WHB with flat back size 550 X 400 mm excluding tape waste chain and plug and procelain stopper but including brackets complete all as specified and directed.
Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.
M&L for 100 mm thick cement concrete type D-2, 1:4:8 (using 40 mm graded stone aggregate) as in sub base complete all as specified and directed.
M&L for machine pressed pre-polished precast concrete interlocking paver block any hape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment, complete all as specified and directed.
M&L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed
M&L for preparation on newly plastered surfaces on wall and applying two coats of cement based paint over priming coat of alkali resistant priming paint complete all as specified and directed.
M&L for brickwork with modular fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.
M&L extra for forming fair finish drain channel 45 cm inner grith in cement concrete using extra cement complete all as specified and directed
M&L for cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) in surface channels and drains for benching complete all as specified and directed
M&L for cement concrete type B-0 1:2:4 (using 12.5mm graded stone aggregate) in cills, steps, plinth courses, string courses, lacing courses, parapets, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directed rounded or chamfered on edges complete all as specified and directed.
M&L for 75 mm thick cement concrete type C-2, 1:3:6 (using 40 mm graded stone aggregate) as in plinth protection complete all as specified and directed.
M&L for 40 mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in floors, subfloors complete all as specified and directed.
M&L for RCC 1:1.5:3, type A-01, Nominal Mix (using 20mm graded stone aggregate) for beams, cantilivers, beressummers, lintels over 1.5m span complete all as specified and directed.
M&L for formwork to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantiliver shelves etc. for fair finished surface complete all as specified and directed.
M&L for 75mm thick PCC 1:4:8 type C2 (using 20mm graded stone aggregate) as in sub base complete all as specified and directed..
S&F PVC (SWR) vent cowels 75 mm bore complete all as specified and directed.
M&L for PVC connection 15mm dia of standard pattern 450mm long, with two Nos brass check nuts (adopts) and washers etc complete all as specified and directed
S&F PVC (SWR) P trap , dia of outlet 125mm, complete all as specified and directed.
S&F vitreous china squatting pan (Orissa pattern) long pan including provision of lime concrete bedding fixed in repair size 580x440mm white with intergral footrest with 'P' or 'S' trap complete (excluding flushing cistern and flush) complete all as specified and directed. (Make: Jaquar/equavalent)
S&F 125mm dia grating doom with waste hole of PTMT (Minimum weight 40 gms) fixed in cement mortar (1:3) complete all as specified and directed.
S&F vitereous china bowl urinal half stall type, complete including providing and fixing plus, bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe complete all as specified and directed.
S&F sliding door bolts, aluminum anodised with hasp and stapple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extruded sections, length of bolt sliding 300mm long complete all as specified and directed.
S&F steel ventilator with top hung shutter (minimum wt. of steel section should be 1.42 kg/M) including box type hinges, steel peg stay, complete with glazing bars, dovetailed or welded, including taking down existing unserviceable one including making good disturbed surfaces as per existing specfication complete all as specified and directed.
M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.50 Sqm in each panes complete all as specified and directed.
Supplying and laying of Supreme Eco drain Hi-tech pipe dranage sewer system pipe bearing 160 mm dia minimum 4mm thick including jointing with couplar ,bend tee as per site requerement complete laid in trenches or floors complete all as specified and directed. (Make : Supreme or equivalent make)
Removing excavated soil to a distance n.exc.50m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified and directed.
M&L for Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed
S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment using Fe 410 -W (Gde E- 250) quality A complete all as specified and directed.
S&F glass dividing strips ,38x3 mm thick and inserted in position to confirm the design complete all as specified and directed.
M&L for rendering 20 mm thick cement plaster in CM (1:4) on external fair faces of brick/concrete work surfaces finished even and smooth (without using extra cement) incl WPC complete all as specified and directed. (Note: WPC will be measured and paid separately).
Supply only integral water proofing compound complete all as specified and directed. (Make : Pidilite Industries/ Impermo/Snowcem India Ltd/Sika)
Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed with 2nd class hardwood complete all as specified and directed.
S&F 30 mm thick Flush shutters ,solid core construction ,with block board core and plywood panels, commercial type on both sides complete all as specified and directed.
S&F 35 mm thick 2nd class hardwood glazed and skeleton shutter open rebated and prepared to receive glass,gauge etc edges of framing plain, chamfered or rounded fitted with cut and mitred beads and rebated sash bars any numbers for securing glass ,wire cloth etc sizes of member as specified in SSR part- I and clause 8.24(a) supplied and fitted to chaukhat etc complete all as specified and directed by Engg-in-charge.
S&F steel ventilators with centre hung shutter (minimum wt. of steel section should be 1.42 kg/M) including two pairs of brasscup pivots, catch spring and pulleywheel, complete dovetailed or welded including pintol hinges, steel handles, etc. as shown with fixed type including one coat of red oxide zinc chrome primer complete all as specified and directed.
S&F steel windows with side hung shutters incl. box type hinges with steel handle and steel peg stay complete with glazing bars ,dovetailed or welded complete all as specified
All as per item No 129.00 mentioned here-in-above above but without glazing bars complete all as specified and directed
S&F sheet glass 3.0 mm thick, ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane complete all as specified and directed.
S&F stainless steel wire cloth ,0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F 200 mm long Aluminium, anodised, barrel tower bolt of extruded section complete all as specified and directed.
S&F 300 mm long aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy and fixed complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant priming paint applied over and smooth on wall complete all as specified and directed. (Make: M/s Tractor Acrylic Distemper of Asian/M/s Bison Acrylic Distemper of Berger, M/s No 1 Premium Acrylic Distemper of Shalimar)
M&L for 40 mm thick Damp proof course to horizontal or vertical surfaces incl. necessary form work in cement concrete 1:2:4 type B-0 (using 12.50 mm graded stone aggregate) complete all as specified and directed
S&F 25mm bore GI tubing medium grade in trenches / Floor / pillar connetion in old or new postion including fittings complete all as specified and directed. (Make: Bansal , Jindal)
All as per item No 137.00 mentioned here-in-above but 40 mm bore complete all as specified and directed
S&F 25 mm bore dia pipe gun metal globe or gate valves, yoke type, full opening with iron wheel head, screwed both ends heavy duty complete for iron pipes complete all as specified and directed.
S&F ball brass valves, high pressure, with polyethylene float and flynut complete, screwed for iron pipe or brass ferrule for 25mm bore complete complete all as specified and directed.
S&F rotational / moulded Polyehtylene water tank capacity of 1000 Ltr (Cylindrical vertical with closed top) four layer hoisted & fixed in position complete all as specified and directed. (Make: Sintex/Vectus/Prayag)
E/M PORTIONS Taking down carefully aluminium conductor point wiring (light,fan,socket or power) complete including fittings such as switches,ceiling roses, pendants, regulators ,sockets etc. and removing (except those to be reused shall be kept in safe custody at the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing complete all as specified and directed.
M&L for point wiring for light point/ fan point, one light/fan/ exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes/ modular, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)
M&L for point wiring for socket outlet 3 pin, 5 amps on Independent board controlled by one, one way switch using 2.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes/ modular, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 2.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)
All as per item No 144.00 mentioned here-in-before but 5 Amp socket on same board with other switches complete all as specified and directed.
M&L for wiring for socket outlet 3 pin, 15 amps on independent Boards controlled by one, one way switch using 4.0 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes/ modular , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 4.0 sqmm nominal cross sectioanl area multistranded copper conductor , PVC insulated unsheathed FRLSH cable earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)
S&F switch piano flush type, single pole , 5/6 Amps, one way complete all as specified and directed.
S&F switch socket combination 2 in 1 multipurpose 5 pin , (6 Amps ) flush type controlled by one switch complete all as specified and directed.
S&F socket outlets 2 in 1, 5/6 Amps, 230/240 V complete all as specified and directed. .( For Same Board only)
S&F switch socket combination 2 in 1 , 6 pin , (16 Amps ) flush type controlled by one switch complete all as specified and directed.
S&F ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified and directed.
S&F stepped type electronic fan regulator flush type 240 Volts ISI marked complete all as specified and directed.
S&F submain two single core, 4 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade drawing in and including suitable size PVC conduit (ISI marked), concealed, including 4 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified and directed.
S&F submain two single core ,6 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade drawing in and including nd including suitable size PVC conduit (ISI marked), concealed, including 6 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified and directed.
S&F in repair 01x 22 W LED batten light fittings, with T-8 tube rode, lighting fixture with extruded polycarbonate complete with all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing complete, complete all as specified and directed.
S&F in repair security light fittings 25 watts, minimumm lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65 including necessary connection complete suitable for pole dia 25mm complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size complete all as specified and directed.
S&F in repair 9 W LED light fitting wall mounted batten 2ft , extruded polycarbonate, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 9 watt , 6000K including necessary connection complete all as specified and directed.
S&F in repair wall mounted type decorative LED light with LED 9 watts yellow bulb, 50Hz complete with all accessories complete all as specified and directed.
S&F lamp holder, PVC/polycarbonate type with back plate straight or angular suitable for batten fittings complete all as specified and directed.
S&F LED bulb 7 watts, 240 volts, ISI marked complete all as specified and directed.
S&F socket with 25 Amps MCB, ISI marked, 240 Volts complete all as specified and directed.
S&F power unit, 25 Amps, ISI marked, 240 Volts complete all as specified and directed.
S&F steel body exhaust ventilation fan of sweep 600mm with louvers, cutting a suitable hple for exhaust fan and well finished after fixing complete all as directed by Engr-in-Charge.
S&F in repairs epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Single pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as specified and directed.
S&F in repairs epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Vertical Triple pole and neutral 415 V, 8 ways upto 250 Amps with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as specified and directed.
S&F in repairs MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Voltsand to be housed in DBs including necessry connection complete all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).
S&F in repairs MCB SP, 40 to 63 Amps, 'C' series 10kA, 240 Voltsand to be housed in DBs including necessry connection complete all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).
S&F in repairs MCB SPN 40-63 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. (Note : Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).
S&F MCCB 4 pole, 3 phase, 415 volt of capacity 125 Amp, 18 KA complete with proper copper thimbles, copper reducer etc all as directed.
M&L for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth wire electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth wire encased in and including 15 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion. (Note :- (i) If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department. (ii) Testing to be carried out by the contractor in presence of Engr- in- Charge , entered in the eath testing register, prepared and to be maintained by the contractor & submited to Concerned JE E/M. (iii) T&P and testing instrument(Meger) to be provided by the contractor at own cost).
S&F XLPE insulated armoured cable, 25 sqmm 4 core,1100 volts grade heavy duty cable,ISI marked passing through pipe, with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed complete all as sepcified.
Supply and lay for dry river sand filling for cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and directed. (Note : Punned thickness shall be measured seperately).
M&L for sub class B bricks locally available of size 25 x 12.5 x 7.5 cm laid dry width wise across the line of cable in trenches for protection of UG cable complete all as specified and directed
Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine including HDPE pipe of 150mm dia suitable for 0.4 mpa working pressure complete all as specified and directed.
Taking down ceiling for repair/maintenance of ceiling fan and replace unserviceable bush, bearing, spare parts and spray painting complete the repair work reassembling the fan after complete work hanging fan in same position connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.
S&F 01x 18 W LED batten light fittings, with T-8 tube, lighting fixture with complete all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing complete, complete all as specified and directed.
S&F MCB SPN 32 Amps, 'C' curve, 240 Volts,ISI marked and to be housed in DBs complete including necessry connection all as specified and directed. (Note : Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).
S&F XLPE armoured cable 10 sqmm 2 core,1100 volts grade heavy duty cable,ISI marked passing through pipe, with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed complete all as sepcified.
S&F switch socket combination, 5/16 Amps 5 in 1 flush type controlled by one switch complete all as specified and directed.
S&F in repair steel body Exhaust ventilation fan of sweep 300mm after taking out the existing burnt out fan complete all as directed by Engr-in-Charge.Make :- USHA or eqvt.
S&F 20 W LED ultra slim light fittings, lighting fixture with extruded polycarbonate complete with all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing complete all as specified and directed.
S&F XLPE insulated armoured cable, 16 sqmm 2 core,1100 volts grade heavy duty cable,ISI marked passing through pipe, with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed complete all as sepcified.
M/s BISWAJIT GHOSH
M/S SWAPAN KUMAR MONDAL
Hooghly Construction Co.
S. D. Construction Co.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .