70/EDC(H)/2024-25

Amount

Safe loading Carriage & unloading of following material from store centre to pit site/JE dump store.

PCC Pole of size 8.5 mtr long

ST pole 11 mtr. Long.

Stay Set Complete

11, 33 KV Pin with Net

Disc insulator With fitting (B&S) 70KN

MS Earthing Rod (2540x20 mm) With Fitting

ACSR Weasel Conductuctor

GI Wire

11 KV XLPE cable of size 3x70 sq.mm.

11 KV XLPE cable of size (3X120, 3x185, 3X300 sqmm)

LT XLPE Cable Aluminum 3.5×240mm2

LT XLPE Cable Aluminum 3.5×400mm2

LT XLPE Cable Aluminum 1×240mm2

LT XLPE Cable Aluminum 1×400mm2

Dog/Rabbit conductor

ABC (1X16+1X25)Sqmm

ABC (3X50+1X35+1X16)Sqmm

ABC (3X95+1X70+1X16 Sqmm)

ABC (3X120+1X95+1X16 Sqmm)

Cable box (3X70/3X120/3X185/3X300) Indoor & Outdoor

Replacement of Broken PCC single Pole and Errection of PCC Pole 8.5 mtr long with Grouting & with all accessories

Replacement of Broken PCC double Pole and Errection of PCC Pole 8.5 mtr long with Grouting & with all accessories

Replacement of Broken ST single Pole and Errection of ST Pole 11 mtr long with Grouting & with all accessories

Replacement of Broken ST double Pole and Errection of ST Pole 11 mtr long with Grouting & with all accessories

Re-Stringing of three phase ACSR Weasel Conductor for 11 KV line.

Tillted of PCC/ ST Pole.

Rebinding of Stay Set.

Laying of 11KV 3x70 sqmm single XLPE cable by digging of trench size 500 mm wide 900 mm after laying of brick, sand and stone slab.

Laying of 11KV (3X120, 3X185, 3X300 sqmm) single XLPE cable by digging of trench size 500 mm wide 900 mm after laying of brick, sand and stone slab.(Brick Sand and stone shall be provided by contractor.

Cable hoisting of 11 XLPE Cable on double pole (3X70, 3X120, 3X185 sqmm) including jumpering etc. complete with help of GI Pipe as per RESPO Norms.( All the Material Arrang by the contractor at his own cost.

Installation of Cable box11 KV Indoor & Outdoor

Installation of 33 KV Cable box Indoor & Outdoor

Stringing & Sagging of LT XLPE Cable Aluminum 1×400mm2

Stringing & Sagging of LT XLPE Cable Aluminum 3.5×400mm2

Stringing & Sagging of LT XLPE cable (1×240)sq.mm.

Stringing & Sagging of LT XLPE cable (3.5×240)sq.mm.

Stringing & Sagging ABC (1X16+1X25)Sqmm

Stringing & Sagging ABC (3X50+1X35+1X16)Sqmm

Stringing & Sagging ABC (3X95+1X70+1X16 Sqmm)

Stringing & Sagging ABC (3X120+1X95+1X16 Sqmm)

Placement of 11/0.4 KV T/Fs with the help of crane sleepers and man power etc. from dump place to newly constructed T/Fs plinth & erection & commissioning of 250/400/630 KVA T/Fs of T/F Plinth and including jumpering with the system (All the required martial for above work shall be provided by contractor except T/Fs)

Fabrication erection and commissioning of 25/16/10 KVA T/F on double/single pole with all accessories. All material except 25/16/10 KVA T/F shall be supplied by the contractor.

Construction of retaining wall, fabrication & erection of Wiremesh fencing of size 3 + 3 & 2.0 M height around Transformer and Distribution Pillar Box with retaining wall & 1 no. gate with locking arrangement made of MS Angle iron of size 50x50x6 mm jointed with nuts and bolts. The panel must be supported with MS Flat of size 50x6 mm. Wiremesh of size 10 SWG rectangle type, as per norms of RESSPO. (All the material will be arranged by the contractor at his own cost).

Construction of T/F plinth of size 2x2x1.5 m on a padding 0.25M deep in ground 1:5:10 cemend sand and brick ballast on the top of padding brick work Ist class brick of 0.95 mtr hight & 0.35 mtr wall will be constructed.Rest wall should be 0.23 mtr thick.brick work in ratio 1:4 cement & cores Sand in the hollow portion the sand should be fiilled from the ground level up to 15 centimeter below from the top of wall,Cement, sand & brick Ballasts should be filled up to 15 centimeter. Two no. of channel 100x50 in length 1500mm will be grouded.0.35 CM.RCC will be done with cores sand, cement and stone ballast in the ratio of 1:2:4.The T/Fs plinth should be plastered on all sides 12mm thick in ratio 1:6 by cement and cores sand.(All the material to be arranged by the contractor .)

Erection of Stay Set Complete.

Fixing of Ordinary earthing by 11 KV MS earth Rod 2500 mm long as per RESPO schedule.

Stringing of ACSR Weasel Conductor for 11 KV line

Stringing of Dog/Rabbit conductor for 33 KV line

Gaurding of 33 KV Line

Looping & chopping of tree branches for clearance of HT/LT line after clearance of line throughout pieces of tree branches of site (Approx 3 Km).

M/S S.K. CONTRACTOR AND SUPPLIER (BID ID -4817967)

Neeraj Electricals (BID ID -4822250)