Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.6 CrAdmitted-Finance | ₹4.6 Cr | L1 | Admitted-Finance |
| 2 | L2₹5.1 Cr+₹52.1 L (11.4%)Admitted-Finance B2 SECOND FLOOR EMPERIAL PLUS COMPLEX OPP SAIBABA TEMPLE ZANZARDA ROAD JUNAGADH JUNAGADH GUJARAT 362001 UDYAM GJ 11 0046235 | JUNAGADH | GUJARAT | 362001 | ₹5.1 Cr+₹52.1 L (11.4%) | L2 | Admitted-Finance |
| 3 | Not Admitted-Fee/PreQual/Technical | - | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
| 4 | Not Admitted-Fee/PreQual/Technical | - | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
| Sl No | Description | Qty | Unit | M/S AMAN AND CO L2 | M/S LONE ENTERPRISES L1 |
|---|---|---|---|---|---|
| 1.00(CIVIL) Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. | |||||
| 2.00 | All kinds of soil | 1,496 | cum | 140 ₹2,09,440 Lowest | 188.75 ₹2,82,370 |
| 3.00 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 min width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: | 3,491.5 | cum | 300 ₹10,47,450 Lowest | 400 ₹13,96,600 |
| 4.00Providing and laying in position S&S Centrifugally Cast (Spun)/ Ductile Iron Pipes conforming to IS : 8329 | |||||
| 5.00 | 100 mm dia Di pipe Class K - 7 Pipes | 3,950 | Mtr | 1,500 ₹59,25,000 | 1,108.15 ₹43,77,192.5 Lowest |
| 6.00 | Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket (100 mm dia pipes) | 718.18 | Joints | 110 ₹78,999.8 | 89.7 ₹64,420.75 Lowest |
| 7.00Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) Light | |||||
| 8.00 | 65 mm dia | 500 | Mtr | 925 ₹4,62,500 | 740 ₹3,70,000 Lowest |
| 9.00 | 50 mm dia. | 3,000 | Mtr | 700 ₹21,00,000 | 540 ₹16,20,000 Lowest |
| 10.00 | 40 mm dia. | 1,625 | Mtr | 570 ₹9,26,250 | 435 ₹7,06,875 Lowest |
Tender Value
₹4.7 Cr
Closing Date
29 Sept 2021, 4:00 pmClosed
Executive Engineer PHE Division Kupwara
Superintending Engineer Hyd Circle Kupwara HQ Handw
Composite tender for Providing L/F of supply mains an other necessary pipe network, Design/ Construction of Presettling Tank cum Sump, 0.45 lac Glns SR, Pump House , Collection Chamber, Spring protection, Sluice chambers, Chowkidar Qtr
2021_PHE_140025_1
E NIT 19 OF 09/2021
Open Tender
Pipe Laying Works
Item Rate
60 days
WORK
Please refer Tender documents.
5 documents required · 5 mandatory
₹5,000
Exen PHE Kupwara
Exempted
29 Oct 2021
17 Sept 2021
30 Sept 2021
17 Sept 2021
29 Sept 2021
17 Sept 2021
Amount
(CIVIL) Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.
All kinds of soil
Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 min width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:
Providing and laying in position S&S Centrifugally Cast (Spun)/ Ductile Iron Pipes conforming to IS : 8329
100 mm dia Di pipe Class K - 7 Pipes
Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket (100 mm dia pipes)
Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) Light
65 mm dia
50 mm dia.
40 mm dia.
25 mm dia.
20 mm dia.
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
Providing fixing of 10mm thick flanges to Gi pipes incl, cutting of threaded portion of Pipe, cost of welding nuts, bolts and insertion gasket laying/ jointing testing incl, cost of Gi pipes & all carriages from dumping site upto work shop and back to dumping site. Complete job
80mm dia
P/F of MS tees, bends fabricated as per requirement from 8mm thick MS sheet at site of work incl, man & mchinery for washout system at different locations complete (subject to actual)
Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. incl, tail pieces as per requirement of site & directions of Engineer In-Charge.
150mm dia
100mm dia
Providing and fixing of Gun Metal Gate valve/not return valve of approved quality (screwed end)
80mm dia
65mm dia
50mm dia
40mm dia
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete
50 to 80 mm nominal bore
25 to 40 mm nominal bore
Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc. if required will be paid separately).
50 mm dia.
Labour for cutting C.I. pipe with steel saw.100 mm diameter C.I. pipe
Providing of Laying of dry stone soling hand packed on level
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
Reinforced cement concrete work in walls (any thickness) including attached pilasters,buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
Reinforced cement concrete work in arches, archribs, domes, vaults shells, folded plate and roofs having slope more than 15° upto floor five level level including curing but excluding the cost of centering, shuttering finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
Reinforcement for R.C.C work including straightening cutting, bending, placing in position and binding all complete, Thermo-Mechanically treated bars.
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
Centering and shuttering including strutting, propping etc. and removal of form work for:
Foundations, footings, bases for columns
Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs and steps etc
Lintel, beams, plinth beams, girders, bressumers and cantilevers.
Suspended floors, roofs, landings, balconies and access platforms.
Edges of slabs and breaks in floors and walls
Arches, domes, vaults exceeding 6m span
Extra for shuttering in Circular work 20% of basic respective centering and shuttering items.
a)Foundations
b)Walls
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.(welded)
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge Made of G.I. wire of dia 4 mm
Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 0.50 mm thick with zinc coating not less than 275 gram/m2
Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete 0.50 mm thick with zinc coating not less than 275 gram/m2
Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin- charge. (Cost of aluminum snap beading shall be paid in basic item.) With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg / sqm)
Brick work with F.P.S bricks of class designaion 75 in foundation & plinth, superstructure upto floor V level in cement mortor (1 cement :6 coarse sand) septic tank
Cement concrete flooring 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate)finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc complete,50mm thick with 20mm nominal size stone aggregate. (crushed)
Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete In all colours, shades, except White, Ivory, Fume Red Brown
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, laid on 20 mm thick cement mortar 1:4 (1Cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete In colour such as White, Ivory, Grey, Fume Red Brown
Dry random rubble masonry with hard stone in foundation and plinth: With bond stone.
Providing and applying white cement based putty of specified thickness,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick
12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 coarse sand)
15mm Cement plaster on the rough side of single or half brick wall of mix:1 : 4 ( 1 cement : 4 fine sand)
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work
Providing & fixing White vitreous china water closet squatting pan(Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge Orissa pattern W.C Pan of size 580x440 mm
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc 15 mm dia. nominal bore
Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm nominal bore
Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent.
Providing and fixing C.P. brass angle valve for basin mixer and gyser points _of approved make conforming to IS : 8931 (15mm N.bore)
Providing and fixing C.P. brass close hole basin mixer piller tap of approved quality and make, weighing not less than 1.970 kg.915 mm nominal bore of standard back type)
White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
Providing and fixing Salem Stainless Steel A lSI 304 (18/8) kitchen sink as per I.S. 13983 with C.l. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever equired
Providing and fixing toilet paper holder C.P. brass.
Providing and fixing soil, waste and vent pipes 100 mm dia including earthwork, refilling etc complete job.
Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)
Providing and fixing PGI sheet strips 20cm wide at joints complete in all respects.
Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification (1 kg of water proofing material in 50 kg of cement)
Providing and fixing of Electrical points (heating and lighting) incld. cost of wire switches, necessary MCB’s switch boards, ceiling roses reputed make ISI mark screws, casing / conduit materials of allsorts of carriage and labour charges required for the job.
a. Lighting points.
b. Heating points.
P/F of exhaust fans 350mm size reputed make ISI mark incld. all carriage complete job.
Providing and installation of main cable from LT pole to main panel board 3 core under grounds or above as reqd. at site.
Hand packing of stones in wire crates( incld supply of stones, but excl cost of crate mesh) complete job as per requirement of site & direction of Engineer In-Charge
Supply of B.A wire 4mm thick crate mesh Machine voven (16’x16’) 100x100mm mesh with both ends plain as per proper and standard specification including all carriages.
Engagement of JCB/LNT for construction of approach road as per availability of land/as per requirement at site (subject to actual)
Suppying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5 em long wire springs manufacture from high tensile steel wire of adequate strength confirming to IS 4454 part1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover
Providing and fixing ball bearing for rolling shutters.
Carriage of pipes Di/Gi by Mechanical Transport from Srinagar Upto dumping Site of work including, loading, unloading and stacking avg lead 120Kms (subject to actual)
100mm dia Di
Below 100mm dia Gi pipe
Carriage of materials by Mechanical transport from source to Dumping Site of work incl, loading, unloading and stacking
Cement & steel for 20Kms
Sand for 40kms
Stone aggregate for 20kms
Bricks for 140kms
Stone & soling for 25kms
Carriage of materials by Manual Labours from Dumping Site Upto working site incl, loading, unloading and stacking
100mm dia Di for 500Mtrs
Below 100mm dia Gi for 700Kms
Carriage of materials by Manual Labours from Dumping Site Upto working site incl, loading, unloading and stacking 300Mtrs
Cement
Steel
Sand aggregate
Stone aggregate
Bricks
Stone/ soling
B) Various mechanical /electrical works to be carried out at proposed water supply scheme Laderwan (NABARD)
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
As per Annexure B
C) Construction of separate 110KV PHE feeder laderwan emnating from 6.3 MVA (The items are inclusive of cost of material, errection, testing, commissioning charges complete
100KVA Distribution Transformer
S.T Poles 9Mtr long (SP 540)
0.05 ACSR conductor
GI cross armwith top Bracket incl, clamp
11 KVA Pin insulators with pins complete
Earthing of poles complete
GI , CI cross Arms (75x40x40) 6mm 8'long
11 KV Disc insulators with fitting
11 KV GO swicth
11KV D.O fuse set
11KV lightending Arrester station type
LT fuse set
PVC cable 185 sqm
Alumunium thimbles 185MM2
Earthing of sub-stn pipe earthing complete per REC standard
Anti climbing Devies
Nuts bolts of sizes
Painting of poles
cement Bottoming
stay sets complete
11KVA panel withcale termination kits & gantery
M/S AMAN AND CO
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.33 MB
BOQ_290932.xls
BOQ • 0.39 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .