Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.3 LAdmitted-Finance | ₹26.3 L | L1 | Admitted-Finance |
| 2 | L2₹32.5 LAdmitted-Finance | ₹32.5 L | L2 | Admitted-Finance |
| Sl No | Description | Qty | Unit | M/S SHREYA ENTERPRISES L2 | ZIYA ABBAS L1 |
|---|---|---|---|---|---|
| 1.00Providing and laying 3 mm thick epoxy flooring in technical areas at all floor levels. The cost is inclusive of following operations. | |||||
| 1.10Removing all dirt ,loose material, Oil ,grease and foreign material etc from Floor by washing it from Soap etc | |||||
| 1.20Grind the concrete floor with the help of floor grinder with a 60-80 grit screen to flatten the surface and open its pores for better adhesion. Rubbing the CC Floor to make it in proper level and removing all local dips etc. | |||||
| 1.30Repair cracks and holes: Use a floor patch epoxy gel to fill any cracks or holes. Allow it to cure and then grind it smooth. | |||||
| 1.40Application of Primer:- After removing all moist from the surface ,Apply Nitoprime (Of FOSROC) -25 or equivalent @ 6.00Litre per sqm according to the manufacturer's instructions. Apply a thin, even coat of the primer using a roller. This seals the concrete and prevents bubbles from rising in the final coat. | |||||
| 1.50Allow the primer to dry for the time specified by the manufacturer, typically 12–24 hours. | |||||
| 1.60Base coat: - over primed surface applying Notoflor-EU5 (Of FOSROC) epoxy under layer of 2.0mm thick. The under layer shall be strong enough to withstand a minimum compressive strength of 60 N/ Sqmm, Flexural Strength of 20N / Sqmm and tensile strength of 10N/ Sqmm in 07 days .The under layer shall be Nil water absorption when tested as per IS BS -1881 Part 122-1983. | |||||
| 1.70Application of Final coat (Floor Topping) of Fosroc Nitoflor -SL- 1000 (Of FOSROC)of thickness 1mm over under layer coat of 2mm. The topping shall achieve a minimum compressive strength of 40 N/ Sqmm, Flexural strength of 25N / Sqmm when tested at 7th day after application as per BS-6319 .Further at 20 degree Centigrade it should be capable of accepting foot traffic at 24 hours and Vehicular traffic at 48 hours as per manufacturer specification . | |||||
| 1.80 | The cost is inclusive of all labour and material and machinery etc required in above mentioned operations . | 1,625 | Per Sqm | 1,999 ₹32.5 L | 1,620 ₹26.3 L |
Tender Value
₹26.0 L
EMD Value
₹51,903
Closing Date
21 Feb 2026, 6:00 pmClosed
EE (C)
BCD, CH-8, Chemmury Qtrs., A.G. Road New Delhi-110001
Construction of 13 building at various location in India for UNMS including finishing work, water supply and Sanitary Installation, Electric Installation and cable laying Automatic Fire detecting and Firefighting lifts, AC Ducting for HVAC, Split
2026_BSNL_267343_1
24/EE/BCD-I/ND/2025-26
Open Tender
Civil Works
60 days
Delhi Cantt
Please refer Tender documents.
4 documents required · 4 mandatory
₹590
AO ( Cash)
₹51,903
24 Feb 2026
16 Feb 2026
23 Feb 2026
16 Feb 2026
21 Feb 2026
16 Feb 2026
Providing and laying 3 mm thick epoxy flooring in technical areas at all floor levels. The cost is inclusive of following operations.
Removing all dirt ,loose material, Oil ,grease and foreign material etc from Floor by washing it from Soap etc
Grind the concrete floor with the help of floor grinder with a 60-80 grit screen to flatten the surface and open its pores for better adhesion. Rubbing the CC Floor to make it in proper level and removing all local dips etc.
Repair cracks and holes: Use a floor patch epoxy gel to fill any cracks or holes. Allow it to cure and then grind it smooth.
Application of Primer:- After removing all moist from the surface ,Apply Nitoprime (Of FOSROC) -25 or equivalent @ 6.00Litre per sqm according to the manufacturer's instructions. Apply a thin, even coat of the primer using a roller. This seals the concrete and prevents bubbles from rising in the final coat.
Allow the primer to dry for the time specified by the manufacturer, typically 12–24 hours.
Base coat: - over primed surface applying Notoflor-EU5 (Of FOSROC) epoxy under layer of 2.0mm thick. The under layer shall be strong enough to withstand a minimum compressive strength of 60 N/ Sqmm, Flexural Strength of 20N / Sqmm and tensile strength of 10N/ Sqmm in 07 days .The under layer shall be Nil water absorption when tested as per IS BS -1881 Part 122-1983.
Application of Final coat (Floor Topping) of Fosroc Nitoflor -SL- 1000 (Of FOSROC)of thickness 1mm over under layer coat of 2mm. The topping shall achieve a minimum compressive strength of 40 N/ Sqmm, Flexural strength of 25N / Sqmm when tested at 7th day after application as per BS-6319 .Further at 20 degree Centigrade it should be capable of accepting foot traffic at 24 hours and Vehicular traffic at 48 hours as per manufacturer specification .
The cost is inclusive of all labour and material and machinery etc required in above mentioned operations .
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.15 MB
BOQ_310799.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid