SPL REP TO BLDDG NO EW16 AN PORTION OF DEO OFFICE IN BLDG NO EW14 AND BLDG NO T9 LAO OFFICE AND PROVN OF CAR PARKING SHED NEAR BLDG NO P 5 AND INTERLOCKING TILE BETWEEN DRAIN AND ROAD ALONG NORTH WALL OF MANEKSHAW INTEGRATED SPORT COMPLEX AT DANAPUR

Amount

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) including all type of tiling, marble chips , terrazo finish where ever existing etc all as specified and directed.

Dismantling of floor, walls tiles incl bedding but backing and rubbish off permises all as specified.

Demolition of reinforcement cement concrete above the ground floors n exc 15 cm thickness (Reinforcement cut as required to facilitate demolition) such as cooking platform, chajjas etc

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.18 sqm & not exceeding 0.38 sqm in floors etc over and including 15 mm thick screed bed in cement mortar 1:6 set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed

M&L for glazed skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.11 sqm & not exceeding 0.18 Sqm , in vertical surface such as skirtings, dados etc, over and including 10 mm thick cement plaster in cement mortar 1:4 fixing of wall tile set and jointed in neat cement slurry and pointed in white or coloured cement complete all as specified and directed

M&L for Non -Skid Ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm , in floors etc over and including 15mm thick screed bed in cement mortar 1:6. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

M & L for 15 mm thick screed bed or bedding layers of cement mortar 1:6 for laying of floor finishes complete all as specified and directed

M&L 25 mm thick cement concrete (1:2:4), type B-0, using 12.50 mm graded stone aggregate as in floors including finishing the surface rough & even for receiving kota/tiles complete all as specified and directed

M&L Coloured glazed ceramic tiles (450 x 300)x 6 to 7mm thick on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or colored cement to match complete including 10 mm thick rendering on fair faces of brick work or concrete surfaces, in cement mortar 1:4 for shade, pattern and laying of tiles complete all as specified and directed.

M&L for 10 mm thick plaster in cement mortar 1 : 4 for fixing of wall tiles complete all as specified and directed..

Demolition of brick work built in cement mortar including all quions, arches, pillars, complete all as specified and as directed.

M&L brick work with sub class ‘B’ bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and as directed.

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 in half brick thick wall.

M&L PCC 1:4:8 type D-2 (40mm graded stone agg) in fdn, sub base, mass concrete & cinder concrete etc. complete.

M&L 75 mm thick PCC 1:3:6 type C-1 using 20mm graded aggregate as in plinth protection finishing even & fair without using extra cement laid in bays with construction, 6mm thick joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 gde and three part of sand ( all by weight) complete all as specified and directed

M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate for insertion of hold fast incl necessary form work etc all complete.

M&L for providing precast cement concrete of RCC 1:2:4 type B-1 (using 20mm graded stone agg) for landings, chajjas, shelves and similar articles with plain faces etc. with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match the shade set in CM 1:4 including necessary form work complete all as specified and directed.

Taking down cement plaster on wall/ceiling roof etc including raking out joints, hacking for key and scrubbing down with water etc all as specified and directed.

M&L Rendering 15mm thick in cement mortar 1:6on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete. Note : Liquid WPC will be measured and paid separately.

M&L rendering 5mm thick in cement mortar 1:3 on concrete surfaces of ceiling and finishing the surfaces even and smooth without using extra cement complete all as specified and directed .

Supply only water proofing compound (liquid),ISI marked complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 sqm each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt), all as specified and directed.

~Ditto~ all as per item No 23.00 above but exc 1.5 Sqm but n exc 4 Sqm each complete all as specified and directed.

Taking down shutter of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed.

S&F 2nd class hard wood 35 mm thick glazed and gauzed skelton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut bead and shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed

S & F of 35 mm thick (Batten thickness) factory made plain, framed, panelled shutters (Two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces and size of the members of shutter are as per IS – 1003 (Part – I) made of kiln seasoned & chemically pressure treated 2nd class hardwood complete all as specified and directed.

S & F for Flush shutters 35 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed .

S & F steel window with side hung shutters including projecting or box stype hinges with steel handle peg stay and divided into square with glazing bars dovetailed or welded, to receive glazing, or gauzing including one coat of primer with including fixing of hold fast of size 25 x 5 mm flat iron etc complete all as specified and directed.

~Ditto~ all as per Srl item No. 29.00 above but without glazing bar complete all as specified and directed.

S & F steel ventilator with top hung shutter including hinges peg stay to receive glazing or gauzing with and including, fixing of hold fast size 25 x 5 mm of flat iron etc and over including one coat of primer complete all as specified and directed.

S&F Mild steel framed works such as grills,gratings,etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work for portions framed and hung as gates, including pintle hinges, stops, hand made sliding bolts, including welding etc conforming to Fe 290 Gde -E-165 complete all as specified and directed.

S & F pressed steel frame of size 105 X 60 mm and 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc., complete all as specified and directed.

S & F pressed steel frame of size 125 X 60 mm and 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc., complete all as specified and directed.

S&F Mild steel works as in hold fasts, clamps, plain angle cleats for securing purlins to wood trusses or rafters, cooler stands and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, in opening as per specification and drawing complete all as specified and directed

S&F factory made solid PVC moulded door shutter 28 to 30mm thick (stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face S&F in frame as per specification and drawing.

SS&F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.

S&F aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 300 mm long complete all as specified and directed.

S&F mild steel, 150mm long ordinary helical door spring incl roller and roller plate complete

S&F 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 150 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 100 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 150 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified.

S&F 100 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified.

S&F floor door stopper 140 mm overall length of cover plate of aluminium alloy body and tongue, anodised. With hard drawn spring, fixed in floor. complete as directed by Engr-in-charge

S&F small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including MS butt hinges, medium weight, cold rolled 50mm long, articles n exc 200 Cu cm each of Ist class soft wood complete all as specified and directed.

S&F GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple complete all as specified.

S&F in repair GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple complete all as specified.

Hacking out old boken glass (any thickness, size, quality or description) from wooden frames/steel frames glazed with oil putty or fixed with beads complete.

S&F 3 mm thick sheet glass, ordinary quality, and glazing with oil putty in square/rectangle n exc 0.50 sqm in each pane, complete all as specified and directed

~Ditto~ all as per Srl item No 51.00 above but figured glass. complete all as specified and directed

S & F in repairs venetian blinds vertical type 100mm wide slats made out of fabric cloth of approved shade fixed as per the instructions of manufacturers and all as specified by the Engr-in-Charge.

S&F in repair mild steel conduit curtain rod with PVC coating fancy type curten rod 25 mm dia of any colour as approved complete.

S&F mild steel Bracket with PVC coating fancy type for curten rod 25 mm dia of any colour as approved complete.

Taking up or down steel tubing and connections, 15 mm dia complete all as specified and directed.

Taking up or down steel tubing and connections, 20 mm dia complete all as specified and directed.

S&F Tubes, ‘medium grade’ galvanized iron, with all fittings and fixed to walls and ceilings or laid in floors of 15 mm dia complete all as specified and directed.

S&F tubes medium grade galvanized iron with all fittings and fixed to walls and ceiling or laid in floors of 20mm bore complete all as specified and directed.

Fixing only 15 mm bore galvanised steel water tubing medium grade with and including all new fittings and fixed to walls and ceilings or laid under floors, including cleaning for re-fixing of old pipe complete all as specified and directed. Note:- Old pipe shall be used retrived from item Srl No. 56.00.

Fixing only 20 mm bore galvanised steel water tubing medium grade with and including all new fittings and fixed to walls and ceilings or laid under floors, including cleaning for re-fixing of old pipe complete all as specified and directed. Note:- old pipe shall be used retrived from item Srl No. 57.00

S&F in repair vitreous china WHB size 550x400 mm white flat back including pvc waste pipe but excluding taps, waste, chain & plug & porcelain stopper but including brackets with two coats of synthetic enamel painting over a coat of red oxide primer etc complete all as specified and directed.

S & F in repairs Vitreous china under counter wash hand basin oval size 590 x 420 x195 mm including cutting for and pinning in ends of brackets or erecting stand complete with CP waste coupling & waste pipe fixed complete all as specified and directed (Make : Jaquar cat part no CNS WHT- 705 or equivalent of make specified in particular specification)

S & F in repairs Vitreous china wash down water closet pan ( pedestal pattern ) cascade type of size 365 X 635 X 770 mm coloured with cistern (with twin flush fittings) complete including seat cover and fixing of flushing cistern, brackets, flushing pipe, complete all as specified and directed (Make : Jaquar cat part no CNS WHT 353N, CNS WHT 203 or equivalent of make specified in particular specification)

S&F single lever extended Basin Mixer (height 85mm) with pop up waste system with 450mm long Braided Hoses complete all as specified and directed. (Make : Jaquar cat part no CON-321KNB or equivalent of make specified in particular specification)

S&F CP towel ring, fancy type complete all as specified and directed (Make : Jaquar cat part No AQN-7721or equivalent of make specified in particular specification)

S&F CP toilet paper holder with flap recessed type (stainless steel), fancy type complete all as specified and directed (Make : Jaquar cat part No AHS-1553 or equivalent of make specified in particular specification)

S & F Head Shower (Health Faucet) with 8mm dia, 1.2m long Flexible tube & wall hook complete all as specified and directed (Make : Jaquar cat part No ALD-573 or equivalent of make specified in particular specification)

S & F soap dispenser with glass bottle complete all as specified and directed (Make : Jaquar cat part No AKP-35735P or equivalent of make specified in particular specification)

S & F in repairs Vitreous china urinal size 355 x 345 x535 mm complete with waste pipe, CP urinals spreader & auto closing concealed urinal flush valve with wall flange complete all as specified and directed (Make : Jaquar cat part no URS WHT- 13261 & PRS-073 or equivalent of make specified in particular specification)

S&F powder coated anodised aluminium frame & shutters sliding or casement type for door/window/ventilator with one or more rebates including joining cleats, glazing clips, rubber packing, aluminium snap beading, screw etc for fixing complete.

S&F in repair water closet white vitreous china ware Orissa pattern of size 580x440mm with integral foot rest ‘P’ or ‘S’ trap front or back inlet incl provision of PCC bedding type B1, 1:2:4 ( 20 mm graded stone aggregate) and connection pipes ( excluding flushing cistern but including flushing pipe 32 mm dia MS chromium plated) complete all as specified and directed.

S&F in repair PVC valve less, syphonic action type flushing cistern of 10 ltr capacity, low level with inlet, ball valve, float and handle including brackets incl PVC connection with CP brass nuts on both sides complete all as specified and directed .

S&F in repairs PVC connections with 2 Nos check nuts PTMT nut 450mm long, 15mm bore complete all as specified and directed. .

S&F in repairs Bib taps, cast copper alloy, chromium plated , screwed down, high pressure, screwed for iron pipe or for brass ferrule of 15mm dia complete all as specified and directed.

Supply and fixing in repair 15mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated , screwed down high pressure, with or without lettered ‘hot’ or ‘cold’ with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

S&F in repair brass CP towel rail, 20mm dia, D type,60cm long complete all as approved complete all as specified and directed.

S&F in repairs stop cocks, cast copper alloy, chromium plated with long shank and cup (concealed type), high pressure with capstan head handle, screwed both ends for iron pipe or for unions of 15 mm dia complete all as specified and directed.

S & F as in repair 15 mm dia angle cock, chromium plated, cast copper alloy, fancy type, screwed down high pressure with capstan head screwed both ends for iron pipe or for union complete all as specified and directed.

S&F PVC (SWR) 'P' trap for 110 mm dia etc complete.

M&L for RCC as in kitchen platform, shelves & chajjas etc type B1 1:2:4 (20 mm graded stone aggregate) complete all as specified and directed .

M&L for 18 to 20 mm thick granite slab (of any type) work (table rubbed and polished) in cooking platforms, steps, window cills, incl edge moulding & cutting holes for gas pipe through drill machine and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

S&F in repairs sinks with drainge board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S&F TMT bars, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hoopinbg for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Taking down PVC/AC pipes (including all fittings), with spigot and socket ends and lead joints including burning out joints of 100/75 mm dia pipe complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floors,trenches with brackets etc of 110 mm dia complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with brackets etc of 110 mm dia complete all as specified and directed.

~Ditto~ all as per Srl item No 89.00 above but 75 mm bore complete all as specified and directed.

S&F PVC (SWR) bends/ shoes any radius of 110 mm dia complete all as specified and directed.

S&F PVC (SWR) bends any radius provided with access door of 110 mm dia complete all as specified and directed.

S&F PVC (SWR) bends any radius provided with access door of 75 mm dia complete all as specified and directed.

S&F PVC (SWR) branch pieces, single (equal or un equal) , ordinary or inverted (spigot or socket type) or with parralled branches of 110 mm dia with access door complete all as specified and directed.

~Ditto~ all as per item Srl No. 94.00 above but 75 mm bore complete all as specified and directed.

S&F PVC (SWR) vent cowl of 110 mm dia complete all as specified and directed.

S&F PVC (SWR) nahani/ floor trap, plain with grating with or without waste hole including jointing with solvent cement 75mm dia etc complete

S&F PVC (SWR) multi floor trap with grating including jointing with solvent cement 75 mm dia etc complete.

Dismantling water tanks of capacity exc 250 and n exc 500 ltrs complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks (three layer cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I of 500 Ltr capacity including CP tank nipple complete all as specified and directed.

S&F Ball valves 20mm dia high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete all as specified and directed.

S&F in repairs Gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe complete all as specified and directed.

S&F in repair Solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing compete all as specified and directed by Engr-in-Charge.

Dismantling wall and ceiling board (fiber, pulp, PVC, insulation etc) or insulation boards / slabs / blankets, any thickness including cover fillets complete all as specified and directed.

Dismantling AC/CGI (corrugated, semi corrugated etc), as in roof covering complete.

Dismantling unframed timber scantling 40 Sq cm and over in section, in any position complete all as specified.

S & F for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre, size of grid 605mm x 605mm complete all as specified and directed.

S & F for hangers 6 mm dia GI (upto 1200mm length adjusting level fixed to roof/slabs by means of ceiling cleats made out of GI flat 40X30 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed.

M & L for 6 mm thick Non asbestos fibre cement building boards fixed or laid / inserted to timber / GI / Aluminium framework with screws complete all as specified and directed.

S & F for rolled mild steel structural steel work as in trusses in (tubular/rectangular/square) including purlins, rafter, special shaped washer etc. complete using any dia of MS pipe medium grade/angle or using ERW or induction butt welded tubes/angles conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

M & L for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

M & L for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of primer complete.

M & L for preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete.

Removing old paints by paint removes or burning off by blow lamps and cleaning with scrapers, any number of coats,any width or girth complete.

M&L Preparing old wooden surfaces exceeding 10Cm in width or girth and applying two coats of synthetic enamel paint complete.

M&L Preparing old steel surfaces exceeding 10Cm in width or girth and applying two coats of synthetic enamel paint complete.

M&L for applying 2mm thick Birla / JK Putty in two layers on old wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed.

M & L for preparation of newly plastered surfaces of wall & concrete and applying 2 mm thick wall care putty including preparation complete all as specified and directed.

M&L for preparation of newly plastered surface of wall applying two coats of oil bound distemper on wall over a coat of primer on prepared surfaces complete all as specified and directed.

M&L preparation of new plastered or unplastered surfaces of wall and applying two coats of cement based paint over and including one coat of primer complete all as specified and directed.

M&L Preparing old painted surfaces of walls, chajjas etc by washing rubbing down and stopping and applying two coat of cement base paint white or tinted complete all as specified as directed.

M&L for two coats of weather coat paint (apex) over a coat of primer on new surfaces on wall including preparation of newly/Old plastered surfaces complete all as specified and as directed by Engr-in-Charge. (Make: asian, Durolex or equivalent)

M&L for 10mm thick Light shade vitrified ceramic tiles in floors, exceeding 0.36 sqm but not exceeding 0.42 sqm set & jointed in neat cement slurry and pointed in coloured cement to match including15mm thick screed bed in CM 1:6 complete all as specified & directed.

M&L for 10mm thick Dark shade vitrified ceramic tiles in floors, exceeding 0.36 sqm but not exceeding 0.42 sqm set & jointed in neat cement slurry and pointed in coloured cement to match including15mm thick screed bed in CM 1:6 complete all as specified & directed.

M&L for cutting holes into or through brick walls exc half brick but n exc one brick wall built in cement mortar and wall of cement concrete for inserting of rolled mild steel structural steel work and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required all as specified

S&F 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etcfixed with Jor L type hook bolt complete all as spd and directed.

S& F 6mm thick Asbestos cement two piece adjustable plain wing ridge fixed with Jor L type hook bolt complete all as spd and directed.

Fixing only except sheet of 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etcfixed with Jor L type hook bolt complete all as spd and directed.

M&L brick work with sub class ‘B’ bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 but except bircks complete all as specified and as directed.

S&F in repair door closer hydraulically regulated, aluminium (extruded section) body, designation No.2, universal type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 kg complete all as specified & directed.

S & F powder coated Anodised aluminium section in existing partion or door frame or door shutter or window frame swing or sliding and ventilator including aluminium clip cleat, sashbars, glazing clips, rubber packing , aluminium anodised beading etc of approved size and thickness including drilling holes in walls, ceiling, floors with screws and rawl plugs etc including taking down and refixing after necessary and all as specified and directed. Make - Jindal, Hindalco or equivalent.

M&L double action floor spring for aluminium doors hydraulically regulated made up of minimum 1.5 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed including necessary cutting & making good to floor as per existing complete all as specified and directed.

S&F 4 mm thick figured sheet glass pin head type fixed in aluminium ventiliators with necessary rubber and powder coated aluminium snap beading complete all as specified. Make : Modi Float, Saint Gobin

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple complete all as specified.

18/19 mm prelaminated particle board exterior grade prelaminated one side with decorative choice lamination and other side balancing white laminated fixed with steel screws to frame complete all as specified and directed.

S & F IInd class hard wood plain solid straight chowkats and frames wrought framed rebates on the solid, rounded or chamfered put together with glue pinned at joints supplied and fixed complete all as specified and directed.

S&F 125 mm long Butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as spd and directed.

S&F 150 mm extruded brass handle, fabricated type, polished complete all as specified and directed.

S&F 300 mm long, Brass Sliding door bolt with sand or die cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolt and fixed.

S&F 200 mm long brass barrel tower bolts with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed

M & L for Hardcore of gauge exc. 63 mm but not exc. 100 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken bricks complete all as specified and directed.

M&L for sand filling under floors or in foundations/floor ncluding watering and consolidation complete all as specified and directed.

M&L for Machine Pressed precast glazed colour reflective PCC interlocking paver block 60 mm thick mixed with grey cement and pigment, laid dry and bedded on sand cushion complete all as specified and as directed. The pattern of paver block shall be approved by GE. Note: Payment of sand cushion shall be measured and paid separately.

Supply only 38mm wide glass dividing strips, 3mm thick complete all as specified and directed

M&L Cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in levelling course, roof padding, coping, similar items, etc complete including necessary scaffolding and demolition of existing coping complete all as specified and directed. . (Note : The contractor may please be included rate of scaffolding at any height) complete all as specified and directed

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exc 10 CM girth all as specified and directred

M&L for Galvanized steel water tubing of 32mm bore medium grade with all fittings fixed in walls, ceiling or laid in floors complete, all as specified.

Dismantling water tanks and removing to store of capacity exc 500 and n exc 1000 ltrs complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks three layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I of 1000 Ltr capacity including CP tank nipple and PVC float valve 20 mm dia high pressure with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed Make : Sintex (Ist quality) bearing ISI mark

S&F in repair nipple suitable for HDPE water tank (min weight 15mm-38gms) complete all as specified and directed

S&F in repair nipple suitable for HDPE water tank (min weight 20mm-45gms) complete all as specified and directed

S&F Gun-metal, globe or gate valves 15mm, with iron wheel head, screwed both ends for iron pipe etc complete all as specified and directed by EIC .

S&F in repairs vitreous china urinal half stall type, white colour including brass CP water spreader fixing with 16 mm bore pipe complete all as specified. Make : Hindustan/Parryware (Superfine)/Cera (Ist quality)/Jaquar

S&F CP waste coupling of 32 mm bore dia of discharge pipe fixed to urinal complete all as specified.

S&F in repairs white vitreous china wash down water closet pan pedestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe complete all as specified and as directed. Make Parryware(Superfine), Cera (Ist Quality), Jaquar

M&L for glazed coloured tiles (Digital pattern) including highlighter (450x300x7mm thick) in vertical surfaces such as skirting/dados/wall, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces including10mm thick screed bed in CM 1:4. complete all as specified and as directed

S&F in repair brass CP two way angle valve with wall flanges 15 mm bore, screwed down, screwed for iron pipe or for brass ferrule complete.

M&L for plain cement concrete 1:3:6 type C-0 (using 12.5 mm graded stone aggregate), as in back filling of pressed steel frames and similar worked including necessary from work as required complete as specified and directed.

S&F CP grating doom 125 mm dia with waste hole of ISI marked complete all as specified.

M/L PVC(SWR) door Tee of 110mm dia etc complete all as specified and directed

Excavation in Post holes(or similar holes)each no exc 0.5 CUM getting out ,returning filling in & ramming earth or broken rubble mixed with earth around in layers not exc25cm ,watering & removing surplus soil to distence n. exc 50 m & making good surface in soft soil complete all as specified and directed

M&L for PCC 1:3:6 type B2 ( 40mm graded stone agg) as in mass concrete for post holecomplete all as specified and directed

Materials and labour for plain cement concrete (1:5:10) Type E2 using 40mm graded stone aggregate in sub base of floor complete all as specified and directed.

M & L for mild steel Plates (plain or chequered) channels,Fe 410-W (grd-E-250) quality square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed

Taking down carefully copper / aluminium point wiring (light, fan, switch, socket or power, Bell & Two way point) complete with fitting such as switches, sockets, ceiling rose, sketch light fittings etc, and making good the disturbed surface of walls and floors etc complete all as specified and directed.

Taking down carefully main switches DB's/ MCB DB's with MCB and making good the disturbed surfaces of walls complete all as specified and directed.

Taking down carefully copper / aluminium sub main wiring including teak wood batten / conduit and making good the disturbed surface of walls complete all as specified and directed.

M&L Point wiring complete with cable PVC, insulated, unsheathed, 1100 volts grade conforming to IS-694, 1.5 Sq mm (nominal area) FRLS stranded with copper conductor single core drawn through and including non metallic rigid PVC conduit 20mm dia,medium grade and conduit accessories concealed wiring system by cutting of wall and making good in walls disturbed surface, with sunken type pressed steel/welded MS terminal boxes not less than 1.6mm thick MS Sheet concealed in wall with hold fasts duly painted with two coat of black bituminious paint over a coat of red oxide, 3 mm thick laminated sheet cover for mounting of fittings like switches, socket outlets, regulators etc., including a run of PVC insulated unsheathed 1.5 Sq mm FRLS copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed for the following: -

One light/ fan point controlled by one, one-way switch, SP, 5 Amps complete all as specified & directed.

One bell / buzzer point controlled by one push button complete all as specified & directed

One 5 pin 5 Amps socket out let point on the same board with other switches complete all as specified & directed

One switch socket outlet, 5 pin, 5 Amps, SP, on independent board complete all as specified & directed.

~Ditto~ All as per item No. 169.00 above but with 2.5 Sq mm cable for One 3 Pin, 5/15 Amps switch socket outlet on independent board complete all as specified and directed.

S&F Switch Piano, flush type, single pole, one way, 5 Amps, 230 Volt grade, ISI marked complete all as specified and directed.

S&F Switch Piano, flush type, single pole, one way, 15 Amps, 230 Volt grade, ISI marked complete all as specified and directed.

S & F socket outlet flush type multipurpose 2 in 1 , 3 pin 5 and 15 Amp, 230 volts complete all as specified & directed.

S&F bell push single pole one way 6 Amp 240 volts, flush type complete all as specified & directed.

Supply and fixing LED street light fitting 1x25 watts capacity incld all accessories and lamps complete with bracket of suitable size complete with flat iron clamps two nos fixed in the wall with grouted nut, bolts all as spd Make : CG / Bajaj/ Havells (for bldg security light)

S&F ceiling rose surface bakelite 63.50 mm dia, three terminals, complete all as specified & directed.

S&F for batten angular fitting complete all as specified and directed.

S&F electronic Fan regulator 450 watt step type complete all as specified and directed.

S&F Bell multi music type AC 230 Volts,single pole complete all as specified and directed.

Supply and fixing double door TPN DBs four way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral & DB's will be fitted concealed in wall / surface as per site required complete all as specified and directed .

Supply and fixing double door SPN DBs eight way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral as per existing finishing complete all as specified and directed .

Supply and fixing with MCB SPN 5 to 40 amps 10 KA ,C-series including connection with suitable size aluminium / copper lugs complete all as specified and directed .

Supply and fixing MCB SP 240 volts 5 to 32 Amps, 10 KA breaking capacity, 'C' type including connection with suitable size aluminium / copper lugs complete all as specified and directed .

Supply and fixing MCB TPN 50 to 63 amps 10 KA ,C-series including connection with suitable size aluminium / copper lugs complete all as specified and directed .

S&F in LED tube light fitting batten type single tube 1x 18/20 watt 230 volt wall/ ceiling mounted luminaire industrial type made of sheet metal box type suitable for T- 8 tube complete with electronic driver and bipin holder including one No tube 18/20 watt fixed with wall/ceiling incl fittings accessories and connecting with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size all as specified. Make of tube light fitting- Havells Cat No: REGALBATTENT8UPTO1X22WDSBSWH or equivalent model of Bajaj / Wipro/Crompton Greaves Make of Tube:- Havells Cat No. CRYSTAL1213T8DSTL18WLED865SGLASS or equivalent model of Bajaj/Philips/ CG.

S&F in LED tube light fitting single tube 1x 9 watt 230 volt wall mounted luminaire industrial type made of sheet metal box type suitable for T- 8 tube complete with electric electronic driver and bipin holder including one no tube18/20 watt fixed with wall/ceiling incl fittings accessories and connecting with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size all as specified. Make :- Havells Cat No. LUMILINEBS9WLED840SPCWH or equivalent model of Bajaj/Philips/ CG.Jaquar electric/Orient Electric

Supply and fixing LED bulk head 10 watt fittings environmental friendly ultra modern energy saving surface mounted decorataive bulk head fitting with driver and prewired and necessary electric connection with PVC insulated twin twisted flexible copper wire of size 0.75 Sqmm complete all as specified and as directed. Make: Havell's Cat No: HEXAFT10WLED857SSYMBOPC or equivalent model of Bajaj/CG/PhilipsJaquar electric/Orient Electric

S & F LED surface mounted fitting 36/42 watt including driver ultra modern designed architectural LED luminaire which provides soft-light and glare free symmetrical illumination suitable for Armstrong / Grid ceiling incl fittings accessories and connecting with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size complete all as specified and directed Make Jaquar electric/Orient Electric/Philips/bajaj

Supply and fixing metal body air fan / ventilator with louver 300 mm sweep and grouting with nut , bolts & Fastenar on the wall and make good the disturbed surface and electric connection with 1.5 Sqmm three core PVC insulated round flexible copper conductor and sheathed cable upto ceiling rose complete all as specified and directed .

M&L sub main wiring with 2 run of 4.00 sqmm (nominal cross-sectional area) PVC insulated (FRLS) unsheathed single core cable of working voltage 1100 volts grade with multi stranded copper conductor including one run of 2.50 sqmm (nominal cross sectional area) PVC insulated (FRLS) unsheathed cable with stranded copper conductor as continuous earth wire connected in common earth dolly drawn in PVC rigid non- metallic conduit complete all as specified and as directed. (NOTE : (i) PVC non rigid nonmetallic conduit shall be measured & paid separately under relevant item of this Schedule ‘A’. (ii) Two run of submain wiring cable alongwith one run of earth wire shall be measured as one length). Make of cable:-Polycab/Havell's/ Finolex

Supply & fixing in repair Sheet metal earth plug, socket, single pole and neutral with single pole MCB 32 Amps 240 volts complete all as specified and as directed.

Supply and fixing MCCB 63 amps 16 KA, 4 pole including connection with suitable size aluminium / copper lugs complete all as specified and directed. Make: Legrand/Schneider/L&T.

Supply and fixing LED light fitting for bldg security lighting energy saving & environmental friendly long life versatile pressure die-cast housing with individual high power LED as light source and lens embedded PC cover of capacity 25 watt 240 volts AC 50 Hz , IK 07 and IP 66 protection suitable for 40 mm dia GI pipe bracket including complete all as specified and directed. Make: Havells Cat No: ENDURAPEARLSL25WLED757SASYTOPCMP /CG/PHILIPS/BAJAJ/Jaquar electric/Orient Electric

M & L for security wall light bracket made out of GI pipe light grade 25 mm dia 1.2 metre length bent to shape and reduced to required size at top upto 1.5 metre length by cutting, welding and well finishing including MS clamp of flat iron of size 40x6 suitable length 2 sets complete with drilling, hole, fixing with nuts bolts and washers including painted with two coats of aluminium paints over a coat of red oxide primer including dismantling old u/s bracket complete all as specified and as directed.

Earthing complete with galvanised steel earth plate electrode 600mm X 600 mm X6.30mm thick burried directly in ground (earth plate not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to and including GI earth lead of Gi wire 4 mm size by means of steel bolts,nuts, check nuts and washers, PCC 1:2:4 type B-1 in pit, angle iron 25X25X3mm frame work with precast RCC 1:2:4 type B-1 cover reinforced with 8mm dia TMT bars @ 150mm C/C both ways abd 12mm dia MS fabricated handle, medium grade GI watering pipe 20mm bore with funnel, wire mess and light grade GI protection pipe 40mm bore upto 5m lenght for drawing in earth lead ,salt,charcol etc. including excavation and earth work in any type of soil , removal of surplus soil to a distance not exceeding 50m complete all as shown in electrical plate No. 5 of MES schedule 2009 part-I and connected complete all as specified including testing on completion

Supply , laying & testing for XLPE insulated, armoured, heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, laid in trenches, sleeving through pipes or fixed on poles & walls or laid under floors including jointing with suitable size aluminium lugs complete of size 16 Sqmm nominal cross section x 4 core.Make of cable: Polycab/Havell's/Finolex/Grandlay/Mescab

Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc. 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.

Removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

M & L dry sand cushioning to underground cables with 8cm thick before laying of cables and 15cm thick after laying and stretching of cable and gentally hand ramming and consolidation etc. complete all as specified and directed. Note :- Thickness of sand 18 cm thick shall be measured after punning of sand.e.

S & F socket out let flush type 5Amps, 5 pin ,240volt complete all as specified and directed.

M & L for old size sub class ‘B’ bricks, laid in trenches as cable covers / protection complete all as specified and directed .

M/S PRAVIN ENTERPRISES

SINHA CONSTRUCTION

HARINANDAN RAI SONS

Vijay Bakshi and Son

jaglalchoudharyandsons

B.K. ROY & SONS

Shri Atoshe Tuccu