REPAIR/ REPLACEMENT OF PROTECTION DEVICES, SUBMAIN WIRING, LED LIGHT FITTING OF ZORAWAR ENCLAVE, QSP AND JACOB ENCLAVE INCLUDING MISC WORK UNDER AGE E/M-II OF GE (N) MAMUN

Amount

Taking down carefully unsv/damaged copper/aluminium surface (batten/coduit or casing caping) point wiring for light/fan/socket or power including unscrewing from board (fitting and fixture such as switches, sockets, ceiling rose, lamp holders, brackets, pendent, regulators, sockets, Bracket /sketch fitting etc) and removing material from site and making good to the disturbed surface to match with existing finish etc complete all as specified and directed.

Point wiring using FRLS PVC insulated unsheathed /multi stranded copper conductor cable 1.5 sqmm including 1.5Sqmm FRLS PVC insulated unsheathed copper conductor earth wire drawn through and including concealed PVC conduit for light and fan of not less than 25 mm dia and 1.8 mm thick including all fitting viz tees, bend, junction box and Polycarbonate rectangular box for mounting switches, sockets, fan regulators etc with 3mm thick plastic laminated sheet cover of suitable size, connecting earth including cutting groves for concealed wiring, making good to disturb surface of wall/floor with cement mortar and finishes to match existing including connection of cable with MCBs or bus bar shall be done through proper size copper/brass thimble of pin/u type etc (conduit shall be fixed on surface of ceiling with necessary saddles where concealing of conduit is not feasible), for light/fan/ Exhaust fan point etc complete all as specified and directed.

All as per Srl item No. 2 above but for 5 pin 5 Amp socket outlet point on independent board controlled by one switch 5Amp one way, etc complete all as specified and directed.

All as per Srl item No. 2 above but for 5 Pin 5 Amp socket outlet points controlled by one switch 5 Amps one way on same board, etc complete all as specified and directed.

All as per Srl item No. 2 above but one light point controlled by two, two way switches, etc complete all as specified and directed.

Ditto, all as per item No 2 here in before but using 2.5 sqmm (nominal area) multistranded copper conductor cable & 2.5 sqmm size FRLS PVC insulated and unsheathed copper conductor cable as earth conductor ( green colour) for one 6 pin socket outlet 15Amp multi purpose independent point controlled by 15 Amp switch SP, one way, 240 Volts, complete all as specified and directed.

Point wiring using FRLS PVC insulated unsheathed /multi stranded copper conductor cable 1.5 sq mm including 1.5Sqmm FRLS PVC insulated unsheathed copper conductor earth wire drawn through existing conduit fixed on surface of wall/ ceiling with Polycarbonate rectangular box for mounting switches, sockets, fan regulators etc with 3mm thick plastic laminated sheet cover of suitable size, connecting earth including connection of cable with MCBs or bus bar shall be done through proper size copper/brass thimble of pin/u type, for light/fan/bell point including taking out unservicable point wiring including unscrewing from board (fitting and fixture such as switches, sockets, ceiling rose, lamp holders, brackets, pendent, regulators, sockets, Bracket /sketch fitting etc) and removing material from site etc complete all as specified and directed.

All as per Srl item No. 7 above but for 5 pin 5 Amp socket outlet point on independent board controlled by one switch 5Amp one way, etc complete all as specified and directed.

All as per Srl item No.7 above but for 5 Pin 5 Amp socket outlet points controlled by one switch 5 Amps one way on same board, etc complete all as specified and directed.

All as per Srl item No. 7 above but one light point controlled by two, two way switches, etc complete all as specified and directed.

All as per item No 7 hereinbefore but using 2.5 sqmm (nominal area) multistranded copper conductor cable & 2.5 sqmm size FRLS PVC insulated and unsheathed copper conductor cable as earth conductor ( green colour) for one 6 pin socket outlet 15Amp multi purpose independent point controlled by 15 Amp switch SP, one way, 240 Volts, complete all as specified and directed.

Switch piano flush type, single pole, 5 Amp, one way, AC 230 volts etc complete, all as specified and directed.

Switch piano flush type, single pole, 5 Amp, two way, AC 230 volts etc complete, all as specified and directed.

Switch piano flush type, single pole, 15 Amp, one way, AC 230 volts etc complete, all as specified and directed.

Socket outlet, 2 in 1, 3 pin, 5 Amp, flush type, AC 230 volts etc complete all as specified and directed .

Socket outlet, 2 in 1, 3 pin, 5 Amp & 15 Amps, flush type, AC 230 volts etc complete all as specified and directed .

Ceiling rose polycarbonate isolated body surface Bakelite4, three terminals, AC 230 volts etc complete all as specified and as directed.

S& F stepped type electronic fan regulator hum free socket type upto 100 watt suitable control the speed of fan 0-100% 230 volt complete all as specified and directed

Sub main wiring with PVC insulated unsheathed 2X6 sqmm multistranded copper conductor cable 1100 V drawn through & including PVC concealed conduit with 1X6 sqmm PVC insulated green copper cable for continuous earth, PVC conduit not less than 25 mm dia & 1.8mm wall thickness with all accessories including cutting grooves and making good disturbed surface to match existing including taking down existing surface sub main wiring etc complete all as specified and directed.

Replacement of 28 watt electronic ballast heavy duty in sleek housing with lead in wires for easy connection suitable for T-5 FTL fittings of any make/pattern including taking out existing unserviceable ballast etc complete all as specified and directed.

Replacement of 28 watt rod 4 feet long heavy duty suitable for T-5 FTL fittings of any make/pattern including taking out existing unserviceable rod etc complete all as specified and directed.

S & F in replacement SPN MCB DB 4 way sheet metal enclosures double door 230 V AC, 50 Hz AC complete all as specified and directed.

S & F Double door pre-wired MCB DB made out of CRCA sheets, powder coated with copper bus bar SPN 240 Volts, 8 ways double door openable complete, including taking out old unsv MCB DB of any ways/type, etc complete all as specified and directed.

S & F in replacement SPN MCB DB 12 way sheet metal enclosures double door 230 V AC, 50 Hz AC complete all as specified and directed.

Double door MCB DB TPN ,415 Volts 4 way made out of CRCA sheets, powder coated IP 43 protection with copper bus bar taking out old unsv MCB DB of any ways/type, etc complete all as specified and directed.

Double door VTPN vertical DB, 415 Volts 4 Way(8+12 modules) made out of CRCA sheets, powder coated with copper bus bar double door openable complete as per IS8623-III, impact resistance IK09,X160 for MCCB incommer and SP/TP MCB as outgoing, with accessories 160 Amp rated copper bus bar, blanking plate cable management kit ec,conforming to IP 43 etc complete all as specified and directed.

S & F in replacement High efficiency LED linear tube 1X18 watt, 6500 K, 230 volts wall mounted with LED batten(Channel box type) complete with all accesssories internely pre wired and including connecting up with three core twisted flexible copper conductor cable of suitable size.Cat Part No- For LED lamp LL13-181-650 & Batten (Channel) WIO921208 Make of - Wipro or Make - Equivalent in Havells, philips, Bajaj and CG. Notes : 1. Driver shall be potted antivibration type. 2. LM-79 and LM-80 test report with 1 lakh burning hours LED life from NABL lab shall be provided . 3. CRI (Colou Rendering Index) of fixture shall be > 70. 4. CCT (Colout Correlated Temprature of fixture shall be 5700+300K. 5. System Lumen Efficacy shall be > 100Lm/W. 6. 10 KV separate surge Protection shall be provided as a part of fitting. 7. 5 years gurantee shall be provided by contractor supported by OEM covering all parts of luminaire. 8. Lenses shall be Modular Type. 9. PCB used shall be MC PCB type. 10. The defect liability period of LED light shall be 05 years from the certified date of completion & the contractor shall replace/repair the defective fitting within 07 days after handing over to contractor for repacement /repair.

S & F in replacement High efficiency LED linear tube 1X20 watt, 6500 K, 230 volts wall mounted with LED batten(Channel box type ) complete with all accesssories internely pre wired and including connecting up with three core twisted flexible copper conductor cable of suitable size.Cat Part No- For LED(T-8) lampLHLDDCXCML8Q020 & Batten (Channel) LHFXCENNTN1W020 Make of - Havells or Make - Equivalent in Wipro, philips, Bajaj and CG. Notes : 1. Driver shall be potted antivibration type. 2. LM-79 and LM-80 test report with 1 lakh burning hours LED life from NABL lab shall be provided . 3. CRI (Colou Rendering Index) of fixture shall be > 70. 4. CCT (Colout Correlated Temprature of fixture shall be 5700+300K. 5. System Lumen Efficacy shall be > 100Lm/W. 6. 10 KV separate surge Protection shall be provided as a part of fitting. 7. 5 years gurantee shall be provided by contractor supported by OEM covering all parts of luminaire. 8. Lenses shall be Modular Type. 9. PCB used shall be MC PCB type. 10. The defect liability period of LED light shall be 05 years from the certified date of completion & the contractor shall replace/repair the defective fitting within 07 days after handing over to contractor for repacement /repair.

S & F in replacement of intenso LXS LED Batten 4 FEET 1X18 watt, 6500 K, 230 volts wall mounted extruded thermoplastic body with PC diffuser in square shape complete with all accesssories internely pre wired and including connecting up with three core twisted flexible copper conductor cable of suitable size.

S & F in replacement of Aelius 20 watt T8 with high Lumen LED Tube with PC cover/PC body CR 1780 , 6500K, PC/PC 4 FEET 230 volts complete all as specified and directed.

S & F in replacement LED mirror light, 1 x 7 watt prewired with all accessories including complete with all accesssories internely pre wired and including connecting up with three core twisted flexible copper conductor cable of suitable size.

S&F in replacement the Bulk head light fitting LED type 10 watt complete with 10 watt LED and having IP-63 protection and fixing on wall/ceiling complete with all accessories and including connecting up with ceiling rose with & including PVC insulated and overall sheathed flexible copper conductor cable and including 3 core 0.50 Sqmm complete all as specified and directed.

S&F LED Building light 1x25 watt made out of pressure die-cast aluminium with polycarbonate LENS for cover IP65 protection including 32mm bore GI pipe bracted mounted using clamps, nuts bolts, washers, fastners etc. Complete all as specifed and directed .

Supply , installation ,commisioning and testing of heavy duty Exhaust Fan of metal body and blades single 220 volts 50Hz 1400/900 RPM 300 mm sweep turbo Jet complete etc inclduing shutters cutting of suitable size hole and making good to surface with existing surface to wall providing mounting bolts, nuts, screws, fasteners, making of mounting base frame as per site requerment all as specified and directed.

Supply , installation ,commisioning and testing of heavy duty Exhaust Fan of metal body and blades single 220 volts 50Hz 1400/900 RPM 350 mm sweep turbo Jet complete etc inclduing shutters cutting of suitable size hole and making good to surface with existing surface to wall providing mounting bolts, nuts, screws, fasteners, making of mounting base frame as per site requerment all as specified and directed.

S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

Supply and fix LED lamp 12 watts 230 volts retfrofit suitable for any type lamp holder as required.

S&F MCB single pole with neutral 240 volts 40 Amps, 10KA (B-series) etc complete all as specified and directed.

S&F MCB single pole with neutral 240 volts 63 Amps, 10KA (B-series) etc complete all as specified and directed.

S&F MCB single pole with neutral 240 volts 32 Amps, 10KA (B-series) etc complete all as specified and directed.

S&F MCB Single pole 240 volts, 6 to 32 Amps, 10KA (B-series) etc complete all as specified and directed.

S&F MCB single pole 240 volts 40 Amps, 10KA (B-series) etc complete all as specified and directed.

S&F MCB TPN 63 Amp 415 Volts 25 KA complete all as specified and directed.

S&F MCB TPN(Four Pole) 100 Amp 415 Volts complete all as specified and directed.

S&F MCCB TPN 100 Amp 415 Volts 25 KA complete all as specified and directed.

S&F MCCB TPN 125 Amp 415 Volts 25 KA complete all as specified and directed.

S & F in replacement recess mounting LED flat panel 2'x2' made of CRCA sheet steel duly powder coated with High efficient 30 watt LED and glare free full opal diffuser IP20 complete with all accessories internely pre wired and including connecting up with three core twisted flexible copper conductor cable of suitable size.

Supply only switch socket combination with indicator 05/10 Amps complete all as specified and directed .

Supply only switch socket combination 3-in-1, 15 Amps with safety shutter complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode, 600mm x 600mm x 6mm thick, buried directly in the ground (earth pit not less than 2.25m deep below normal (ground level) with top edge of the plate not less than 1.50m below ground level connected to galvanized iron wire 4mm dia as earth lead by means of bolts, nuts and washers of GI up to test point, GI tubing 15mm bore light grade protection pipe, GI watering pipe 20mm bore medium grade with funnel and wire mesh, charcoal and salt, 40mm thick pre-cast RCC (1:2:4) type B-0 (Nominal mix) cover reinforced with XPM (weighing n.less than 4 Kg/Sqm) with suitable steel handle, and angle iron 40X40X3mm frame and chamber of PCC (1:3:6) type C-0 (including earth work in any type of soil, removal of surplus soil to a distance n.exc.50m) and connecting, testing on completion, all as shown on electric plate No. 03 of SSR-2009 Part-I, complete all as directed. Notes: 1. Earth lead & protection pipes length upto & including 7.50 metre. 2. Earth filling shall be done by vegetable soil. 3. Soil should be free from stone, boulders, aggregate, gravels etc.

Supply, inatallation,connection & testing of temper proof elecronic energy meter , 240 Volts 50 hz single phase multi features rating 5-30 Amp satatic energy meter ISI marked with backlite LCD digital display like KWH,V,I KW,PF conforming to (IS -5133 Part -II)with polycarbonate body complete all as specified and directed .

Unnati Engineers

M/S Vijay Punj Constructions